aboutsummaryrefslogtreecommitdiff
path: root/fs/gfs2/incore.h
AgeCommit message (Collapse)Author
2008-09-26GFS2: Support for I/O barriersSteven Whitehouse
This patch adds barrier support to GFS2. There is not a lot of change really... we just add the barrier flag when we write journal header blocks. If the underlying device refuses to support them, we fall back to the previous way of doing things (wait for the I/O and hope) since there is nothing else we can do. There is no user configuration, barriers will always be on unless the device refuses to support them. This seems a reasonable solution to me since this is a correctness issue. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-09-18GFS2: high time to take some time over atimeSteven Whitehouse
Until now, we've used the same scheme as GFS1 for atime. This has failed since atime is a per vfsmnt flag, not a per fs flag and as such the "noatime" flag was not getting passed down to the filesystems. This patch removes all the "special casing" around atime updates and we simply use the VFS's atime code. The net result is that GFS2 will now support all the same atime related mount options of any other filesystem on a per-vfsmnt basis. We do lose the "lazy atime" updates, but we gain "relatime". We could add lazy atime to the VFS at a later date, if there is a requirement for that variant still - I suspect relatime will be enough. Also we lose about 100 lines of code after this patch has been applied, and I have a suspicion that it will speed things up a bit, even when atime is "on". So it seems like a nice clean up as well. From a user perspective, everything stays the same except the loss of the per-fs atime quantum tweekable (ought to be per-vfsmnt at the very least, and to be honest I don't think anybody ever used it) and that a number of options which were ignored before now work correctly. Please let me know if you've got any comments. I'm pushing this out early so that you can all see what my plans are. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-09-18GFS2: The war on bloatSteven Whitehouse
The following patch shrinks the gfs2_args structure which is embedded in every GFS2 superblock. It cuts down the size of the options to a single unsigned int (the 13 bits of bitfields will be rounded up to that size by the compiler) from the current 11 unsigned ints. So on x86 thats 44 bytes shrinking to 4 bytes, in each and every GFS2 superblock. Signed-off-by: Steven Whitehouse <swhitho@redhat.com>
2008-08-13GFS2: Fix metafs mountsSteven Whitehouse
This patch is intended to fix the issues reported in bz #457798. Instead of having the metafs as a separate filesystem, it becomes a second root of gfs2. As a result it will appear as type gfs2 in /proc/mounts, but it is still possible (for backwards compatibility purposes) to mount it as type gfs2meta. A new mount flag "meta" is introduced so that its possible to tell the two cases apart in /proc/mounts. As a result it becomes possible to mount type gfs2 with -o meta and get the same result as mounting type gfs2meta. So it is possible to mount just the metafs on its own. Currently if you do this, its then impossible to mount the "normal" root of the gfs2 filesystem without first unmounting the metafs root. I'm not sure if thats a feature or a bug :-) Either way, this is a great improvement on the previous scheme and I've verified that it works ok with bind mounts on both the "normal" root and the metafs root in various combinations. There were also a bunch of functions in super.c which didn't belong there, so this moves them into ops_fstype.c where they can be static. Hopefully the mount/umount sequence is now more obvious as a result. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com>
2008-07-10[GFS2] Remove support for unused and pointless flagSteven Whitehouse
The ability to mark files for direct i/o access when opened normally is both unused and pointless, so this patch removes support for that feature. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-07-10[GFS2] Replace rgrp "recent list" with mru listSteven Whitehouse
This patch removes the "recent list" which is used during allocation and replaces it with the (already existing) mru list used during deletion. The "recent list" was not a true mru list leading to a number of inefficiencies including a "next" function which made scanning the list an order N^2 operation wrt to the number of list elements. This should increase allocation performance with large numbers of rgrps. Its also a useful preparation and cleanup before some further changes which are planned in this area. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-06-27[GFS2] Clean up the glock coreSteven Whitehouse
This patch implements a number of cleanups to the core of the GFS2 glock code. As a result a lot of code is removed. It looks like a really big change, but actually a large part of this patch is either removing or moving existing code. There are some new bits too though, such as the new run_queue() function which is considerably streamlined. Highlights of this patch include: o Fixes a cluster coherency bug during SH -> EX lock conversions o Removes the "glmutex" code in favour of a single bit lock o Removes the ->go_xmote_bh() for inodes since it was duplicating ->go_lock() o We now only use the ->lm_lock() function for both locks and unlocks (i.e. unlock is a lock with target mode LM_ST_UNLOCKED) o The fast path is considerably shortly, giving performance gains especially with lock_nolock o The glock_workqueue is now used for all the callbacks from the DLM which allows us to simplify the lock_dlm module (see following patch) o The way is now open to make further changes such as eliminating the two threads (gfs2_glockd and gfs2_scand) in favour of a more efficient scheme. This patch has undergone extensive testing with various test suites so it should be pretty stable by now. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Bob Peterson <rpeterso@redhat.com>
2008-05-12[GFS2] filesystem consistency error from do_stripBob Peterson
This patch fixes a GFS2 filesystem consistency error reported from function do_strip. The problem was caused by a timing window that allowed two vfs inodes to be created in memory that point to the same file. The problem is fixed by making the vfs's iget_test, iget_set mechanism check and set a new bit in the in-core gfs2_inode structure while the vfs inode spin_lock is held. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Invalidate cache at correct pointBenjamin Marzinski
GFS2 wasn't invalidating its cache before it called into the lock manager with a request that could potentially drop a lock. This was leaving a window where the lock could be actually be held by another node, but the file's page cache would still appear valid, causing coherency problems. This patch moves the cache invalidation to before the lock manager call when dropping a lock. It also adds the option to the lock_dlm lock manager to not use conversion mode deadlock avoidance, which, on a conversion from shared to exclusive, could internally drop the lock, and then reacquire in. GFS2 now asks lock_dlm to not do this. Instead, GFS2 manually drops the lock and reacquires it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Eliminate (almost) duplicate field from gfs2_inodeSteven Whitehouse
The blocks counter is almost a duplicate of the i_blocks field in the VFS inode. The only difference is that i_blocks can be only 32bits long for 32bit arch without large single file support. Since GFS2 doesn't handle the non-large single file case (for 32 bit anyway) this adds a new config dependency on 64BIT || LSF. This has always been the case, however we've never explicitly said so before. Even if we do add support for the non-LSF case, we will still not require this field to be duplicated since we will not be able to access oversized files anyway. So the net result of all this is that we shave 8 bytes from a gfs2_inode and get our config deps correct. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Merge the rd_last_alloc_meta and rd_last_alloc_data fieldsSteven Whitehouse
We don't need to keep track of when we last allocated data and metadata separately since the only thing thats important when searching for a free block is whether its free or not, which is independent from what type of block it is. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Reduce inode size by merging fieldsSteven Whitehouse
There were three fields being used to keep track of the location of the most recently allocated block for each inode. These have been merged into a single field in order to better keep the data and metadata for an inode close on disk, and also to reduce the space required for storage. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Remove unused countersBob Peterson
This is kind of trivial in the greater scheme of things, but this removes three counters that AFAICT are never used. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Shrink & rename di_depthSteven Whitehouse
This patch forms a pair with the previous patch which shrunk di_height. Like that patch di_depth is renamed i_depth and moved into struct gfs2_inode directly. Also the field goes from 16 bits to 8 bits since it is also limited to a max value which is rather small (17 in this case). In addition we also now validate the field against this maximum value when its read in. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Remove rgrp and glock version numbersBob Peterson
This patch further reduces GFS2's memory requirements by eliminating the 64-bit version number fields in lieu of a couple bits. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Remove lm.[ch] and distribute contentSteven Whitehouse
The functions in lm.c were just wrappers which were mostly only used in one other file. By moving the functions to the files where they are being used, they can be marked static and also this will usually result in them being inlined since they are often only used from one point in the code. A couple of really trivial functions have been inlined by hand into the function which called them as it makes the code clearer to do that. We also gain from one fewer function call in the glock lock and unlock paths. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Eliminate gl_req_bhBob Peterson
This patch further reduces the memory needs of GFS2 by eliminating the gl_req_bh variable from struct gfs2_glock. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Get rid of gl_waiters2Bob Peterson
This patch reduces memory by replacing the int variable gl_waiters2 by a single bit in the gl_flags. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Combine rg_flags and rd_flagsBob Peterson
This patch reduces the memory required by GFS2 by combining the rd_flags and rg_flags (in core only). Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Only do lo_incore_commit onceBob Peterson
This patch is performance related. When we're doing a log flush, I noticed we were calling buf_lo_incore_commit twice: once for data bufs and once for metadata bufs. Since this is the same function and does the same thing in both cases, there should be no reason to call it twice. Since we only need to call it once, we can also make it faster by removing it from the generic "lops" code and making it a stand-along static function. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Streamline indirect pointer tree height calculationSteven Whitehouse
This patch improves the calculation of the tree height in order to reduce the number of operations which are carried out on each call to gfs2_block_map. In the common case, we now make a single comparison, rather than calculating the required tree height from scratch each time. Also in the case that the tree does need some extra height, we start from the current height rather from zero when we work out what the new height ought to be. In addition the di_height field is moved into the inode proper and reduced in size to a u8 since the value must be between 0 and GFS2_MAX_META_HEIGHT (10). Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-02-07gfs2: make gfs2_glock.gl_owner_pid be a struct pid *Pavel Emelyanov
The gl_owner_pid field is used to get the lock owning task by its pid, so make it in a proper manner, i.e. by using the struct pid pointer and pid_task() function. The pid_task() becomes exported for the gfs2 module. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07gfs2: make gfs2_holder.gh_owner_pid be a struct pid *Pavel Emelyanov
The gl_owner_pid field is used to get the holder task by its pid and check whether the current is a holder, so make it in a proper manner, i.e. via the struct pid * manipulations. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-25[GFS2] Remove unneeded i_spinBob Peterson
This patch removes a vestigial variable "i_spin" from the gfs2_inode structure. This not only saves us memory (>300000 of these in memory for the oom test) it also saves us time because we don't have to spend time initializing it (i.e. slightly better performance). Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Reduce inode size by moving i_alloc out of lineSteven Whitehouse
It is possible to reduce the size of GFS2 inodes by taking the i_alloc structure out of the gfs2_inode. This patch allocates the i_alloc structure whenever its needed, and frees it afterward. This decreases the amount of low memory we use at the expense of requiring a memory allocation for each page or partial page that we write. A quick test with postmark shows that the overhead is not measurable and I also note that OCFS2 use the same approach. In the future I'd like to solve the problem by shrinking down the size of the members of the i_alloc structure, but for now, this reduces the immediate problem of using too much low-memory on x86 and doesn't add too much overhead. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove unused variableSteven Whitehouse
The go_drop_th function is never called or referenced. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Eliminate the no longer needed sd_statfs_mutexBob Peterson
This patch eliminates the unneeded sd_statfs_mutex mutex but preserves the ordering as discussed. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Journal extent mappingBob Peterson
This patch saves a little time when gfs2 writes to the journals by keeping a mapping between logical and physical blocks on disk. That's better than constantly looking up indirect pointers in buffers, when the journals are several levels of indirection (which they typically are). Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Don't periodically update the jindexSteven Whitehouse
We only care about the content of the jindex in two cases, one is when we mount the fs and the other is when we need to recover another journal. In both cases we have to update the jindex anyway, so there is no point in updating it periodically between times, so this removes it to simplify gfs2_logd. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Use atomic_t for journal free blocks counterSteven Whitehouse
This patch changes the counter which keeps track of the free blocks in the journal to an atomic_t in preparation for the following patch which will update the log reservation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Don't add glocks to the journalSteven Whitehouse
The only reason for adding glocks to the journal was to keep track of which locks required a log flush prior to release. We add a flag to the glock to allow this check to be made in a simpler way. This reduces the size of a glock (by 12 bytes on i386, 24 on x86_64) and means that we can avoid extra work during the journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove flags no longer requiredSteven Whitehouse
The HIF_MUTEX and HIF_PROMOTE flags were set on the glock holders depending upon which of the two waiters lists they were going to be queued upon. They were then tested when the holders were taken off the lists to ensure that the right type of holder was being dequeued. Since we are already using separate lists, there doesn't seem a lot of point having these flags as well, and since setting them and testing them is in the fast path for locking and unlocking glock, this patch removes them. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove "reclaim limit"Steven Whitehouse
This call to reclaim glocks is not needed, and in particular we don't want it in the fast path for locking glocks. The limit was entirely arbitrary anyway and we can't expect users to adjust things like this, the remaining code will do the right thing on its own. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove unused variablesSteven Whitehouse
These haven't been used for some time, remove them. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Add gfs2_is_writeback()Steven Whitehouse
This adds a function "gfs2_is_writeback()" along the lines of the existing "gfs2_is_jdata()" in order to clean up the code and make the various tests for the inode mode more obvious. It also fixes the PageChecked() logic where we were resetting the flag too early in the case of an error path. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove unused field in struct gfs2_inodeSteven Whitehouse
Removes a field that is not used. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove useless i_cache from inodesSteven Whitehouse
The i_cache was designed to keep references to the indirect blocks used during block mapping so that they didn't have to be looked up continually. The idea failed because there are too many places where the i_cache needs to be freed, and this has in the past been the cause of many bugs. In addition there was no performance benefit being gained since the disk blocks in question were cached anyway. So this patch removes it in order to simplify the code to prepare for other changes which would otherwise have had to add further support for this feature. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Use ->page_mkwrite() for mmap()Steven Whitehouse
This cleans up the mmap() code path for GFS2 by implementing the page_mkwrite function for GFS2. We are thus able to use the generic filemap_fault function for our ->fault() implementation. This now means that shared writable mappings will be much more efficiently shared across the cluster if there is a reasonable proportion of read activity (the greater proportion, the better). As a side effect, it also reduces the size of the code, removes special cases from readpage and readpages, and makes the code path easier to follow. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Handle multiple glock demote requestsWendy Cheng
Fix a race condition where multiple glock demote requests are sent to a node back-to-back. This patch does a check inside handle_callback() to see whether a demote request is in progress. If true, it sets a flag to make sure run_queue() will loop again to handle the new request, instead of erronously setting gl_demote_state to a different state. Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] Clean up journaled data writingSteven Whitehouse
This patch cleans up the code for writing journaled data into the log. It also removes the need to allocate a small "tag" structure for each block written into the log. Instead we just keep count of the outstanding I/O so that we can be sure that its all been written at the correct time. Another result of this patch is that a number of ll_rw_block() calls have become submit_bh() calls, closing some races at the same time. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] Replace revoke structure with bufdata structureSteven Whitehouse
Both the revoke structure and the bufdata structure are quite similar. They are basically small tags which are put on lists. In addition to which the revoke structure is always allocated when there is a bufdata structure which is (or can be) freed. As such it should be possible to reduce the number of frees and allocations by using the same structure for both purposes. This patch is the first step along that path. It replaces existing uses of the revoke structure with the bufdata structure. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] Clean up ordered write codeSteven Whitehouse
The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] delay glock demote for a minimum hold timeBenjamin Marzinski
When a lot of IO, with some distributed mmap IO, is run on a GFS2 filesystem in a cluster, it will deadlock. The reason is that do_no_page() will repeatedly call gfs2_sharewrite_nopage(), because each node keeps giving up the glock too early, and is forced to call unmap_mapping_range(). This bumps the mapping->truncate_count sequence count, forcing do_no_page() to retry. This patch institutes a minimum glock hold time a tenth a second. This insures that even in heavy contention cases, the node has enough time to get some useful work done before it gives up the glock. A second issue is that when gfs2_glock_dq() is called from within a page fault to demote a lock, and the associated page needs to be written out, it will try to acqire a lock on it, but it has already been locked at a higher level. This patch puts makes gfs2_glock_dq() use the work queue as well, to avoid this issue. This is the same patch as Steve Whitehouse originally proposed to fix this issue, execpt that gfs2_glock_dq() now grabs a reference to the glock before it queues up the work on it. Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] Reduce number of gfs2_scand processes to oneSteven Whitehouse
We only need a single gfs2_scand process rather than the one per filesystem which we had previously. As a result the parameter determining the frequency of gfs2_scand runs becomes a module parameter rather than a mount parameter as it was before. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] assertion failure after writing to journaled file, umountRobert Peterson
This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Recovery for lost unlinked inodesSteven Whitehouse
Under certain circumstances its possible (though rather unlikely) that inodes which were unlinked by one node while still open on another might get "lost" in the sense that they don't get deallocated if the node which held the inode open crashed before it was unlinked. This patch adds the recovery code which allows automatic deallocation of the inode if its found during block allocation (the sensible time to look for such inodes since we are scanning the rgrp's bitmaps anyway at this time, so it adds no overhead to do this). Since the inode will have had its i_nlink set to zero, all we need to trigger recovery is a lookup and an iput(), and the normal deallocation code takes care of the rest. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Fix sign problem in quota/statfs and cleanup _host structuresSteven Whitehouse
This patch fixes some sign issues which were accidentally introduced into the quota & statfs code during the endianess annotation process. Also included is a general clean up which moves all of the _host structures out of gfs2_ondisk.h (where they should not have been to start with) and into the places where they are actually used (often only one place). Also those _host structures which are not required any more are removed entirely (which is the eventual plan for all of them). The conversion routines from ondisk.c are also moved into the places where they are actually used, which for almost every one, was just one single place, so all those are now static functions. This also cleans up the end of gfs2_ondisk.h which no longer needs the #ifdef __KERNEL__. The net result is a reduction of about 100 lines of code, many functions now marked static plus the bug fixes as mentioned above. For good measure I ran the code through sparse after making these changes to check that there are no warnings generated. This fixes Red Hat bz #239686 Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Quotas non-functional - fix bugAbhijith Das
This patch fixes an error in the quota code where a 'struct gfs2_quota_lvb*' was being passed to gfs2_adjust_quota() instead of a 'struct gfs2_quota_data*'. Also moved 'struct gfs2_quota_lvb' from fs/gfs2/incore.h to include/linux/gfs2_ondisk.h as per Steve's suggestion. Signed-off-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Clean up inode number handlingSteven Whitehouse
This patch cleans up the inode number handling code. The main difference is that instead of looking up the inodes using a struct gfs2_inum_host we now use just the no_addr member of this structure. The tests relating to no_formal_ino can then be done by the calling code. This has advantages in that we want to do different things in different code paths if the no_formal_ino doesn't match. In the NFS patch we want to return -ESTALE, but in the ->lookup() path, its a bug in the fs if the no_formal_ino doesn't match and thus we can withdraw in this case. In order to later fix bz #201012, we need to be able to look up an inode without knowing no_formal_ino, as the only information that is known to us is the on-disk location of the inode in question. This patch will also help us to fix bz #236099 at a later date by cleaning up a lot of the code in that area. There are no user visible changes as a result of this patch and there are no changes to the on-disk format either. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01[GFS2] lockdump improvementsRobert Peterson
The patch below consists of the following changes (in code order): 1. I fixed a minor compiler warning regarding the printing of a kernel symbol address. 2. I implemented a suggestion from Dave Teigland that moves the debugfs information for gfs2 into a subdirectory so we can easily expand our use of debugfs in the future. The current code keeps the glock information in: /debug/gfs2/<fs> With the patch, the new code keeps the glock information in: /debug/gfs2/<fs>/glock That will allow us to create more debugfs files in the future. 3. This fixes a bug whereby a failed mount attempt causes the debugfs file to not be deleted. Failed mount attempts should always clean up after themselves, including deleting the debugfs file and/or directory. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>