aboutsummaryrefslogtreecommitdiff
path: root/fs/xfs
AgeCommit message (Collapse)Author
2007-07-14[XFS] Fix the transaction flags to make lazy superblock counters work.David Chinner
SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28653a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Lazy Superblock CountersDavid Chinner
When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Use generic shrinker interfaces in XFS.Andrew Morton
SGI-PV: 964986 SGI-Modid: xfs-linux-melb:xfs-kern:28642a Signed-Off-By: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Make hole punching at EOF atomic.David Chinner
If hole punching at EOF is done as two steps (i.e. truncate then extend) the file is in a transient state between the two steps where an application can see the incorrect file size. Punching a hole to EOF needs to be treated in teh same way as all other hole punching cases so that the file size is never seen to change. SGI-PV: 962012 SGI-Modid: xfs-linux-melb:xfs-kern:28641a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Vlad Apostolov <vapo@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Fix vmalloc leak on mount/unmount.David Chinner
When setting the length of the iclogbuf to write out we should just be changing the desired byte count rather completely reassociating the buffer memory with the buffer. Reassociating the buffer memory changes the apparent length of the buffer and hence when we free the buffer, we don't free all the vmap()d space we originally allocated. SGI-PV: 964983 SGI-Modid: xfs-linux-melb:xfs-kern:28640a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Fix double free in xfs_buf_get_noaddr error handling pathChristoph Hellwig
SGI-PV: 964983 SGI-Modid: xfs-linux-melb:xfs-kern:28639a Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Fix use-after-free during log unmount.David Chinner
Don't reference the log buffer after running the callbacks as the callback can trigger the log buffers to be freed during unmount. SGI-PV: 964545 SGI-Modid: xfs-linux-melb:xfs-kern:28567a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Sleeping with the ilock waiting for I/O completion is Bad.David Chinner
Recent fixes to the filesystem freezing code introduced a vn_iowait call in the middle of the sync code. Unfortunately, at the point where this call was added we are holding the ilock. The ilock is needed by I/O completion for unwritten extent conversion and now updating the file size. Hence I/o cannot complete if we hold the ilock while waiting for I/O completion. Fix up the bug and clean the code up around it. SGI-PV: 963674 SGI-Modid: xfs-linux-melb:xfs-kern:28566a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Don't grow filesystems past the size they can index.Nathan Scott
When growing a filesystem we don't check to see if the new size overflows the page cache index range, so we can do silly things like grow a filesystem page 16TB on a 32bit. Check new filesystem sizes against the limits the kernel can support. SGI-PV: 957886 SGI-Modid: xfs-linux-melb:xfs-kern:28563a Signed-Off-By: Nathan Scott <nscott@aconex.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Only use refcounted pages for I/OChristoph Hellwig
Many block drivers (aoe, iscsi) really want refcountable pages in bios, which is what almost everyone send down. XFS unfortunately has a few places where it sends down buffers that may come from kmalloc, which breaks them. Fix the places that use kmalloc()d buffers. SGI-PV: 964546 SGI-Modid: xfs-linux-melb:xfs-kern:28562a Signed-Off-By: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-10sendfile: remove .sendfile from filesystems that use generic_file_sendfile()Jens Axboe
They can use generic_file_splice_read() instead. Since sys_sendfile() now prefers that, there should be no change in behaviour. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-06-19[XFS] s/memclear_highpage_flush/zero_user_page/Christoph Hellwig
SGI-PV: 957103 SGI-Modid: xfs-linux-melb:xfs-kern:28678a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-29[XFS] Write at EOF may not update filesize correctly.David Chinner
The recent fix for preventing NULL files from being left around does not update the file size corectly in all cases. The missing case is a write extending the file that does not need to allocate a block. In that case we used a read mapping of the extent which forced the use of the read I/O completion handler instead of the write I/O completion handle. Hence the file size was not updated on I/O completion. SGI-PV: 965068 SGI-Modid: xfs-linux-melb:xfs-kern:28657a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Nathan Scott <nscott@aconex.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-17Remove SLAB_CTOR_CONSTRUCTORChristoph Lameter
SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: David Howells <dhowells@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@ucw.cz> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits) sound: convert "sound" subdirectory to UTF-8 MAINTAINERS: Add cxacru website/mailing list include files: convert "include" subdirectory to UTF-8 general: convert "kernel" subdirectory to UTF-8 documentation: convert the Documentation directory to UTF-8 Convert the toplevel files CREDITS and MAINTAINERS to UTF-8. remove broken URLs from net drivers' output Magic number prefix consistency change to Documentation/magic-number.txt trivial: s/i_sem /i_mutex/ fix file specification in comments drivers/base/platform.c: fix small typo in doc misc doc and kconfig typos Remove obsolete fat_cvf help text Fix occurrences of "the the " Fix minor typoes in kernel/module.c Kconfig: Remove reference to external mqueue library Kconfig: A couple of grammatical fixes in arch/i386/Kconfig Correct comments in genrtc.c to refer to correct /proc file. Fix more "deprecated" spellos. Fix "deprecated" typoes. ... Fix trivial comment conflict in kernel/relay.c.
2007-05-09Add suspend-related notifications for CPU hotplugRafael J. Wysocki
Since nonboot CPUs are now disabled after tasks and devices have been frozen and the CPU hotplug infrastructure is used for this purpose, we need special CPU hotplug notifications that will help the CPU-hotplug-aware subsystems distinguish normal CPU hotplug events from CPU hotplug events related to a system-wide suspend or resume operation in progress. This patch introduces such notifications and causes them to be used during suspend and resume transitions. It also changes all of the CPU-hotplug-aware subsystems to take these notifications into consideration (for now they are handled in the same way as the corresponding "normal" ones). [oleg@tv-sign.ru: cleanups] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09Fix occurrences of "the the "Michael Opdenacker
Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-08Merge git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds
* git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Add lockdep support for XFS [XFS] Fix race in xfs_write() b/w dmapi callout and direct I/O checks. [XFS] Get rid of redundant "required" in msg. [XFS] Export via a function xfs_buftarg_list for use by kdb/xfsidbg. [XFS] Remove unused ilen variable and references. [XFS] Fix to prevent the notorious 'NULL files' problem after a crash. [XFS] Fix race condition in xfs_write(). [XFS] Fix uquota and oquota enforcement problems. [XFS] propogate return codes from flush routines [XFS] Fix quotaon syscall failures for group enforcement requests. [XFS] Invalidate quotacheck when mounting without a quota type. [XFS] reducing the number of random number functions. [XFS] remove more misc. unused args [XFS] the "aendp" arg to xfs_dir2_data_freescan is always NULL, remove it. [XFS] The last argument "lsn" of xfs_trans_commit() is always called with
2007-05-08mm: move common segment checks to separate helper functionDmitriy Monakhov
[akpm@linux-foundation.org: cleanup] Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org> Cc: Christoph Hellwig <hch@lst.de> Acked-by: Anton Altaparmakov <aia21@cam.ac.uk> Acked-by: David Chinner <dgc@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08[XFS] Add lockdep support for XFSLachlan McIlroy
SGI-PV: 963965 SGI-Modid: xfs-linux-melb:xfs-kern:28485a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08[XFS] Fix race in xfs_write() b/w dmapi callout and direct I/O checks.Lachlan McIlroy
In xfs_write() the iolock is dropped and reacquired in XFS_SEND_DATA() which means that the file could change from not-cached to cached and we need to redo the direct I/O checks. We should also redo the direct I/O checks when the file size changes regardless if O_APPEND is set or not. SGI-PV: 963483 SGI-Modid: xfs-linux-melb:xfs-kern:28440a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08[XFS] Get rid of redundant "required" in msg.Utako Kusaka
SGI-PV: 963466 SGI-Modid: xfs-linux-melb:xfs-kern:28416a Signed-off-by: Utako Kusaka <utako@tnes.nec.co.jp> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2007-05-08[XFS] Export via a function xfs_buftarg_list for use by kdb/xfsidbg.Tim Shimmin
SGI-PV: 963465 SGI-Modid: xfs-linux-melb:xfs-kern:28414a Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2007-05-08[XFS] Remove unused ilen variable and references.Tim Shimmin
SGI-PV: 907752 SGI-Modid: xfs-linux-melb:xfs-kern:28344a Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
2007-05-08[XFS] Fix to prevent the notorious 'NULL files' problem after a crash.Lachlan McIlroy
The problem that has been addressed is that of synchronising updates of the file size with writes that extend a file. Without the fix the update of a file's size, as a result of a write beyond eof, is independent of when the cached data is flushed to disk. Often the file size update would be written to the filesystem log before the data is flushed to disk. When a system crashes between these two events and the filesystem log is replayed on mount the file's size will be set but since the contents never made it to disk the file is full of holes. If some of the cached data was flushed to disk then it may just be a section of the file at the end that has holes. There are existing fixes to help alleviate this problem, particularly in the case where a file has been truncated, that force cached data to be flushed to disk when the file is closed. If the system crashes while the file(s) are still open then this flushing will never occur. The fix that we have implemented is to introduce a second file size, called the in-memory file size, that represents the current file size as viewed by the user. The existing file size, called the on-disk file size, is the one that get's written to the filesystem log and we only update it when it is safe to do so. When we write to a file beyond eof we only update the in- memory file size in the write operation. Later when the I/O operation, that flushes the cached data to disk completes, an I/O completion routine will update the on-disk file size. The on-disk file size will be updated to the maximum offset of the I/O or to the value of the in-memory file size if the I/O includes eof. SGI-PV: 958522 SGI-Modid: xfs-linux-melb:xfs-kern:28322a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08[XFS] Fix race condition in xfs_write().Lachlan McIlroy
This change addresses a race in xfs_write() where, for direct I/O, the flags need_i_mutex and need_flush are setup before the iolock is acquired. The logic used to setup the flags may change between setting the flags and acquiring the iolock resulting in these flags having incorrect values. For example, if a file is not currently cached then need_i_mutex is set to zero and then if the file is cached before the iolock is acquired we will fail to do the flushinval before the direct write. The flush (and also the call to xfs_zero_eof()) need to be done with the iolock held exclusive so we need to acquire the iolock before checking for cached data (or if the write begins after eof) to prevent this state from changing. For direct I/O I've chosen to always acquire the iolock in shared mode initially and if there is a need to promote it then drop it and reacquire it. There's also some other tidy-ups including removing the O_APPEND offset adjustment since that work is done in generic_write_checks() (and we don't use offset as an input parameter anywhere). SGI-PV: 962170 SGI-Modid: xfs-linux-melb:xfs-kern:28319a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08[XFS] Fix uquota and oquota enforcement problems.Kouta Ooizumi
When uquota and oquota (gquota/pquota) are enabled for accounting both are enforced if ether has enforcement active. Conditions: - Both XFS_UQUOTA_ACCT and XFS_GQUOTA_ACCT are enabled. - Either XFS_UQUOTA_ENFD or XFS_OQUOTA_ENFD is enabled. - The usage without enforce is reached at the soft limit. Problems: 1. "repquota" shows all grace time even if no enforcement. 2. we cannot make a file over a hard limits even if no enforcement. SGI-PV: 962291 SGI-Modid: xfs-linux-melb:xfs-kern:28272a Signed-off-by: Kouta Ooizumi <k-ooizumi@tnes.nec.co.jp> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08[XFS] propogate return codes from flush routinesLachlan McIlroy
This patch handles error return values in fs_flush_pages and fs_flushinval_pages. It changes the prototype of fs_flushinval_pages so we can propogate the errors and handle them at higher layers. I also modified xfs_itruncate_start so that it could propogate the error further. SGI-PV: 961990 SGI-Modid: xfs-linux-melb:xfs-kern:28231a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Stewart Smith <stewart@flamingspork.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08[XFS] Fix quotaon syscall failures for group enforcement requests.Donald Douwsma
xfs_qm_scall_quotaon was incorrectly failing requests to enable group quota enforcement. Fixes logic error in OQUOTA handling. SGI-PV: 961964 SGI-Modid: xfs-linux-melb:xfs-kern:28227a Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08[XFS] Invalidate quotacheck when mounting without a quota type.Donald Douwsma
When quotas are mounted or remounted without a particular quota type the quota accounting for that type becomes invalid. Previously we were ignoring this leading to accounting errors. SGI-PV: 961964 SGI-Modid: xfs-linux-melb:xfs-kern:28225a Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Utako Kusaka <utako@tnes.nec.co.jp> Signed-off-by: Vlad Apostolov <vapo@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08[XFS] reducing the number of random number functions.Joe Perches
Patch provided by Joe Perches SGI-PV: 961696 SGI-Modid: xfs-linux-melb:xfs-kern:28209a Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08[XFS] remove more misc. unused argsEric Sandeen
Patch provided by Eric Sandeen. SGI-PV: 961695 SGI-Modid: xfs-linux-melb:xfs-kern:28205a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08[XFS] the "aendp" arg to xfs_dir2_data_freescan is always NULL, remove it.Eric Sandeen
Patch provided by Eric Sandeen. SGI-PV: 961694 SGI-Modid: xfs-linux-melb:xfs-kern:28204a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08[XFS] The last argument "lsn" of xfs_trans_commit() is always called withEric Sandeen
NULL. Patch provided by Eric Sandeen. SGI-PV: 961693 SGI-Modid: xfs-linux-melb:xfs-kern:28199a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-07slab allocators: Remove SLAB_DEBUG_INITIAL flagChristoph Lameter
I have never seen a use of SLAB_DEBUG_INITIAL. It is only supported by SLAB. I think its purpose was to have a callback after an object has been freed to verify that the state is the constructor state again? The callback is performed before each freeing of an object. I would think that it is much easier to check the object state manually before the free. That also places the check near the code object manipulation of the object. Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was compiled with SLAB debugging on. If there would be code in a constructor handling SLAB_DEBUG_INITIAL then it would have to be conditional on SLAB_DEBUG otherwise it would just be dead code. But there is no such code in the kernel. I think SLUB_DEBUG_INITIAL is too problematic to make real use of, difficult to understand and there are easier ways to accomplish the same effect (i.e. add debug code before kfree). There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be clear in fs inode caches. Remove the pointless checks (they would even be pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors. This is the last slab flag that SLUB did not support. Remove the check for unimplemented flags from SLUB. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-22[PATCH] Make XFS workqueues nonfreezableRafael J. Wysocki
Since freezable workqueues are broken in 2.6.21-rc (cf. http://marc.theaimsgroup.com/?l=linux-kernel&m=116855740612755, http://marc.theaimsgroup.com/?l=linux-kernel&m=117261312523921&w=2) it's better to change the only user of them, which is XFS, to use "normal" nonfreezable workqueues. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: David Chinner <dgc@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] xfs warning fixAndrew Morton
fs/xfs/linux-2.6/xfs_super.c:903: warning: 'noinline' attribute ignored Cc: David Chinner <dgc@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: remove insert_at_head from register_sysctlEric W. Biederman
The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] mark struct inode_operations const 3Arjan van de Ven
Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Make XFS use BH_Unwritten and BH_Delay correctlyDavid Chinner
Don't hide buffer_unwritten behind buffer_delay() and remove the hack that clears unexpected buffer_unwritten() states now that it can't happen. Signed-off-by: Dave Chinner <dgc@sgi.com> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Timothy Shimmin <tes@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Make BH_Unwritten a first class bufferhead flag V2David Chinner
Currently, XFS uses BH_PrivateStart for flagging unwritten extent state in a bufferhead. Recently, I found the long standing mmap/unwritten extent conversion bug, and it was to do with partial page invalidation not clearing the unwritten flag from bufferheads attached to the page but beyond EOF. See here for a full explaination: http://oss.sgi.com/archives/xfs/2006-12/msg00196.html The solution I have checked into the XFS dev tree involves duplicating code from block_invalidatepage to clear the unwritten flag from the bufferhead(s), and then calling block_invalidatepage() to do the rest. Christoph suggested that this would be better solved by pushing the unwritten flag into the common buffer head flags and just adding the call to discard_buffer(): http://oss.sgi.com/archives/xfs/2006-12/msg00239.html The following patch makes BH_Unwritten a first class citizen. Signed-off-by: Dave Chinner <dgc@sgi.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10[XFS] Don't use kmap in xfs_iozero.David Chinner
kmap() is inefficient and does not scale well. kmap_atomic() is a better choice. Use the generic wrapper function instead of open coding the kmap-memset-dcache flush-kunmap stuff. SGI-PV: 960904 SGI-Modid: xfs-linux-melb:xfs-kern:28041a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10[XFS] Remove a bunch of unused functions from XFS.Eric Sandeen
Patch provided by Eric Sandeen (sandeen@sandeen.net). SGI-PV: 960897 SGI-Modid: xfs-linux-melb:xfs-kern:28038a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10[XFS] Remove unused arguments from the XFS_BTREE_*_ADDR macros.Eric Sandeen
It makes it incrementally clearer to read the code when the top of a macro spaghetti-pile only receives the 3 arguments it uses, rather than 2 extra ones which are not used. Also when you start pulling this thread out of the sweater (i.e. remove unused args from XFS_BTREE_*_ADDR), a couple other third arms etc fall off too. If they're not used in the macro, then they sometimes don't need to be passed to the function calling the macro either, etc.... Patch provided by Eric Sandeen (sandeen@sandeen.net). SGI-PV: 960197 SGI-Modid: xfs-linux-melb:xfs-kern:28037a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10[XFS] Remove unused header files for MAC and CAP checking functionality.Eric Sandeen
xfs_mac.h and xfs_cap.h provide definitions and macros that aren't used anywhere in XFS at all. They are left-overs from "to be implement at some point in the future" functionality that Irix XFS has. If this functionality ever goes into Linux, it will be provided at a different layer, most likely through the security hooks in the kernel so we will never need this functionality in XFS. Patch provided by Eric Sandeen (sandeen@sandeen.net). SGI-PV: 960895 SGI-Modid: xfs-linux-melb:xfs-kern:28036a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10[XFS] Make freeze code a little cleaner.David Chinner
Fixes a few small issues (mostly cosmetic) that were picked up during the review cycle for the last set of freeze path changes. SGI-PV: 959267 SGI-Modid: xfs-linux-melb:xfs-kern:28035a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10[XFS] Remove unused argument to xfs_bmap_finishEric Sandeen
The firstblock argument to xfs_bmap_finish is not used by that function. Remove it and cleanup the code a bit. Patch provided by Eric Sandeen. SGI-PV: 960196 SGI-Modid: xfs-linux-melb:xfs-kern:28034a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10[XFS] Clean up use of VFS attr flagsEric Sandeen
Use the the generic VFS attr flags where appropriate instead of open coding them to the same values. Patch provided by Eric Sandeen. SGI-PV: 960868 SGI-Modid: xfs-linux-melb:xfs-kern:28033a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10[XFS] Remove useless memory barrierRalf Baechle
wake_up's implementation does an implicit memory barrier so the explicit memory barrier is not needed in vfs_sync_worker. Patch provided by Ralf Baechle. SGI-PV: 960867 SGI-Modid: xfs-linux-melb:xfs-kern:28032a Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>