aboutsummaryrefslogtreecommitdiff
path: root/fs/jbd
AgeCommit message (Collapse)Author
2009-04-24Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Fix potential inode allocation soft lockup in Orlov allocator ext4: Make the extent validity check more paranoid jbd: use SWRITE_SYNC_PLUG when writing synchronous revoke records jbd2: use SWRITE_SYNC_PLUG when writing synchronous revoke records ext4: really print the find_group_flex fallback warning only once
2009-04-14jbd: use SWRITE_SYNC_PLUG when writing synchronous revoke recordsTheodore Ts'o
The revoke records must be written using the same way as the rest of the blocks during the commit process; that is, either marked as synchronous writes or as asynchornous writes. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-04-13jbd: update locking comentsJan Kara
Update information about locking in JBD revoke code. Reported-by: Lin Tan <tammy000@gmail.com>. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06jbd: use WRITE_SYNC_PLUG instead of WRITE_SYNCJens Axboe
When you are going to be submitting several sync writes, we want to give the IO scheduler a chance to merge some of them. Instead of using the implicitly unplugging WRITE_SYNC variant, use WRITE_SYNC_PLUG and rely on sync_buffer() doing the unplug when someone does a wait_on_buffer()/lock_buffer(). Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03Merge branch 'ext3-latency-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'ext3-latency-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext3: Add replace-on-rename hueristics for data=writeback mode ext3: Add replace-on-truncate hueristics for data=writeback mode ext3: Use WRITE_SYNC for commits which are caused by fsync() block_write_full_page: Use synchronous writes for WBC_SYNC_ALL writebacks
2009-04-02jbd: fix oops in jbd_journal_init_inode() on corrupted fsJan Kara
On 32-bit system with CONFIG_LBD getblk can fail because provided block number is too big. Make JBD gracefully handle that. Signed-off-by: Jan Kara <jack@suse.cz> Cc: <dmaciejak@fortinet.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-27ext3: Use WRITE_SYNC for commits which are caused by fsync()Theodore Ts'o
If a commit is triggered by fsync(), set a flag indicating the journal blocks associated with the transaction should be flushed out using WRITE_SYNC. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Acked-by: Jan Kara <jack@suse.cz>
2009-02-11jbd: fix return value of journal_start_commit()Jan Kara
journal_start_commit() returns 1 if either a transaction is committing or the function has queued a transaction commit. But it returns 0 if we raced with somebody queueing the transaction commit as well. This resulted in ext3_sync_fs() not functioning correctly (description from Arthur Jones): In the case of a data=ordered umount with pending long symlinks which are delayed due to a long list of other I/O on the backing block device, this causes the buffer associated with the long symlinks to not be moved to the inode dirty list in the second phase of fsync_super. Then, before they can be dirtied again, kjournald exits, seeing the UMOUNT flag and the dirty pages are never written to the backing block device, causing long symlink corruption and exposing new or previously freed block data to userspace. This can be reproduced with a script created by Eric Sandeen <sandeen@redhat.com>: #!/bin/bash umount /mnt/test2 mount /dev/sdb4 /mnt/test2 rm -f /mnt/test2/* dd if=/dev/zero of=/mnt/test2/bigfile bs=1M count=512 touch /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename ln -s /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename /mnt/test2/link umount /mnt/test2 mount /dev/sdb4 /mnt/test2 ls /mnt/test2/ This patch fixes journal_start_commit() to always return 1 when there's a transaction committing or queued for commit. Cc: Eric Sandeen <sandeen@redhat.com> Cc: Mike Snitzer <snitzer@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08jbd: remove excess kernel-doc notationRandy Dunlap
Remove excess kernel-doc from fs/jbd/transaction.c: Warning(linux-2.6.28-git5//fs/jbd/transaction.c:764): Excess function parameter 'credits' description in 'journal_get_write_access' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08jbd: improve fsync batchingJosef Bacik
There is a flaw with the way jbd handles fsync batching. If we fsync() a file and we were not the last person to run fsync() on this fs then we automatically sleep for 1 jiffie in order to wait for new writers to join into the transaction before forcing the commit. The problem with this is that with really fast storage (ie a Clariion) the time it takes to commit a transaction to disk is way faster than 1 jiffie in most cases, so sleeping means waiting longer with nothing to do than if we just committed the transaction and kept going. Ric Wheeler noticed this when using fs_mark with more than 1 thread, the throughput would plummet as he added more threads. This patch attempts to fix this problem by recording the average time in nanoseconds that it takes to commit a transaction to disk, and what time we started the transaction. If we run an fsync() and we have been running for less time than it takes to commit the transaction to disk, we sleep for the delta amount of time and then commit to disk. We acheive sub-jiffie sleeping using schedule_hrtimeout. This means that the wait time is auto-tuned to the speed of the underlying disk, instead of having this static timeout. I weighted the average according to somebody's comments (Andreas Dilger I think) in order to help normalize random outliers where we take way longer or way less time to commit than the average. I also have a min() check in there to make sure we don't sleep longer than a jiffie in case our storage is super slow, this was requested by Andrew. I unfortunately do not have access to a Clariion, so I had to use a ramdisk to represent a super fast array. I tested with a SATA drive with barrier=1 to make sure there was no regression with local disks, I tested with a 4 way multipathed Apple Xserve RAID array and of course the ramdisk. I ran the following command fs_mark -d /mnt/ext3-test -s 4096 -n 2000 -D 64 -t $i where $i was 2, 4, 8, 16 and 32. I mkfs'ed the fs each time. Here are my results type threads with patch without patch sata 2 24.6 26.3 sata 4 49.2 48.1 sata 8 70.1 67.0 sata 16 104.0 94.1 sata 32 153.6 142.7 xserve 2 246.4 222.0 xserve 4 480.0 440.8 xserve 8 829.5 730.8 xserve 16 1172.7 1026.9 xserve 32 1816.3 1650.5 ramdisk 2 2538.3 1745.6 ramdisk 4 2942.3 661.9 ramdisk 8 2882.5 999.8 ramdisk 16 2738.7 1801.9 ramdisk 32 2541.9 2394.0 Signed-off-by: Josef Bacik <jbacik@redhat.com> Cc: Andreas Dilger <adilger@sun.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ric Wheeler <rwheeler@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-06jbd: don't give up looking for space so easily in __log_wait_for_spaceTheodore Ts'o
Commit be07c4ed introducd a regression because it assumed that if there were no transactions ready to be checkpointed, that no progress could be made on making space available in the journal, and so the journal should be aborted. This assumption is false; it could be the case that simply calling cleanup_journal_tail() will recover the necessary space, or, for small journals, the currently committing transaction could be responsible for chewing up the required space in the log, so we need to wait for the currently committing transaction to finish before trying to force a checkpoint operation. This patch fixes the bug reported by Meelis Roos at: http://bugzilla.kernel.org/show_bug.cgi?id=11937 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Duane Griffin <duaneg@dghda.com> Cc: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
2008-10-30fs: remove excess kernel-docRandy Dunlap
Delete excess kernel-doc notation in fs/ subdirectory: Warning(linux-2.6.27-git10//fs/jbd/transaction.c:886): Excess function parameter or struct member 'credits' description in 'journal_get_undo_access' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23jbd: abort instead of waiting for nonexistent transactionsDuane Griffin
The __log_wait_for_space function sits in a loop checkpointing transactions until there is sufficient space free in the journal. However, if there are no transactions to be processed (e.g. because the free space calculation is wrong due to a corrupted filesystem) it will never progress. Check for space being required when no transactions are outstanding and abort the journal instead of endlessly looping. This patch fixes the bug reported by Sami Liedes at: http://bugzilla.kernel.org/show_bug.cgi?id=10976 Signed-off-by: Duane Griffin <duaneg@dghda.com> Tested-by: Sami Liedes <sliedes@cc.hut.fi> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23jbd: test BH_Write_EIO to detect errors on metadata buffersHidehiro Kawai
__try_to_free_cp_buf(), __process_buffer(), and __wait_cp_io() test BH_Uptodate flag to detect write I/O errors on metadata buffers. But by commit 95450f5a7e53d5752ce1a0d0b8282e10fe745ae0 "ext3: don't read inode block if the buffer has a write error"(*), BH_Uptodate flag can be set to inode buffers with BH_Write_EIO in order to avoid reading old inode data. So now, we have to test BH_Write_EIO flag of checkpointing inode buffers instead of BH_Uptodate. This patch does it. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23jbd: fix error handling for checkpoint ioHidehiro Kawai
When a checkpointing IO fails, current JBD code doesn't check the error and continue journaling. This means latest metadata can be lost from both the journal and filesystem. This patch leaves the failed metadata blocks in the journal space and aborts journaling in the case of log_do_checkpoint(). To achieve this, we need to do: 1. don't remove the failed buffer from the checkpoint list where in the case of __try_to_free_cp_buf() because it may be released or overwritten by a later transaction 2. log_do_checkpoint() is the last chance, remove the failed buffer from the checkpoint list and abort the journal 3. when checkpointing fails, don't update the journal super block to prevent the journaled contents from being cleaned. For safety, don't update j_tail and j_tail_sequence either 4. when checkpointing fails, notify this error to the ext3 layer so that ext3 don't clear the needs_recovery flag, otherwise the journaled contents are ignored and cleaned in the recovery phase 5. if the recovery fails, keep the needs_recovery flag 6. prevent cleanup_journal_tail() from being called between __journal_drop_transaction() and journal_abort() (a race issue between journal_flush() and __log_wait_for_space() Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20fs/Kconfig: move ext2, ext3, ext4, JBD, JBD2 outAlexey Dobriyan
Use fs/*/Kconfig more, which is good because everything related to one filesystem is in one place and fs/Kconfig is quite fat. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20jbd: ordered data integrity fixHidehiro Kawai
In ordered mode, if a file data buffer being dirtied exists in the committing transaction, we write the buffer to the disk, move it from the committing transaction to the running transaction, then dirty it. But we don't have to remove the buffer from the committing transaction when the buffer couldn't be written out, otherwise it would miss the error and the committing transaction would not abort. This patch adds an error check before removing the buffer from the committing transaction. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20ext3: add an option to control error handling on file dataHidehiro Kawai
If the journal doesn't abort when it gets an IO error in file data blocks, the file data corruption will spread silently. Because most of applications and commands do buffered writes without fsync(), they don't notice the IO error. It's scary for mission critical systems. On the other hand, if the journal aborts whenever it gets an IO error in file data blocks, the system will easily become inoperable. So this patch introduces a filesystem option to determine whether it aborts the journal or just call printk() when it gets an IO error in file data. If you mount a ext3 fs with data_err=abort option, it aborts on file data write error. If you mount it with data_err=ignore, it doesn't abort, just call printk(). data_err=ignore is the default. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20jbd: don't dirty original metadata buffer on abortHidehiro Kawai
Currently, original metadata buffers are dirtied when they are unfiled whether the journal has aborted or not. Eventually these buffers will be written-back to the filesystem by pdflush. This means some metadata buffers are written to the filesystem without journaling if the journal aborts. So if both journal abort and system crash happen at the same time, the filesystem would become inconsistent state. Additionally, replaying journaled metadata can overwrite the latest metadata on the filesystem partly. Because, if the journal aborts, journaled metadata are preserved and replayed during the next mount not to lose uncheckpointed metadata. This would also break the consistency of the filesystem. This patch prevents original metadata buffers from being dirtied on abort by clearing BH_JBDDirty flag from those buffers. Thus, no metadata buffers are written to the filesystem without journaling. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20jbd: abort when failed to log metadata buffersHidehiro Kawai
If we failed to write metadata buffers to the journal space and succeeded to write the commit record, stale data can be written back to the filesystem as metadata in the recovery phase. To avoid this, when we failed to write out metadata buffers, abort the journal before writing the commit record. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12Merge branch 'core/locking' into core/urgentIngo Molnar
2008-08-11lockdep: rename map_[acquire|release]() => lock_map_[acquire|release]()Ingo Molnar
the names were too generic: drivers/uio/uio.c:87: error: expected identifier or '(' before 'do' drivers/uio/uio.c:87: error: expected identifier or '(' before 'while' drivers/uio/uio.c:113: error: 'map_release' undeclared here (not in a function) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11lockdep: map_acquirePeter Zijlstra
Most the free-standing lock_acquire() usages look remarkably similar, sweep them into a new helper. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-04fs: rename buffer trylockNick Piggin
Like the page lock change, this also requires name change, so convert the raw test_and_set bitop to a trylock. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-04mm: rename page trylockNick Piggin
Converting page lock to new locking bitops requires a change of page flag operation naming, so we might as well convert it to something nicer (!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked). This also facilitates lockdeping of page lock. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: don't abort if flushing file data failedHidehiro Kawai
In ordered mode, the current jbd aborts the journal if a file data buffer has an error. But this behavior is unintended, and we found that it has been adopted accidentally. This patch undoes it and just calls printk() instead of aborting the journal. Additionally, set AS_EIO into the address_space object of the failed buffer which is submitted by journal_do_submit_data() so that fsync() can get -EIO. Missing error checkings are also added to inform errors on file data buffers to the user. The following buffers are targeted. (a) the buffer which has already been written out by pdflush (b) the buffer which has been unlocked before scanned in the t_locked_list loop [akpm@linux-foundation.org: improve grammar in a printk] Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: positively dispose the unmapped data buffers in ↵Toshiyuki Okajima
journal_commit_transaction() After ext3-ordered files are truncated, there is a possibility that the pages which cannot be estimated still remain. Remaining pages can be released when the system has really few memory. So, it is not memory leakage. But the resource management software etc. may not work correctly. It is possible that journal_unmap_buffer() cannot release the buffers, and the pages to which they belong because they are attached to a commiting transaction and journal_unmap_buffer() cannot release them. To release such the buffers and the pages later, journal_unmap_buffer() leaves it to journal_commit_transaction(). (journal_unmap_buffer() puts the mark 'BH_Freed' to the buffers so that journal_commit_transaction() can identify whether they can be released or not.) In the journalled mode and the writeback mode, jbd does with only metadata buffers. But in the ordered mode, jbd does with metadata buffers and also data buffers. Actually, journal_commit_transaction() releases only the metadata buffers of which release is demanded by journal_unmap_buffer(), and also releases the pages to which they belong if possible. As a result, the data buffers of which release is demanded by journal_unmap_buffer() remain after a transaction commits. And also the pages to which they belong remain. Such the remained pages don't have mapping any longer. Due to this fact, there is a possibility that the pages which cannot be estimated remain. The metadata buffers marked 'BH_Freed' and the pages to which they belong can be released at 'JBD: commit phase 7'. Therefore, by applying the same code into 'JBD: commit phase 2' (where the data buffers are done with), journal_commit_transaction() can also release the data buffers marked 'BH_Freed' and the pages to which they belong. As a result, all the buffers marked 'BH_Freed' can be released, and also all the pages to which these buffers belong can be released at journal_commit_transaction(). So, the page which cannot be estimated is lost. <<Excerpt of code at 'JBD: commit phase 7'>> > spin_lock(&journal->j_list_lock); > while (commit_transaction->t_forget) { > transaction_t *cp_transaction; > struct buffer_head *bh; > > jh = commit_transaction->t_forget; >... > if (buffer_freed(bh)) { > ^^^^^^^^^^^^^^^^^^^^^^^^ > clear_buffer_freed(bh); > ^^^^^^^^^^^^^^^^^^^^^^^^ > clear_buffer_jbddirty(bh); > } > > if (buffer_jbddirty(bh)) { > JBUFFER_TRACE(jh, "add to new checkpointing trans"); > __journal_insert_checkpoint(jh, commit_transaction); > JBUFFER_TRACE(jh, "refile for checkpoint writeback"); > __journal_refile_buffer(jh); > jbd_unlock_bh_state(bh); > } else { > J_ASSERT_BH(bh, !buffer_dirty(bh)); > ... > JBUFFER_TRACE(jh, "refile or unfile freed buffer"); > __journal_refile_buffer(jh); > if (!jh->b_transaction) { > jbd_unlock_bh_state(bh); > /* needs a brelse */ > journal_remove_journal_head(bh); > release_buffer_page(bh); > ^^^^^^^^^^^^^^^^^^^^^^^^ > } else > } **************************************************************** * Apply the code of "^^^^^^" lines into 'JBD: commit phase 2' * **************************************************************** At journal_commit_transaction() code, there is one extra message in the series of jbd debug messages. ("JBD: commit phase 2") This patch fixes it, too. Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: unexport journal_update_superblockAdrian Bunk
Remove the unused EXPORT_SYMBOL(journal_update_superblock). Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: fix race between free buffer and commit transactionMingming Cao
journal_try_to_free_buffers() could race with jbd commit transaction when the later is holding the buffer reference while waiting for the data buffer to flush to disk. If the caller of journal_try_to_free_buffers() request tries hard to release the buffers, it will treat the failure as error and return back to the caller. We have seen the directo IO failed due to this race. Some of the caller of releasepage() also expecting the buffer to be dropped when passed with GFP_KERNEL mask to the releasepage()->journal_try_to_free_buffers(). With this patch, if the caller is passing the __GFP_WAIT and __GFP_FS to indicating this call could wait, in case of try_to_free_buffers() failed, let's waiting for journal_commit_transaction() to finish commit the current committing transaction, then try to free those buffers again. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mingming Cao <cmm@us.ibm.com> Reviewed-by: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: tidy up revoke cache initialisation and destructionDuane Griffin
Make revocation cache destruction safe to call if initialisation fails partially or entirely. This allows it to be used to cleanup in the case of initialisation failure, simplifying that code slightly. Signed-off-by: Duane Griffin <duaneg@dghda.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: eliminate duplicated code in revocation table init/destroy functionsDuane Griffin
The revocation table initialisation/destruction code is repeated for each of the two revocation tables stored in the journal. Refactoring the duplicated code into functions is tidier, simplifies the logic in initialisation in particular, and slightly reduces the code size. There should not be any functional change. Signed-off-by: Duane Griffin <duaneg@dghda.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: replace potentially false assertion with if blockDuane Griffin
If an error occurs during jbd cache initialisation it is possible for the journal_head_cache to be NULL when journal_destroy_journal_head_cache is called. Replace the J_ASSERT with an if block to handle the situation correctly. Note that even with this fix things will break badly if jbd is statically compiled in and cache initialisation fails. Signed-off-by: Duane Griffin <duaneg@dghda.com Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-14jbd: need to hold j_state_lock to updates to transaction t_state to T_COMMITMingming Cao
Updating the current transaction's t_state is protected by j_state_lock. We need to do the same when updating the t_state to T_COMMIT. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Acked-by: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28jbd: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28jbd: fix possible journal overflow issuesJosef Bacik
There are several cases where the running transaction can get buffers added to its BJ_Metadata list which it never dirtied, which makes its t_nr_buffers counter end up larger than its t_outstanding_credits counter. This will cause issues when starting new transactions as while we are logging buffers we decrement t_outstanding_buffers, so when t_outstanding_buffers goes negative, we will report that we need less space in the journal than we actually need, so transactions will be started even though there may not be enough room for them. In the worst case scenario (which admittedly is almost impossible to reproduce) this will result in the journal running out of space. The fix is to only refile buffers from the committing transaction to the running transactions BJ_Modified list when b_modified is set on that journal, which is the only way to be sure if the running transaction has modified that buffer. This patch also fixes an accounting error in journal_forget, it is possible that we can call journal_forget on a buffer without having modified it, only gotten write access to it, so instead of freeing a credit, we only do so if the buffer was modified. The assert will help catch if this problem occurs. Without these two patches I could hit this assert within minutes of running postmark, with them this issue no longer arises. Thank you, Signed-off-by: Josef Bacik <jbacik@redhat.com> Cc: <linux-ext4@vger.kernel.org> Acked-by: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28jbd: fix the way the b_modified flag is clearedJosef Bacik
Currently at the start of a journal commit we loop through all of the buffers on the committing transaction and clear the b_modified flag (the flag that is set when a transaction modifies the buffer) under the j_list_lock. The problem is that everywhere else this flag is modified only under the jbd lock buffer flag, so it will race with a running transaction who could potentially set it, and have it unset by the committing transaction. This is also a big waste, you can have several thousands of buffers that you are clearing the modified flag on when you may not need to. This patch removes this code and instead clears the b_modified flag upon entering do_get_write_access/journal_get_create_access, so if that transaction does indeed use the buffer then it will be accounted for properly, and if it does not then we know we didn't use it. That will be important for the next patch in this series. Tested thoroughly by myself using postmark/iozone/bonnie++. Signed-off-by: Josef Bacik <jbacik@redhat.com> Cc: <linux-ext4@vger.kernel.org> Acked-by: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-30jbd/jbd2 NULL noiseAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-19fs: fix kernel-doc notation warningsRandy Dunlap
Fix kernel-doc notation warnings in fs/. Warning(mmotm-2008-0314-1449//fs/super.c:560): missing initial short description on line: * mark_files_ro Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line: * lease_get_mtime Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line: * lease_get_mtime Warning(mmotm-2008-0314-1449//fs/namei.c:1368): missing initial short description on line: * lookup_one_len: filesystem helper to lookup single pathname component Warning(mmotm-2008-0314-1449//fs/buffer.c:3221): missing initial short description on line: * bh_uptodate_or_lock: Test whether the buffer is uptodate Warning(mmotm-2008-0314-1449//fs/buffer.c:3240): missing initial short description on line: * bh_submit_read: Submit a locked buffer for reading Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:30): missing initial short description on line: * writeback_acquire: attempt to get exclusive writeback access to a device Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:47): missing initial short description on line: * writeback_in_progress: determine whether there is writeback in progress Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:58): missing initial short description on line: * writeback_release: relinquish exclusive writeback access against a device. Warning(mmotm-2008-0314-1449//include/linux/jbd.h:351): contents before sections Warning(mmotm-2008-0314-1449//include/linux/jbd.h:561): contents before sections Warning(mmotm-2008-0314-1449//fs/jbd/transaction.c:1935): missing initial short description on line: * void journal_invalidatepage() Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-19jbd: correctly unescape journal data blocksDuane Griffin
Fix a long-standing typo (predating git) that will cause data corruption if a journal data block needs unescaping. At the moment the wrong buffer head's data is being unescaped. To test this case mount a filesystem with data=journal, start creating and deleting a bunch of files containing only JFS_MAGIC_NUMBER (0xc03b3998), then pull the plug on the device. Without this patch the files will contain zeros instead of the correct data after recovery. Signed-off-by: Duane Griffin <duaneg@dghda.com> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-19jbd: fix jbd kernel-doc notationRandy Dunlap
Fix kernel-doc notation in jbd. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-03docbook: fix filesystems.tmpl source filesRandy Dunlap
Fix docbook problems in filesystems.tmpl. These cause the generated docbook to be incorrect. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01[PATCH] jbd: Remove useless loop when writing commit recordJan Kara
Commit block was intended to have several copies of the header. But due to a bug it never had them and actually, nobody checks that. So just remove the useless loop. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-08ext3 can fail badly when device stops accepting BIO_RW_BARRIER requestsNeil Brown
Some devices - notably dm and md - can change their behaviour in response to BIO_RW_BARRIER requests. They might start out accepting such requests but on reconfiguration, they find out that they cannot any more. ext3 (and other filesystems) deal with this by always testing if BIO_RW_BARRIER requests fail with EOPNOTSUPP, and retrying the write requests without the barrier (probably after waiting for any pending writes to complete). However there is a bug in the handling for this for ext3. When ext3 (jbd actually) decides to submit a BIO_RW_BARRIER request, it sets the buffer_ordered flag on the buffer head. If the request completes successfully, the flag STAYS SET. Other code might then write the same buffer_head after the device has been reconfigured to not accept barriers. This write will then fail, but the "other code" is not ready to handle EOPNOTSUPP errors and the error will be treated as fatal. This can be seen without having to reconfigure a device at exactly the wrong time by putting: if (buffer_ordered(bh)) printk("OH DEAR, and ordered buffer\n"); in the while loop in "commit phase 5" of journal_commit_transaction. If it ever prints the "OH DEAR ..." message (as it does sometimes for me), then that request could (in different circumstances) have failed with EOPNOTSUPP, but that isn't tested for. My proposed fix is to clear the buffer_ordered flag after it has been used, as in the following patch. Signed-off-by: Neil Brown <neilb@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06make jbd/journal.c:__journal_abort_hard() staticAdrian Bunk
__journal_abort_hard() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06BKL-removal: remove incorrect comment refering to lock_kernel() from jbd/jbd2Andi Kleen
None of the callers of this function does actually take the BKL as far as I can see. So remove the comment refering to the BKL. Signed-off-by: Andi Kleen <ak@suse.de> Cc: <linux-ext4@vger.kernel.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-30spinlock: lockbreak cleanupNick Piggin
The break_lock data structure and code for spinlocks is quite nasty. Not only does it double the size of a spinlock but it changes locking to a potentially less optimal trylock. Put all of that under CONFIG_GENERIC_LOCKBREAK, and introduce a __raw_spin_is_contended that uses the lock data itself to determine whether there are waiters on the lock, to be used if CONFIG_GENERIC_LOCKBREAK is not set. Rename need_lockbreak to spin_needbreak, make it use spin_is_contended to decouple it from the spinlock implementation, and make it typesafe (rwlocks do not have any need_lockbreak sites -- why do they even get bloated up with that break_lock then?). Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-17jbd: do not try lock_acquire after handle made invalidJonas Bonn
This likely fixes the oops in __lock_acquire reported as: http://www.kerneloops.org/raw.php?rawid=2753&msgid= http://www.kerneloops.org/raw.php?rawid=2749&msgid= In these reported oopses, start_this_handle is returning -EROFS. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05jbd: Fix assertion failure in fs/jbd/checkpoint.cJan Kara
Before we start committing a transaction, we call __journal_clean_checkpoint_list() to cleanup transaction's written-back buffers. If this call happens to remove all of them (and there were already some buffers), __journal_remove_checkpoint() will decide to free the transaction because it isn't (yet) a committing transaction and soon we fail some assertion - the transaction really isn't ready to be freed :). We change the check in __journal_remove_checkpoint() to free only a transaction in T_FINISHED state. The locking there is subtle though (as everywhere in JBD ;(). We use j_list_lock to protect the check and a subsequent call to __journal_drop_transaction() and do the same in the end of journal_commit_transaction() which is the only place where a transaction can get to T_FINISHED state. Probably I'm too paranoid here and such locking is not really necessary - checkpoint lists are processed only from log_do_checkpoint() where a transaction must be already committed to be processed or from __journal_clean_checkpoint_list() where kjournald itself calls it and thus transaction cannot change state either. Better be safe if something changes in future... Signed-off-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19JBD: Fix JBD warnings when compiling with CONFIG_JBD_DEBUGJose R. Santos
Note from Mingming's JBD2 fix: Noticed all warnings are occurs when the debug level is 0. Then found the "jbd2: Move jbd2-debug file to debugfs" patch http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0f49d5d019afa4e94253bfc92f0daca3badb990b changed the jbd2_journal_enable_debug from int type to u8, makes the jbd_debug comparision is always true when the debugging level is 0. Thus the compile warning occurs. Thought about changing the jbd2_journal_enable_debug data type back to int, but can't, because the jbd2-debug is moved to debug fs, where calling debugfs_create_u8() to create the debugfs entry needs the value to be u8 type. Even if we changed the data type back to int, the code is still buggy, kernel should not print jbd2 debug message if the jbd2_journal_enable_debug is set to 0. But this is not the case. The fix is change the level of debugging to 1. The same should fixed in ext3/JBD, but currently ext3 jbd-debug via /proc fs is broken, so we probably should fix it all together. Signed-off-by: Jose R. Santos <jrs@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19jbd: fix commit code to properly abort journalJan Kara
We should really call journal_abort() and not __journal_abort_hard() in case of errors. The latter call does not record the error in the journal superblock and thus filesystem won't be marked as with errors later (and user could happily mount it without any warning). Signed-off-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>