| Age | Commit message (Collapse) | Author |
|---|
|
"!ip->i_inode.i_mapping->nrpages" failed
The following removes an incorrect assertion from the GFS2 glops code. This
fixes Red Hat bz 229873. Thanks to Abhijith Das for testing the patch
and confirming the fix.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
|
|
fs/gfs2/glock.c:2198: error: 'THIS_MODULE' undeclared here (not in a function)
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The ->go_drop_bh function is never used, so this removes it and the single
caller,
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Remove an unused variable.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The following patch fixes Red Hat bz 229831. Without this patch its
possible for the wrong inode to be returned in certain cases. It is a
pretty unusual event, so that its taken some time to track down. Thanks
and due to Josef Whiter who did a lot of the testing required to thrack
this down and fix it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The below patch fixes a problem where we were not flushing rgrps
correctly. It only occurred in the specific case that a callback was
received for an rgrp which was dirty and when a journal log flush had
not already resulted in the rgrp being flushed anyway. This fixes Red
Hat bz 230143,
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
ok, the following is the minimum changes to get NFSD going before we
settle down this issue .. would appreciate this in the tree so other NFS
related works can get done in parallel.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This fixes a problem I encountered while running bonnie++. When you have one
thread that opens a file and starts to write to it, and then another thread that
tries to open and write to the same file, the second thread will loop forever
trying to grab the inode lock for that inode. Basically we come in through
generic_buffered_file_write, which calls gfs2_prepare_write, which then attempts
to grab the glock. Because we don't own the lock, gfs2_prepare_write gets
GLR_TRYFAILED, which returns AOP_TRUNCATED_PAGE to generic_buffered_file_write.
At this point generic_buffered_file_write loops around again and immediately
retries the prepare_write. This means that the second process never gets off of
the processor in order to allow the process that holds the lock to finish its
work and let go of the lock. This patch makes gfs2_glock_nq schedule() if it
gets back a GLR_TRYFAILED, which resolves this problem.
Signed-off-by: Josef Whiter <jwhiter@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
File handle checking error found in '07 NFS connectathon. The fh_type
and fh_len are not necessarily identical. Some of the client machines
could fail mount with stale filehandle without this patch.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Patch for the 2.6.20 stable tree that adds a missing newline to one of
the printk messages in fs/gfs2/ops_fstype.c.
Signed-off-by: Richard Fearn <richardfearn@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch fixes a locking mistake in the quota code, we do a mutex_lock instead
of a mutex_unlock.
Signed-off-by: Josef Whiter <jwhiter@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there. Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.
To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.
Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm. I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).
Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch is inspired by Arjan's "Patch series to mark struct
file_operations and struct inode_operations const".
Compile tested with gcc & sparse.
Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Many struct inode_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Many struct file_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Replace appropriate pairs of "kmem_cache_alloc()" + "memset(0)" with the
corresponding "kmem_cache_zalloc()" call.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Roland McGrath <roland@redhat.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Acked-by: Joel Becker <Joel.Becker@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On Mon, Jan 29, 2007 at 08:45:28PM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.20-rc6-mm2:
>...
> git-gfs2-nmw.patch
>...
> git trees
>...
This patch makes the needlessly global gfs2_writepages() static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
When the try lock of the glock failed in prepare_write we were
incorrectly exiting this function with the page still locked.
This was resulting in further I/O to this page hanging.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Glock assertion failure found in '07 NFS connectathon. One of the NFSDs
is doing a "readdirplus" procedure call. It passes the logic into
gfs2_readdir() where it obtains its directory inode glock. This is then
followed by filehandle construction that invokes lookup code. It hits
the assertion failure while trying to obtain the inode glock again
inside gfs2_drevalidate().
This patch bypasses the recursive glock call if caller already holds the
lock.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Indent help text as expected.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Move the glock acquisition to outside of the transactions.
Lock odering must be preserved in order to prevent ABBA
deadlocks. The current gfs2_change_nlink code would tries
to grab the glock after having started a transaction and thus is holding
the log lock. This is inconsistent with other code paths in
gfs that grab the resource group glock prior to staring
a tranactions.
One problem with this fix is that the resource group
lock is always grabbed now even if the inode still has
ref count and can not be marked for unlink.
Signed-off-by: Russell Cattelan <cattelan@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Dave Teigland fixed this bug a while back, but I managed to mistakenly
remove the semaphore during later development. It is required to avoid
the list of inodes changing during an invalidate_inodes call. I have
made it an rwsem since the read side will be taken frequently during
normal filesystem operation. The write site will only happen during
umount of the file system.
Also the bug only triggers when using the DLM lock manager and only then
under certain conditions as its timing related.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: David Teigland <teigland@redhat.com>
|
|
Whoops, quilt user error, missed this one in the previous patch.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
On Sun, Jan 28, 2007 at 11:08:18AM +0100, Jiri Slaby wrote:
> Andrew Morton napsal(a):
> >Temporarily at
> >
> > http://userweb.kernel.org/~akpm/2.6.20-rc6-mm1/
>
> Unable to select IPV6. Menuconfig doesn't offer it when INET is selected.
> When it's not it appears in the menu, but after state change it gets away.
> The same behaviour in xconfig, gconfig.
>
> $ mkdir ../a/tst
> $ make O=../a/tst menuconfig
> HOSTCC scripts/basic/fixdep
> [...]
> HOSTLD scripts/kconfig/mconf
> scripts/kconfig/mconf arch/i386/Kconfig
> Warning! Found recursive dependency: INET GFS2_FS_LOCKING_DLM SYSFS
> OCFS2_FS INET
>
> Maybe this is the problem?
Yes, patch below.
> regards,
cu
Adrian
<-- snip -->
This patch fixes a circular dependency by letting GFS2_FS_LOCKING_DLM
and DLM depend on instead of select SYSFS.
Since SYSFS depends on EMBEDDED this change shouldn't cause any problems
for users.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
With CONFIG_DLM=m, CONFIG_PROC_FS=n, and CONFIG_SYSFS=n, kernel build
fails with:
WARNING: "kernel_subsys" [fs/gfs2/locking/dlm/lock_dlm.ko] undefined!
WARNING: "kernel_subsys" [fs/dlm/dlm.ko] undefined!
WARNING: "kernel_subsys" [fs/configfs/configfs.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
Since fs/dlm/lockspace.c and fs/gfs2/locking/dlm/sysfs.c use
kernel_subsys, they should either DEPEND on it or SELECT it.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
We want to be able to change or disable the default drop_count (number at
which the dlm asks gfs to limit the the number of locks it's holding).
Add it to the collection of sysfs tunables for an fs.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Increase the number of locks at which point the dlm begins asking gfs to
reduce its lock usage. The default value is largely arbitrary, but the
current value of 50,000 ends up limiting performance unnecessarily for too
many users.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The patch below appears to fix the list corruption that we are seeing on
occasion. Although the transaction structure is private to a single
thread, when the queued structures are dismantled during an in-core
commit, its possible for a different thread to be trying to add the same
structure to another, new, transaction at the same time.
To avoid this, this patch takes the log spinlock during this operation.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
In certain cases, its possible for NFS to call the lookup code while
holding the glock (when doing a readdirplus operation) so we need to
check for that and not try and lock the glock twice. This also fixes a
typo in a previous NFS related GFS2 patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This is a one letter typo fix in glock.c, spotted by Rob Kenna.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
I was looking something else up and came across this...
I don't honestly have a good reason to change it other than to make it
like every other Linux filesystem in this regard. ;-) It doesn't
functionally change anything, but makes some lines shorter. :)
I'm also curious; why does gfs2 have 64-bits of on-disk timestamps, but
not in timespec_t format, and only stores second resolutions? Seems like
you're halfway to sub-second resolutions already.
I suppose if that gets implemented then all of the below should
instead be CURRENT_TIME not CURRENT_TIME_SEC.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This one liner got missed from the previous patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This function is not longer required since we do not do recursive
locking in the glock layer. As a result all its callers can be
replaceed with list_empty() calls.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch doesn't make any changes to the ordering of the various
operations related to glocking, but it does tidy up the calls to the
glops.c functions to make the structure more obvious.
The two functions: gfs2_glock_xmote_th() and gfs2_glock_drop_th() can be
made static within glock.c since they are called by every set of glock
operations. The xmote_th and drop_th glock operations are then made
conditional upon those two routines existing and called from the
previously mentioned functions in glock.c respectively.
Also it can be seen that the go_sync operation isn't needed since it can
easily be replaced by calls to xmote_bh and drop_bh respectively. This
results in no longer (confusingly) calling back into routines in glock.c
from glops.c and also reducing the glock operations by one member.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Here is a patch for GFS2 to remove the local exclusive flag. In
the places it was used, mutex's are always held earlier in the
call path, so it appears redundant in the LM_ST_SHARED case.
Also, the GFS2 holders were setting local exclusive in any case where
the requested lock was LM_ST_EXCLUSIVE. So the other places in the glock
code where the flag was tested have been replaced with tests for the
lock state being LM_ST_EXCLUSIVE in order to ensure the logic is the
same as before (i.e. LM_ST_EXCLUSIVE is always locally exclusive as well
as globally exclusive).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This is never used, so we might as well remove it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The "greedy" code was an attempt to retain glocks for a minimum length
of time when they relate to mmap()ed files. The current implementation
of this feature is not, however, ideal in that it required allocating
memory in order to do this and its overly complicated.
It also misses the mark by ignoring the other I/O operations which are
just as likely to suffer from the same problem. So the plan is to remove
this now and then add the functionality back as part of the glock state
machine at a later date (and thus take into account all the possible
users of this feature)
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Here is something I spotted (while looking for something entirely
different) the other day.
Rather than using a completion in each and every struct gfs2_holder,
this removes it in favour of hashed wait queues, thus saving a
considerable amount of memory both on the stack (where a number of
gfs2_holder structures are allocated) and in particular in the
gfs2_inode which has 8 gfs2_holder structures embedded within it.
As a result on x86_64 the gfs2_inode shrinks from 2488 bytes to
1912 bytes, a saving of 576 bytes per inode (no thats not a typo!).
In actual practice we get a much better result than that since
now that a gfs2_inode is under the 2048 byte barrier, we get two
per 4k slab page effectively halving the amount of memory required
to store gfs2_inodes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This removes an unused sysfs tunable parameter.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This removes the extra filldir callback which gfs2 was using to
enclose an attempt at readahead for inodes during readdir. The
code was too complicated and also hurts performance badly in the
case that the getdents64/readdir call isn't being followed by
stat() and it wasn't even getting it right all the time when it
was.
As a result, on my test box an "ls" of a directory containing 250000
files fell from about 7mins (freshly mounted, so nothing cached) to
between about 15 to 25 seconds. When the directory content was cached,
the time taken fell from about 3mins to about 4 or 5 seconds.
Interestingly in the cached case, running "ls -l" once reduced the time
taken for subsequent runs of "ls" to about 6 secs even without this
patch. Now it turns out that there was a special case of glocks being
used for prefetching the metadata, but because of the timeouts for these
locks (set to 10 secs) the metadata was being timed out before it was
being used and this the prefetch code was constantly trying to prefetch
the same data over and over.
Calling "ls -l" meant that the inodes were brought into memory and once
the inodes are cached, the glocks are not disposed of until the inodes
are pushed out of the cache, thus extending the lifetime of the glocks,
and thus bringing down the time for subsequent runs of "ls"
considerably.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
It occurred to me that although a gfs2 specific writepages for ordered
writes and journaled data would be tricky, by hooking writepages only
for "data=writeback" mounts we could take advantage of not needing
buffer heads (we don't use them on the read side, nor have we for some
time) and create much larger I/Os for the block layer.
Using blktrace both before and after, its possible to see that for large
I/Os, most of the requests generated through writepages are now 1024
sectors after this patch is applied as opposed to 8 sectors before.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
On Thu, Jan 11, 2007 at 10:26:27PM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.20-rc3-mm1:
>...
> git-gfs2-nmw.patch
>...
> git trees
>...
This patch makes the needlessly globlal gfs2_change_nlink_i() static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This is for Red Hat bugzilla bug bz #222302:
Moving a virtual IP from node to node between two NFS-over-GFS2
servers was causing one of the GFS2 servers to become confused and
reference a deleted inode. The problem was due to vfs dentries that did
not reference the gfs2_dops and therefore didn't call the gfs2 revalidate
code to revalidate a dentry after a directory had been deleted & recreated.
This patch is a crosswrite from a RHEL4 bug found in GFS1 as
bz #190756 and it is against the latest -nmw git tree.
Signed-off-by: Robert Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Second round of gfs2_rename lock re-ordering to allow Anaconda adding
root partition on top of gfs2. Previous to this patch the recursive
lock detector in glock.c can be triggered due to attempting to lock
the rgrp twice. This fixes it by checking to see whether the rgrp
is already locked.
This fixes Red Hat bugzilla #221237
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Update the quilt header comments to match the
code changes.
Change gfs2_lookup_simple to return an error in the case
of a NULL inode.
The callers of gfs2_lookup_simple do not check for NULL
in the no entry case and such would end up dereferencing a NULL ptr.
This fixes:
http://projects.info-pull.com/mokb/MOKB-15-11-2006.html
Signed-off-by: Russell Cattelan <cattelan@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
In case of unlinked files with dirty pages GFS2 wasn't clearing
the pages in quite the right order. This patch clears the pages
earlier (before the qlock_dq) to avoid the situation that the
release of the glock results in attempting to write back data that
has already been deallocated.
This fixes Red Hat bugzilla: #220117
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Bugzilla 215088
Fix deadlock in gfs2_change_nlink() while installing RHEL5 into GFS2
partition. The gfs2_rename() apparently needs block allocation for the
new name (into the directory) where it requires rg locks. At the same
time, while updating the nlink count for the replaced file,
gfs2_change_nlink() tries to return the inode meta-data back to resource
group where it needs rg locks too. Our logic doesn't allow process to
acquire these locks recursively by the same process (RHEL installer)
that results a BUG call. This only happens within rename code path and
only if the destination file exists before the rename operation.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This is partially derrived from a patch written by Russell Cattelan.
It fixes a bug where there is a race between readpages and truncate
by ignoring readpages for stuffed files. This is ok because a stuffed
file will never be more than one block (minus sizeof(struct gfs2_dinode))
in size and block size is always less than page size, so we do not lose
anything efficiency-wise by not doing readahead for stuffed files. They
will have already been "read ahead" by the action of reading the inode
in, in the first place.
This is the remaining part of the fix for Red Hat bugzilla #218966
which had not yet made it upstream.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Russell Cattelan <cattelan@redhat.com>
|
|
This patch fixes Red Hat bugzilla #212627 in which a deadlock occurs
due to trying to take the i_mutex while holding a glock. The correct
locking order is defined as i_mutex -> glock in all cases.
I've left dealing with allocating writes. I know that we need to do
that, but for now this should do the trick. We don't need to take the
i_mutex on write, because the VFS has already taken it for us. On read
we don't need it since the glock is enough protection. The reason that
I've made some of the checks into a separate function is that we'll need
to do the checks again in the allocating write case eventually, so this
is partly in preparation for this. Likewise the return value test of !=
1 might look a bit odd and thats because we'll need a third return value
in case of requiring an allocation.
I've made the change to deferred mode on the glock to ensure flushing
read caches on other nodes. I notice that (using blktrace to look at
whats going on) we appear to do a better job of large I/Os than ext3
after this patch (in terms of not splitting up the I/Os).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Wendy Cheng <wcheng@redhat.com>
|
|
If an fs has already been shut down, a lockfs callback should do nothing.
An fs that's been shut down can't acquire locks or do anything with
respect to the cluster.
Also, remove FIXME comment in withdraw function. The missing bits of the
withdraw procedure are now all done by user space.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
