aboutsummaryrefslogtreecommitdiff
path: root/fs/cifs
AgeCommit message (Collapse)Author
2008-11-26[CIFS] fix regression in cifs_write_begin/cifs_write_endJeff Layton
The conversion to write_begin/write_end interfaces had a bug where we were passing a bad parameter to cifs_readpage_worker. Rather than passing the page offset of the start of the write, we needed to pass the offset of the beginning of the page. This was reliably showing up as data corruption in the fsx-linux test from LTP. It also became evident that this code was occasionally doing unnecessary read calls. Optimize those away by using the PG_checked flag to indicate that the unwritten part of the page has been initialized. CC: Nick Piggin <npiggin@suse.de> Acked-by: Dave Kleikamp <shaggy@us.ibm.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-20[CIFS] Do not attempt to close invalidated file handlesSteve French
If a connection with open file handles has gone down and come back up and reconnected without reopening the file handle yet, do not attempt to send an SMB close request for this handle in cifs_close. We were checking for the connection being invalid in cifs_close but since the connection may have been reconnected we also need to check whether the file handle was marked invalid (otherwise we could close the wrong file handle by accident). Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-18[CIFS] fix check for dead tcon in smb_initSteve French
This was recently changed to check for need_reconnect, but should actually be a check for a tidStatus of CifsExiting. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-18prevent cifs_writepages() from skipping unwritten pagesDave Kleikamp
Fixes a data corruption under heavy stress in which pages could be left dirty after all open instances of a inode have been closed. In order to write contiguous pages whenever possible, cifs_writepages() asks pagevec_lookup_tag() for more pages than it may write at one time. Normally, it then resets index just past the last page written before calling pagevec_lookup_tag() again. If cifs_writepages() can't write the first page returned, it wasn't resetting index, and the next call to pagevec_lookup_tag() resulted in skipping all of the pages it previously returned, even though cifs_writepages() did nothing with them. This can result in data loss when the file descriptor is about to be closed. This patch ensures that index gets set back to the next returned page so that none get skipped. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Acked-by: Jeff Layton <jlayton@redhat.com> Cc: Shirish S Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-18Fixed parsing of mount options when doing DFS submountIgor Mammedov
Since these hit the same routines, and are relatively small, it is easier to review them as one patch. Fixed incorrect handling of the last option in some cases Fixed prefixpath handling convert path_consumed into host depended string length (in bytes) Use non default separator if it is provided in the original mount options Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Igor Mammedov <niallain@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-17[CIFS] Fix check for tcon seal setting and fix oops on failed mount from ↵Steve French
earlier patch set tcon->ses earlier If the inital tree connect fails, we'll end up calling cifs_put_smb_ses with a NULL pointer. Fix it by setting the tcon->ses earlier. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-17[CIFS] Fix build breakSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-17cifs: reinstate sharing of tree connectionsJeff Layton
Use a similar approach to the SMB session sharing. Add a list of tcons attached to each SMB session. Move the refcount to non-atomic. Protect all of the above with the cifs_tcp_ses_lock. Add functions to properly find and put references to the tcons. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-15[CIFS] minor cleanup to cifs_mountSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-14cifs: reinstate sharing of SMB sessions sans racesJeff Layton
We do this by abandoning the global list of SMB sessions and instead moving to a per-server list. This entails adding a new list head to the TCP_Server_Info struct. The refcounting for the cifsSesInfo is moved to a non-atomic variable. We have to protect it by a lock anyway, so there's no benefit to making it an atomic. The list and refcount are protected by the global cifs_tcp_ses_lock. The patch also adds a new routines to find and put SMB sessions and that properly take and put references under the lock. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-14cifs: disable sharing session and tcon and add new TCP sharing codeJeff Layton
The code that allows these structs to be shared is extremely racy. Disable the sharing of SMB and tcon structs for now until we can come up with a way to do this that's race free. We want to continue to share TCP sessions, however since they are required for multiuser mounts. For that, implement a new (hopefully race-free) scheme. Add a new global list of TCP sessions, and take care to get a reference to it whenever we're dealing with one. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-14[CIFS] clean up server protocol handlingSteve French
We're currently declaring both a sockaddr_in and sockaddr6_in on the stack, but we really only need storage for one of them. Declare a sockaddr struct and cast it to the proper type. Also, eliminate the protocolType field in the TCP_Server_Info struct. It's redundant since we have a sa_family field in the sockaddr anyway. We may need to revisit this if SCTP is ever implemented, but for now this will simplify the code. CIFS over IPv6 also has a number of problems currently. This fixes all of them that I found. Eventually, it would be nice to move more of the code to be protocol independent, but this is a start. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-13[CIFS] remove unused list, add new cifs sock list to prepare for ↵Steve French
mount/umount fix Also adds two lines missing from the previous patch (for the need reconnect flag in the /proc/fs/cifs/DebugData handling) The new global_cifs_sock_list is added, and initialized in init_cifs but not used yet. Jeff Layton will be adding code in to use that and to remove the GlobalTcon and GlobalSMBSession lists. CC: Jeff Layton <jlayton@redhat.com> CC: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-13[CIFS] Fix cifs reconnection flagsSteve French
In preparation for Jeff's big umount/mount fixes to remove the possibility of various races in cifs mount and linked list handling of sessions, sockets and tree connections, this patch cleans up some repetitive code in cifs_mount, and addresses a problem with ses->status and tcon->tidStatus in which we were overloading the "need_reconnect" state with other status in that field. So the "need_reconnect" flag has been broken out from those two state fields (need reconnect was not mutually exclusive from some of the other possible tid and ses states). In addition, a few exit cases in cifs_mount were cleaned up, and a problem with a tcon flag (for lease support) was not being set consistently for the 2nd mount of the same share CC: Jeff Layton <jlayton@redhat.com> CC: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-03[CIFS] Can't rely on iov length and base when kernel_recvmsg returns errorSteve French
When retrying kernel_recvmsg, reset iov_base and iov_len. Note comment from Sridhar: "In the normal path, iov.iov_len is clearly set to 4. But i think you are running into a case where kernel_recvmsg() is called via 'goto incomplete_rcv' It happens if the previous call fails with EAGAIN. If you want to call recvmsg() after EAGAIN failure, you need to reset iov." Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-11-03cifs: fix renaming one hardlink on top of anotherJeff Layton
cifs: fix renaming one hardlink on top of another POSIX says that renaming one hardlink on top of another to the same inode is a no-op. We had the logic mostly right, but forgot to clear the return code. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-30[CIFS] fix error in smb_send2Steve French
smb_send2 exit logic was strange, and with the previous change could cause us to fail large smb writes when all of the smb was not sent as one chunk. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-29[CIFS] Reduce number of socket retries in large write pathSteve French
CIFS in some heavy stress conditions cifs could get EAGAIN repeatedly in smb_send2 which led to repeated retries and eventually failure of large writes which could lead to data corruption. There are three changes that were suggested by various network developers: 1) convert cifs from non-blocking to blocking tcp sendmsg (we left in the retry on failure) 2) change cifs to not set sendbuf and rcvbuf size for the socket (let tcp autotune the buffer sizes since that works much better in the TCP stack now) 3) if we have a partial frame sent in smb_send2, mark the tcp session as invalid (close the socket and reconnect) so we do not corrupt the remaining part of the SMB with the beginning of the next SMB. This does not appear to hurt performance measurably and has been run in various scenarios, but it definately removes a corruption that we were seeing in some high stress test cases. Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: handle the TCP_Server_Info->tsk field more carefully cifs: fix unlinking of rename target when server doesn't support open file renames [CIFS] improve setlease handling [CIFS] fix saving of resume key before CIFSFindNext cifs: make cifs_rename handle -EACCES errors [CIFS] fix build error [CIFS] undo changes in cifs_rename_pending_delete if it errors out cifs: track DeletePending flag in cifsInodeInfo cifs: don't use CREATE_DELETE_ON_CLOSE in cifs_rename_pending_delete [CIFS] eliminate usage of kthread_stop for cifsd [CIFS] Add nodfs mount option
2008-10-23[PATCH] move executable checking into ->permission()Miklos Szeredi
For execute permission on a regular files we need to check if file has any execute bits at all, regardless of capabilites. This check is normally performed by generic_permission() but was also added to the case when the filesystem defines its own ->permission() method. In the latter case the filesystem should be responsible for performing this check. Move the check from inode_permission() inside filesystems which are not calling generic_permission(). Create a helper function execute_ok() that returns true if the inode is a directory or if any execute bits are present in i_mode. Also fix up the following code: - coda control file is never executable - sysctl files are never executable - hfs_permission seems broken on MAY_EXEC, remove - hfsplus_permission is eqivalent to generic_permission(), remove Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-10-23[PATCH] fix ->llseek for more directoriesChristoph Hellwig
With this patch all directory fops instances that have a readdir that doesn't take the BKL are switched to generic_file_llseek. Signed-off-by: Christoph Hellwig <hch@lst.de>
2008-10-23cifs: handle the TCP_Server_Info->tsk field more carefullyJeff Layton
cifs: handle the TCP_Server_Info->tsk field more carefully We currently handle the TCP_Server_Info->tsk field without any locking, but with some half-measures to try and prevent races. These aren't really sufficient though. When taking down cifsd, use xchg() to swap the contents of the tsk field with NULL so we don't end up trying to send it more than one signal. Also, don't allow cifsd to exit until the signal is received if we expect one. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-23cifs: fix unlinking of rename target when server doesn't support open file ↵Jeff Layton
renames cifs: fix unlinking of rename target when server doesn't support open file renames The patch to make cifs_rename undoable broke renaming one file on top of another when the server doesn't support busy file renames. Remove the code that uses busy file renames to unlink the target file, and just have it call cifs_unlink. If the rename of the source file fails, then the unlink won't be undoable, but hopefully that's rare enough that it won't be a problem. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-23[CIFS] improve setlease handlingSteve French
fcntl(F_SETLEASE) currently is not exported by cifs (nor by local file systems) so cifs grants leases based on how other local processes have opened the file not by whether the file is cacheable (oplocked). This adds the check to make sure that the file is cacheable on the client before checking whether we can grant the lease locally (generic_setlease). It also adds a mount option for cifs (locallease) if the user wants to override this and try to grant leases even if the server did not grant oplock. Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-21[CIFS] fix saving of resume key before CIFSFindNextJeff Layton
We recently fixed the cifs readdir code so that it saves the resume key before calling CIFSFindNext. Unfortunately, this assumes that we have just done a CIFSFindFirst (or FindNext) and have resume info to save. This isn't necessarily the case. Fix the code to save resume info if we had to reinitiate the search, and after a FindNext. This fixes connectathon basic test6 against NetApp filers. Signed-off-by: Jeff Layton <jlayton@redhat.com> CC: Stable <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-20cifs: make cifs_rename handle -EACCES errorsJeff Layton
cifs: make cifs_rename handle -EACCES errors Some servers seem to return -EACCES when attempting to rename one open file on top of another. Refactor the cifs_rename logic to attempt to rename the target file out of the way in this situation. This also fixes the "unlink_target" logic to be undoable if the subsequent rename fails. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-20[CIFS] fix build errorSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-20fs/Kconfig: move CIFS outAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20vmscan: split LRU lists into anon & file setsRik van Riel
Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20[CIFS] undo changes in cifs_rename_pending_delete if it errors outSteve French
The cifs_rename_pending_delete process involves multiple steps. If it fails and we're going to return error, we don't want to leave things in a half-finished state. Add code to the function to undo changes if a call fails. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-20cifs: track DeletePending flag in cifsInodeInfoJeff Layton
cifs: track DeletePending flag in cifsInodeInfo The QPathInfo call returns a flag that indicates whether DELETE_ON_CLOSE is set. Track it in the cifsInodeInfo. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-17cifs: don't use CREATE_DELETE_ON_CLOSE in cifs_rename_pending_deleteJeff Layton
cifs: don't use CREATE_DELETE_ON_CLOSE in cifs_rename_pending_delete CREATE_DELETE_ON_CLOSE apparently has different semantics than when you set the DELETE_ON_CLOSE bit after opening the file. Setting it in the open says "delete this file as soon as this filehandle is closed". That's not what we want for cifs_rename_pending_delete. Don't set this bit in the CreateFlags. Experimentation shows that setting this flag in the SET_FILE_INFO call has no effect. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-16[CIFS] eliminate usage of kthread_stop for cifsdJeff Layton
When cifs_demultiplex_thread was converted to a kthread based kernel thread, great pains were taken to make it so that kthread_stop would be used to bring it down. This just added unnecessary complexity since we needed to use a signal anyway to break out of kernel_recvmsg. Also, cifs_demultiplex_thread does a bit of cleanup as it's exiting, and we need to be certain that this gets done. It's possible for a kthread to exit before its main function is ever run if kthread_stop is called soon after its creation. While I'm not sure that this is a real problem with cifsd now, it could be at some point in the future if cifs_mount is ever changed to bring down the thread quickly. The upshot here is that using kthread_stop to bring down the thread just adds extra complexity with no real benefit. This patch changes the code to use the original method to bring down the thread, but still leaves it so that the thread is actually started with kthread_run. This seems to fix the deadlock caused by the reproducer in this bug report: https://bugzilla.samba.org/show_bug.cgi?id=5720 Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-16[CIFS] Add nodfs mount optionSteve French
Older samba server (eg. 3.0.24 from Debian etch) don't work correctly, if DFS paths are used. Such server claim that they support DFS, but fail to process some requests with DFS paths. Starting with Linux 2.6.26, the cifs clients starts sending DFS paths in such situations, rendering it unuseable with older samba servers. The nodfs mount options forces a share to be used with non DFS paths, even if the server claims, that it supports it. Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at> Acked-by: Jeff Layton <jlayton@redhat.com> Acked-by: Igor Mammedov <niallain@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-12[CIFS] cifs: remove pointless lock and unlock of GlobalMid_Lock in ↵Jeff Layton
header_assemble We lock GlobalMid_Lock in header_assemble and then immediately unlock it again without doing anything. Not sure what this was intended to do, but remove it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-08[CIFS] Check that last search entry resume key is validSteve French
Jeff's recent patch to add a last_entry field in the search structure to better construct resume keys did not validate that the server sent us a plausible pointer to the last entry. This adds that. Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-07[CIFS] make sure we have the right resume info before calling CIFSFindNextSteve French
When we do a seekdir() or equivalent, we usually end up doing a FindFirst call and then call FindNext until we get to the offset that we want. The problem is that when we call FindNext, the code usually doesn't have the proper info (mostly, the filename of the entry from the last search) to resume the search. Add a "last_entry" field to the cifs_search_info that points to the last entry in the search. We calculate this pointer by using the LastNameOffset field from the search parms that are returned. We then use that info to do a cifs_save_resume_key before we call CIFSFindNext. This patch allows CIFS to reliably pass the "telldir" connectathon test. Signed-off-by: Jeff Layton <jlayton@redhat.com> CC: Stable <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-07[CIFS] clean up error handling in cifs_unlinkSteve French
Currently, if a standard delete fails and we end up getting -EACCES we try to clear ATTR_READONLY and try the delete again. If that then fails with -ETXTBSY then we try a rename_pending_delete. We aren't handling other errors appropriately though. Another client could have deleted the file in the meantime and we get back -ENOENT, for instance. In that case we wouldn't do a d_drop. Instead of retrying in a separate call, simply goto the original call and use the error handling from that. Also, we weren't properly undoing any attribute changes that were done before returning an error back to the caller. CC: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-10-06[CIFS] fix some settings of cifsAttrs after calling SetFileInfo and SetPathInfoJeff Layton
We only need to set them when we call SetFileInfo or SetPathInfo directly, and as soon as possible after then. We had one place setting it where it didn't need to be, and another place where it was missing. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-24cifs: explicitly revoke SPNEGO key after session setupJeff Layton
cifs: explicitly revoke SPNEGO key after session setup The SPNEGO blob returned by an upcall can only be used once. Explicitly revoke it to make sure that we never pick it up again after session setup exits. This doesn't seem to be that big an issue on more recent kernels, but older kernels seem to link keys into the session keyring by default. That said, explicitly revoking the key seems like a reasonable thing to do here. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-24cifs: Convert cifs to new aops.Nick Piggin
cifs: Convert cifs to new aops. This patch is based on the one originally posted by Nick Piggin. His patch was very close, but had a couple of small bugs. Nick's original comments follow: This is another relatively naive conversion. Always do the read upfront when the page is not uptodate (unless we're in the writethrough path). Fix an uninitialized data exposure where SetPageUptodate was called before the page was uptodate. SetPageUptodate and switch to writeback mode in the case that the full page was dirtied. Acked-by: Shaggy <shaggy@austin.ibm.com> Acked-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-24[CIFS] update DOS attributes in cifsInode if we successfully changed themSteve French
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-24cifs: remove NULL termination from rename target in CIFSSMBRenameOpenFIleJeff Layton
cifs: remove NULL termination from rename target in CIFSSMBRenameOpenFIle The rename destination isn't supposed to be null terminated. Also, change the name string arg to be const. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-24cifs: work around samba returning -ENOENT on SetFileDisposition callJeff Layton
cifs: work around samba returning -ENOENT on SetFileDisposition call Samba seems to return STATUS_OBJECT_NAME_NOT_FOUND when we try to set the delete on close bit after doing a rename by filehandle. This looks like a samba bug to me, but a lot of servers will do this. For now, pretend an -ENOENT return is a success. Samba does however seem to respect the CREATE_DELETE_ON_CLOSE bit when opening files that already exist. Windows will ignore it, but so adding it to the open flags should be harmless. We're also currently ignoring the return code on the rename by filehandle, so no need to set rc based on it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-24cifs: fix inverted NULL check after kmallocJeff Layton
cifs: fix inverted NULL check after kmalloc Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-23[CIFS] clean up upcall handling for dns_resolver keysSteve French
We're given the datalen in the downcall, so there's no need to do any calls to strlen(). Just keep track of the datalen in the key. Finally, add a sanity check of the data in the downcall to make sure that it looks like a real IP address. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-23[CIFS] fix busy-file renames and refactor cifs_rename logicSteve French
Break out the code that does the actual renaming into a separate function and have cifs_rename call that. That function will attempt a path based rename first and then do a filehandle based one if it looks like the source is busy. The existing logic tried a path based rename first, but if we needed to remove the destination then it only attempted a filehandle based rename afterward. Not all servers support renaming by filehandle, so we need to always attempt path rename first and fall back to filehandle rename if it doesn't work. This also fixes renames of open files on windows servers (at least when the source and destination directories are the same). CC: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-23cifs: add function to set file dispositionJeff Layton
cifs: add function to set file disposition The proper way to set the delete on close bit on an already existing file is to use SET_FILE_INFO with an infolevel of SMB_FILE_DISPOSITION_INFO. Add a function to do that and have the silly-rename code use it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-23[CIFS] add constants for string lengths of keynames in SPNEGO upcall stringSteve French
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-09-23cifs: move rename and delete-on-close logic into helper functionJeff Layton
cifs: move rename and delete-on-close logic into helper function When a file is still open on the server, we attempt to set the DELETE_ON_CLOSE bit and rename it to a new filename. When the last opener closes the file, the server should delete it. This patch moves this mechanism into a helper function and has the two places in cifs_unlink that do this procedure call it. It also fixes the open flags to be correct. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>