aboutsummaryrefslogtreecommitdiff
path: root/fs/gfs2/glops.c
AgeCommit message (Collapse)Author
2008-05-12[GFS2] filesystem consistency error from do_stripBob Peterson
This patch fixes a GFS2 filesystem consistency error reported from function do_strip. The problem was caused by a timing window that allowed two vfs inodes to be created in memory that point to the same file. The problem is fixed by making the vfs's iget_test, iget_set mechanism check and set a new bit in the in-core gfs2_inode structure while the vfs inode spin_lock is held. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Remove rgrp and glock version numbersBob Peterson
This patch further reduces GFS2's memory requirements by eliminating the 64-bit version number fields in lieu of a couple bits. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Reorder writeback for glock syncSteven Whitehouse
Previously we were doing (write data, wait for data, write metadata, wait for metadata). After this patch we so (write metadata, write data, wait for data, wait for metadata) which should be more efficient. Also I noticed that the drop_bh and xmote_bh functions were almost identical. In fact the only difference was a single test, and that test is such that in the drop_bh case, it would always evaluate to the correct result. As such we can use the xmote_bh functions in all the places where we were using the drop_bh function and remove the drop_bh functions. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove useless i_cache from inodesSteven Whitehouse
The i_cache was designed to keep references to the indirect blocks used during block mapping so that they didn't have to be looked up continually. The idea failed because there are too many places where the i_cache needs to be freed, and this has in the past been the cause of many bugs. In addition there was no performance benefit being gained since the disk blocks in question were cached anyway. So this patch removes it in order to simplify the code to prepare for other changes which would otherwise have had to add further support for this feature. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Use ->page_mkwrite() for mmap()Steven Whitehouse
This cleans up the mmap() code path for GFS2 by implementing the page_mkwrite function for GFS2. We are thus able to use the generic filemap_fault function for our ->fault() implementation. This now means that shared writable mappings will be much more efficiently shared across the cluster if there is a reasonable proportion of read activity (the greater proportion, the better). As a side effect, it also reduces the size of the code, removes special cases from readpage and readpages, and makes the code path easier to follow. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] Clean up gfs2_trans_add_revoke()Steven Whitehouse
The following alters gfs2_trans_add_revoke() to take a struct gfs2_bufdata as an argument. This eliminates the memory allocation which was previously required by making use of the already existing struct gfs2_bufdata. It makes some sanity checks to ensure that the gfs2_bufdata has been removed from all the lists before its recycled as a revoke structure. This saves one memory allocation and one free per revoke structure. Also as a result, and to simplify the locking, since there is no longer any blocking code in gfs2_trans_add_revoke() we must hold the log lock whenever this function is called. This reduces the amount of times we take and unlock the log lock. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] Introduce gfs2_remove_from_ailSteven Whitehouse
This collects together the operations required to remove a gfs2_bufdata from the ail lists. Its only called from two places to start with, but expect to see more of this function in future. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] delay glock demote for a minimum hold timeBenjamin Marzinski
When a lot of IO, with some distributed mmap IO, is run on a GFS2 filesystem in a cluster, it will deadlock. The reason is that do_no_page() will repeatedly call gfs2_sharewrite_nopage(), because each node keeps giving up the glock too early, and is forced to call unmap_mapping_range(). This bumps the mapping->truncate_count sequence count, forcing do_no_page() to retry. This patch institutes a minimum glock hold time a tenth a second. This insures that even in heavy contention cases, the node has enough time to get some useful work done before it gives up the glock. A second issue is that when gfs2_glock_dq() is called from within a page fault to demote a lock, and the associated page needs to be written out, it will try to acqire a lock on it, but it has already been locked at a higher level. This patch puts makes gfs2_glock_dq() use the work queue as well, to avoid this issue. This is the same patch as Steve Whitehouse originally proposed to fix this issue, execpt that gfs2_glock_dq() now grabs a reference to the glock before it queues up the work on it. Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] Clean up invalidatepage/releasepageSteven Whitehouse
This patch fixes some bugs relating to journaled data files by cleaning up the gfs2_invalidatepage() and gfs2_releasepage() functions. We now never block during gfs2_releasepage(), instead we always either release or refuse to release depending on the status of the buffers. This fixes Red Hat bugzillas #248969 and #252392. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Bob Peterson <rpeterso@redhat.com>
2007-07-09[GFS2] flush the glock completely in inode_go_syncBenjamin Marzinski
Fix for bz #231910 When filemap_fdatawrite() is called on the inode mapping in data=ordered mode, it will add the glock to the log. In inode_go_sync(), if you do the gfs2_log_flush() before this, after the filemap_fdatawrite() call, the glock and its associated data buffers will be on the log again. This means you can demote a lock from exclusive, without having it flushed from the log. The attached patch simply moves the gfs2_log_flush up to after the filemap_fdatawrite() call. Originally, I tried moving the gfs2_log_flush to after gfs2_meta_sync(), but that caused me to trip the following assert. GFS2: fsid=cypher-36:test.0: fatal: assertion "!buffer_busy(bh)" failed GFS2: fsid=cypher-36:test.0: function = gfs2_ail_empty_gl, file = fs/gfs2/glops.c, line = 61 It appears that gfs2_log_flush() puts some of the glocks buffers in the busy state and the filemap_fdatawrite() call is necessary to flush them. This makes me worry slightly that a related problem could happen because of moving the gfs2_log_flush() after the initial filemap_fdatawrite(), but I assume that gfs2_ail_empty_gl() would catch that case as well. Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-08Factor outstanding I/O error handlingGuillaume Chazarain
Cleanup: setting an outstanding error on a mapping was open coded too many times. Factor it out in mapping_set_error(). Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-07[GFS2] Fix bz 229873, alternate test: assertion ↵Steven Whitehouse
"!ip->i_inode.i_mapping->nrpages" failed The following removes an incorrect assertion from the GFS2 glops code. This fixes Red Hat bz 229873. Thanks to Abhijith Das for testing the patch and confirming the fix. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Abhijith Das <adas@redhat.com>
2007-03-07[GFS2] Fix bz 230143, incorrect flushing of rgrpsSteven Whitehouse
The below patch fixes a problem where we were not flushing rgrps correctly. It only occurred in the specific case that a callback was received for an rgrp which was dirty and when a journal log flush had not already resulted in the rgrp being flushed anyway. This fixes Red Hat bz 230143, Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-05[GFS2] Tidy up glops callsSteven Whitehouse
This patch doesn't make any changes to the ordering of the various operations related to glocking, but it does tidy up the calls to the glops.c functions to make the structure more obvious. The two functions: gfs2_glock_xmote_th() and gfs2_glock_drop_th() can be made static within glock.c since they are called by every set of glock operations. The xmote_th and drop_th glock operations are then made conditional upon those two routines existing and called from the previously mentioned functions in glock.c respectively. Also it can be seen that the go_sync operation isn't needed since it can easily be replaced by calls to xmote_bh and drop_bh respectively. This results in no longer (confusingly) calling back into routines in glock.c from glops.c and also reducing the glock operations by one member. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05[GFS2] Remove local exclusive glock modeSteven Whitehouse
Here is a patch for GFS2 to remove the local exclusive flag. In the places it was used, mutex's are always held earlier in the call path, so it appears redundant in the LM_ST_SHARED case. Also, the GFS2 holders were setting local exclusive in any case where the requested lock was LM_ST_EXCLUSIVE. So the other places in the glock code where the flag was tested have been replaced with tests for the lock state being LM_ST_EXCLUSIVE in order to ensure the logic is the same as before (i.e. LM_ST_EXCLUSIVE is always locally exclusive as well as globally exclusive). Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05[GFS2] Remove the "greedy" function from glock.[ch]Steven Whitehouse
The "greedy" code was an attempt to retain glocks for a minimum length of time when they relate to mmap()ed files. The current implementation of this feature is not, however, ideal in that it required allocating memory in order to do this and its overly complicated. It also misses the mark by ignoring the other I/O operations which are just as likely to suffer from the same problem. So the plan is to remove this now and then add the functionality back as part of the glock state machine at a later date (and thus take into account all the possible users of this feature) Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Fix journal flush problemSteven Whitehouse
This fixes a bug which resulted in poor performance due to flushing the journal too often. The code path in question was via the inode_go_sync() function in glops.c. The solution is not to flush the journal immediately when inodes are ejected from memory, but batch up the work for glockd to deal with later on. This means that glocks may now live on beyond the end of the lifetime of their inodes (but not very much longer in the normal case). Also fixed in this patch is a bug (which was hidden by the bug mentioned above) in calculation of the number of free journal blocks. The gfs2_logd process has been altered to be more responsive to the journal filling up. We now wake it up when the number of uncommitted journal blocks has reached the threshold level rather than trying to flush directly at the end of each transaction. This again means doing fewer, but larger, log flushes in general. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Simplify glops functionsSteven Whitehouse
The go_sync callback took two flags, but one of them was set on every call, so this patch removes once of the flags and makes the previously conditional operations (on this flag), unconditional. The go_inval callback took three flags, each of which was set on every call to it. This patch removes the flags and makes the operations unconditional, which makes the logic rather more obvious. Two now unused flags are also removed from incore.h. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Remove gfs2_inode_attr_inSteven Whitehouse
This function wasn't really doing the right thing. There was no need to update the inode size at this point and the updating of the i_blocks field has now been moved to the places where di_blocks is updated. A result of this patch and some those preceeding it is that unlocking a glock is now a much more efficient process, since there is no longer any requirement to copy data from the gfs2 inode into the vfs inode at this point. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Shrink gfs2_inode (8) - i_vnSteven Whitehouse
This shrinks the size of the gfs2_inode by 8 bytes by replacing the version counter with a one bit valid/invalid flag. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Shrink gfs2_inode (3) - di_modeSteven Whitehouse
This removes the duplicate di_mode field in favour of using the inode->i_mode field. This saves 4 bytes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_log_headAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03[GFS2] Move logging code into log.c (mostly)Steven Whitehouse
This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-21[GFS2] Tidy up meta_io codeSteven Whitehouse
Fix a bug in the directory reading code, where we might have dereferenced a NULL pointer in case of OOM. Updated the directory code to use the new & improved version of gfs2_meta_ra() which now returns the first block that was being read. Previously it was releasing it requiring following code to grab the block again at each point it was called. Also turned off readahead on directory lookups since we are reading a hash table, and therefore reading the entries in order is very unlikely. Readahead is still used for all other calls to the directory reading function (e.g. when growing the hash table). Removed the DIO_START constant. Everywhere this was used, it was used to unconditionally start i/o aside from a couple of places, so I've removed it and made the couple of exceptions to this rule into separate functions. Also hunted through the other DIO flags and removed them as arguments from functions which were always called with the same combination of arguments. Updated gfs2_meta_indirect_buffer to be a bit more efficient and hopefully also be a bit easier to read. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-19[GFS2] Export lm_interface to kernel headersFabio Massimo Di Nitto
lm_interface.h has a few out of the tree clients such as GFS1 and userland tools. Right now, these clients keeps a copy of the file in their build tree that can go out of sync. Move lm_interface.h to include/linux, export it to userland and clean up fs/gfs2 to use the new location. Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-09[GFS2] Remove unused function from glock.cSteven Whitehouse
The callback for iopen locks is unused, so this removes it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-05[GFS2] Fix end of multi-line structuresSteven Whitehouse
As per Jan Engelhardt's request, I've added a ',' to the end of each of the multi-line structures which didn't already have one (most already did). Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04[GFS2] Tidy up bmap/inode codeSteven Whitehouse
As per Jan Engelhardt's third set of comments, this make various code style changes and moves the structures from format.h into super.c, which was the only place that format.h was actually used. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-01[GFS2] Update copyright, tidy up incore.hSteven Whitehouse
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this updates the copyright message to say "version" in full rather than "v.2". Also incore.h has been updated to remove forward structure declarations which are not required. The gfs2_quota_lvb structure has now had endianess annotations added to it. Also quota.c has been updated so that we now store the lvb data locally in endian independant format to avoid needing a structure in host endianess too. As a result the endianess conversions are done as required at various points and thus the conversion routines in lvb.[ch] are no longer required. I've moved the one remaining constant in lvb.h thats used into lm.h and removed the unused lvb.[ch]. I have not changed the HIF_ constants. That is left to a later patch which I hope will unify the gh_flags and gh_iflags fields of the struct gfs2_holder. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-30[GFS2] Remove unused code from glock layerSteven Whitehouse
Remove the unused sync feature from glocks. This is currently done by calling the required functions to sync pages/blocks directly so this code isn't needed. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-30[GFS2] Make glock operations constSteven Whitehouse
For all the usual reasons of enforcing correctness and potentially reducing code size, this patch makes the glock operations const. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-07-27[GFS2] Use a bio to read the superblockSteven Whitehouse
This means that we don't need to create a special inode just to contain a struct address_space in order to read a single disk block. Instead we read the disk block directly. Its slightly faster, and uses slightly less memory, but the real reason for doing this is that it removes a special case from the glock code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-07-26[GFS2] Remove page.[ch]Steven Whitehouse
The remaining routines in page.c were all only used in one other file, so they are now moved into the files where they are referenced and made static. Thus page.[ch] are no longer required. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-06-19[GFS2] Remove debugging printksSteven Whitehouse
A few of my printks slipped through last time. Also fix a couple of minor bugs. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-06-14[GFS2] Fix unlinked file handlingSteven Whitehouse
This patch fixes the way we have been dealing with unlinked, but still open files. It removes all limits (other than memory for inodes, as per every other filesystem) on numbers of these which we can support on GFS2. It also means that (like other fs) its the responsibility of the last process to close the file to deallocate the storage, rather than the person who did the unlinking. Note that with GFS2, those two events might take place on different nodes. Also there are a number of other changes: o We use the Linux inode subsystem as it was intended to be used, wrt allocating GFS2 inodes o The Linux inode cache is now the point which we use for local enforcement of only holding one copy of the inode in core at once (previous to this we used the glock layer). o We no longer use the unlinked "special" file. We just ignore it completely. This makes unlinking more efficient. o We now use the 4th block allocation state. The previously unused state is used to track unlinked but still open inodes. o gfs2_inoded is no longer needed o Several fields are now no longer needed (and removed) from the in core struct gfs2_inode o Several fields are no longer needed (and removed) from the in core superblock There are a number of future possible optimisations and clean ups which have been made possible by this patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18[GFS2] Update copyright date to 2006Steven Whitehouse
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18[GFS2] Remove semaphore.h from C filesSteven Whitehouse
We no longer use semaphores, everything has been converted to mutex or rwsem, so we don't need to include this header any more. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-07[GFS2] Fix a ref count bug and other clean upsSteven Whitehouse
This fixes a ref count bug that sometimes showed up a umount time (causing it to hang) but it otherwise mostly harmless. At the same time there are some clean ups including making the log operations structures const, moving a memory allocation so that its not done in the fast path of checking to see if there is an outstanding transaction related to a particular glock. Removes the sd_log_wrap varaible which was updated, but never actually used anywhere. Updates the gfs2 ioctl() to run without the kernel lock (which it never needed anyway). Removes the "invalidate inodes" loop from GFS2's put_super routine. This is done in kill super anyway so we don't need to do it here. The loop was also bogus in that if there are any inodes "stuck" at this point its a bug and we need to know about it rather than hide it by hanging forever. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-27[GFS2] Macros removal in gfs2.hSteven Whitehouse
As suggested by Pekka Enberg <penberg@cs.helsinki.fi>. The DIV_RU macro is renamed DIV_ROUND_UP and and moved to kernel.h The other macros are gone from gfs2.h as (although not requested by Pekka Enberg) are a number of included header file which are now included individually. The inode number comparison function is now an inline function. The DT2IF and IF2DT may be addressed in a future patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-13[GFS2] Fix for root inode ref count bugSteven Whitehouse
Umount is now working correctly again. The bug was due to not getting an extra ref count when mounting the fs. We should have bumped it by two (once for the internal pointer to the root inode from the super block and once for the inode hanging off the dcache entry for root). Also this patch tidys up the code dealing with looking up and creating inodes. We now pass Linux inodes (with gfs2_inodes attached) rather than the other way around and this reduces code duplication in various places. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16[GFS2] The core of GFS2David Teigland
This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>