aboutsummaryrefslogtreecommitdiff
path: root/fs/xfs
AgeCommit message (Collapse)Author
2008-03-06[XFS] fix inode leak in xfs_iget_core()David Chinner
If the radix_tree_preload() fails, we need to destroy the inode we just read in before trying again. This could leak xfs_vnode structures when there is memory pressure. Noticed by Christoph Hellwig. SGI-PV: 977823 SGI-Modid: xfs-linux-melb:xfs-kern:30606a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-03-06[XFS] 977545 977545 977545 977545 977545 977545 xfsaild causing too manyDavid Chinner
wakeups Idle state is not being detected properly by the xfsaild push code. The current idle state is detected by an empty list which may never happen with mostly idle filesystem or one using lazy superblock counters. A single dirty item in the list that exists beyond the push target can result repeated looping attempting to push up to the target because it fails to check if the push target has been acheived or not. Fix by considering a dirty list with everything past the target as an idle state and set the timeout appropriately. SGI-PV: 977545 SGI-Modid: xfs-linux-melb:xfs-kern:30532a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-28[XFS] If you mount an XFS filesystem with no mount options at all, thenJosef Jeff Sipek
the "ikeep" option is set rather than "noikeep". This regression was introduced in 970451. With no mount options specified, xfs_parseargs() does the following: int ikeep = 0; args->flags |= XFSMNT_BARRIER; args->flags2 |= XFSMNT2_COMPAT_IOSIZE; if (!options) goto done; It only sets the above two options by default and before, it also used to set XFSMNT_IDELETE by default. If options are specified, then if (!(args->flags & XFSMNT_DMAPI) && !ikeep) args->flags |= XFSMNT_IDELETE; is executed later on which is skipped by the "goto done;" above. The solution is to invert the logic. SGI-PV: 977771 SGI-Modid: xfs-linux-melb:xfs-kern:30590a Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-26[XFS] Undo bit ops cleanup mod due to regression on 32-bit powermacLachlan McIlroy
platform. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30559a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-26[XFS] Undo bit ops cleanup mod due to regression on 32-bit powermacLachlan McIlroy
platform. SGI-PV: 974005 SGI-Modid: xfs-linux-melb:xfs-kern:30558a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-22Remove empty file fs/xfs/Makefile-linux-2.6.Lachlan McIlroy
2008-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into ↵Lachlan McIlroy
for-linus
2008-02-18[XFS] Added quota targets and removed dmapi directoryLachlan McIlroy
Fixes build failures introduced by bad merge to mainline.
2008-02-18[XFS] Fix up xfs out-of-tree builds. (a.k.a. external modules)Eric Sandeen
Change -I include directives to find headers in the out-of-tree spot. This allows a directory containing only xfs files to be built as: SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29878a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-18[XFS] Remove Makefile wrappers in XFSAndi Kleen
Makefile (and Kbuild) would include Makefile-linux-26 I doubt XFS will really still compile on 2.4; so drop that. This moves Makefile-linux-26 into Makefile and drops Kbuild. Also having wrappers as both Kbuild and Makefile seemed redundant anyways. The patch is relatively large because it renames a file, but no functional changes. SGI-PV: 971050 SGI-Modid: xfs-linux-melb:xfs-kern:29781a Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-14Introduce path_put()Jan Blunck
* Add path_put() functions for releasing a reference to the dentry and vfsmount of a struct path in the right order * Switch from path_release(nd) to path_put(&nd->path) * Rename dput_path() to path_put_conditional() [akpm@linux-foundation.org: fix cifs] Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Cc: <linux-fsdevel@vger.kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14Embed a struct path into struct nameidata instead of nd->{dentry,mnt}Jan Blunck
This is the central patch of a cleanup series. In most cases there is no good reason why someone would want to use a dentry for itself. This series reflects that fact and embeds a struct path into nameidata. Together with the other patches of this series - it enforced the correct order of getting/releasing the reference count on <dentry,vfsmount> pairs - it prepares the VFS for stacking support since it is essential to have a struct path in every place where the stack can be traversed - it reduces the overall code size: without patch series: text data bss dec hex filename 5321639 858418 715768 6895825 6938d1 vmlinux with patch series: text data bss dec hex filename 5320026 858418 715768 6894212 693284 vmlinux This patch: Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix cifs] [akpm@linux-foundation.org: fix smack] Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-13xfs: convert beX_add to beX_add_cpu (new common API)Marcin Slusarz
remove beX_add functions and replace all uses with beX_add_cpu Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Reviewed-by: Dave Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: (62 commits) [XFS] add __init/__exit mark to specific init/cleanup functions [XFS] Fix oops in xfs_file_readdir() [XFS] kill xfs_root [XFS] keep i_nlink updated and use proper accessors [XFS] stop updating inode->i_blocks [XFS] Make xfs_ail_check check less by default [XFS] Move AIL pushing into it's own thread [XFS] use generic_permission [XFS] stop re-checking permissions in xfs_swapext [XFS] clean up xfs_swapext [XFS] remove permission check from xfs_change_file_space [XFS] prevent panic during log recovery due to bogus op_hdr length [XFS] Cleanup various fid related bits: [XFS] Fix xfs_lowbit64 [XFS] Remove CFORK macros and use code directly in IFORK and DFORK macros. [XFS] kill superflous buffer locking (2nd attempt) [XFS] Use kernel-supplied "roundup_pow_of_two" for simplicity [XFS] Remove the BPCSHIFT and NB* based macros from XFS. [XFS] Remove bogus assert [XFS] optimize XFS_IS_REALTIME_INODE w/o realtime config ...
2008-02-07[XFS] add __init/__exit mark to specific init/cleanup functionsLachlan McIlroy
SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30459a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Denis Cheng <crquan@gmail.com>
2008-02-07[XFS] Fix oops in xfs_file_readdir()David Chinner
When xfs_file_readdir() exactly fills a buffer, it can move it's index past the end of the buffer and dereference it even though the result of the dereference is never used. On some platforms this causes an oops. SGI-PV: 976923 SGI-Modid: xfs-linux-melb:xfs-kern:30458a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] kill xfs_rootChristoph Hellwig
The only caller (xfs_fs_fill_super) can simplify call igrab on the root inode. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30393a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] keep i_nlink updated and use proper accessorsChristoph Hellwig
To get the read-only bind mounts in -mm to work correctly with XFS we need to call the drop_nlink and inc_nlink helpers to monitor the link count. Add calls to these to xfs_bumplink and xfs_droplink and stop copying over di_nlink to i_nlink in xfs_validate_fields and vn_revalidate. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30392a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] stop updating inode->i_blocksChristoph Hellwig
The VFS doesn't use i_blocks, it's only used by generic_fillattr and the generic quota code which XFS doesn't use. In XFS there is one use to check whether we have an inline or out of line sumlink, but we can replace that with a check of the XFS_IFINLINE inode flag. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30391a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Make xfs_ail_check check less by defaultDavid Chinner
Checking the entire AIL on every insert and remove is prohibitively expensive - the sustained sequntial create rate on a single disk drops from about 1800/s to 60/s because of this checking resulting in the xfslogd becoming cpu bound. By default on debug builds, only check the next and previous entries in the list to ensure they are ordered correctly. If you really want, define XFS_TRANS_DEBUG to use the old behaviour. SGI-PV: 972759 SGI-Modid: xfs-linux-melb:xfs-kern:30372a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Move AIL pushing into it's own threadDavid Chinner
When many hundreds to thousands of threads all try to do simultaneous transactions and the log is in a tail-pushing situation (i.e. full), we can get multiple threads walking the AIL list and contending on the AIL lock. The AIL push is, in effect, a simple I/O dispatch algorithm complicated by the ordering constraints placed on it by the transaction subsystem. It really does not need multiple threads to push on it - even when only a single CPU is pushing the AIL, it can push the I/O out far faster that pretty much any disk subsystem can handle. So, to avoid contention problems stemming from multiple list walkers, move the list walk off into another thread and simply provide a "target" to push to. When a thread requires a push, it sets the target and wakes the push thread, then goes to sleep waiting for the required amount of space to become available in the log. This mechanism should also be a lot fairer under heavy load as the waiters will queue in arrival order, rather than queuing in "who completed a push first" order. Also, by moving the pushing to a separate thread we can do more effectively overload detection and prevention as we can keep context from loop iteration to loop iteration. That is, we can push only part of the list each loop and not have to loop back to the start of the list every time we run. This should also help by reducing the number of items we try to lock and/or push items that we cannot move. Note that this patch is not intended to solve the inefficiencies in the AIL structure and the associated issues with extremely large list contents. That needs to be addresses separately; parallel access would cause problems to any new structure as well, so I'm only aiming to isolate the structure from unbounded parallelism here. SGI-PV: 972759 SGI-Modid: xfs-linux-melb:xfs-kern:30371a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] use generic_permissionChristoph Hellwig
Now that all direct caller of xfs_iaccess are gone we can kill xfs_iaccess and xfs_access and just use generic_permission with a check_acl callback. This is required for the per-mount read-only patchset in -mm to work properly with XFS. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30370a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] stop re-checking permissions in xfs_swapextChristoph Hellwig
xfs_swapext should simplify check if we have a writeable file descriptor instead of re-checking the permissions using xfs_iaccess. Add an additional check to refuse O_APPEND file descriptors because swapext is not an append-only write operation. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30369a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] clean up xfs_swapextChristoph Hellwig
- stop using vnodes - use proper multiple label goto unwinding - give the struct file * variables saner names SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30366a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] remove permission check from xfs_change_file_spaceChristoph Hellwig
Both callers of xfs_change_file_space alreaedy do the file->f_mode & FMODE_WRITE check to ensure we have a file descriptor that has been opened for write mode, so there is no need to re-check that with xfs_iaccess. Especially as the later might wrongly deny it for corner cases like file descriptor passing through unix domain sockets. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30365a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] prevent panic during log recovery due to bogus op_hdr lengthLachlan McIlroy
A problem was reported where a system panicked in log recovery due to a corrupt log record. The cause of the corruption is not known but this change will at least prevent a crash for this specific scenario. Log recovery definitely needs some more work in this area. SGI-PV: 974151 SGI-Modid: xfs-linux-melb:xfs-kern:30318a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-02-07[XFS] Cleanup various fid related bits:Christoph Hellwig
- merge xfs_fid2 into it's only caller xfs_dm_inode_to_fh. - remove xfs_vget and opencode it in the two callers, simplifying both of them by avoiding the awkward calling convetion. - assign directly to the dm_fid_t members in various places in the dmapi code instead of casting them to xfs_fid_t first (which is identical to dm_fid_t) SGI-PV: 974747 SGI-Modid: xfs-linux-melb:xfs-kern:30258a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Vlad Apostolov <vapo@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Fix xfs_lowbit64David Chinner
xfs_lowbit64 was broken on 32 bit platforms in a recent cleanup of the xfs bitops. Fix it back up again. SGI-PV: 974005 SGI-Modid: xfs-linux-melb:xfs-kern:30202a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Remove CFORK macros and use code directly in IFORK and DFORK macros.Christoph Hellwig
Currently XFS_IFORK_* and XFS_DFORK* are implemented by means of XFS_CFORK* macros. But given that XFS_IFORK_* operates on an xfs_inode that embedds and xfs_icdinode_core and XFS_DFORK_* operates on an xfs_dinode that embedds a xfs_dinode_core one will have to do endian swapping while the other doesn't. Instead of having the current mess with the CFORK macros that have byteswapping and non-byteswapping version (which are inconsistantly named while we're at it) just define each family of the macros to stand by itself and simplify the whole matter. A few direct references to the CFORK variants were cleaned up to use IFORK or DFORK to make this possible. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30163a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] kill superflous buffer locking (2nd attempt)Christoph Hellwig
There is no need to lock any page in xfs_buf.c because we operate on our own address_space and all locking is covered by the buffer semaphore. If we ever switch back to main blockdeive address_space as suggested e.g. for fsblock with a similar scheme the locking will have to be totally revised anyway because the current scheme is neither correct nor coherent with itself. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30156a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Use kernel-supplied "roundup_pow_of_two" for simplicityRobert P. J. Day
SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30098a Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Remove the BPCSHIFT and NB* based macros from XFS.Tim Shimmin
The BPCSHIFT based macros, btoc*, ctob*, offtoc* and ctooff are either not used or don't need to be used. The NDPP, NDPP, NBBY macros don't need to be used but instead are replaced directly by PAGE_SIZE and PAGE_CACHE_SIZE where appropriate. Initial patch and motivation from Nicolas Kaiser. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30096a Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Remove bogus assertNiv Sardi
This assert is bogus. We can have a forced shutdown occur between the check for the XLOG_FORCED_SHUTDOWN and the ASSERT. Also, the logging system shouldn't care about the state of XFS_FORCED_SHUTDOWN, it should only check XLOG_FORCED_SHUTDOWN. The logging system has it's own forced shutdown flag so, for the case of a forced shutdown that's not due to a logging error, we can flush the log. SGI-PV: 972985 SGI-Modid: xfs-linux-melb:xfs-kern:30029a Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] optimize XFS_IS_REALTIME_INODE w/o realtime configEric Sandeen
Use XFS_IS_REALTIME_INODE in more places, and #define it to 0 if CONFIG_XFS_RT is off. This should be safe because mount checks in xfs_rtmount_init: so if we get mounted w/o CONFIG_XFS_RT, no realtime inodes should be encountered after that. Defining XFS_IS_REALTIME_INODE to 0 saves a bit of stack space, presumeably gcc can optimize around the various "if (0)" type checks: xfs_alloc_file_space -8 xfs_bmap_adjacent -16 xfs_bmapi -8 xfs_bmap_rtalloc -16 xfs_bunmapi -28 xfs_free_file_space -64 xfs_imap +8 <-- ? hmm. xfs_iomap_write_direct -12 xfs_qm_dqusage_adjust -4 xfs_qm_vop_chown_reserve -4 SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30014a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Move platform specific mount option parse out of core XFS codeDavid Chinner
Mount option parsing is platform specific. Move it out of core code into the platform specific superblock operation file. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30012a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Implement fallocate.David Chinner
Implement the new generic callout for file preallocation. Atomically change the file size if requested. SGI-PV: 972756 SGI-Modid: xfs-linux-melb:xfs-kern:30009a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Fix inode allocation latencyDavid Chinner
The log force added in xfs_iget_core() has been a performance issue since it was introduced for tight loops that allocate then unlink a single file. under heavy writeback, this can introduce unnecessary latency due tothe log I/o getting stuck behind bulk data writes. Fix this latency problem by avoinding the need for the log force by moving the place we mark linux inode dirty to the transaction commit rather than on transaction completion. This also closes a potential hole in the sync code where a linux inode is not dirty between the time it is modified and the time the log buffer has been written to disk. SGI-PV: 972753 SGI-Modid: xfs-linux-melb:xfs-kern:30007a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Fix transaction overrun during writeback.David Chinner
Prevent transaction overrun in xfs_iomap_write_allocate() if we race with a truncate that overlaps the delalloc range we were planning to allocate. If we race, we may allocate into a hole and that requires block allocation. At this point in time we don't have a reservation for block allocation (apart from metadata blocks) and so allocating into a hole rather than a delalloc region results in overflowing the transaction block reservation. Fix it by only allowing a single extent to be allocated at a time. SGI-PV: 972757 SGI-Modid: xfs-linux-melb:xfs-kern:30005a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Show all mount args in /proc/mountsDavid Chinner
There are several mount options that don't show up in /proc/mounts. Add them in and clean up the showargs code at the same time. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30004a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Fix sparse warning in xlog_recover_do_efd_trans.David Chinner
Sparse trips over the locking order in xlog_recover_do_efd_trans() when xfs_trans_delete_ail() drops the ail lock. Because the unlock is conditional, we need to either annotate with a "fake unlock" or change the structure of the code so sparse thinks the function always unlocks. Reordering the code makes it simpler, so do that. SGI-PV: 972755 SGI-Modid: xfs-linux-melb:xfs-kern:30003a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Fix up sparse warnings.David Chinner
These are mostly locking annotations, marking things static, casts where needed and declaring stuff in header files. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30002a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Use the generic bitops rather than implementing them ourselves.David Chinner
Patch inspired by Andi Kleen. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30000a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] Make xfs_bulkstat() to report unlinked but referenced inodesVlad Apostolov
We need xfs_bulkstat() to report inode stat for inodes with link count zero but reference count non zero. The fix here: http://oss.sgi.com/archives/xfs/2007-09/msg00266.html changed this behavior and made xfs_bulkstat() to filter all unlinked inodes including those that are not destroyed yet but held by reference. The attached patch returns back to the original behavior by marking the on-disk inode buffer "dirty" when di_mode is cleared (at that time both inode link and reference counter are zero). SGI-PV: 972004 SGI-Modid: xfs-linux-melb:xfs-kern:29914a Signed-off-by: Vlad Apostolov <vapo@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] 971186 Undo mod xfs-linux-melb:xfs-kern:29845a due to a regressionLachlan McIlroy
SGI-PV: 971596 SGI-Modid: xfs-linux-melb:xfs-kern:29902a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07[XFS] fix 32-bit compat ioctls for GETXFLAGS, SETXFLAGS, GETVERSIONEric Sandeen
XFS_IOC_GETVERSION, XFS_IOC_GETXFLAGS and XFS_IOC_SETXFLAGS all take a "long" which changes size between 32 and 64 bit platforms. So, the ioctl cmds that come in from a 32-bit app aren't as expected, for example on GETXFLAGS, unknown cmd fd(3) cmd(80046601){t:'f';sz:4} due to the size mismatch. So, use instead the 32-bit version of the commands for compat ioctls, and other than that it doesn't take any more manipulation. Also, for both native and compat versions, just define them to the values as defined in fs.h SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29849a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2008-02-07[XFS] lose xfs_hex_dump in favor of print_hex_dumpEric Sandeen
No need for xfs to have its own hex dumping routine now that the kernel has one. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29847a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2008-02-07[XFS] kill XFS_INOBT_IS_FREE_DISKChristoph Hellwig
This macro is unused an all other acros in this family operate on native types, so we most likely won't grow a user either. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29846a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2008-02-07[XFS] kill superflous buffer lockingChristoph Hellwig
There is no need to lock any page in xfs_buf.c because we operate on our own address_space and all locking is covered by the buffer semaphore. If we ever switch back to main blockdeive address_space as suggested e.g. for fsblock with a similar scheme the locking will have to be totally revised anyway because the current scheme is neither correct nor coherent with itself. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29845a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2008-02-07[XFS] Refactor xfs_mountfsEric Sandeen
Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2008-02-07[XFS] xlog_rec_header/xlog_rec_ext_header endianess annotationsChristoph Hellwig
Mostly trivial conversion with one exceptions: h_num_logops was kept in native endian previously and only converted to big endian in xlog_sync, but we always keep it big endian now. With todays cpus fast byteswap instructions that's not an issue but the new variant keeps the code clean and maintainable. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29821a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>