aboutsummaryrefslogtreecommitdiff
path: root/fs/ext4/ialloc.c
AgeCommit message (Collapse)Author
2008-07-11ext4: do not set extents feature from the kernelEric Sandeen
We've talked for a while about getting rid of any feature- setting from the kernel; this gets rid of the code which would set the INCOMPAT_EXTENTS flag on the first file write when mounted as ext4[dev]. With this patch, if the extents feature is not already set on disk, then mounting as ext4 will fall back to noextents with a warning, and if -o extents is explicitly requested, the mount will fail, also with warning. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11ext4: New inode allocation for FLEX_BG meta-data groups.Jose R. Santos
This patch mostly controls the way inode are allocated in order to make ialloc aware of flex_bg block group grouping. It achieves this by bypassing the Orlov allocator when block group meta-data are packed toghether through mke2fs. Since the impact on the block allocator is minimal, this patch should have little or no effect on other block allocation algorithms. By controlling the inode allocation, it can basically control where the initial search for new block begins and thus indirectly manipulate the block allocator. This allocator favors data and meta-data locality so the disk will gradually be filled from block group zero upward. This helps improve performance by reducing seek time. Since the group of inode tables within one flex_bg are treated as one giant inode table, uninitialized block groups would not need to partially initialize as many inode table as with Orlov which would help fsck time as the filesystem usage goes up. Signed-off-by: Jose R. Santos <jrs@us.ibm.com> Signed-off-by: Valerie Clement <valerie.clement@bull.net> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11ext4: Rename read_block_bitmap() to ext4_read_block_bitmap()Theodore Ts'o
Since this a non-static function, make it be ext4 specific to avoid conflicts with potentially other filesystems. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11ext4: handle corrupted orphan list at mountDuane Griffin
If the orphan node list includes valid, untruncatable nodes with nlink > 0 the ext4_orphan_cleanup loop which attempts to delete them will not do so, causing it to loop forever. Fix by checking for such nodes in the ext4_orphan_get function. This patch fixes the second case (image hdb.20000009.softlockup.gz) reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882. Signed-off-by: Duane Griffin <duaneg@dghda.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-04-29ext4: mark inode dirty after initializing the extent treeAneesh Kumar K.V
We should mark the inode dirty only after initializing the extent tree. Also if we fail during extent initialization we need to call DQUOT_FREE_INODE. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29ext4: move headers out of include/linuxChristoph Hellwig
Move ext4 headers out of include/linux. This is just the trivial move, there's some more thing that could be done later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17ext4: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17ext4: le*_add_cpu conversionMarcin Slusarz
replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-ext4@vger.kernel.org Cc: sct@redhat.com Cc: Andrew Morton <akpm@linux-foundation.org> Cc: adilger@clusterfs.com Cc: Mingming Cao <cmm@us.ibm.com>
2008-04-29ext4: Enable extent format for symlinks.Aneesh Kumar K.V
This patch enables extent-formatted normal symlinks. Using extents format allows a symlink to refer to a block number larger than 2^32 on large filesystems. We still don't enable extent format for fast symlinks, which are contained in the inode itself. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-21ext*: spelling fix prefered -> preferredBenoit Boissinot
Spelling fix: prefered -> preferred Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-02-25ext4: set EXT4_EXTENTS_FL only for directory and regular filesAneesh Kumar K.V
In addition, don't inherit EXT4_EXTENTS_FL from parent directory. If we have a directory with extent flag set and later mount the file system with -o noextents, the files created in that directory will also have extent flag set but we would not have called ext4_ext_tree_init for them. This will cause error later when we are verifying the extent header Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-07iget: stop EXT4 from using iget() and read_inode()David Howells
Stop the EXT4 filesystem from using iget() and read_inode(). Replace ext4_read_inode() with ext4_iget(), and call that instead of iget(). ext4_iget() then uses iget_locked() directly and returns a proper error code instead of an inode in the event of an error. ext4_fill_super() returns any error incurred when getting the root inode instead of EINVAL. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-28ext4: fix up EXT4FS_DEBUG buildsEric Sandeen
Builds with EXT4FS_DEBUG defined (to enable ext4_debug()) fail without these changes. Clean up some format warnings too. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28ext4: Rename i_dir_acl to i_size_highAneesh Kumar K.V
Rename ext4_inode.i_dir_acl to i_size_high drop ext4_inode_info.i_dir_acl as it is not used Rename ext4_inode.i_size to ext4_inode.i_size_lo Add helper function for accessing the ext4_inode combined i_size. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Introduce ext4_update_*_featureAneesh Kumar K.V
Introduce ext4_update_*_feature and use them instead of opencoding. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: fixes block group number being set to a negative valueAvantika Mathur
This patch fixes various places where the group number is set to a negative value. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: add ext4_group_t, and change all group variables to this type.Avantika Mathur
In many places variables for block group are of type int, which limits the maximum number of block groups to 2^31. Each block group can have up to 2^15 blocks, with a 4K block size, and the max filesystem size is limited to 2^31 * (2^15 * 2^12) = 2^58 -- or 256 PB This patch introduces a new type ext4_group_t, of type unsigned long, to represent block group numbers in ext4. All occurrences of block group variables are converted to type ext4_group_t. Signed-off-by: Avantika Mathur <mathur@us.ibm.com>
2007-10-17Ext4: Uninitialized Block GroupsAndreas Dilger
In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-17ext4: Remove (partial, never completed) fragment supportColy Li
Fragment support in ext2/3/4 was never implemented, and it probably will never be implemented. So remove it from ext4. Signed-off-by: Coly Li <coyli@suse.de> Acked-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-10-17remove unused bh in calls to ext234_get_group_descEric Sandeen
ext[234]_get_group_desc never tests the bh argument, and only sets it if it is passed in; it is perfectly happy with a NULL bh argument. But, many callers send one in and never use it. May as well call with NULL like other callers who don't use the bh. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18ext4: Add nanosecond timestampsKalpak Shah
This patch adds nanosecond timestamps for ext4. This involves adding *time_extra fields to the ext4_inode to extend the timestamps to 64-bits. Creation time is also added by this patch. These extended fields will fit into an inode if the filesystem was formatted with large inodes (-I 256 or larger) and there are currently no EAs consuming all of the available space. For new inodes we always reserve enough space for the kernel's known extended fields, but for inodes created with an old kernel this might not have been the case. So this patch also adds the EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature flag(ro-compat so that older kernels can't create inodes with a smaller extra_isize). which indicates if the fields fitting inside s_min_extra_isize are available or not. If the expansion of inodes if unsuccessful then this feature will be disabled. This feature is only enabled if requested by the sysadmin. None of the extended inode fields is critical for correct filesystem operation. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2006-10-11[PATCH] ext4 64 bit divide fixAndrew Morton
With CONFIG_LBD=n, sector_div() expands to a plain old divide. But ext4 is _not_ passing in a sector_t as the first argument, so... fs/built-in.o: In function `ext4_get_group_no_and_offset': fs/ext4/balloc.c:39: undefined reference to `__umoddi3' fs/ext4/balloc.c:41: undefined reference to `__udivdi3' fs/built-in.o: In function `find_group_orlov': fs/ext4/ialloc.c:278: undefined reference to `__udivdi3' fs/built-in.o: In function `ext4_fill_super': fs/ext4/super.c:1488: undefined reference to `__udivdi3' fs/ext4/super.c:1488: undefined reference to `__umoddi3' fs/ext4/super.c:1594: undefined reference to `__udivdi3' fs/ext4/super.c:1601: undefined reference to `__umoddi3' Fix that up by calling do_div() directly. Also cast the arg to u64. do_div() is only defined on u64, and ext4_fsblk_t is supposed to be opaque. Note especially the changes to find_group_orlov(). It was attempting to do do_div(int, unsigned long long); which is royally screwed up. Switched it to plain old divide. Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: move block number hi bitsAlexandre Ratchov
move '_hi' bits of block numbers in the larger part of the block group descriptor structure Signed-off-by: Alexandre Ratchov <alexandre.ratchov@bull.net> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: 64bit metadataLaurent Vivier
In-kernel super block changes to support >32 bit free blocks numbers. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Alexandre Ratchov <alexandre.ratchov@bull.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: switch fsblk to sector_tMingming Cao
Redefine ext3 in-kernel filesystem block type (ext3_fsblk_t) from unsigned long to sector_t, to allow kernel to handle >32 bit ext3 blocks. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext3: add extent map supportAlex Tomas
On disk extents format: /* * this is extent on-disk structure * it's used at the bottom of the tree */ struct ext3_extent { __le32 ee_block; /* first logical block extent covers */ __le16 ee_len; /* number of blocks covered by extent */ __le16 ee_start_hi; /* high 16 bits of physical block */ __le32 ee_start; /* low 32 bigs of physical block */ }; Signed-off-by: Alex Tomas <alex@clusterfs.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] jbd2: enable building of jbd2 and have ext4 use it rather than jbdMingming Cao
Reworked from a patch by Mingming Cao and Randy Dunlap Signed-off-By: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: rename ext4 symbols to avoid duplication of ext3 symbolsMingming Cao
Mingming Cao originally did this work, and Shaggy reproduced it using some scripts from her. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: initial copy of files from ext3Dave Kleikamp
Start of the ext4 patch series. See Documentation/filesystems/ext4.txt for details. This is a simple copy of the files in fs/ext3 to fs/ext4 and /usr/incude/linux/ext3* to /usr/include/ex4* Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>