aboutsummaryrefslogtreecommitdiff
path: root/fs/lockd/mon.c
AgeCommit message (Collapse)Author
2009-08-09lockd: Replace nsm_display_address() with rpc_ntop()Chuck Lever
Clean up. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17lockd: Don't bother with RPC ping for NSM upcallsChuck Lever
Cut NSM upcall RPC traffic in half -- don't do a NULL call first. The cases where a ping would be helpful are rare. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17lockd: Update NSM state from SM_MON repliesChuck Lever
When rpc.statd starts up in user space at boot time, it attempts to write the latest NSM local state number into /proc/sys/fs/nfs/nsm_local_state. If lockd.ko isn't loaded yet (as is the case in most configurations), that file doesn't exist, thus the kernel's NSM state remains set to its initial value of zero during lockd operation. This is a problem because rpc.statd and lockd use the NSM state number to prevent repeated lock recovery on rebooted hosts. If lockd sends a zero NSM state, but then a delayed SM_NOTIFY with a real NSM state number is received, there is no way for lockd or rpc.statd to distinguish that stale SM_NOTIFY from an actual reboot. Thus lock recovery could be performed after the rebooted host has already started reclaiming locks, and those locks will be lost. We could change /etc/init.d/nfslock so it always modprobes lockd.ko before starting rpc.statd. However, if lockd.ko is ever unloaded and reloaded, we are back at square one, since the NSM state is not preserved across an unload/reload cycle. This may happen frequently on clients that use automounter. A period of NFS inactivity causes lockd.ko to be unloaded, and the kernel loses its NSM state setting. Instead, let's use the fact that rpc.statd plants the local system's NSM state in every SM_MON (and SM_UNMON) reply. lockd performs a synchronous SM_MON upcall to the local rpc.statd _before_ sending its first NLM request to a new remote. This would permit rpc.statd to provide the current NSM state to lockd, even after lockd.ko had been unloaded and reloaded. Note that NLMPROC_LOCK arguments are constructed before the nsm_monitor() call, so we have to rearrange argument construction very slightly to make this all work out. And, the kernel appears to treat NSM state as a u32 (see struct nlm_args and nsm_res). Make nsm_local_state a u32 as well, to ensure we don't get bogus comparison results. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-04-01NSM: Fix unaligned accesses in nsm_init_private()Mans Rullgard
This fixes unaligned accesses in nsm_init_private() when creating nlm_reboot keys. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-01-06NSM: Move nsm_create()Chuck Lever
Clean up: one last thing... relocate nsm_create() to eliminate the forward declaration and group it near the only function that actually uses it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Move nsm_use_hostnames to mon.cChuck Lever
Clean up. Treat the nsm_use_hostnames global variable like nsm_local_state. Note that the default value of nsm_use_hostnames is still zero. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Move nsm_addr() to fs/lockd/mon.cChuck Lever
Clean up: nsm_addr_in() is no longer used, and nsm_addr() is used only in fs/lockd/mon.c, so move it there. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Remove include/linux/lockd/sm_inter.hChuck Lever
Clean up: The include/linux/lockd/sm_inter.h header is nearly empty now. Remove it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Replace IP address as our nlm_reboot lookup keyChuck Lever
NLM provides file locking services for NFS files. Part of this service includes a second protocol, known as NSM, which is a reboot notification service. NLM uses this service to determine when to reclaim locks or enter a grace period after a client or server reboots. The NLM service (implemented by lockd in the Linux kernel) contacts the local NSM service (implemented by rpc.statd in Linux user space) via NSM protocol upcalls to register a callback when a particular remote peer reboots. To match the callback to the correct remote peer, the NLM service constructs a cookie that it passes in the request. The NSM service passes that cookie back to the NLM service when it is notified that the given remote peer has indeed rebooted. Currently on Linux, the cookie is the raw 32-bit IPv4 address of the remote peer. To support IPv6 addresses, which are larger, we could use all 16 bytes of the cookie to represent a full IPv6 address, although we still can't represent an IPv6 address with a scope ID in just 16 bytes. Instead, to avoid the need for future changes to support additional address types, we'll use a manufactured value for the cookie, and use that to find the corresponding nsm_handle struct in the kernel during the NLMPROC_SM_NOTIFY callback. This should provide complete support in the kernel's NSM implementation for IPv6 hosts, while remaining backwards compatible with older rpc.statd implementations. Note we also deal with another case where nsm_use_hostnames can change while there are outstanding notifications, possibly resulting in the loss of reboot notifications. After this patch, the priv cookie is always used to lookup rebooted hosts in the kernel. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: More clean up of nsm_get_handle()Chuck Lever
Clean up: refactor nsm_get_handle() so it is organized the same way that nsm_reboot_lookup() is. There is an additional micro-optimization here. This change moves the "hostname & nsm_use_hostnames" test out of the list_for_each_entry() clause in nsm_get_handle(), since it is loop-invariant. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Refactor nsm_handle creation into a helper functionChuck Lever
Clean up. Refactor the creation of nsm_handles into a helper. Fields are initialized in increasing address order to make efficient use of CPU caches. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NLM: Remove "create" argument from nsm_find()Chuck Lever
Clean up: nsm_find() now has only one caller, and that caller unconditionally sets the @create argument. Thus the @create argument is no longer needed. Since nsm_find() now has a more specific purpose, pick a more appropriate name for it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Add nsm_lookup() functionChuck Lever
Introduce a new API to fs/lockd/mon.c that allows nlm_host_rebooted() to lookup up nsm_handles via the contents of an nlm_reboot struct. The new function is equivalent to calling nsm_find() with @create set to zero, but it takes a struct nlm_reboot instead of separate arguments. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Encode the new "priv" cookie for NSMPROC_MON requestsChuck Lever
Pass the new "priv" cookie to NSMPROC_MON's XDR encoder, instead of creating the "priv" argument in the encoder at call time. This patch should not cause a behavioral change: the contents of the cookie remain the same for the time being. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Generate NSMPROC_MON's "priv" argument when nsm_handle is createdChuck Lever
Introduce a new data type, used by both the in-kernel NLM and NSM implementations, that is used to manage the opaque "priv" argument for the NSMPROC_MON and NLMPROC_SM_NOTIFY calls. Construct the "priv" cookie when the nsm_handle is created. The nsm_init_private() function may look a little strange, but it is roughly equivalent to how the XDR encoder formed the "priv" argument. It's going to go away soon. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Remove !nsm check from nsm_release()Chuck Lever
The nsm_release() function should never be called with a NULL handle point. If it is, that's a bug. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Remove NULL pointer check from nsm_find()Chuck Lever
The nsm_find() function should never be called with a NULL IP address pointer. If it is, that's a bug. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Add dprintk() calls in nsm_find and nsm_releaseChuck Lever
Introduce some dprintk() calls in fs/lockd/mon.c that are enabled by the NLMDBG_MONITOR flag. These report when we find, create, and release nsm_handles. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Move nsm_find() to fs/lockd/mon.cChuck Lever
The nsm_find() function sets up fresh nsm_handle entries. This is where we will store the "priv" cookie used to lookup nsm_handles during reboot recovery. The cookie will be constructed when nsm_find() creates a new nsm_handle. As much as possible, I would like to keep everything that handles a "priv" cookie in fs/lockd/mon.c so that all the smarts are in one source file. That organization should make it pretty simple to see how all this works. To me, it makes more sense than the current arrangement to keep nsm_find() with nsm_monitor() and nsm_unmonitor(). So, start reorganizing by moving nsm_find() into fs/lockd/mon.c. The nsm_release() function comes along too, since it shares the nsm_lock global variable. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: move to xdr_stream-based XDR encoders and decodersChuck Lever
Introduce xdr_stream-based XDR encoder and decoder functions, which are more careful about preventing RPC buffer overflows. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Move NSM program and procedure numbers to fs/lockd/mon.cChuck Lever
Clean up: Move the RPC program and procedure numbers for NSM into the one source file that needs them: fs/lockd/mon.c. And, as with NLM, NFS, and rpcbind calls, use NSMPROC_FOO instead of SM_FOO for NSM procedure numbers. Finally, make a couple of comments more precise: what is referred to here as SM_NOTIFY is really the NLM (lockd) NLMPROC_SM_NOTIFY downcall, not NSMPROC_NOTIFY. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Move NSM-related XDR data structures to lockd's xdr.hChuck Lever
Clean up: NSM's XDR data structures are used only in fs/lockd/mon.c, so move them there. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Check result of SM_UNMON upcallChuck Lever
Make sure any error returned by rpc.statd during an SM_UNMON call is reported rather than ignored completely. There isn't much to do with such an error, but we should log it in any case. Similar to a recent change to nsm_monitor(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NLM: Move the public declaration of nsm_unmonitor() to lockd.hChuck Lever
Clean up. Make the nlm_host argument "const," and move the public declaration to lockd.h. Add a documenting comment. Bruce observed that nsm_unmonitor()'s only caller doesn't care about its return code, so make nsm_unmonitor() return void. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Release nsmhandle in nlm_destroy_hostChuck Lever
The nsm_handle's reference count is bumped in nlm_lookup_host(). It should be decremented in nlm_destroy_host() to make it easier to see the balance of these two operations. Move the nsm_release() call to fs/lockd/host.c. The h_nsmhandle pointer is set in nlm_lookup_host(), and never cleared. The nlm_destroy_host() function is never called for the same nlm_host twice, so h_nsmhandle won't ever be NULL when nsm_unmonitor() is called. All references to the nlm_host are gone before it is freed. We can skip making h_nsmhandle NULL just before the nlm_host is deallocated. It's also likely we can remove the h_nsmhandle NULL check in nlmsvc_is_client() as well, but we can do that later when rearchitect- ing the nlm_host cache. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NLM: Move the public declaration of nsm_monitor() to lockd.hChuck Lever
Clean up. Make the nlm_host argument "const," and move the public declaration to lockd.h with other NSM public function (nsm_release, eg) and global variable declarations. Add a documenting comment. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Make sure to return an error if the SM_MON call result is not zeroChuck Lever
The nsm_monitor() function reports an error and does not set sm_monitored if the SM_MON upcall reply has a non-zero result code, but nsm_monitor() does not return an error to its caller in this case. Since sm_monitored is not set, the upcall is retried when the next NLM request invokes nsm_monitor(). However, that may not come for a while. In the meantime, at least one NLM request will potentially proceed without the peer being monitored properly. Have nsm_monitor() return an error if the result code is non-zero. This will cause all NLM requests to fail immediately if the upcall completed successfully but rpc.statd returned an error. This may be inconvenient in some cases (for example if rpc.statd cannot complete a proper DNS reverse lookup of the hostname), but will make the reboot monitoring service more robust by forcing such issues to be corrected by an admin. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Remove BUG_ON() in nsm_monitor()Chuck Lever
Clean up: Remove the BUG_ON() invocation in nsm_monitor(). It's not likely that nsm_monitor() is ever called with a NULL host pointer, and the code will die anyway if host is NULL. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Use sm_name instead of h_name in nsm_monitor() and nsm_unmonitor()Chuck Lever
Clean up: Use the sm_name field for reporting the hostname in nsm_monitor() and nsm_unmonitor(), just as the other functions in fs/lockd/mon.c do. The h_name field is just a copy of the sm_name pointer. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Support IPv6 version of mon_nameChuck Lever
The "mon_name" argument of the NSMPROC_MON and NSMPROC_UNMON upcalls is a string that contains the hostname or IP address of the remote peer to be notified when this host has rebooted. The sm-notify command uses this identifier to contact the peer when we reboot, so it must be either a well-qualified DNS hostname or a presentation format IP address string. When the "nsm_use_hostnames" sysctl is set to zero, the kernel's NSM provides a presentation format IP address in the "mon_name" argument. Otherwise, the "caller_name" argument from NLM requests is used, which is usually just the DNS hostname of the peer. To support IPv6 addresses for the mon_name argument, we use the nsm_handle's address eye-catcher, which already contains an appropriate presentation format address string. Using the eye-catcher string obviates the need to use a large buffer on the stack to form the presentation address string for the upcall. This patch also addresses a subtle bug. An NSMPROC_MON request and the subsequent NSMPROC_UNMON request for the same peer are required to use the same value for the "mon_name" argument. Otherwise, rpc.statd's NSMPROC_UNMON processing cannot locate the database entry for that peer and remove it. If the setting of nsm_use_hostnames is changed between the time the kernel sends an NSMPROC_MON request and the time it sends the NSMPROC_UNMON request for the same peer, the "mon_name" argument for these two requests may not be the same. This is because the value of "mon_name" is currently chosen at the moment the call is made based on the setting of nsm_use_hostnames To ensure both requests pass identical contents in the "mon_name" argument, we now select which string to use for the argument in the nsm_monitor() function. A pointer to this string is saved in the nsm_handle so it can be used for a subsequent NSMPROC_UNMON upcall. NB: There are other potential problems, such as how nlm_host_rebooted() might behave if nsm_use_hostnames were changed while hosts are still being monitored. This patch does not attempt to address those problems. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: convert printk(KERN_DEBUG) to a dprintk()Chuck Lever
Clean up: make the printk(KERN_DEBUG) in nsm_mon_unmon() a dprintk, and add another dprintk to note if creating an RPC client for the upcall failed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Use C99 structure initializer to initialize nsm_argsChuck Lever
Clean up: Use a C99 structure initializer instead of open-coding the initialization of nsm_args. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-31fs: replace NIPQUAD()Harvey Harrison
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-29NSM: Use sockaddr_storage for sm_addr fieldChuck Lever
To store larger addresses in the nsm_handle structure, make sm_addr a sockaddr_storage. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-03-19lockd: introduce new function to encode private argument in SM_MON requestsChuck Lever
Clean up: refactor the encoding of the opaque 16-byte private argument in xdr_encode_mon(). This will be updated later to support IPv6 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-19lockd: Fix up incorrect RPC buffer size calculations.Chuck Lever
Switch to using the new mon_id encoder function. Now that we've refactored the encoding of SM_MON requests, we've discovered that the pre-computed buffer length maximums are incorrect! Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-19lockd: document use of mon_id argument in SM_MON requestsChuck Lever
Clean up: document the argument type that xdr_encode_common() is marshalling by introducing a new function. The new function will replace xdr_encode_common() in just a sec. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-19lockd: refactor SM_MON my_id argument encoderChuck Lever
Clean up: introduce a new XDR encoder specifically for the my_id argument of SM_MON requests. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-19lockd: refactor SM_MON mon_name argument encoderChuck Lever
Clean up: introduce a new XDR encoder specifically for the mon_name argument of SM_MON requests. This will be updated later to support IPv6 addresses in addition to IPv4 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-19lockd: Ensure NSM strings aren't longer than protocol allowsChuck Lever
Introduce a special helper function to check the length of NSM strings before they are placed on the wire. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS/SUNRPC: use transport protocol naming\"Talpey, Thomas\
Instead of an { address family, raw IP protocol number }-tuple, use the newly-defined RPC identifier when creating clients in the upper layers. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Kill rpc_clnt->cl_oneshotTrond Myklebust
Replace it with explicit calls to rpc_shutdown_client() or rpc_destroy_client() (for the case of asynchronous calls). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-04-30SUNRPC: RPC buffer size estimates are too largeChuck Lever
The RPC buffer size estimation logic in net/sunrpc/clnt.c always significantly overestimates the requirements for the buffer size. A little instrumentation demonstrated that in fact rpc_malloc was never allocating the buffer from the mempool, but almost always called kmalloc. To compute the size of the RPC buffer more precisely, split p_bufsiz into two fields; one for the argument size, and one for the result size. Then, compute the sum of the exact call and reply header sizes, and split the RPC buffer precisely between the two. That should keep almost all RPC buffers within the 2KiB buffer mempool limit. And, we can finally be rid of RPC_SLACK_SPACE! Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-10-20[PATCH] lockd endianness annotationsAl Viro
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no> Acked-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: export nsm_local_state to user space via sysctlOlaf Kirch
Every NLM call includes the client's NSM state. Currently, the Linux client always reports 0 - which seems not to cause any problems, but is not what the protocol says. This patch exposes the kernel's internal variable to user space via a sysctl, which can be set at system boot time by statd. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: lockd: optionally use hostnames for identifying peersOlaf Kirch
This patch adds the nsm_use_hostnames sysctl and module param. If set, lockd will use the client's name (as given in the NLM arguments) to find the NSM handle. This makes recovery work when the NFS peer is multi-homed, and the reboot notification arrives from a different IP than the original lock calls. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: lockd: make the nsm upcalls use the nsm_handleOlaf Kirch
This converts the statd upcalls to use the nsm_handle This means that we only register each host once with statd, rather than registering each host/vers/protocol triple. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: lockd: introduce nsm_handleOlaf Kirch
This patch introduces the nsm_handle, which is shared by all nlm_host objects referring to the same client. With this patch applied, all nlm_hosts from the same address will share the same nsm_handle. A future patch will add sharing by name. Note: this patch changes h_name so that it is no longer guaranteed to be an IP address of the host. When the host represents an NFS server, h_name will be the name passed in the mount call. When the host represents a client, h_name will be the name presented in the lock request received from the client. A h_name is only used for printing informational messages, this change should not be significant. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] knfsd: hide use of lockd's h_monitored flagOlaf Kirch
This patch moves all checks of the h_monitored flag into the nsm_monitor/unmonitor functions. A subsequent patch will replace the mechanism by which we mark a host as being monitored. There is still one occurence of h_monitored outside of mon.c and that is in clntlock.c where we respond to a reboot. The subsequent patch will modify this too. Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02[PATCH] namespaces: utsname: switch to using uts namespacesSerge E. Hallyn
Replace references to system_utsname to the per-process uts namespace where appropriate. This includes things like uname. Changes: Per Eric Biederman's comments, use the per-process uts namespace for ELF_PLATFORM, sunrpc, and parts of net/ipv4/ipconfig.c [jdike@addtoit.com: UML fix] [clg@fr.ibm.com: cleanup] [akpm@osdl.org: build fix] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>