aboutsummaryrefslogtreecommitdiff
path: root/fs/ext4
AgeCommit message (Collapse)Author
2008-02-10ext4: Add new "development flag" to the ext4 filesystemTheodore Tso
This flag is simply a generic "this is a crash/burn test filesystem" marker. If it is set, then filesystem code which is "in development" will be allowed to mount the filesystem. Filesystem code which is not considered ready for prime-time will check for this flag, and if it is not set, it will refuse to touch the filesystem. As we start rolling ext4 out to distro's like Fedora, et. al, this makes it less likely that a user might accidentally start using ext4 on a production filesystem; a bad thing, since that will essentially make it be unfsckable until e2fsprogs catches up. Signed-off-by: Theodore Tso <tytso@MIT.EDU> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-02-10ext4: Don't panic in case of corrupt bitmapAneesh Kumar K.V
Multiblock allocator calls BUG_ON in many case if the free and used blocks count obtained looking at the bitmap is different from what the allocator internally accounted for. Use ext4_error in such case and don't panic the system. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-10ext4: allocate struct ext4_allocation_context from a kmem cacheEric Sandeen
struct ext4_allocation_context is rather large, and this bloats the stack of many functions which use it. Allocating it from a named slab cache will alleviate this. For example, with this change (on top of the noinline patch sent earlier): -ext4_mb_new_blocks 200 +ext4_mb_new_blocks 40 -ext4_mb_free_blocks 344 +ext4_mb_free_blocks 168 -ext4_mb_release_inode_pa 216 +ext4_mb_release_inode_pa 40 -ext4_mb_release_group_pa 192 +ext4_mb_release_group_pa 24 Most of these stack-allocated structs are actually used only for mballoc history; and in those cases often a smaller struct would do. So changing that may be another way around it, at least for those functions, if preferred. For now, in those cases where the ac is only for history, an allocation failure simply skips the history recording, and does not cause any other failures. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-10ext4: Fix Direct I/O lockingJan Kara
We cannot start transaction in ext4_direct_IO() and just let it last during the whole write because dio_get_page() acquires mmap_sem which ranks above transaction start (e.g. because we have dependency chain mmap_sem->PageLock->journal_start, or because we update atime while holding mmap_sem) and thus deadlocks could happen. We solve the problem by starting a transaction separately for each ext4_get_block() call. We *could* have a problem that we allocate a block and before its data are written out the machine crashes and thus we expose stale data. But that does not happen because for hole-filling generic code falls back to buffered writes and for file extension, we add inode to orphan list and thus in case of crash, journal replay will truncate inode back to the original size. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-10ext4: Fix circular locking dependency with migrate and rm.Aneesh Kumar K.V
In order to prevent a circular locking dependency when an unlink operation is racing with an ext4 migration, we delay taking i_data_sem until just before switch the inode format, and use i_mutex to prevent writes and truncates during the first part of the migration operation. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-05allow in-inode EAs on ext4 root inodeEric Sandeen
The ext3 root inode was treated specially with respect to in-inode extended attributes, for reasons detailed in the removed comment below. The first mkfs-created inodes would not get extra_i_size or the EXT3_STATE_XATTR flag set in ext3_read_inode, which disallowed reading or setting in-inode EAs on the root. However, in ext4, ext4_mark_inode_dirty calls ext4_expand_extra_isize for all inodes; once this is done EAs may be placed in the root ext4 inode body. But for reasons above, it won't be found after a reboot. testcase: setfattr -n user.name -v value mntpt/ setfattr -n user.name2 -v value2 mntpt/ umount mntpt/; remount mntpt/ getfattr -d mntpt/ name2/value2 has gone missing; debugfs shows it in the inode body, but it is not found there by getattr. The following fixes it up; newer mkfs appears to properly zero the inodes, so this workaround isn't needed for ext4. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-02-10ext4: Fix null bh pointer dereference in mballocAneesh Kumar K.V
Repoted by Adrian Bunk <bunk@kernel.org>: The Coverity checker spotted the following NULL dereference: static int ext4_mb_mark_diskspace_used { ... if (!bitmap_bh) goto out_err; ... out_err: sb->s_dirt = 1; put_bh(bitmap_bh); ... Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-02-05ext4: Don't set EXTENTS_FL flag for fast symlinksValerie Clement
For fast symbolic links, the file content is stored in the i_block[] array, which is not compatible with the new file extents format. e2fsck reports error on such files because EXTENTS_FL is set. Don't set the EXTENTS_FL flag when creating fast symlinks. In the case of file migration, skip fast symbolic links. Signed-off-by: Valerie Clement <valerie.clement@bull.net> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-07iget: stop EXT4 from using iget() and read_inode()David Howells
Stop the EXT4 filesystem from using iget() and read_inode(). Replace ext4_read_inode() with ext4_iget(), and call that instead of iget(). ext4_iget() then uses iget_locked() directly and returns a proper error code instead of an inode in the event of an error. ext4_fill_super() returns any error incurred when getting the root inode instead of EINVAL. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext[234]: cleanup ext[234]_bg_num_gdb()Akinobu Mita
Use ext[234]_bg_has_super() to remove duplicate code. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext[234]: remove unused argument for ext[234]_find_goal()Akinobu Mita
The argument chain for ext[234]_find_goal() is not used. This patch removes it and fixes comment as well. Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext[234]: use ext[234]_get_group_desc()Akinobu Mita
Use ext[234]_get_group_desc() to get group descriptor from group number. Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext[234]: fix comment for nonexistent variableAkinobu Mita
The comment in ext[234]_new_blocks() describes about "i". But there is no local variable called "i" in that scope. I guess it has been renamed to group_no. Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05Pagecache zeroing: zero_user_segment, zero_user_segments and zero_userChristoph Lameter
Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-28ext4: Use the ext4_ext_actual_len() helper functionAneesh Kumar K.V
ext4 uses the high bit of the extent length to encode whether the extent is intialized or not. The helper function ext4_ext_get_actual_len should be used to get the actual length of the extent. This addresses the kernel bug documented here: http://bugzilla.kernel.org/show_bug.cgi?id=9732 kernel BUG at fs/ext4/extents.c:1056! .... Call Trace: [<ffffffff88366073>] :ext4dev:ext4_ext_get_blocks+0x5ba/0x8c1 [<ffffffff81053c91>] lock_release_holdtime+0x27/0x49 [<ffffffff812748f6>] _spin_unlock+0x17/0x20 [<ffffffff883400a6>] :jbd2:start_this_handle+0x4e0/0x4fe [<ffffffff88366564>] :ext4dev:ext4_fallocate+0x175/0x39a [<ffffffff81053c91>] lock_release_holdtime+0x27/0x49 [<ffffffff81056480>] __lock_acquire+0x4e7/0xc4d [<ffffffff81053c91>] lock_release_holdtime+0x27/0x49 [<ffffffff810a8de7>] sys_fallocate+0xe4/0x10d [<ffffffff8100c043>] tracesys+0xd5/0xda Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: fix uniniatilized extent splitting errorDmitry Monakhov
Fix bug reported by Dmitry Monakhov caused by lost error code Testcase: blksize = 0x1000; fd = open(argv[1], O_RDWR|O_CREAT, 0700); unsigned long long sz = 0x10000000UL; /* allocating big blocks chunk */ syscall(__NR_fallocate, fd, 0, 0UL, sz) /* grab all other available filesystem space */ tfd = open("tmp", O_RDWR|O_CREAT|O_DIRECT, 0700); while( write(tfd, buf, 4096) > 0); /* loop untill ENOSPC */ fsync(fd); /* just in case */ while (pos < sz) { /* each seek+ write operation result in splits uninitialized extent in three extents. Splitting may result in new extent allocation which probably will fail because of ENOSPC*/ lseek(fd, blksize*2 -1, SEEK_CUR); if ((ret = write(fd, 'a', 1)) != 1) exit(1); pos += blksize * 2; } Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: Check for return value from sb_set_blocksizeAneesh Kumar K.V
sb_set_blocksize validates whether the specfied block size can be used by the file system. Make sure we fail mounting the file system if the blocksize specfied cannot be used. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28ext4: Add stripe= option to /proc/mountsMiklos Szeredi
Add stripe= option to /proc/mounts for ext4 filesystems. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28ext4: Enable the multiblock allocator by defaultAneesh Kumar K.V
Enable the multiblock allocator by default. Fix ext4_show_options() so if it is not enabled, the nomballoc option included in /proc/mounts. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-29ext4: Add multi block allocator for ext4Alex Tomas
Signed-off-by: Alex Tomas <alex@clusterfs.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: Add new functions for searching extent treeAlex Tomas
Add the functions ext4_ext_search_left() and ext4_ext_search_right(), which are used by mballoc during ext4_ext_get_blocks to decided whether to merge extent information. Signed-off-by: Alex Tomas <alex@clusterfs.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Johann Lombardi <johann@clusterfs.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: fix up EXT4FS_DEBUG buildsEric Sandeen
Builds with EXT4FS_DEBUG defined (to enable ext4_debug()) fail without these changes. Clean up some format warnings too. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28ext4: Fix ext4_show_options to show the correct mount options.Aneesh Kumar K.V
We need to look at the default value and make sure the mount options are not set via default value before showing them via ext4_show_options Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Add EXT4_IOC_MIGRATE ioctlAneesh Kumar K.V
The below patch add ioctl for migrating ext3 indirect block mapped inode to ext4 extent mapped inode. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Add inode version support in ext4Jean Noel Cordenner
This patch adds 64-bit inode version support to ext4. The lower 32 bits are stored in the osd1.linux1.l_i_version field while the high 32 bits are stored in the i_version_hi field newly created in the ext4_inode. This field is incremented in case the ext4_inode is large enough. A i_version mount option has been added to enable the feature. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Jean Noel Cordenner <jean-noel.cordenner@bull.net>
2008-01-28ext4: Add the journal checksum featureGirish Shilamkar
The journal checksum feature adds two new flags i.e JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT and JBD2_FEATURE_COMPAT_CHECKSUM. JBD2_FEATURE_CHECKSUM flag indicates that the commit block contains the checksum for the blocks described by the descriptor blocks. Due to checksums, writing of the commit record no longer needs to be synchronous. Now commit record can be sent to disk without waiting for descriptor blocks to be written to disk. This behavior is controlled using JBD2_FEATURE_ASYNC_COMMIT flag. Older kernels/e2fsck should not be able to recover the journal with _ASYNC_COMMIT hence it is made incompat. The commit header has been extended to hold the checksum along with the type of the checksum. For recovery in pass scan checksums are verified to ensure the sanity and completeness(in case of _ASYNC_COMMIT) of every transaction. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Girish Shilamkar <girish@clusterfs.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28ext4: Take read lock during overwrite case.Aneesh Kumar K.V
When we are overwriting a file and not actually allocating new file system blocks we need to take only the read lock on i_data_sem. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Convert truncate_mutex to read write semaphore.Aneesh Kumar K.V
We are currently taking the truncate_mutex for every read. This would have performance impact on large CPU configuration. Convert the lock to read write semaphore and take read lock when we are trying to read the file. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Make ext4_get_blocks_wrap take the truncate_mutex early.Aneesh Kumar K.V
When doing a migrate from ext3 to ext4 inode we need to make sure the test for inode type and walking inode data happens inside lock. To make this happen move truncate_mutex early before checking the i_flags. This actually should enable us to remove the verify_chain(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: remove unused code from ext4_find_entry()Mariusz Kozlowski
The unused code found in ext3_find_entry() is also present (and still unused) in the ext4_find_entry() code. This patch removes it. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: Check for the correct error return fromAneesh Kumar K.V
ext4_ext_get_blocks returns negative values on error. We should check for <= 0 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: add block bitmap validationAneesh Kumar K.V
When a new block bitmap is read from disk in read_block_bitmap() there are a few bits that should ALWAYS be set. In particular, the blocks given corresponding to block bitmap, inode bitmap and inode tables. Validate the block bitmap against these blocks. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Change the default behaviour on errorAneesh Kumar K.V
ext4 file system was by default ignoring errors and continuing. This is not a good default as continuing on error could lead to file system corruption. Change the default to mark the file system readonly. Debian and ubuntu already does this as the default in their fstab. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28ext4: fix oops on corrupted ext4 mountEric Sandeen
When mounting an ext4 filesystem with corrupted s_first_data_block, things can go very wrong and oops. Because blocks_count in ext4_fill_super is a u64, and we must use do_div, the calculation of db_count is done differently than on ext4. If first_data_block is corrupted such that it is larger than ext4_blocks_count, for example, then the intermediate blocks_count value may go negative, but sign-extend to a very large value: blocks_count = (ext4_blocks_count(es) - le32_to_cpu(es->s_first_data_block) + EXT4_BLOCKS_PER_GROUP(sb) - 1); This is then assigned to s_groups_count which is an unsigned long: sbi->s_groups_count = blocks_count; This may result in a value of 0xFFFFFFFF which is then used to compute db_count: db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) / EXT4_DESC_PER_BLOCK(sb); and in this case db_count will wind up as 0 because the addition overflows 32 bits. This in turn causes the kmalloc for group_desc to be of 0 size: sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *), GFP_KERNEL); and eventually in ext4_check_descriptors, dereferencing sbi->s_group_desc[desc_block] will result in a NULL pointer dereference. The simplest test seems to be to sanity check s_first_data_block, EXT4_BLOCKS_PER_GROUP, and ext4_blocks_count values to be sure their combination won't result in a bad intermediate value for blocks_count. We could just check for db_count == 0, but catching it at the root cause seems like it provides more info. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28ext4/super.c: fix #ifdef's (CONFIG_EXT4_* -> CONFIG_EXT4DEV_*)Adrian Bunk
Based on a report by Robert P. J. Day. Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-01-28ext4: Return after ext4_error in case of failuresAneesh Kumar K.V
This fix some instances where we were continuing after calling ext4_error. ext4_error call panic only if errors=panic mount option is set. So we need to make sure we return correctly after ext4_error call Reported by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: store maxbytes for bitmapped files and return EFBIG as appropriateEric Sandeen
Calculate & store the max offset for bitmapped files, and catch too-large seeks, truncates, and writes in ext4, shortening or rejecting as appropriate. Signed-off-by: Eric Sandeen <sandeen@redhat.com>
2008-01-28ext4: different maxbytes functions for bitmap & extent filesEric Sandeen
use 2 different maxbytes functions for bitmapped & extent-based files. Signed-off-by: Eric Sandeen <sandeen@redhat.com>
2008-01-28ext4: Support large filesAneesh Kumar K.V
This patch converts ext4_inode i_blocks to represent total blocks occupied by the inode in file system block size. Earlier the variable used to represent this in 512 byte block size. This actually limited the total size of the file. The feature is enabled transparently when we write an inode whose i_blocks cannot be represnted as 512 byte units in a 48 bit variable. inode flag EXT4_HUGE_FILE_FL Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Add support for 48 bit inode i_blocks.Aneesh Kumar K.V
Use the __le16 l_i_reserved1 field of the linux2 struct of ext4_inode to represet the higher 16 bits for i_blocks. With this change max_file size becomes (2**48 -1 )* 512 bytes. We add a RO_COMPAT feature to the super block to indicate that inode have i_blocks represented as a split 48 bits. Super block with this feature set cannot be mounted read write on a kernel with CONFIG_LSF disabled. Super block flag EXT4_FEATURE_RO_COMPAT_HUGE_FILE Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Rename i_dir_acl to i_size_highAneesh Kumar K.V
Rename ext4_inode.i_dir_acl to i_size_high drop ext4_inode_info.i_dir_acl as it is not used Rename ext4_inode.i_size to ext4_inode.i_size_lo Add helper function for accessing the ext4_inode combined i_size. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Rename i_file_acl to i_file_acl_loAneesh Kumar K.V
Rename i_file_acl to i_file_acl_lo. This helps in finding bugs where we use i_file_acl instead of the combined i_file_acl_lo and i_file_acl_high Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Fix sparse warnings.Aneesh Kumar K.V
Fix sparse warnings related to static functions and local variables. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: Introduce ext4_update_*_featureAneesh Kumar K.V
Introduce ext4_update_*_feature and use them instead of opencoding. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28ext4: fixes block group number being set to a negative valueAvantika Mathur
This patch fixes various places where the group number is set to a negative value. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28ext4: add ext4_group_t, and change all group variables to this type.Avantika Mathur
In many places variables for block group are of type int, which limits the maximum number of block groups to 2^31. Each block group can have up to 2^15 blocks, with a 4K block size, and the max filesystem size is limited to 2^31 * (2^15 * 2^12) = 2^58 -- or 256 PB This patch introduces a new type ext4_group_t, of type unsigned long, to represent block group numbers in ext4. All occurrences of block group variables are converted to type ext4_group_t. Signed-off-by: Avantika Mathur <mathur@us.ibm.com>
2008-01-28ext4 extents: remove unneeded castsEric Sandeen
There are many casts in extents.c which are not needed, as the variables are already the type of the cast, or are being promoted for no particular reason in printk's. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28ext4: Introduce ext4_lblk_tAneesh Kumar K.V
This patch adds a new data type ext4_lblk_t to represent the logical file blocks. This is the preparatory patch to support large files in ext4 The follow up patch with convert the ext4_inode i_blocks to represent the number of blocks in file system block size. This changes makes it possible to have a block number 2**32 -1 which will result in overflow if the block number is represented by signed long. This patch convert all the block number to type ext4_lblk_t which is typedef to __u32 Also remove dead code ext4_ext_walk_space Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com>
2008-01-28ext4: Avoid rec_len overflow with 64KB block sizeJan Kara
With 64KB blocksize, a directory entry can have size 64KB which does not fit into 16 bits we have for entry lenght. So we store 0xffff instead and convert value when read from / written to disk. The patch also converts some places to use ext4_next_entry() when we are changing them anyway. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28ext4: Support large blocksize up to PAGESIZETakashi Sato
This patch set supports large block size(>4k, <=64k) in ext4, just enlarging the block size limit. But it is NOT possible to have 64kB blocksize on ext4 without some changes to the directory handling code. The reason is that an empty 64kB directory block would have a rec_len == (__u16)2^16 == 0, and this would cause an error to be hit in the filesystem. The proposed solution is treat 64k rec_len with a an impossible value like rec_len = 0xffff to handle this. The Patch-set consists of the following 2 patches. [1/2] ext4: enlarge blocksize - Allow blocksize up to pagesize [2/2] ext4: fix rec_len overflow - prevent rec_len from overflow with 64KB blocksize Now on 64k page ppc64 box runs with this patch set we could create a 64k block size ext4dev, and able to handle empty directory block. Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp> Signed-off-by: Mingming Cao <cmm@us.ibm.com>