| Age | Commit message (Collapse) | Author |
|---|
|
In the past, ext4_calc_metadata_amount(), and its sub-functions
ext4_ext_calc_metadata_amount() and ext4_indirect_calc_metadata_amount()
badly over-estimated the number of metadata blocks that might be
required for delayed allocation blocks. This didn't matter as much
when functions which managed the reserved metadata blocks were more
aggressive about dropping reserved metadata blocks as delayed
allocation blocks were written, but unfortunately they were too
aggressive. This was fixed in commit 0637c6f, but as a result the
over-estimation by ext4_calc_metadata_amount() would lead to reserving
2-3 times the number of pending delayed allocation blocks as
potentially required metadata blocks. So if there are 1 megabytes of
blocks which have been not yet been allocation, up to 3 megabytes of
space would get reserved out of the user's quota and from the file
system free space pool until all of the inode's data blocks have been
allocated.
This commit addresses this problem by much more accurately estimating
the number of metadata blocks that will be required. It will still
somewhat over-estimate the number of blocks needed, since it must make
a worst case estimate not knowing which physical blocks will be
needed, but it is much more accurate than before.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Commit 0637c6f had a typo which caused the reserved metadata blocks to
not be released correctly. Fix this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
As reported in Kernel Bugzilla #14936, commit d21cd8f triggered a BUG
in the function ext4_da_update_reserve_space() found in
fs/ext4/inode.c. The root cause of this BUG() was caused by the fact
that ext4_calc_metadata_amount() can severely over-estimate how many
metadata blocks will be needed, especially when using direct
block-mapped files.
In addition, it can also badly *under* estimate how much space is
needed, since ext4_calc_metadata_amount() assumes that the blocks are
contiguous, and this is not always true. If the application is
writing blocks to a sparse file, the number of metadata blocks
necessary can be severly underestimated by the functions
ext4_da_reserve_space(), ext4_da_update_reserve_space() and
ext4_da_release_space(). This was the cause of the dq_claim_space
reports found on kerneloops.org.
Unfortunately, doing this right means that we need to massively
over-estimate the amount of free space needed. So in some cases we
may need to force the inode to be written to disk asynchronously in
to avoid spurious quota failures.
http://bugzilla.kernel.org/show_bug.cgi?id=14936
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This fixes a bug (found by Curt Wohlgemuth) in which new blocks
returned from an extent created with ext4_ext_zeroout() can have dirty
metadata still associated with them.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
When ext4_da_writepages increases the nr_to_write in writeback_control
then it must always re-base the return value. Originally there was a
(misguided) attempt prevent wbc.nr_to_write from going negative. In
fact, it's necessary to allow nr_to_write to be negative so that
wb_writeback() can correctly calculate how many pages were actually
written.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Creating many small files in rapid succession on a small
filesystem can lead to spurious ENOSPC; on a 104MB filesystem:
for i in `seq 1 22500`; do
echo -n > $SCRATCH_MNT/$i
echo XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX > $SCRATCH_MNT/$i
done
leads to ENOSPC even though after a sync, 40% of the fs is free
again.
This is because we reserve worst-case metadata for delalloc writes,
and when data is allocated that worst-case reservation is not
usually needed.
When freespace is low, kicking off an async writeback will start
converting that worst-case space usage into something more realistic,
almost always freeing up space to continue.
This resolves the testcase for me, and survives all 4 generic
ENOSPC tests in xfstests.
We'll still need a hard synchronous sync to squeeze out the last bit,
but this fixes things up to a large degree.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
b_entry_name and buffer are initially NULL, are initialized within a loop
to the result of calling kmalloc, and are freed at the bottom of this loop.
The loop contains gotos to cleanup, which also frees b_entry_name and
buffer. Some of these gotos are before the reinitializations of
b_entry_name and buffer. To maintain the invariant that b_entry_name and
buffer are NULL at the top of the loop, and thus acceptable arguments to
kfree, these variables are now set to NULL after the kfrees.
This seems to be the simplest solution. A more complicated solution
would be to introduce more labels in the error handling code at the end of
the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r@
identifier E;
expression E1;
iterator I;
statement S;
@@
*kfree(E);
... when != E = E1
when != I(E,...) S
when != &E
*kfree(E);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
sparc64 allmodconfig:
fs/ext4/super.c: In function `lifetime_write_kbytes_show':
fs/ext4/super.c:2174: warning: long long unsigned int format, long unsigned int arg (arg 4)
fs/ext4/super.c:2174: warning: long long unsigned int format, long unsigned int arg (arg 4)
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This is a bit complicated because we are trying to optimize when we
send barriers to the fs data disk. We could just throw in an extra
barrier to the data disk whenever we send a barrier to the journal
disk, but that's not always strictly necessary.
We only need to send a barrier during a commit when there are data
blocks which are must be written out due to an inode written in
ordered mode, or if fsync() depends on the commit to force data blocks
to disk. Finally, before we drop transactions from the beginning of
the journal during a checkpoint operation, we need to guarantee that
any blocks that were flushed out to the data disk are firmly on the
rust platter before we drop the transaction from the journal.
Thanks to Oleg Drokin for pointing out this flaw in ext3/ext4.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This patch fixes the Kernel BZ #14286. When the address of an extent
corresponding to a valid block is corrupted, a -EIO should be reported
instead of a BUG(). This situation should not normally not occur
except in the case of a corrupted filesystem. If however it does,
then the system should not panic directly but depending on the mount
time options appropriate action should be taken. If the mount options
so permit, the I/O should be gracefully aborted by returning a -EIO.
http://bugzilla.kernel.org/show_bug.cgi?id=14286
Signed-off-by: Surbhi Palande <surbhi.palande@canonical.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Add module aliases for ext2 and ext3 when CONFIG_EXT4_USE_FOR_EXT23 is
set. This makes the existing user-space stuff like mkinitrd working
as is.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Don't offer to build ext2/3 support into ext4 if ext4 itself is not
configured on.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Remove unused #include <linux/version.h>('s) in
fs/ext4/block_validity.c
fs/ext4/mballoc.h
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Unlock i_block_reservation_lock before vfs_dq_reserve_block().
This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=14739
CC: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
We have to delay vfs_dq_claim_space() until allocation context destruction.
Currently we have following call-trace:
ext4_mb_new_blocks()
/* task is already holding ac->alloc_semp */
->ext4_mb_mark_diskspace_used
->vfs_dq_claim_space() /* acquire dqptr_sem here. Possible deadlock */
->ext4_mb_release_context() /* drop ac->alloc_semp here */
Let's move quota claiming to ext4_da_update_reserve_space()
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.32-rc7 #18
-------------------------------------------------------
write-truncate-/3465 is trying to acquire lock:
(&s->s_dquot.dqptr_sem){++++..}, at: [<c025e73b>] dquot_claim_space+0x3b/0x1b0
but task is already holding lock:
(&meta_group_info[i]->alloc_sem){++++..}, at: [<c02ce962>] ext4_mb_load_buddy+0xb2/0x370
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&meta_group_info[i]->alloc_sem){++++..}:
[<c017d04b>] __lock_acquire+0xd7b/0x1260
[<c017d5ea>] lock_acquire+0xba/0xd0
[<c0527191>] down_read+0x51/0x90
[<c02ce962>] ext4_mb_load_buddy+0xb2/0x370
[<c02d0c1c>] ext4_mb_free_blocks+0x46c/0x870
[<c029c9d3>] ext4_free_blocks+0x73/0x130
[<c02c8cfc>] ext4_ext_truncate+0x76c/0x8d0
[<c02a8087>] ext4_truncate+0x187/0x5e0
[<c01e0f7b>] vmtruncate+0x6b/0x70
[<c022ec02>] inode_setattr+0x62/0x190
[<c02a2d7a>] ext4_setattr+0x25a/0x370
[<c022ee81>] notify_change+0x151/0x340
[<c021349d>] do_truncate+0x6d/0xa0
[<c0221034>] may_open+0x1d4/0x200
[<c022412b>] do_filp_open+0x1eb/0x910
[<c021244d>] do_sys_open+0x6d/0x140
[<c021258e>] sys_open+0x2e/0x40
[<c0103100>] sysenter_do_call+0x12/0x32
-> #2 (&ei->i_data_sem){++++..}:
[<c017d04b>] __lock_acquire+0xd7b/0x1260
[<c017d5ea>] lock_acquire+0xba/0xd0
[<c0527191>] down_read+0x51/0x90
[<c02a5787>] ext4_get_blocks+0x47/0x450
[<c02a74c1>] ext4_getblk+0x61/0x1d0
[<c02a7a7f>] ext4_bread+0x1f/0xa0
[<c02bcddc>] ext4_quota_write+0x12c/0x310
[<c0262d23>] qtree_write_dquot+0x93/0x120
[<c0261708>] v2_write_dquot+0x28/0x30
[<c025d3fb>] dquot_commit+0xab/0xf0
[<c02be977>] ext4_write_dquot+0x77/0x90
[<c02be9bf>] ext4_mark_dquot_dirty+0x2f/0x50
[<c025e321>] dquot_alloc_inode+0x101/0x180
[<c029fec2>] ext4_new_inode+0x602/0xf00
[<c02ad789>] ext4_create+0x89/0x150
[<c0221ff2>] vfs_create+0xa2/0xc0
[<c02246e7>] do_filp_open+0x7a7/0x910
[<c021244d>] do_sys_open+0x6d/0x140
[<c021258e>] sys_open+0x2e/0x40
[<c0103100>] sysenter_do_call+0x12/0x32
-> #1 (&sb->s_type->i_mutex_key#7/4){+.+...}:
[<c017d04b>] __lock_acquire+0xd7b/0x1260
[<c017d5ea>] lock_acquire+0xba/0xd0
[<c0526505>] mutex_lock_nested+0x65/0x2d0
[<c0260c9d>] vfs_load_quota_inode+0x4bd/0x5a0
[<c02610af>] vfs_quota_on_path+0x5f/0x70
[<c02bc812>] ext4_quota_on+0x112/0x190
[<c026345a>] sys_quotactl+0x44a/0x8a0
[<c0103100>] sysenter_do_call+0x12/0x32
-> #0 (&s->s_dquot.dqptr_sem){++++..}:
[<c017d361>] __lock_acquire+0x1091/0x1260
[<c017d5ea>] lock_acquire+0xba/0xd0
[<c0527191>] down_read+0x51/0x90
[<c025e73b>] dquot_claim_space+0x3b/0x1b0
[<c02cb95f>] ext4_mb_mark_diskspace_used+0x36f/0x380
[<c02d210a>] ext4_mb_new_blocks+0x34a/0x530
[<c02c83fb>] ext4_ext_get_blocks+0x122b/0x13c0
[<c02a5966>] ext4_get_blocks+0x226/0x450
[<c02a5ff3>] mpage_da_map_blocks+0xc3/0xaa0
[<c02a6ed6>] ext4_da_writepages+0x506/0x790
[<c01de272>] do_writepages+0x22/0x50
[<c01d766d>] __filemap_fdatawrite_range+0x6d/0x80
[<c01d7b9b>] filemap_flush+0x2b/0x30
[<c02a40ac>] ext4_alloc_da_blocks+0x5c/0x60
[<c029e595>] ext4_release_file+0x75/0xb0
[<c0216b59>] __fput+0xf9/0x210
[<c0216c97>] fput+0x27/0x30
[<c02122dc>] filp_close+0x4c/0x80
[<c014510e>] put_files_struct+0x6e/0xd0
[<c01451b7>] exit_files+0x47/0x60
[<c0146a24>] do_exit+0x144/0x710
[<c0147028>] do_group_exit+0x38/0xa0
[<c0159abc>] get_signal_to_deliver+0x2ac/0x410
[<c0102849>] do_notify_resume+0xb9/0x890
[<c01032d2>] work_notifysig+0x13/0x21
other info that might help us debug this:
3 locks held by write-truncate-/3465:
#0: (jbd2_handle){+.+...}, at: [<c02e1f8f>] start_this_handle+0x38f/0x5c0
#1: (&ei->i_data_sem){++++..}, at: [<c02a57f6>] ext4_get_blocks+0xb6/0x450
#2: (&meta_group_info[i]->alloc_sem){++++..}, at: [<c02ce962>] ext4_mb_load_buddy+0xb2/0x370
stack backtrace:
Pid: 3465, comm: write-truncate- Not tainted 2.6.32-rc7 #18
Call Trace:
[<c0524cb3>] ? printk+0x1d/0x22
[<c017ac9a>] print_circular_bug+0xca/0xd0
[<c017d361>] __lock_acquire+0x1091/0x1260
[<c016bca2>] ? sched_clock_local+0xd2/0x170
[<c0178fd0>] ? trace_hardirqs_off_caller+0x20/0xd0
[<c017d5ea>] lock_acquire+0xba/0xd0
[<c025e73b>] ? dquot_claim_space+0x3b/0x1b0
[<c0527191>] down_read+0x51/0x90
[<c025e73b>] ? dquot_claim_space+0x3b/0x1b0
[<c025e73b>] dquot_claim_space+0x3b/0x1b0
[<c02cb95f>] ext4_mb_mark_diskspace_used+0x36f/0x380
[<c02d210a>] ext4_mb_new_blocks+0x34a/0x530
[<c02c601d>] ? ext4_ext_find_extent+0x25d/0x280
[<c02c83fb>] ext4_ext_get_blocks+0x122b/0x13c0
[<c016bca2>] ? sched_clock_local+0xd2/0x170
[<c016be60>] ? sched_clock_cpu+0x120/0x160
[<c016beef>] ? cpu_clock+0x4f/0x60
[<c0178fd0>] ? trace_hardirqs_off_caller+0x20/0xd0
[<c052712c>] ? down_write+0x8c/0xa0
[<c02a5966>] ext4_get_blocks+0x226/0x450
[<c016be60>] ? sched_clock_cpu+0x120/0x160
[<c016beef>] ? cpu_clock+0x4f/0x60
[<c017908b>] ? trace_hardirqs_off+0xb/0x10
[<c02a5ff3>] mpage_da_map_blocks+0xc3/0xaa0
[<c01d69cc>] ? find_get_pages_tag+0x16c/0x180
[<c01d6860>] ? find_get_pages_tag+0x0/0x180
[<c02a73bd>] ? __mpage_da_writepage+0x16d/0x1a0
[<c01dfc4e>] ? pagevec_lookup_tag+0x2e/0x40
[<c01ddf1b>] ? write_cache_pages+0xdb/0x3d0
[<c02a7250>] ? __mpage_da_writepage+0x0/0x1a0
[<c02a6ed6>] ext4_da_writepages+0x506/0x790
[<c016beef>] ? cpu_clock+0x4f/0x60
[<c016bca2>] ? sched_clock_local+0xd2/0x170
[<c016be60>] ? sched_clock_cpu+0x120/0x160
[<c016be60>] ? sched_clock_cpu+0x120/0x160
[<c02a69d0>] ? ext4_da_writepages+0x0/0x790
[<c01de272>] do_writepages+0x22/0x50
[<c01d766d>] __filemap_fdatawrite_range+0x6d/0x80
[<c01d7b9b>] filemap_flush+0x2b/0x30
[<c02a40ac>] ext4_alloc_da_blocks+0x5c/0x60
[<c029e595>] ext4_release_file+0x75/0xb0
[<c0216b59>] __fput+0xf9/0x210
[<c0216c97>] fput+0x27/0x30
[<c02122dc>] filp_close+0x4c/0x80
[<c014510e>] put_files_struct+0x6e/0xd0
[<c01451b7>] exit_files+0x47/0x60
[<c0146a24>] do_exit+0x144/0x710
[<c017b163>] ? lock_release_holdtime+0x33/0x210
[<c0528137>] ? _spin_unlock_irq+0x27/0x30
[<c0147028>] do_group_exit+0x38/0xa0
[<c017babb>] ? trace_hardirqs_on+0xb/0x10
[<c0159abc>] get_signal_to_deliver+0x2ac/0x410
[<c0102849>] do_notify_resume+0xb9/0x890
[<c0178fd0>] ? trace_hardirqs_off_caller+0x20/0xd0
[<c017b163>] ? lock_release_holdtime+0x33/0x210
[<c0165b50>] ? autoremove_wake_function+0x0/0x50
[<c017ba54>] ? trace_hardirqs_on_caller+0x134/0x190
[<c017babb>] ? trace_hardirqs_on+0xb/0x10
[<c0300ba4>] ? security_file_permission+0x14/0x20
[<c0215761>] ? vfs_write+0x131/0x190
[<c0214f50>] ? do_sync_write+0x0/0x120
[<c0103115>] ? sysenter_do_call+0x27/0x32
[<c01032d2>] work_notifysig+0x13/0x21
CC: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
This patch also fixes write vs chown race condition.
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
This reverts commit e4c570c4cb7a95dbfafa3d016d2739bf3fdfe319, as
requested by Alexey:
"I think I gave a good enough arguments to not merge it.
To iterate:
* patch makes impossible to start using ext3 on EXT3_FS=n kernels
without reboot.
* this is done only for one pointer on task_struct"
None of config options which define task_struct are tristate directly
or effectively."
Requested-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a flags argument to struct xattr_handler and pass it to all xattr
handler methods. This allows using the same methods for multiple
handlers, e.g. for the ACL methods which perform exactly the same action
for the access and default ACLs, just using a different underlying
attribute. With a little more groundwork it'll also allow sharing the
methods for the regular user/trusted/secure handlers in extN, ocfs2 and
jffs2 like it's already done for xfs in this patch.
Also change the inode argument to the handlers to a dentry to allow
using the handlers mechnism for filesystems that require it later,
e.g. cifs.
[with GFS2 bits updated by Steven Whitehouse <swhiteho@redhat.com>]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Makes use of skip_spaces() defined in lib/string.c for removing leading
spaces from strings all over the tree.
It decreases lib.a code size by 47 bytes and reuses the function tree-wide:
text data bss dec hex filename
64688 584 592 65864 10148 (TOTALS-BEFORE)
64641 584 592 65817 10119 (TOTALS-AFTER)
Also, while at it, if we see (*str && isspace(*str)), we can be sure to
remove the first condition (*str) as the second one (isspace(*str)) also
evaluates to 0 whenever *str == 0, making it redundant. In other words,
"a char equals zero is never a space".
Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below,
and found occurrences of this pattern on 3 more files:
drivers/leds/led-class.c
drivers/leds/ledtrig-timer.c
drivers/video/output.c
@@
expression str;
@@
( // ignore skip_spaces cases
while (*str && isspace(*str)) { \(str++;\|++str;\) }
|
- *str &&
isspace(*str)
)
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Julia Lawall <julia@diku.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
journal_info in task_struct is used in journaling file system only. So
introduce CONFIG_FS_JOURNAL_INFO and make it conditional.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
m68k: rename global variable vmalloc_end to m68k_vmalloc_end
percpu: add missing per_cpu_ptr_to_phys() definition for UP
percpu: Fix kdump failure if booted with percpu_alloc=page
percpu: make misc percpu symbols unique
percpu: make percpu symbols in ia64 unique
percpu: make percpu symbols in powerpc unique
percpu: make percpu symbols in x86 unique
percpu: make percpu symbols in xen unique
percpu: make percpu symbols in cpufreq unique
percpu: make percpu symbols in oprofile unique
percpu: make percpu symbols in tracer unique
percpu: make percpu symbols under kernel/ and mm/ unique
percpu: remove some sparse warnings
percpu: make alloc_percpu() handle array types
vmalloc: fix use of non-existent percpu variable in put_cpu_var()
this_cpu: Use this_cpu_xx in trace_functions_graph.c
this_cpu: Use this_cpu_xx for ftrace
this_cpu: Use this_cpu_xx in nmi handling
this_cpu: Use this_cpu operations in RCU
this_cpu: Use this_cpu ops for VM statistics
...
Fix up trivial (famous last words) global per-cpu naming conflicts in
arch/x86/kvm/svm.c
mm/slab.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (21 commits)
ext3: PTR_ERR return of wrong pointer in setup_new_group_blocks()
ext3: Fix data / filesystem corruption when write fails to copy data
ext4: Support for 64-bit quota format
ext3: Support for vfsv1 quota format
quota: Implement quota format with 64-bit space and inode limits
quota: Move definition of QFMT_OCFS2 to linux/quota.h
ext2: fix comment in ext2_find_entry about return values
ext3: Unify log messages in ext3
ext2: clear uptodate flag on super block I/O error
ext2: Unify log messages in ext2
ext3: make "norecovery" an alias for "noload"
ext3: Don't update the superblock in ext3_statfs()
ext3: journal all modifications in ext3_xattr_set_handle
ext2: Explicitly assign values to on-disk enum of filetypes
quota: Fix WARN_ON in lookup_one_len
const: struct quota_format_ops
ubifs: remove manual O_SYNC handling
afs: remove manual O_SYNC handling
kill wait_on_page_writeback_range
vfs: Implement proper O_SYNC semantics
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (47 commits)
ext4: Fix potential fiemap deadlock (mmap_sem vs. i_data_sem)
ext4: Do not override ext2 or ext3 if built they are built as modules
jbd2: Export jbd2_log_start_commit to fix ext4 build
ext4: Fix insufficient checks in EXT4_IOC_MOVE_EXT
ext4: Wait for proper transaction commit on fsync
ext4: fix incorrect block reservation on quota transfer.
ext4: quota macros cleanup
ext4: ext4_get_reserved_space() must return bytes instead of blocks
ext4: remove blocks from inode prealloc list on failure
ext4: wait for log to commit when umounting
ext4: Avoid data / filesystem corruption when write fails to copy data
ext4: Use ext4 file system driver for ext2/ext3 file system mounts
ext4: Return the PTR_ERR of the correct pointer in setup_new_group_blocks()
jbd2: Add ENOMEM checking in and for jbd2_journal_write_metadata_buffer()
ext4: remove unused parameter wbc from __ext4_journalled_writepage()
ext4: remove encountered_congestion trace
ext4: move_extent_per_page() cleanup
ext4: initialize moved_len before calling ext4_move_extents()
ext4: Fix double-free of blocks with EXT4_IOC_MOVE_EXT
ext4: use ext4_data_block_valid() in ext4_free_blocks()
...
|
|
Add support for new 64-bit quota format. It is enough to add proper
mount options handling. The rest is done by the generic code.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Fix the following potential circular locking dependency between
mm->mmap_sem and ei->i_data_sem:
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.32-04115-gec044c5 #37
-------------------------------------------------------
ureadahead/1855 is trying to acquire lock:
(&mm->mmap_sem){++++++}, at: [<ffffffff81107224>] might_fault+0x5c/0xac
but task is already holding lock:
(&ei->i_data_sem){++++..}, at: [<ffffffff811be1fd>] ext4_fiemap+0x11b/0x159
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&ei->i_data_sem){++++..}:
[<ffffffff81099bfa>] __lock_acquire+0xb67/0xd0f
[<ffffffff81099e7e>] lock_acquire+0xdc/0x102
[<ffffffff81516633>] down_read+0x51/0x84
[<ffffffff811a2414>] ext4_get_blocks+0x50/0x2a5
[<ffffffff811a3453>] ext4_get_block+0xab/0xef
[<ffffffff81154f39>] do_mpage_readpage+0x198/0x48d
[<ffffffff81155360>] mpage_readpages+0xd0/0x114
[<ffffffff811a104b>] ext4_readpages+0x1d/0x1f
[<ffffffff810f8644>] __do_page_cache_readahead+0x12f/0x1bc
[<ffffffff810f86f2>] ra_submit+0x21/0x25
[<ffffffff810f0cfd>] filemap_fault+0x19f/0x32c
[<ffffffff81107b97>] __do_fault+0x55/0x3a2
[<ffffffff81109db0>] handle_mm_fault+0x327/0x734
[<ffffffff8151aaa9>] do_page_fault+0x292/0x2aa
[<ffffffff81518205>] page_fault+0x25/0x30
[<ffffffff812a34d8>] clear_user+0x38/0x3c
[<ffffffff81167e16>] padzero+0x20/0x31
[<ffffffff81168b47>] load_elf_binary+0x8bc/0x17ed
[<ffffffff81130e95>] search_binary_handler+0xc2/0x259
[<ffffffff81166d64>] load_script+0x1b8/0x1cc
[<ffffffff81130e95>] search_binary_handler+0xc2/0x259
[<ffffffff8113255f>] do_execve+0x1ce/0x2cf
[<ffffffff81027494>] sys_execve+0x43/0x5a
[<ffffffff8102918a>] stub_execve+0x6a/0xc0
-> #0 (&mm->mmap_sem){++++++}:
[<ffffffff81099aa4>] __lock_acquire+0xa11/0xd0f
[<ffffffff81099e7e>] lock_acquire+0xdc/0x102
[<ffffffff81107251>] might_fault+0x89/0xac
[<ffffffff81139382>] fiemap_fill_next_extent+0x95/0xda
[<ffffffff811bcb43>] ext4_ext_fiemap_cb+0x138/0x157
[<ffffffff811be069>] ext4_ext_walk_space+0x178/0x1f1
[<ffffffff811be21e>] ext4_fiemap+0x13c/0x159
[<ffffffff811390e6>] do_vfs_ioctl+0x348/0x4d6
[<ffffffff811392ca>] sys_ioctl+0x56/0x79
[<ffffffff81028cb2>] system_call_fastpath+0x16/0x1b
other info that might help us debug this:
1 lock held by ureadahead/1855:
#0: (&ei->i_data_sem){++++..}, at: [<ffffffff811be1fd>] ext4_fiemap+0x11b/0x159
stack backtrace:
Pid: 1855, comm: ureadahead Not tainted 2.6.32-04115-gec044c5 #37
Call Trace:
[<ffffffff81098c70>] print_circular_bug+0xa8/0xb7
[<ffffffff81099aa4>] __lock_acquire+0xa11/0xd0f
[<ffffffff8102f229>] ? sched_clock+0x9/0xd
[<ffffffff81099e7e>] lock_acquire+0xdc/0x102
[<ffffffff81107224>] ? might_fault+0x5c/0xac
[<ffffffff81107251>] might_fault+0x89/0xac
[<ffffffff81107224>] ? might_fault+0x5c/0xac
[<ffffffff81124b44>] ? __kmalloc+0x13b/0x18c
[<ffffffff81139382>] fiemap_fill_next_extent+0x95/0xda
[<ffffffff811bcb43>] ext4_ext_fiemap_cb+0x138/0x157
[<ffffffff811bca0b>] ? ext4_ext_fiemap_cb+0x0/0x157
[<ffffffff811be069>] ext4_ext_walk_space+0x178/0x1f1
[<ffffffff811be21e>] ext4_fiemap+0x13c/0x159
[<ffffffff81107224>] ? might_fault+0x5c/0xac
[<ffffffff811390e6>] do_vfs_ioctl+0x348/0x4d6
[<ffffffff8129f6d0>] ? __up_read+0x8d/0x95
[<ffffffff81517fb5>] ? retint_swapgs+0x13/0x1b
[<ffffffff811392ca>] sys_ioctl+0x56/0x79
[<ffffffff81028cb2>] system_call_fastpath+0x16/0x1b
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The CONFIG_EXT4_USE_FOR_EXT23 option must not try to take over the
ext2 or ext3 file systems if the those file system drivers are
configured to be built as mdoules.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Conflicts:
kernel/irq/chip.c
|
|
This patch fixes three problems in the handling of the
EXT4_IOC_MOVE_EXT ioctl:
1. In current EXT4_IOC_MOVE_EXT, there are read access mode checks for
original and donor files, but they allow the illegal write access to
donor file, since donor file is overwritten by original file data. To
fix this problem, change access mode checks of original (r->r/w) and
donor (r->w) files.
2. Disallow the use of donor files that have a setuid or setgid bits.
3. Call mnt_want_write() and mnt_drop_write() before and after
ext4_move_extents() calling to get write access to a mount.
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
We cannot rely on buffer dirty bits during fsync because pdflush can come
before fsync is called and clear dirty bits without forcing a transaction
commit. What we do is that we track which transaction has last changed
the inode and which transaction last changed allocation and force it to
disk on fsync.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Inside ->setattr() call both ATTR_UID and ATTR_GID may be valid
This means that we may end-up with transferring all quotas. Add
we have to reserve QUOTA_DEL_BLOCKS for all quotas, as we do in
case of QUOTA_INIT_BLOCKS.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Currently all quota block reservation macros contains hard-coded "2"
aka MAXQUOTAS value. This is no good because in some places it is not
obvious to understand what does this digit represent. Let's introduce
new macro with self descriptive name.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Acked-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This fixes a leak of blocks in an inode prealloc list if device failures
cause ext4_mb_mark_diskspace_used() to fail.
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
There is a potential race when a transaction is committing right when
the file system is being umounting. This could reduce in a race
because EXT4_SB(sb)->s_group_info could be freed in ext4_put_super
before the commit code calls a callback so the mballoc code can
release freed blocks in the transaction, resulting in a panic trying
to access the freed s_group_info.
The fix is to wait for the transaction to finish committing before we
shutdown the multiblock allocator.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
When ext4_write_begin fails after allocating some blocks or
generic_perform_write fails to copy data to write, we truncate blocks
already instantiated beyond i_size. Although these blocks were never
inside i_size, we have to truncate the pagecache of these blocks so
that corresponding buffers get unmapped. Otherwise subsequent
__block_prepare_write (called because we are retrying the write) will
find the buffers mapped, not call ->get_block, and thus the page will
be backed by already freed blocks leading to filesystem and data
corruption.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Add a new config option, CONFIG_EXT4_USE_FOR_EXT23 which if enabled,
will cause ext4 to be used for either ext2 or ext3 file system mounts
when ext2 or ext3 is not enabled in the configuration.
This allows minimalist kernel fanatics to drop to file system drivers
from their compiled kernel with out losing functionality.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch was generated by
git grep -E -i -l 'offest' | xargs -r perl -p -i -e 's/offest/offset/'
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
CC: Jan Kara <jack@suse.cz>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Integrate duplicate lines (acquire/release semaphore and invalidate
extent cache in move_extent_per_page()) into mext_replace_branches(),
to reduce source and object code size.
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The move_extent.moved_len is used to pass back the number of exchanged
blocks count to user space. Currently the caller must clear this
field; but we spend more code space checking for this requirement than
simply zeroing the field ourselves, so let's just make life easier for
everyone all around.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
At the beginning of ext4_move_extent(), we call
ext4_discard_preallocations() to discard inode PAs of orig and donor
inodes. But in the following case, blocks can be double freed, so
move ext4_discard_preallocations() to the end of ext4_move_extents().
1. Discard inode PAs of orig and donor inodes with
ext4_discard_preallocations() in ext4_move_extents().
orig : [ DATA1 ]
donor: [ DATA2 ]
2. While data blocks are exchanging between orig and donor inodes, new
inode PAs is created to orig by other process's block allocation.
(Since there are semaphore gaps in ext4_move_extents().) And new
inode PAs is used partially (2-1).
2-1 Create new inode PAs to orig inode
orig : [ DATA1 | used PA1 | free PA1 ]
donor: [ DATA2 ]
3. Donor inode which has old orig inode's blocks is deleted after
EXT4_IOC_MOVE_EXT finished (3-1, 3-2). So the block bitmap
corresponds to old orig inode's blocks are freed.
3-1 After EXT4_IOC_MOVE_EXT finished
orig : [ DATA2 | free PA1 ]
donor: [ DATA1 | used PA1 ]
3-2 Delete donor inode
orig : [ DATA2 | free PA1 ]
donor: [ FREE SPACE(DATA1) | FREE SPACE(used PA1) ]
4. The double-free of blocks is occurred, when close() is called to
orig inode. Because ext4_discard_preallocations() for orig inode
frees used PA1 and free PA1, though used PA1 is already freed in 3.
4-1 Double-free of blocks is occurred
orig : [ DATA2 | FREE SPACE(free PA1) ]
donor: [ FREE SPACE(DATA1) | DOUBLE FREE(used PA1) ]
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The block validity framework does a more comprehensive set of checks,
and it saves object code space to use the ext4_data_block_valid() than
the limited open-coded version that had been in ext4_free_blocks().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Add the facility for ext4_forget() to be called from
ext4_free_blocks(). This simplifies the code in a large number of
places, and centralizes most of the work of calling ext4_forget() into
a single place.
Also fix a bug in the extents migration code; it wasn't calling
ext4_forget() when releasing the indirect blocks during the
conversion. As a result, if the system cashed during or shortly after
the extents migration, and the released indirect blocks get reused as
data blocks, the journal replay would corrupt the data blocks. With
this new patch, fixing this bug was as simple as adding the
EXT4_FREE_BLOCKS_FORGET flags to the call to ext4_free_blocks().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
|
|
ext4_mb_free_blocks() is only called by ext4_free_blocks(), and the
latter function doesn't really do much. So merge the two functions
together, such that ext4_free_blocks() is now found in
fs/ext4/mballoc.c. This saves about 200 bytes of compiled text space.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Convert the last two callers of ext4_journal_forget() to use
ext4_forget() instead, and then fold ext4_journal_forget() into
ext4_forget(). This reduces are code complexity and shortens our call
stack.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The only caller of ext4_journal_revoke() is ext4_forget(), so we can
fold ext4_journal_revoke() into ext4_forget() to simplify the code and
shorten the call stack.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The ext4_forget() function better belongs in ext4_jbd2.c. This will
allow us to do some cleanup of the ext4_journal_revoke() and
ext4_journal_forget() functions, as well as giving us better error
reporting since we can report the caller of ext4_forget() when things
go wrong.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
