aboutsummaryrefslogtreecommitdiff
path: root/fs/partitions
AgeCommit message (Collapse)Author
2006-10-17[PATCH] fs/partitions/check: add sysfs error handlingJeff Garzik
Handle errors thrown in disk_sysfs_symlinks(), and propagate back to caller. The callers and associated functions don't do a real good job of handling kobject errors anyway (add_partition, register_disk, rescan_partitions), so this should do until something better comes along. Signed-off-by: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-10[PATCH] fs/partitions endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01[PATCH] fs/partitions: Conversion to generic booleanRichard Knutsson
Conversion of booleans to: generic-boolean.patch (2006-08-23) Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30[PATCH] BLOCK: Make it possible to disable the block layer [try #6]David Howells
Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-29[PATCH] ignore partition table on disks with AIX labelOlaf Hering
The on-disk data structures from AIX are not known, also the filesystem layout is not known. There is a msdos partition signature at the end of the first block, and the kernel recognizes 3 small (and overlapping) partitions. But they are not usable. Maybe the firmware uses it to find the bootloader for AIX, but AIX boots also if the first block is cleared. This is the content of the partition table: # dd if=/dev/sdb count=$(( 4 * 16 )) bs=1 skip=$(( 0x1be )) | xxd 0000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................ 0000010: 80ff ffff 41ff ffff 1b11 0000 381b 0000 ....A.......8... 0000020: 00ff ffff 41ff ffff 0211 0000 1900 0000 ....A........... 0000030: 80ff ffff 41ff ffff 1b11 0000 381b 0000 ....A.......8... Handle the whole disk as empty disk. This fixes also YaST which compares the output from parted (and formerly fdisk) with /proc/partitions. fdisk recognizes the AIX label since a long time, SuSE has a patch for parted to handle the disk label as unknown. dmesg will look like this: sda: [AIX] unknown partition table Tested on an IBM B50 with AIX V4.3.3. Signed-off-by: Olaf Hering <olh@suse.de> Cc: Albert Cahalan <acahalan@gmail.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] fs: Conversions from kmalloc+memset to k(z|c)allocPanagiotis Issaris
Conversions from kmalloc+memset to kzalloc. Signed-off-by: Panagiotis Issaris <takis@issaris.org> Jffs2-bit-acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-26[DISKLABEL] SUN: Fix signed int usage for sector countJeff Mahoney
The current sun disklabel code uses a signed int for the sector count. When partitions larger than 1 TB are used, the cast to a sector_t causes the partition sizes to be invalid: # cat /proc/paritions | grep sdan 66 112 2146435072 sdan 66 115 9223372036853660736 sdan3 66 120 9223372036853660736 sdan8 This patch switches the sector count to an unsigned int to fix this. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-31[PATCH] enable mac partition label per default on pmacOlaf Hering
Enable mac partition table support per default also for a powermac config. Signed-off-by: Olaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] partitions: let partitions inherit policy from diskPeter Oberparleiter
Change the partition code in fs/partitions/check.c to initialize a newly detected partition's policy field with that of the containing block device (see patch below). My reasoning is that function set_disk_ro() in block/genhd.c modifies the policy field (read-only indicator) of a disk and all contained partitions. When a partition is detected after the call to set_disk_ro(), the policy field of this partition will currently not inherit the disk's policy field. This behavior poses a problem in cases where a block device can be 'logically de- and reactivated' like e.g. the s390 DASD driver because partition detection may run after the policy field has been modified. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Acked-by: Al Viro <viro@ftp.linux.org.uk> Makes-sense-to: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26[PATCH] devfs: Remove the devfs_fs_kernel.h file from the treeGreg Kroah-Hartman
Also fixes up all files that #include it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] devfs: Remove devfs_remove() function from the kernel treeGreg Kroah-Hartman
Removes the devfs_remove() function and all callers of it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] devfs: Remove devfs_mk_bdev() function from the kernel treeGreg Kroah-Hartman
Removes the devfs_mk_bdev() function and all callers of it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] devfs: Remove devfs from the partition codeGreg Kroah-Hartman
This patch removes the devfs code from the fs/partitions/ directory. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-23[PATCH] make kernel warn about incorrectly sized partitionsMike Miller
Sometimes partitions claim to be larger than the reported capacity of a disk device. This patch makes the kernel warn about those partitions. We still permit these patitions to be used. Quoting Andries Brouwer <Andries.Brouwer@cwi.nl>: Case 1: The kernel is mistaken about the size of the disk. (There are commands to clip a disk to a certain capacity, there are jumpers to tell a disk that it should report a certain capacity etc. Usually this is because of BIOS bugs. In bad cases the machine will crash in the BIOS and hence fail to boot if the disk reports full capacity.) In such cases actually accessing the blocks of the partition may work fine, or may work fine after running an unclip utility. I wrote "setmax" some years ago precisely for this reason. Case 2: There was a messy partition table (maybe just a rounding error) but the actual filesystem on the partition is contained in the physical disk. Now using the filesystem goes without problem. Case 3: Both partition and filesystem extend beyond the end of the disk. In forensic or debugging situations one often uses a copy of the start of a disk. Now access beyond the end gives an expected I/O error. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Stephen Cameron <steve.cameron@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] read_mapping_page for address spacePekka Enberg
Add read_mapping_page() which is used for callers that pass mapping->a_ops->readpage as the filler for read_cache_page. This removes some duplication from filesystem code. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-21[PATCH] Driver core: add generic "subsystem" link to all devicesKay Sievers
Like the SUBSYTEM= key we find in the environment of the uevent, this creates a generic "subsystem" link in sysfs for every device. Userspace usually doesn't care at all if its a "class" or a "bus" device. This provides an unified way to determine the subsytem of a device, regardless of the way the driver core has created it. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-12Alternative fix for MMC oops on unmount after removalLinus Torvalds
Make sure to clear the driverfs_dev pointer when we do del_gendisk() (on disk removal), so that other users that may still have a ref to the disk won't try to use the stale pointer. Also move the KOBJ_REMOVE uevent handler up, so that the uevent still has access to the driverfs_dev data. This all should hopefully fix the problems with MMC umounts after device removals that caused commit 56cf6504fc1c0c221b82cebc16a444b684140fb7 and its reversal (1a2acc9e9214699a99389e323e6686e9e0e2ca67). Original problem reported by Todd Blumer and others. Acked-by: Greg KH <gregkh@suse.de> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: Erik Mouw <erik@harddisk-recovery.com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: Todd Blumer <todd@sdgsystems.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-17[PATCH] Fix block device symlink nameStephen Rothwell
As noted further on the this file, some block devices have a / in their name, so fix the "block:..." symlink name the same as the /sys/block name. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] BLOCK: delay all uevents until partition table is scannedKay Sievers
[BLOCK] delay all uevents until partition table is scanned Here we delay the annoucement of all block device events until the disk's partition table is scanned and all partition devices are already created and sysfs is populated. We have a bunch of old bugs for removable storage handling where we probe successfully for a filesystem on the raw disk, but at the same time the kernel recognizes a partition table and creates partition devices. Currently there is no sane way to tell if partitions will show up or not at the time the disk device is announced to userspace. With the delayed events we can simply skip any probe for a filesystem on the raw disk when we find already present partitions. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-29Merge ../linux-2.6Paul Mackerras
2006-03-28[PATCH] powerpc: Kill _machine and hard-coded platform numbersBenjamin Herrenschmidt
This removes statically assigned platform numbers and reworks the powerpc platform probe code to use a better mechanism. With this, board support files can simply declare a new machine type with a macro, and implement a probe() function that uses the flattened device-tree to detect if they apply for a given machine. We now have a machine_is() macro that replaces the comparisons of _machine with the various PLATFORM_* constants. This commit also changes various drivers to use the new macro instead of looking at _machine. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27[PATCH] dm-md-dependency-tree-in-sysfs-holders-slaves-subdirectory-tidyAndrew Morton
Remove all the CONFIG_SYSFS stuff. That's supposed to all be implemented up in header files. Yes, the CONFIG_SYSFS=n data structures will be a little larger than necessary, but that's a tradeoff we can decide to make. Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27[PATCH] dm/md dependency tree in sysfs: holders/slaves subdirectoryJun'ichi Nomura
Creating "slaves" and "holders" directories in /sys/block/<disk> and creating "holders" directory under /sys/block/<disk>/<partition> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] sem2mutex: fs/Ingo Molnar
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org> Cc: Robert Love <rml@tech9.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24[PATCH] s390: Remove old history/whitespave from partition codeHorst Hummel
Remove obsolete history and trailing whitespace. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08[PATCH] s390: dasd partition detectionHorst Hummel
DASD allows to open a device as soon as gendisk is registered, which means the device is a fake device (capacity=0) and we do know nothing about blocksize and partitions at that point of time. In case the device is opened by someone, the bdev and inode creation is done with the fake device info and the following partition detection code is just using the wrong data. To avoid this modify the DASD state machine to make sure that the open is rejected until the device analysis is either finished or an unformatted device was detected. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16[PATCH] partitions: Read Rio Karma partition tableBob Copeland
The Rio Karma portable MP3 player has its own proprietary partition table. The partition layout is similar to a DOS boot sector but it begins at a different offset and uses a different magic number (0xAB56 instead of 0xAA55). Add support for it to enable mounting the device. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09[ARM] Make Acorn partition types depend on ACORN_PARTITIONRussell King
balamurugan reported a problem where it was possible to have the various Acorn partition types selected in the configuration, but ACORN_PARTITION disabled. Since ACORN_PARTITION controls whether we build fs/partitions/acorn.c, this lead to undefined references to the adfspart_check_TYPE symbols. Fix this by making the Acorn partition type symbols depend on ACORN_PARTITION. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-06[PATCH] s390: cleanup KconfigMartin Schwidefsky
Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] s390: cms volume label definitionsPeter Oberparleiter
Moved definition of CMS volume label to vtoc.h and modify partitions/ibm.c to use this volume label definition instead of anonymous array. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-04[PATCH] Driver core: Make block devices create the proper symlink nameGreg Kroah-Hartman
Block devices need to add the block device name to the symlink they put in the device directory, otherwise multiple symlinks of the same name can be created. This matches the class system, which works the same way, we just forgot to convert block at the same time. Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] driver core: replace "hotplug" by "uevent"Kay Sievers
Leave the overloaded "hotplug" word to susbsystems which are handling real devices. The driver core does not "plug" anything, it just exports the state to userspace and generates events. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-12-22[SPARC]: introduce a SPARC Kconfig symbolAdrian Bunk
Introduce a Kconfig symbol SPARC that is defined on both the sparc and sparc64 architectures. This symbol makes some dependencies more readable. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08fs/partitions/ultrix.c should #include "ultrix.h"Adrian Bunk
Every file should #include the headers containing the prototypes for it's global functions. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2005-11-07[PATCH] s390: cleanup of include/asm-s390/vtoc.hPeter Oberparleiter
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01[BLOCK] Unify the seperate read/write io stat fields into arraysJens Axboe
Instead of having ->read_sectors and ->write_sectors, combine the two into ->sectors[2] and similar for the other fields. This saves a branch several places in the io path, since we don't have to care for what the actual io direction is. On my x86-64 box, that's 200 bytes less text in just the core (not counting the various drivers). Signed-off-by: Jens Axboe <axboe@suse.de>
2005-10-28Merge ../bleed-2.6Greg KH
2005-10-28[PATCH] add sysfs attr to re-emit device hotplug eventKay Sievers
A "coldplug + udevstart" can be simple like this: for i in /sys/block/*/*/uevent; do echo 1 > $i; done for i in /sys/class/*/*/uevent; do echo 1 > $i; done for i in /sys/bus/*/devices/*/uevent; do echo 1 > $i; done Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[patch] remove gendisk->stamp_idle fieldChen, Kenneth W
struct gendisk has these two fields: stamp, stamp_idle. Update to stamp_idle is always in sync with stamp and they are always the same. Therefore, it does not add any value in having two fields tracking same timestamp. Suggest to remove it. Also, we should only update gendisk stats with non-zero value. Advantage is that we don't have to needlessly calculate memory address, and then add zero to the content. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2005-06-25[PATCH] small partitions/msdos cleanupsAdrian Bunk
This patch makes the following changes to the msdos partition code: - remove CONFIG_NEC98_PARTITION leftovers - make parse_bsd static This patch was already ACK'ed by Andries Brouwer. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-06[PATCH] revert msdos partitioning fixAndrew Morton
This change from March 3rd causes the partition parsing code to ignore partitions which have a signature byte of zero. Turns out that more people have such partitions than we expected, and their device numbering is coming up wrong in post-2.6.11 kernels. So revert the change while we think about the problem a bit more. Cc: Andries Brouwer <Andries.Brouwer@cwi.nl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-18[PATCH] kobject/hotplug split - block corekay.sievers@vrfy.org
kobject_add() and kobject_del() don't emit hotplug events anymore. Do it ourselves if we are finished populating the device directory. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!