aboutsummaryrefslogtreecommitdiff
path: root/fs/jffs2
AgeCommit message (Collapse)Author
2007-05-09Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (21 commits) [MTD] [CHIPS] Remove MTD_OBSOLETE_CHIPS (jedec, amd_flash, sharp) [MTD] Delete allegedly obsolete "bank_size" field of mtd_info. [MTD] Remove unnecessary user space check from mtd.h. [MTD] [MAPS] Remove flash maps for no longer supported 405LP boards [MTD] [MAPS] Fix missing printk() parameter in physmap_of.c MTD driver [MTD] [NAND] platform NAND driver: add driver [MTD] [NAND] platform NAND driver: update header [JFFS2] Simplify and clean up jffs2_add_tn_to_tree() some more. [JFFS2] Remove another bogus optimisation in jffs2_add_tn_to_tree() [JFFS2] Remove broken insert_point optimisation in jffs2_add_tn_to_tree() [JFFS2] Remember to calculate overlap on nodes which replace older nodes [JFFS2] Don't advance c->wbuf_ofs to next eraseblock after wbuf flush [MTD] [NAND] at91_nand.c: CMDLINE_PARTS support [MTD] [NAND] Tidy up handling of page number in nand_block_bad() [MTD] block2mtd_paramline[] mustn't be __initdata [MTD] [NAND] Support multiple chips in CAFÉ driver [MTD] [NAND] Rename cafe.c to cafe_nand.c and remove the multi-obj magic [MTD] [NAND] Use rslib for CAFÉ ECC [RSLIB] Support non-canonical GF representations [JFFS2] Remove dead file histo_mips.h ...
2007-05-08[JFFS2] Simplify and clean up jffs2_add_tn_to_tree() some more.David Woodhouse
Fixing at least a couple more bugs in the process. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-07slab allocators: Remove SLAB_DEBUG_INITIAL flagChristoph Lameter
I have never seen a use of SLAB_DEBUG_INITIAL. It is only supported by SLAB. I think its purpose was to have a callback after an object has been freed to verify that the state is the constructor state again? The callback is performed before each freeing of an object. I would think that it is much easier to check the object state manually before the free. That also places the check near the code object manipulation of the object. Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was compiled with SLAB debugging on. If there would be code in a constructor handling SLAB_DEBUG_INITIAL then it would have to be conditional on SLAB_DEBUG otherwise it would just be dead code. But there is no such code in the kernel. I think SLUB_DEBUG_INITIAL is too problematic to make real use of, difficult to understand and there are easier ways to accomplish the same effect (i.e. add debug code before kfree). There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be clear in fs inode caches. Remove the pointless checks (they would even be pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors. This is the last slab flag that SLUB did not support. Remove the check for unimplemented flags from SLUB. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07[JFFS2] Remove another bogus optimisation in jffs2_add_tn_to_tree()David Woodhouse
We attempted to insert new nodes into the tree by just using rb_replace_node to let them replace an earlier node which they completely overlapped. However, that could place the new node into the wrong place in the tree, since its start could be node only before the start of the victim, but before the node _before_ the victim in the tree (if that previous node actually ends _after_ the new node, thus isn't entirely overlapped and wasn't itself chosen to be the victim). Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-06[JFFS2] Remove broken insert_point optimisation in jffs2_add_tn_to_tree()David Woodhouse
The original code would remember, during the first pass over the tree, a suitable place to start the insertion from when we eventually come to add a new node. The optimisation was broken, and we sometimes ended up inserting a new node in the wrong place because we started the insertion from the wrong point. Just ditch the optimisation and start the insertion from the root of the tree, for now. I'll try it again when I'm feeling cleverer. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-05[JFFS2] Remember to calculate overlap on nodes which replace older nodesDavid Woodhouse
This fixes a problem Artem found with the integck test tool -- we weren't correctly keeping track of the 'overlap' flag in some cases, which led to the nodes being played back in an incorrect order and file corruption. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-05[JFFS2] Don't advance c->wbuf_ofs to next eraseblock after wbuf flushDavid Woodhouse
After flushing the last page of an eraseblock, don't leave the wbuf 'offset' field pointing at the start of the next physical eraseblock. This was causing a BUG() on NOR-ECC (Sibley) flash, where we start writing a little further in, after the cleanmarker. Debugged by Alexander Belyakov <abelyako@googlemail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-02[JFFS2] Remove dead file histo_mips.hDavid Woodhouse
Its contents were subsumed into compr_rubin.c in a previous commit, but I forgot to git-rm it. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/mtd/Kconfig Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27JFFS2: add UBI supportArtem Bityutskiy
This patch make JFFS2 able to work with UBI volumes via the emulated MTD devices which are directly mapped to these volumes. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
2007-04-26[JFFS2] Fix compr_rubin.c build after include file elimination.Andrew Morton
It seems to be silly season lately. (Oops, test builds are more useful if the file in question is actually configured on. dwmw2). Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25[JFFS2] Handle inodes with only a single metadata node with non-zero isizeDavid Woodhouse
This should never happen unless there's corruption on the medium and the actual data nodes go missing. But the failure mode (an oops when we assume the fragtree isn't empty and go looking for its last node) isn't useful. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25[JFFS2] Tidy up licensing/copyright boilerplate.David Woodhouse
In particular, remove the bit in the LICENCE file about contacting Red Hat for alternative arrangements. Their errant IS department broke that arrangement a long time ago -- the policy of collecting copyright assignments from contributors came to an end when the plug was pulled on the servers hosting the project, without notice or reason. We do still dual-license it for use with eCos, with the GPL+exception licence approved by the FSF as being GPL-compatible. It's just that nobody has the right to license it differently. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25[JFFS2] Better fix for all-zero node headersJoakim Tjernlund
No need to check for all-zero header since the header cannot be zero due to other checks. Replace the all-zero header check in readinode.c with a check for the magic word. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25[JFFS2] Improve read_inode memory usage, v2.David Woodhouse
We originally used to read every node and allocate a jffs2_tmp_dnode_info structure for each, before processing them in (reverse) version order and discarding the ones which are obsoleted by later nodes. With huge logfiles, this behaviour caused memory problems. For example, a file involved in OLPC trac #1292 has 1822391 nodes, and would cause the XO machine to run out of memory during the first stage of read_inode(). Instead of just inserting nodes into a tree in version order as we find them, we now put them into a tree in order of their offset within the file, which allows us to immediately discard nodes which are completely obsoleted. We don't use a full tree with 'fragments' pointing to the real data structure, as we do in the normal fragtree. We sort only on the start address, and add an 'overlapped' flag to the tmp_dnode_info to indicate that the node in question is (partially) overlapped by another. When the scan is complete, we start at the end of the file, adding each node to a real fragtree as before. Where the node is non-overlapped, we just add it (it doesn't matter that it's not the latest version; there is no overlap). When the node at the end of the tree _is_ overlapped, we sort it and all its overlapping nodes into version order and then add them to the fragtree in that order. This 'early discard' reduces the peak allocation of tmp_dnode_info structures from 1.8M to a mere 62872 (3.5%) in the degenerate case referenced above. This version of the patch also correctly rememembers the highest node version# seen for an inode when it's scanned. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-23[JFFS2] Improve failure mode if inode checking leaves unchecked space.David Woodhouse
We should never find the unchecked size is non-zero after we've finished checking all inodes. If it happens, used to BUG(), leaving the alloc_sem held and deadlocking. Instead, just return -ENOSPC after complaining. The GC thread will die, but read-only operation should be able to continue and the file system should be unmountable. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-23[JFFS2] Fix cross-endian build.David Woodhouse
When compiling a LE-capable JFFS2 on PowerPC, wbuf.c fails to compile: fs/jffs2/wbuf.c:973: error: braced-group within expression allowed only inside a function fs/jffs2/wbuf.c:973: error: initializer element is not constant fs/jffs2/wbuf.c:973: error: (near initialization for ‘oob_cleanmarker.magic’) fs/jffs2/wbuf.c:974: error: braced-group within expression allowed only inside a function fs/jffs2/wbuf.c:974: error: initializer element is not constant fs/jffs2/wbuf.c:974: error: (near initialization for ‘oob_cleanmarker.nodetype’) fs/jffs2/wbuf.c:975: error: braced-group within expression allowed only inside a function fs/jffs2/wbuf.c:976: error: initializer element is not constant fs/jffs2/wbuf.c:976: error: (near initialization for ‘oob_cleanmarker.totlen’) Provide constant_cpu_to_je{16,32} functions, and use them for initialising the offending structure. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-20[JFFS2] Obsolete dirent nodes immediately on unlink, where possible.Joakim Tjernlund
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17[JFFS2] Speed up mount for directly-mapped NOR flashJoakim Tjernlund
Remove excessive scanning of empty flash after a clean marker for users of the point/unpoint method. cfi_cmdset_0001 uses point/unpoint by default iff flash mapping is linear. The speedup is several orders of magnitude if FS is less than half full. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17[JFFS2] fix buffer sise calculations in jffs2_get_inode_nodes()Artem Bityutskiy
In read inode we have an optimization which prevents one min. I/O unit (e.g. NAND page) to be read more then once. Namely, at the beginning we do not know which node type we read, so we read so we assume we read the directory entry, because it has the smallest node header. When we read it, we read up to the next min. I/O unit, just because if later we'll need to read more, we already have this data. If it turns out to be that the node is not directory entry, and we need more data, and we did not read it because it sits in the next min. I/O unit, we read the whole next (or several next) min. I/O unit(s). And if it happens to be that we read a data node, and we've read part of its data, we calculate partial CRC. So if later we need to check data CRC, we'll only read the rest of the data from further min. I/O units and continue CRC checking. This code was a bit messy and buggy. The bug was that it assumed relatively large min. I/O unit, so that the largest node header could overlap only one min. I/O unit boundary. This parch clean-ups the code a bit and fixes this bug. The patch was not tested on flash with small min. I/O unit, like NOR-ECC, nut it was tested on NAND with 512 bytes NAND page, so it at least does not break NAND. It was also tested with mtdram so it should not break NOR. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17[JFFS2] Disable summary after wbuf recoveryAdrian Hunter
After a write error, any data in the write buffer must be relocated. This is handled by the jffs2_wbuf_recover function. This function does not fix up the erase block summary information that is collected for writing at the end of the block, which results in an incorrect summary (or BUG if the summary was found to be empty). As the summary is not essential (it is an optimisation), it may be disabled for the current erase block when this situation arises. This patch does that. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17[JFFS2] Prevent list corruption when handling write errorsAdrian Hunter
If a write error occurs, the affected block is placed on the bad_used_list. In the case that the write error occured when writing summary data the block was also being placed on the dirty_list, which caused list corruption and ultimately a soft lockup in jffs2_mark_node_obsolete. This fixes that. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17[JFFS2] fix deadlock on error pathArtem Bityutskiy
When the MTD driver returns write failure, the following deadlock occurs: We are in __jffs2_flush_wbuf(), we hold &c->wbuf_sem. Write failure. jffs2_wbuf_recover()->jffs2_reserve_space_gc()->jffs2_do_reserve_space() ->jffs2_erase_pending_blocks()->jffs2_flash_read() and it tries to lock &c->wbuf_sem again. Deadlock. Reported-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17[JFFS2] check node crc before doing anything elseThomas Gleixner
Check the node CRC on scan before doing anything else with the node. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-02[JFFS2] Delete everything related to obsolete JFFS2_PROC optionRobert P. J. Day
Delete everything related to the apparently non-existent kernel config option JFFS2_PROC. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-10[JFFS2] Remove superfluous source file fs/jffs2/comprtest.cRobert P. J. Day
Delete the obsolete source file fs/jffs2/comprtest.c. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-09[JFFS2] print a message when marking bad blockArtem Bityutskiy
New bad eraseblock is an event which is important enough to be printed about. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-09[JFFS2] Check for all-zero node headersDavid Woodhouse
Due to a poor choice of CRC32 seed, a node header which is all zeroes would pass the CRC32 check. Explicitly check for this case, and treat it as we do a CRC failure. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-08[JFFS2] Use yield() between GC passes in background thread.David Woodhouse
The garbage collection thread is strictly an optimisation. Everything it does would also be done just-in-time in the context of something in userspace trying to access the file system. Sometimes, however, it's a pessimisation. Especially during early boot when it's checksumming nodes and scanning inodes which are shortly going to be pulled in by read_inode anyway. We end up building the rbtree of node coverage twice for the same inode. By switching to yield() instead of cond_resched() in the main loop, we observe boot times on the OLPC system going down from about 100 seconds to 60. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-08[JFFS2] Fix writebuffer recovery in the first page of a blockVitaly Wool
For the case when nand_write_page fail with -EIO for the first page in an eraseblock, jffs2_wbuf_recover ends up producing a BUG in jffs2_block_refile as jeb->first_node is not yet set up (it's set up later in jffs2_wbuf_recover). This BUG is not really a bug; it's just jffs2_wbuf_recover calling jffs2_block_refile with the wrong second parameter. This patch takes care of this situation. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-02-19Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (49 commits) [MTD] [NAND] S3C2412 fix hw ecc [MTD] [NAND] Work around false compiler warning in CAFÉ driver [JFFS2] printk warning fixes [MTD] [MAPS] ichxrom warning fix [MTD] [MAPS] amd76xrom warning fix [MTD] [MAPS] esb2rom warning fixes [MTD] [MAPS] ck804xrom warning fix [MTD] [MAPS] netsc520 warning fix [MTD] [MAPS] sc520cdp warning fix [MTD] [ONENAND] onenand_base warning fix [MTD] [NAND] eXcite nand flash driver [MTD] Improve heuristic for detecting wrong-endian RedBoot partition table [MTD] Fix RedBoot partition parsing regression harder. [MTD] [NAND] S3C2410: Hardware ECC correction code [JFFS2] Use MTD_OOB_AUTO to automatically place cleanmarker on NAND [MTD] Clarify OOB-operation interface comments [MTD] remove unused ecctype,eccsize fields from struct mtd_info [MTD] [NOR] Intel: remove ugly PROGREGION macros [MTD] [NOR] STAA: use writesize instead off eccsize to represent ECC block [MTD] OneNAND: Invalidate bufferRAM after erase ...
2007-02-18[JFFS2] printk warning fixesAndrew Morton
fs/jffs2/wbuf.c: In function 'jffs2_check_oob_empty': fs/jffs2/wbuf.c:993: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' fs/jffs2/wbuf.c:993: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' fs/jffs2/wbuf.c: In function 'jffs2_check_nand_cleanmarker': fs/jffs2/wbuf.c:1036: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' fs/jffs2/wbuf.c:1036: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' fs/jffs2/wbuf.c: In function 'jffs2_write_nand_cleanmarker': fs/jffs2/wbuf.c:1062: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' fs/jffs2/wbuf.c:1062: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Mark struct super_operations constJosef 'Jeff' Sipek
This patch is inspired by Arjan's "Patch series to mark struct file_operations and struct inode_operations const". Compile tested with gcc & sparse. Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] mark struct inode_operations const 2Arjan van de Ven
Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09[JFFS2] Use MTD_OOB_AUTO to automatically place cleanmarker on NANDArtem Bityutskiy
Nowadays MTD supports an MTD_OOB_AUTO option which allows users to access free bytes in NAND's OOB as a contiguous buffer, although it may be highly discontinuous. This patch teaches JFFS2 to use this nice feature instead of the old MTD_OOB_PLACE option. This for example caused problems with OneNAND. Now JFFS2 does not care how are the free bytes situated. This may change position of the clean marker on some flashes, but this is not a problem. JFFS2 will just re-erase the empty eraseblocks and write the new (correct) clean marker. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-02-09JFFS2: memory leak in jffs2_do_mount_fs()Dmitry Adamushko
If jffs2_sum_init() fails, c->blocks is not freed neither in jffs2_do_mount_fs() nor in jffs2_do_fill_super(). Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-01-18Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2007-01-13[JFFS2] debug.h: include <linux/sched.h> for current->pidDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-01-10[JFFS2] use the ref_offset macroKyungmin Park
Don't use ref->flash_offset directly in debugging code, use the ref_offset macro instead. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
2007-01-10[JFFS2] Reschedule in loopsArtem Bityutskiy
Make JFFS2 nicer and teach it to call cond_resched() in loops which may be quite large. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
2007-01-02[JFFS2] Fix error-path leak in summary scanAmit Choudhary
Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-12-19[JFFS2] add cond_resched() when garbage collecting deletion direntArtem Bityutskiy
We observe soft lockups when doing heavy test which creates directory with a lot of direntries and deletes them. This cycle is the reason fo this. Make it nicer and add cond_resched() inside of it. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-12-10[JFFS2] replace kmalloc+memset with kzallocYan Burman
Replace kmalloc+memset with kzalloc Signed-off-by: Yan Burman <burman.yan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-12-08[PATCH] struct path: convert jffs2Josef Sipek
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Add include/linux/freezer.h and move definitions from sched.hNigel Cunningham
Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove kmem_cache_tChristoph Lameter
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove SLAB_KERNELChristoph Lameter
SLAB_KERNEL is an alias of GFP_KERNEL. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04[PATCH] severing fs.h, radix-tree.h -> sched.hAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-11-29[MTD] return error code from get_mtd_device()Artem Bityutskiy
get_mtd_device() returns NULL in case of any failure. Teach it to return an error code instead. Fix all users as well. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>