aboutsummaryrefslogtreecommitdiff
path: root/fs/gfs2/incore.h
AgeCommit message (Collapse)Author
2006-11-30[GFS2] Shrink gfs2_inode (8) - i_vnSteven Whitehouse
This shrinks the size of the gfs2_inode by 8 bytes by replacing the version counter with a one bit valid/invalid flag. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_statfs_changeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_inumAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs_rindexAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_log_headAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split and annotate gfs2_rgrpAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] split gfs2_sbAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] gfs2_dinode_host fields are host-endianAl Viro
Annotated scalar fields, dropped unused ones. Note that it's not at all obvious that we want to convert all of them to host-endian... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-21[GFS2] Tidy up meta_io codeSteven Whitehouse
Fix a bug in the directory reading code, where we might have dereferenced a NULL pointer in case of OOM. Updated the directory code to use the new & improved version of gfs2_meta_ra() which now returns the first block that was being read. Previously it was releasing it requiring following code to grab the block again at each point it was called. Also turned off readahead on directory lookups since we are reading a hash table, and therefore reading the entries in order is very unlikely. Readahead is still used for all other calls to the directory reading function (e.g. when growing the hash table). Removed the DIO_START constant. Everywhere this was used, it was used to unconditionally start i/o aside from a couple of places, so I've removed it and made the couple of exceptions to this rule into separate functions. Also hunted through the other DIO flags and removed them as arguments from functions which were always called with the same combination of arguments. Updated gfs2_meta_indirect_buffer to be a bit more efficient and hopefully also be a bit easier to read. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-20[GFS2] Remove unused constantsSteven Whitehouse
Three of the DIO constants were not being used, so remove them. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-13[GFS2] Use atomic_t rather than kref in glock.cSteven Whitehouse
Use atomic_t as the ref count in glocks rather than a kref. This is another step towards using RCU for the glock hash. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-12[GFS2] Use hlist for glock hash chainsSteven Whitehouse
This results in smaller list heads, so that we can have more chains in the same amount of memory (twice as many). I've multiplied the size of the table by four though - this is because we are saving memory by not having one lock per chain any more. So we land up using about the same amount of memory for the hash table as we did before I started these changes, the difference being that we now have four times as many hash chains. The reason that I say "about the same amount of memory" is that the actual amount now depends upon the NR_CPUS and some of the config variables, so that its not exact and in some cases we do use more memory. Eventually we might want to scale the hash table size according to the size of physical ram as measured on module load. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-11[GFS2] Rewrite of examine_bucket()Steven Whitehouse
The existing implementation of this function in glock.c was not very efficient as it relied upon keeping a cursor element upon the hash chain in question and moving it along. This new version improves upon this by using the current element as a cursor. This is possible since we only look at the "next" element in the list after we've taken the read_lock() subsequent to calling the examiner function. Obviously we have to eventually drop the ref count that we are then left with and we cannot do that while holding the read_lock, so we do that next time we drop the lock. That means either just before we examine another glock, or when the loop has terminated. The new implementation has several advantages: it uses only a read_lock() rather than a write_lock(), so it can run simnultaneously with other code, it doesn't need a "plug" element, so that it removes a test not only from this list iterator, but from all the other glock list iterators too. So it makes things faster and smaller. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-09[GFS2] Make glock hash locks proportional to NR_CPUSSteven Whitehouse
Make the number of locks used for hash chains in glock.c proportional to NR_CPUS. Also move constants for the number of hash chains into glock.c from incore.h since they are not used outside of glock.c. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-08[GFS2] Move rwlocks in glock.c into their own arraySteven Whitehouse
This splits the rwlocks guarding the hash chains of the glock hash table into their own array. This will reduce memory usage in some cases due to better alignment, although the real reason for doing it is to allow the two tables to be different sizes in future (i.e. the locks will be sized proportionally with the max number of CPUs and the hash chains sized proportinally with the size of physical memory) In order to allow this, the gl_bucket member of struct gfs2_glock has now become gl_hash, so we record the hash rather than a pointer to the bucket itself. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-08[GFS2] Use void * instead of typedef for locking module interfaceSteven Whitehouse
As requested by Jan Engelhardt, this removes the typedefs in the locking module interface and replaces them with void *. Also since we are changing the interface, I've added a few consts as well. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Cc: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-07[GFS2] Move glock hash table out of superblockSteven Whitehouse
There are several reasons why we want to do this: - Firstly its large and thus we'll scale better with multiple GFS2 fs mounted at the same time - Secondly its easier to scale its size as required (thats a plan for later patches) - Thirdly, we can use kzalloc rather than vmalloc when allocating the superblock (its now only 4888 bytes) - Fourth its all part of my plan to eventually be able to use RCU with the glock hash. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-05[GFS2] Make headers compile on their ownSteven Whitehouse
As per Jan Engelhardt's comments, this should make all the headers compile on their own by including and/or declaring structures early. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04[GFS2] Change all types to uX styleSteven Whitehouse
This makes all fixed size types have consistent names. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-01[GFS2] Update copyright, tidy up incore.hSteven Whitehouse
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this updates the copyright message to say "version" in full rather than "v.2". Also incore.h has been updated to remove forward structure declarations which are not required. The gfs2_quota_lvb structure has now had endianess annotations added to it. Also quota.c has been updated so that we now store the lvb data locally in endian independant format to avoid needing a structure in host endianess too. As a result the endianess conversions are done as required at various points and thus the conversion routines in lvb.[ch] are no longer required. I've moved the one remaining constant in lvb.h thats used into lm.h and removed the unused lvb.[ch]. I have not changed the HIF_ constants. That is left to a later patch which I hope will unify the gh_flags and gh_iflags fields of the struct gfs2_holder. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-30[GFS2] Remove unused code from glock layerSteven Whitehouse
Remove the unused sync feature from glocks. This is currently done by calling the required functions to sync pages/blocks directly so this code isn't needed. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-30[GFS2] Make glock operations constSteven Whitehouse
For all the usual reasons of enforcing correctness and potentially reducing code size, this patch makes the glock operations const. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-25[GFS2] Allow mounting of gfs2 and gfs2meta at the same timeAbhijith Das
This patch allows the simultaneous mounting of gfs2meta and gfs2 filesystems. A restriction however is that a gfs2meta fs may only be mounted if its corresponding gfs2 filesystem is also mounted. Also, a gfs2 filesystem cannot be unmounted before its gfs2meta filesystem. Signed-off-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-24[GFS2] Speed up scanning of glocksSteven Whitehouse
I noticed the gfs2_scand seemed to be taking a lot of CPU, so in order to cut that down a bit, here is a patch. Firstly the type of a glock is a constant during its lifetime, so that its possible to check this without needing locking. I've moved the (common) case of testing for an inode glock outside of the glmutex lock. Also there was a mutex left over from when the glock cache was master of the inode cache. That isn't required any more so I've removed that too. There is probably scope for further speed ups in the future in this area. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-04[GFS2] Fix lock ordering bug in page fault pathSteven Whitehouse
Mmapped files were able to trigger a lock ordering bug. Private maps do not need to take the glock so early on. Shared maps do unfortunately, however we can get around that by adding a flag into the flags for the struct gfs2_file. This only works because we are taking an exclusive lock at this point, so we know that nobody else can be racing with us. Fixes Red Hat bugzilla: #201196 Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-06-22[GFS2] Remove unused flagSteven Whitehouse
The flag GIF_MIN_INIT is no longer used or required. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-06-20[GFS2] Fix use of bitops on unsigned int (struct gfs2_holder->gh_iflags)David Woodhouse
fs/gfs2/glock.c: In function ‘gfs2_holder_get’: fs/gfs2/glock.c:439: warning: passing argument 2 of ‘set_bit’ from incompatible pointer type fs/gfs2/glock.c: In function ‘rq_promote’: fs/gfs2/glock.c:512: warning: passing argument 2 of ‘set_bit’ from incompatible pointer type fs/gfs2/glock.c:526: warning: passing argument 2 of ‘set_bit’ from incompatible pointer type ... Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-14[GFS2] Fix unlinked file handlingSteven Whitehouse
This patch fixes the way we have been dealing with unlinked, but still open files. It removes all limits (other than memory for inodes, as per every other filesystem) on numbers of these which we can support on GFS2. It also means that (like other fs) its the responsibility of the last process to close the file to deallocate the storage, rather than the person who did the unlinking. Note that with GFS2, those two events might take place on different nodes. Also there are a number of other changes: o We use the Linux inode subsystem as it was intended to be used, wrt allocating GFS2 inodes o The Linux inode cache is now the point which we use for local enforcement of only holding one copy of the inode in core at once (previous to this we used the glock layer). o We no longer use the unlinked "special" file. We just ignore it completely. This makes unlinking more efficient. o We now use the 4th block allocation state. The previously unused state is used to track unlinked but still open inodes. o gfs2_inoded is no longer needed o Several fields are now no longer needed (and removed) from the in core struct gfs2_inode o Several fields are no longer needed (and removed) from the in core superblock There are a number of future possible optimisations and clean ups which have been made possible by this patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-06-06[GFS2] Move some fields around to reduce wasted spaceSteven Whitehouse
We can reclaim some space by moving fields in some structures in order to allow them to pack better on 64 bit architectures. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18[GFS2] glock debugging and inode cache changesSteven Whitehouse
This adds some extra debugging to glock.c and changes inode.c's deallocation code to call the debugging code at a suitable moment. I'm chasing down a particular bug to do with deallocation at the moment and the code can go again once the bug is fixed. Also this includes the first part of some changes to unify the Linux struct inode and GFS2's struct gfs2_inode. This transformation will happen in small parts over the next short period. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18[GFS2] Update copyright date to 2006Steven Whitehouse
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-26[GFS2] Don't do recursive locking in glock layerSteven Whitehouse
This patch changes the last user of recursive locking so that it no longer needs this feature and removes it from the glock layer. This makes the glock code a lot simpler and easier to understand. Its also a prerequsite to adding support for the AOP_TRUNCATED_PAGE return code (or at least it is if you don't want your brain to melt in the process) I've left in a couple of checks just in case there is some place else in the code which is still using this feature that I didn't spot yet, but they can probably be removed long term. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-18[GFS2] Use vmalloc() in dir codeSteven Whitehouse
When allocating memory to sort directory entries, use vmalloc() rather than kmalloc() since for larger directories, the required size can easily be graeter than the 128k maximum of kmalloc(). Also adding the first steps towards getting the AOP_TRUNCATED_PAGE return code get in the glock code by flagging all places where we request a glock and we are holding a page lock. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-07[GFS2] Fix a ref count bug and other clean upsSteven Whitehouse
This fixes a ref count bug that sometimes showed up a umount time (causing it to hang) but it otherwise mostly harmless. At the same time there are some clean ups including making the log operations structures const, moving a memory allocation so that its not done in the fast path of checking to see if there is an outstanding transaction related to a particular glock. Removes the sd_log_wrap varaible which was updated, but never actually used anywhere. Updates the gfs2 ioctl() to run without the kernel lock (which it never needed anyway). Removes the "invalidate inodes" loop from GFS2's put_super routine. This is done in kill super anyway so we don't need to do it here. The loop was also bogus in that if there are any inodes "stuck" at this point its a bug and we need to know about it rather than hide it by hanging forever. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-04[GFS2] Finish off ioctl supportSteven Whitehouse
This puts the finishing touches to the ioctl support and also removes a couple of unused fields from GFS2's private per file structure. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-29[GFS2] Update debugging codeSteven Whitehouse
Update the debugging code in trans.c and at the same time improve the debugging code for gfs2_holders. The new code should be pretty fast during the normal case and provide just as much information in case of errors (or more). One small function from glock.c has moved to glock.h as a static inline so that its return address won't get in the way of the debugging. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-29[GFS2] Update locking in log.cSteven Whitehouse
Replace the lock_for_trans()/lock_for_flush() functions with an rwsem. In fact the sd_log_flush_lock becomes an rwsem (the write part of it) and is extended slightly to cover everything that the lock_for_flush() used to cover. The read part of the lock is instead of lock_for_trans(). This corrects the races in the original code and reduces the code size. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-28[GFS2] Further updates to dir and logging codeSteven Whitehouse
This reduces the size of the directory code by about 3k and gets readdir() to use the functions which were introduced in the previous directory code update. Two memory allocations are merged into one. Eliminates zeroing of some buffers which were never used before they were initialised by other data. There is still scope for further improvement in the directory code. On the logging side, a hand created mutex has been replaced by a standard Linux mutex in the log allocation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-01[GFS2] Tidy up mount code.Steven Whitehouse
We no longer lookup ".gfs2_admin" in the root directory in order to find it, but instead use the inode number given in the superblock. Both the root directory and the admin directory are now looked up using the same routine, so the redundant code is removed. Also, there is no longer a reference to the root inode in the GFS2 super block. When required this can be retreived via sb->s_root->d_inode instead. Assuming that we introduce a metadata filesystem type for GFS, then this is a first step towards that goal. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-01[GFS2] Remove uneeded memory allocationSteven Whitehouse
For every filesystem operation where we need a transaction, we now make one less memory allocation. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-27[GFS2] Macros removal in gfs2.hSteven Whitehouse
As suggested by Pekka Enberg <penberg@cs.helsinki.fi>. The DIV_RU macro is renamed DIV_ROUND_UP and and moved to kernel.h The other macros are gone from gfs2.h as (although not requested by Pekka Enberg) are a number of included header file which are now included individually. The inode number comparison function is now an inline function. The DT2IF and IF2DT may be addressed in a future patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-23[GFS2] Patch to remove stats gathering from GFS2David Teigland
Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-21[GFS2] Use mutices rather than semaphoresSteven Whitehouse
As well as a number of minor bug fixes, this patch changes GFS to use mutices rather than semaphores. This results in better information in case there are any locking problems. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-13[GFS2] Fix for root inode ref count bugSteven Whitehouse
Umount is now working correctly again. The bug was due to not getting an extra ref count when mounting the fs. We should have bumped it by two (once for the internal pointer to the root inode from the super block and once for the inode hanging off the dcache entry for root). Also this patch tidys up the code dealing with looking up and creating inodes. We now pass Linux inodes (with gfs2_inodes attached) rather than the other way around and this reduces code duplication in various places. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-30[GFS2] Add gfs2_internal_read()Steven Whitehouse
Add the new external read function. Its temporarily in jdata.c even though the protoype is in ops_file.h - this will change shortly. The current implementation will change to a page cache one when that happens. In order to effect the above changes, the various internal inodes now have Linux inodes attached to them. We keep the references to the Linux inodes, rather than the gfs2_inodes in the super block. In order to get everything to work correctly I've had to reorder the init sequence on mount (which I should probably have done earlier when .gfs2_admin was made visible). Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-18[GFS2] Remove gfs2_databuf in favour of gfs2_bufdata structureSteven Whitehouse
Removing the gfs2_databuf structure and using gfs2_bufdata instead is a step towards allowing journaling of data without requiring the metadata header on each journaled block. The idea is to merge the code paths for ordered data with that of journaled data, with the log operations in lops.c tacking account of the different types of buffers as they are presented to it. Largely the code path for metadata will be similar too, but obviously through a different set of log operations. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16[GFS2] The core of GFS2David Teigland
This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>