aboutsummaryrefslogtreecommitdiff
path: root/fs/dlm/config.c
AgeCommit message (Collapse)Author
2008-08-13dlm: rename structsDavid Teigland
Add a dlm_ prefix to the struct names in config.c. This resolves a conflict with struct node in particular, when include/linux/node.h happens to be included. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Teigland <teigland@redhat.com>
2008-07-17configfs: Allow ->make_item() and ->make_group() to return detailed errors.Joel Becker
The configfs operations ->make_item() and ->make_group() currently return a new item/group. A return of NULL signifies an error. Because of this, -ENOMEM is the only return code bubbled up the stack. Multiple folks have requested the ability to return specific error codes when these operations fail. This patch adds that ability by changing the ->make_item/group() ops to return ERR_PTR() values. These errors are bubbled up appropriately. NULL returns are changed to -ENOMEM for compatibility. Also updated are the in-kernel users of configfs. This is a rework of reverted commit 11c3b79218390a139f2d474ee1e983a672d5839a. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-07-17Revert "configfs: Allow ->make_item() and ->make_group() to return detailed ↵Joel Becker
errors." This reverts commit 11c3b79218390a139f2d474ee1e983a672d5839a. The code will move to PTR_ERR(). Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-07-14configfs: Allow ->make_item() and ->make_group() to return detailed errors.Joel Becker
The configfs operations ->make_item() and ->make_group() currently return a new item/group. A return of NULL signifies an error. Because of this, -ENOMEM is the only return code bubbled up the stack. Multiple folks have requested the ability to return specific error codes when these operations fail. This patch adds that ability by changing the ->make_item/group() ops to return an int. Also updated are the in-kernel users of configfs. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-04-21dlm: recover nodes that are removed and re-addedDavid Teigland
If a node is removed from a lockspace, and then added back before the dlm is notified of the removal, the dlm will not detect the removal and won't clear the old state from the node. This is fixed by using a list of added nodes so the membership recovery can detect when a newly added node is already in the member list. Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21dlm: match signedness between dlm_config_info and cluster_setHarvey Harrison
cluster_set is only called from the macro CLUSTER_ATTR which defines read/write access functions. Make the signedness match to avoid sparse warnings every time CLUSTER_ATTR is used (lines 149-159) all of the form: fs/dlm/config.c:149:1: warning: incorrect type in argument 3 (different signedness) fs/dlm/config.c:149:1: expected unsigned int *info_field fs/dlm/config.c:149:1: got int extern [toplevel] *<noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-06dlm: add __init and __exit marks to init and exit functionsDenis Cheng
it moves 365 bytes from .text to .init.text, and 30 bytes from .text to .exit.text, saves memory. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2007-07-10configfs: Convert subsystem semaphore to mutexJoel Becker
Convert the su_sem member of struct configfs_subsystem to a struct mutex, as that's what it is. Also convert all the users and update Documentation/configfs.txt and Documentation/configfs_example.c accordingly. [ Conflict in fs/dlm/config.c with commit 3168b0780d06ace875696f8a648d04d6089654e5 manually resolved. --Mark ] Inspired-by: Satyam Sharma <ssatyam@cse.iitk.ac.in> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-07-10[PATCH] configfs+dlm: Rename config_group_find_obj and state semantics clearlySatyam Sharma
Configfs being based upon sysfs code, config_group_find_obj() is probably so named because of the similar kset_find_obj() in sysfs. However, "kobject"s in sysfs become "config_item"s in configfs, so let's call it config_group_find_item() instead, for sake of uniformity, and make corresponding change in the users of this function. BTW a crucial difference between kset_find_obj and config_group_find_item is in locking expectations. kset_find_obj does its locking by itself, but config_group_find_item expects the *caller* to do the locking. The reason for this: kset's have their own locks, config_group's don't but instead rely on the subsystem mutex. And, subsystem needn't necessarily be around when config_group_find_item() is called. So let's state these locking semantics explicitly, and rectify the comment, otherwise bugs could continue to occur in future, as they did in the past (refer commit d82b8191e238 in gfs2-2.6-fixes.git). [ I also took the opportunity to fix some bad whitespace and double-empty lines. --Joel ] [ Conflict in fs/dlm/config.c with commit 3168b0780d06ace875696f8a648d04d6089654e5 manually resolved. --Mark ] Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in> Cc: David Teigland <teigland@redhat.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-07-10[PATCH] configfs+dlm: Separate out __CONFIGFS_ATTR into configfs.hSatyam Sharma
fs/dlm/config.c contains a useful generic macro called __CONFIGFS_ATTR that is similar to sysfs' __ATTR macro that makes defining attributes easy for any user of configfs. Separate it out into configfs.h so that other users (forthcoming in dynamic netconsole patchset) can use it too. Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in> Cc: David Teigland <teigland@redhat.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-07-09[DLM] show default protocolDavid Teigland
Display the initial value of the "protocol" config value in configfs. The default value has always been 0 in the past anyway, so it's always appeared to be correct. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[DLM] timeout fixesDavid Teigland
Various fixes related to the new timeout feature: - add_timeout() missed setting TIMEWARN flag on lkb's when the TIMEOUT flag was already set - clear_proc_locks should remove a dead process's locks from the timeout list - the end-of-life calculation for user locks needs to consider that ETIMEDOUT is equivalent to -DLM_ECANCEL - make initial default timewarn_cs config value visible in configfs - change bit position of TIMEOUT_CANCEL flag so it's not copied to a remote master node - set timestamp on remote lkb's so a lock dump will display the time they've been waiting Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[DLM] add lock timeouts and warnings [2/6]David Teigland
New features: lock timeouts and time warnings. If the DLM_LKF_TIMEOUT flag is set, then the request/conversion will be canceled after waiting the specified number of centiseconds (specified per lock). This feature is only available for locks requested through libdlm (can be enabled for kernel dlm users if there's a use for it.) If the new DLM_LSFL_TIMEWARN flag is set when creating the lockspace, then a warning message will be sent to userspace (using genetlink) after a request/conversion has been waiting for a given number of centiseconds (configurable per node). The time warnings will be used in the future to do deadlock detection in userspace. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[DLM] fix a couple of racesSatyam Sharma
Fix two races in fs/dlm/config.c: (1) Grab the configfs subsystem semaphore before calling config_group_find_obj() in get_space(). This solves a potential race between get_space() and concurrent mkdir(2) or rmdir(2). (2) Grab a reference on the found config_item _while_ holding the configfs subsystem semaphore in get_comm(), and not after it. This solves a potential race between get_comm() and concurrent rmdir(2). Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01[DLM] Consolidate transport protocolsPatrick Caulfield
This patch consolidates the TCP & SCTP protocols for the DLM into a single file and makes it switchable at run-time (well, at least before the DLM actually starts up!) For RHEL5 this patch requires Neil Horman's patch that expands the in-kernel socket API but that has already been twice ACKed so it should be OK. The patch adds a new lowcomms.c file that replaces the existing lowcomms-sctp.c & lowcomms-tcp.c files. Signed-off-By: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05[DLM] expose dlm_config_info fields in configfsDavid Teigland
Make the dlm_config_info values readable and writeable via configfs entries. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05[DLM] add config entry to enable log_debugDavid Teigland
Add a new dlm_config_info field to enable log_debug output and change log_debug() to use it. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05[DLM] rename dlm_config_info fieldsDavid Teigland
Add a "ci_" prefix to the fields in the dlm_config_info struct so that we can use macros to add configfs functions to access them (in a later patch). No functional changes in this patch, just naming changes. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-28[DLM] PATCH 2/3 dlm: lowcomms closeDavid Teigland
When a node is removed from a lockspace configuration, close our connection to it, clearing any remaining messages for it. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-20[DLM] Update DLM to the latest patch levelDavid Teigland
Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
2006-01-18[DLM] The core of the DLM for GFS2/CLVMDavid Teigland
This is the core of the distributed lock manager which is required to use GFS2 as a cluster filesystem. It is also used by CLVM and can be used as a standalone lock manager independantly of either of these two projects. It implements VAX-style locking modes. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>