aboutsummaryrefslogtreecommitdiff
path: root/fs/fuse/inode.c
AgeCommit message (Collapse)Author
2007-11-29fuse: fix uninitialized field in fuse_inodeJohn Muir
I found problems accessing (executing) previously existing files, until I did chmod on them (or setattr). If the fi->attr_version is not initialized, then it could be larger than fc->attr_version until a setattr is executed, and as a result the inode attributes would never be set. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix FUSE_FILE_OPS sendingMiklos Szeredi
FUSE_FILE_OPS is meant to signal that the kernel will send the open file to to the userspace filesystem for operations on open files, so that sillyrenaming unlinked files becomes unnecessary. However this needs VFS changes, which won't make it into 2.6.24. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add blksize field to fuse_attrMiklos Szeredi
There are cases when the filesystem will be passed the buffer from a single read or write call, namely: 1) in 'direct-io' mode (not O_DIRECT), read/write requests don't go through the page cache, but go directly to the userspace fs 2) currently buffered writes are done with single page requests, but if Nick's ->perform_write() patch goes it, it will be possible to do larger write requests. But only if the original write() was also bigger than a page. In these cases the filesystem might want to give a hint to the app about the optimal I/O size. Allow the userspace filesystem to supply a blksize value to be returned by stat() and friends. If the field is zero, it defaults to the old PAGE_CACHE_SIZE value. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add list of writable files to fuse_inodeMiklos Szeredi
Each WRITE request must carry a valid file descriptor. When a page is written back from a memory mapping, the file through which the page was dirtied is not available, so a new mechananism is needed to find a suitable file in ->writepage(s). A list of fuse_files is added to fuse_inode. The file is removed from the list in fuse_release(). This patch is in preparation for writable mmap support. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add atomic open+truncate supportMiklos Szeredi
This patch allows fuse filesystems to implement open(..., O_TRUNC) as a single request, instead of separate truncate and open requests. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add file handle to getattr operationMiklos Szeredi
Add necessary protocol changes for supplying a file handle with the getattr operation. Step the API version to 7.9. This patch doesn't actually supply the file handle, because that needs some kind of VFS support, which we haven't yet been able to agree upon. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: fix race between getattr and writeMiklos Szeredi
Getattr and lookup operations can be running in parallel to attribute changing operations, such as write and setattr. This means, that if for example getattr was slower than a write, the cached size attribute could be set to a stale value. To prevent this race, introduce a per-filesystem attribute version counter. This counter is incremented whenever cached attributes are modified, and the incremented value stored in the inode. Before storing new attributes in the cache, getattr and lookup check, using the version number, whether the attributes have been modified during the request's lifetime. If so, the returned attributes are not cached, because they might be stale. Thanks to Jakub Bogusz for the bug report and test program. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Jakub Bogusz <jakub.bogusz@gemius.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: fix allowing operationsMiklos Szeredi
The following operation didn't check if sending the request was allowed: setattr listxattr statfs Some other operations don't explicitly do the check, but VFS calls ->permission() which checks this. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: fix permission checking on sticky directoriesMiklos Szeredi
The VFS checks sticky bits on the parent directory even if the filesystem defines it's own ->permission(). In some situations (sshfs, mountlo, etc) the user does have permission to delete a file even if the attribute based checking would not allow it. So work around this by storing the permission bits separately and returning them in stat(), but cutting the permission bits off from inode->i_mode. This is slightly hackish, but it's probably not worth it to add new infrastructure in VFS and a slight performance penalty for all filesystems, just for the sake of fuse. [Jan Engelhardt] cosmetic fixes Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: set i_nlink to sane value after mountMiklos Szeredi
Aufs seems to depend on a positive i_nlink value. So fill in a dummy but sane value for the root inode at mount time. The inode attributes are refreshed with the correct values at the first opportunity. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: fix page invalidationMiklos Szeredi
Other than truncate, there are two cases, when fuse tries to get rid of cached pages: a) in open, if KEEP_CACHE flag is not set b) in getattr, if file size changed spontaneously Until now invalidate_mapping_pages() were used, which didn't get rid of mapped pages. This is wrong, and becomes more wrong as dirty pages are introduced. So instead properly invalidate all pages with invalidate_inode_pages2(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: truncate on spontaneous size changeMiklos Szeredi
Memory mappings were only truncated on an explicit truncate, but not when the file size was changed externally. Fix this by moving the truncation code from fuse_setattr to fuse_change_attributes. Yes, there are races between write and and external truncation, but we can't really do anything about them. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: fix reserved request wake upMiklos Szeredi
Use wake_up_all instead of wake_up in put_reserved_req(), otherwise it is possible that the right task is not woken up. Also create a separate reserved_req_waitq in addition to the blocked_waitq, since they fulfill totally separate functions. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Slab API: remove useless ctor parameter and reorder parametersChristoph Lameter
Slab constructors currently have a flags parameter that is never used. And the order of the arguments is opposite to other slab functions. The object pointer is placed before the kmem_cache pointer. Convert ctor(void *object, struct kmem_cache *s, unsigned long flags) to ctor(struct kmem_cache *s, void *object) throughout the kernel [akpm@linux-foundation.org: coupla fixes] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17mm: bdi init hooksPeter Zijlstra
provide BDI constructor/destructor hooks [akpm@linux-foundation.org: compile fix] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20mm: Remove slab destructors from kmem_cache_create().Paul Mundt
Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-16fuse: ->fs_flags fixletAlexey Dobriyan
fs/fuse/inode.c:658:3: error: Initializer entry defined twice fs/fuse/inode.c:661:3: also defined here Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23fuse: delete inode on dropMiklos Szeredi
When inode is dropped (no more references) delete it from cache. There's not much point in keeping it cached, when a new lookup will refresh the attributes anyway. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Detach sched.h from mm.hAlexey Dobriyan
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17Remove SLAB_CTOR_CONSTRUCTORChristoph Lameter
SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: David Howells <dhowells@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@ucw.cz> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08add filesystem subtype supportMiklos Szeredi
There's a slight problem with filesystem type representation in fuse based filesystems. From the kernel's view, there are just two filesystem types: fuse and fuseblk. From the user's view there are lots of different filesystem types. The user is not even much concerned if the filesystem is fuse based or not. So there's a conflict of interest in how this should be represented in fstab, mtab and /proc/mounts. The current scheme is to encode the real filesystem type in the mount source. So an sshfs mount looks like this: sshfs#user@server:/ /mnt/server fuse rw,nosuid,nodev,... This url-ish syntax works OK for sshfs and similar filesystems. However for block device based filesystems (ntfs-3g, zfs) it doesn't work, since the kernel expects the mount source to be a real device name. A possibly better scheme would be to encode the real type in the type field as "type.subtype". So fuse mounts would look like this: /dev/hda1 /mnt/windows fuseblk.ntfs-3g rw,... user@server:/ /mnt/server fuse.sshfs rw,nosuid,nodev,... This patch adds the necessary code to the kernel so that this can be correctly displayed in /proc/mounts. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07slab allocators: Remove SLAB_DEBUG_INITIAL flagChristoph Lameter
I have never seen a use of SLAB_DEBUG_INITIAL. It is only supported by SLAB. I think its purpose was to have a callback after an object has been freed to verify that the state is the constructor state again? The callback is performed before each freeing of an object. I would think that it is much easier to check the object state manually before the free. That also places the check near the code object manipulation of the object. Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was compiled with SLAB debugging on. If there would be code in a constructor handling SLAB_DEBUG_INITIAL then it would have to be conditional on SLAB_DEBUG otherwise it would just be dead code. But there is no such code in the kernel. I think SLUB_DEBUG_INITIAL is too problematic to make real use of, difficult to understand and there are easier ways to accomplish the same effect (i.e. add debug code before kfree). There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be clear in fs inode caches. Remove the pointless checks (they would even be pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors. This is the last slab flag that SLUB did not support. Remove the check for unimplemented flags from SLUB. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02remove "struct subsystem" as it is no longer neededGreg Kroah-Hartman
We need to work on cleaning up the relationship between kobjects, ksets and ktypes. The removal of 'struct subsystem' is the first step of this, especially as it is not really needed at all. Thanks to Kay for fixing the bugs in this patch. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-08[PATCH] fuse: validate rootmode mount optionTimo Savola
If rootmode isn't valid, we hit the BUG() in fuse_init_inode. Now EINVAL is returned. Signed-off-by: Timo Savola <tsavola@movial.fi> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Mark struct super_operations constJosef 'Jeff' Sipek
This patch is inspired by Arjan's "Patch series to mark struct file_operations and struct inode_operations const". Compile tested with gcc & sparse. Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] remove invalidate_inode_pages()Andrew Morton
Convert all calls to invalidate_inode_pages() into open-coded calls to invalidate_mapping_pages(). Leave the invalidate_inode_pages() wrapper in place for now, marked as deprecated. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-07[PATCH] fuse: fix compile without CONFIG_BLOCKMiklos Szeredi
Randy Dunlap wote: > Should FUSE depend on BLOCK? Without that and with BLOCK=n, I get: > > inode.c:(.text+0x3acc5): undefined reference to `sb_set_blocksize' > inode.c:(.text+0x3a393): undefined reference to `get_sb_bdev' > fs/built-in.o:(.data+0xd718): undefined reference to `kill_block_super Most fuse filesystems work fine without block device support, so I think a better solution is to disable the 'fuseblk' filesystem type if BLOCK=n. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] fuse: add DESTROY operationMiklos Szeredi
Add a DESTROY operation for block device based filesystems. With the help of this operation, such a filesystem can flush dirty data to the device synchronously before the umount returns. This is needed in situations where the filesystem is assumed to be clean immediately after unmount (e.g. ejecting removable media). Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] fuse: add blksize optionMiklos Szeredi
Add 'blksize' option for block device based filesystems. During initialization this is used to set the block size on the device and the super block. The default block size is 512bytes. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] fuse: add support for block device based filesystemsMiklos Szeredi
I never intended this, but people started using fuse to implement block device based "real" filesystems (ntfs-3g, zfs). The following four patches add better support for these kinds of filesystems. Unlike "normal" fuse filesystems, using this feature should require superuser privileges (enforced by the fusermount utility). Thanks to Szabolcs Szakacsits for the input and testing. This patch adds a 'fuseblk' filesystem type, which is only different from the 'fuse' filesystem type in how the 'dev_name' mount argument is interpreted. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove kmem_cache_tChristoph Lameter
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove SLAB_KERNELChristoph Lameter
SLAB_KERNEL is an alias of GFP_KERNEL. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17[PATCH] fuse: fix handling of moved directoryMiklos Szeredi
Fuse considered it an error (EIO) if lookup returned a directory inode, to which a dentry already refered. This is because directory aliases are not allowed. But in a network filesystem this could happen legitimately, if a directory is moved on a remote client. This patch attempts to relax the restriction by trying to first evict the offending alias from the cache. If this fails, it still returns an error (EBUSY). A rarer situation is if an mkdir races with an indenpendent lookup, which finds the newly created directory already moved. In this situation the mkdir should return success, but that would be incorrect, since the dentry cannot be instantiated, so return EBUSY. Previously checking for a directory alias and instantiation of the dentry weren't done atomically in lookup/mkdir, hence two such calls racing with each other could create aliased directories. To prevent this introduce a new per-connection mutex: fuse_conn->inst_mutex, which is taken for instantiations with a directory inode. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17[PATCH] fuse: fix spurious BUGMiklos Szeredi
Fix a spurious BUG in an unlikely race, where at least three parallel lookups return the same inode, but with different file type. This has not yet been observed in real life. Allowing unlimited retries could delay fuse_iget() indefinitely, but this is really for the broken userspace filesystem to worry about. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17[PATCH] fuse: locking fix for nlookupMiklos Szeredi
An inode could be returned by independent parallel lookups, in this case an update of the lookup counter could be lost resulting in a memory leak in userspace. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17[PATCH] fuse: fix hang on SMPMiklos Szeredi
Fuse didn't always call i_size_write() with i_mutex held which caused rare hangs on SMP/32bit. This bug has been present since fuse-2.2, well before being merged into mainline. The simplest solution is to protect i_size_write() with the per-connection spinlock. Using i_mutex for this purpose would require some restructuring of the code and I'm not even sure it's always safe to acquire i_mutex in all places i_size needs to be set. Since most of vmtruncate is already duplicated for other reasons, duplicate the remaining part as well, making all i_size_write() calls internal to fuse. Using i_size_write() was unnecessary in fuse_init_inode(), since this function is only called on a newly created locked inode. Reported by a few people over the years, but special thanks to Dana Henriksen who was persistent enough in helping me debug it. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29[PATCH] fuse: use dentry in statfsMiklos Szeredi
Some filesystems may want to report different values depending on the path within the filesystem, i.e. one mount is actually several filesystems. This can be the case for a network filesystem exported by an unprivileged server (e.g. sshfs). This is now possible, thanks to David Howells "VFS: Permit filesystem to perform statfs with a known root dentry" patch. This change is backward compatible, so no need to change interface version. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] inode-diet: Eliminate i_blksize from the inode structureTheodore Ts'o
This eliminates the i_blksize field from struct inode. Filesystems that want to provide a per-inode st_blksize can do so by providing their own getattr routine instead of using the generic_fillattr() function. Note that some filesystems were providing pretty much random (and incorrect) values for i_blksize. [bunk@stusta.de: cleanup] [akpm@osdl.org: generic_fillattr() fix] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-31[PATCH] fuse: use jiffies_64Miklos Szeredi
It is entirely possible (though rare) that jiffies half-wraps around, while a dentry/inode remains in the cache. This could mean that the dentry/inode is not invalidated for another half wraparound-time. To get around this problem, use 64-bit jiffies. The only problem with this is that dentry->d_time is 32 bits on 32-bit archs. So use d_fsdata as the high 32 bits. This is an ugly hack, but far simpler, than having to allocate private data just for this purpose. Since 64-bit jiffies can be assumed never to wrap around, simple comparison can be used, and a zero time value can represent "invalid". Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25Merge git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (51 commits) nfs: remove nfs_put_link() nfs-build-fix-99 git-nfs-build-fixes Merge branch 'odirect' NFS: alloc nfs_read/write_data as direct I/O is scheduled NFS: Eliminate nfs_get_user_pages() NFS: refactor nfs_direct_free_user_pages NFS: remove user_addr, user_count, and pos from nfs_direct_req NFS: "open code" the NFS direct write rescheduler NFS: Separate functions for counting outstanding NFS direct I/Os NLM: Fix reclaim races NLM: sem to mutex conversion locks.c: add the fl_owner to nlm_compare_locks NFS: Display the chosen RPCSEC_GSS security flavour in /proc/mounts NFS: Split fs/nfs/inode.c NFS: Fix typo in nfs_do_clone_mount() NFS: Fix compile errors introduced by referrals patches NFSv4: Ensure that referral mounts bind to a reserved port NFSv4: A root pathname is sent as a zero component4 NFSv4: Follow a referral ...
2006-06-25[PATCH] fuse: scramble lock owner IDMiklos Szeredi
VFS uses current->files pointer as lock owner ID, and it wouldn't be prudent to expose this value to userspace. So scramble it with XTEA using a per connection random key, known only to the kernel. Only one direction needs to be implemented, since the ID is never sent in the reverse direction. The XTEA algorithm is implemented inline since it's simple enough to do so, and this adds less complexity than if the crypto API were used. Thanks to Jesper Juhl for the idea. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] fuse: add request interruptionMiklos Szeredi
Add synchronous request interruption. This is needed for file locking operations which have to be interruptible. However filesystem may implement interruptibility of other operations (e.g. like NFS 'intr' mount option). Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] fuse: add POSIX file locking supportMiklos Szeredi
This patch adds POSIX file locking support to the fuse interface. This implementation doesn't keep any locking state in kernel. Unlocking on close() is handled by the FLUSH message, which now contains the lock owner id. Mandatory locking is not supported. The filesystem may enfoce mandatory locking in userspace if needed. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] fuse: add control filesystemMiklos Szeredi
Add a control filesystem to fuse, replacing the attributes currently exported through sysfs. An empty directory '/sys/fs/fuse/connections' is still created in sysfs, and mounting the control filesystem here provides backward compatibility. Advantages of the control filesystem over the previous solution: - allows the object directory and the attributes to be owned by the filesystem owner, hence letting unpriviled users abort the filesystem connection - does not suffer from module unload race [akpm@osdl.org: fix this fs for recent dhowells depredations] [akpm@osdl.org: fix 64-bit printk warnings] Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] fuse: no backgrounding on interruptMiklos Szeredi
Don't put requests into the background when a fatal interrupt occurs while the request is in userspace. This removes a major wart from the implementation. Backgrounding of requests was introduced to allow breaking of deadlocks. However now the same can be achieved by aborting the filesystem through the 'abort' sysfs attribute. This is a change in the interface, but should not cause problems, since these kinds of deadlocks never happen during normal operation. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-24Merge branch 'master' of /home/trondmy/kernel/linux-2.6/Trond Myklebust
Conflicts: fs/nfs/inode.c fs/super.c Fix conflicts between patch 'NFS: Split fs/nfs/inode.c' and patch 'VFS: Permit filesystem to override root dentry on mount'
2006-06-23[PATCH] VFS: Permit filesystem to perform statfs with a known root dentryDavid Howells
Give the statfs superblock operation a dentry pointer rather than a superblock pointer. This complements the get_sb() patch. That reduced the significance of sb->s_root, allowing NFS to place a fake root there. However, NFS does require a dentry to use as a target for the statfs operation. This permits the root in the vfsmount to be used instead. linux/mount.h has been added where necessary to make allyesconfig build successfully. Interest has also been expressed for use with the FUSE and XFS filesystems. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] VFS: Permit filesystem to override root dentry on mountDavid Howells
Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-09VFS: Remove dependency of ->umount_begin() call on MNT_FORCETrond Myklebust
Allow filesystems to decide to perform pre-umount processing whether or not MNT_FORCE is set. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-04-26[fuse] fix race between checking and setting file->private_dataMiklos Szeredi
BKL does not protect against races if the task may sleep between checking and setting a value. So move checking of file->private_data near to setting it in fuse_fill_super(). Found by Al Viro. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>