aboutsummaryrefslogtreecommitdiff
path: root/fs/xfs
AgeCommit message (Collapse)Author
2007-07-19Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Fix inode size update before data write in xfs_setattr [XFS] Allow punching holes to free space when at ENOSPC [XFS] Implement ->page_mkwrite in XFS. [FS] Implement block_page_mkwrite. Manually fix up conflict with Nick's VM fault handling patches in fs/xfs/linux-2.6/xfs_file.c Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19mm: fault feedback #1Nick Piggin
Change ->fault prototype. We now return an int, which contains VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte. FAULT_RET_ code tells the VM whether a page was found, whether it has been locked, and potentially other things. This is not quite the way he wanted it yet, but that's changed in the next patch (which requires changes to arch code). This means we no longer set VM_CAN_INVALIDATE in the vma in order to say that a page is locked which requires filemap_nopage to go away (because we can no longer remain backward compatible without that flag), but we were going to do that anyway. struct fault_data is renamed to struct vm_fault as Linus asked. address is now a void __user * that we should firmly encourage drivers not to use without really good reason. The page is now returned via a page pointer in the vm_fault struct. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19mm: merge populate and nopage into fault (fixes nonlinear)Nick Piggin
Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19mm: fix fault vs invalidate race for linear mappingsNick Piggin
Fix the race between invalidate_inode_pages and do_no_page. Andrea Arcangeli identified a subtle race between invalidation of pages from pagecache with userspace mappings, and do_no_page. The issue is that invalidation has to shoot down all mappings to the page, before it can be discarded from the pagecache. Between shooting down ptes to a particular page, and actually dropping the struct page from the pagecache, do_no_page from any process might fault on that page and establish a new mapping to the page just before it gets discarded from the pagecache. The most common case where such invalidation is used is in file truncation. This case was catered for by doing a sort of open-coded seqlock between the file's i_size, and its truncate_count. Truncation will decrease i_size, then increment truncate_count before unmapping userspace pages; do_no_page will read truncate_count, then find the page if it is within i_size, and then check truncate_count under the page table lock and back out and retry if it had subsequently been changed (ptl will serialise against unmapping, and ensure a potentially updated truncate_count is actually visible). Complexity and documentation issues aside, the locking protocol fails in the case where we would like to invalidate pagecache inside i_size. do_no_page can come in anytime and filemap_nopage is not aware of the invalidation in progress (as it is when it is outside i_size). The end result is that dangling (->mapping == NULL) pages that appear to be from a particular file may be mapped into userspace with nonsense data. Valid mappings to the same place will see a different page. Andrea implemented two working fixes, one using a real seqlock, another using a page->flags bit. He also proposed using the page lock in do_no_page, but that was initially considered too heavyweight. However, it is not a global or per-file lock, and the page cacheline is modified in do_no_page to increment _count and _mapcount anyway, so a further modification should not be a large performance hit. Scalability is not an issue. This patch implements this latter approach. ->nopage implementations return with the page locked if it is possible for their underlying file to be invalidated (in that case, they must set a special vm_flags bit to indicate so). do_no_page only unlocks the page after setting up the mapping completely. invalidation is excluded because it holds the page lock during invalidation of each page (and ensures that the page is not mapped while holding the lock). This also allows significant simplifications in do_no_page, because we have the page locked in the right place in the pagecache from the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19[XFS] Fix inode size update before data write in xfs_setattrDavid Chinner
When changing the file size by a truncate() call, we log the change in the inode size. However, we do not flush any outstanding data that might not have been written to disk, thereby violating the data/inode size update order. This can leave files full of NULLs on crash. Hence if we are truncating the file, flush any unwritten data that may lie between the curret on disk inode size and the new inode size that is being logged to ensure that ordering is preserved. SGI-PV: 966308 SGI-Modid: xfs-linux-melb:xfs-kern:29174a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-19[XFS] Allow punching holes to free space when at ENOSPCDavid Chinner
Make the free file space transaction able to dip into the reserved blocks to ensure that we can successfully free blocks when the filesystem is at ENOSPC. SGI-PV: 967788 SGI-Modid: xfs-linux-melb:xfs-kern:29167a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Vlad Apostolov <vapo@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-19[XFS] Implement ->page_mkwrite in XFS.David Chinner
Hook XFS up to ->page_mkwrite to ensure that we know about mmap pages being written to. This allows use to do correct delayed allocation and ENOSPC checking as well as remap unwritten extents so that they get converted correctly during writeback. This is done via the generic block_page_mkwrite code. SGI-PV: 940392 SGI-Modid: xfs-linux-melb:xfs-kern:29149a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-17knfsd: exportfs: add exportfs.h headerChristoph Hellwig
currently the export_operation structure and helpers related to it are in fs.h. fs.h is already far too large and there are very few places needing the export bits, so split them off into a separate header. [akpm@linux-foundation.org: fix cifs build] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Neil Brown <neilb@suse.de> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Freezer: make kernel threads nonfreezable by defaultRafael J. Wysocki
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17mm: clean up and kernelify shrinker registrationRusty Russell
I can never remember what the function to register to receive VM pressure is called. I have to trace down from __alloc_pages() to find it. It's called "set_shrinker()", and it needs Your Help. 1) Don't hide struct shrinker. It contains no magic. 2) Don't allocate "struct shrinker". It's not helpful. 3) Call them "register_shrinker" and "unregister_shrinker". 4) Call the function "shrink" not "shrinker". 5) Reduce the 17 lines of waffly comments to 13, but document it properly. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: David Chinner <dgc@sgi.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-14[XFS] Fix lockdep annotations for xfs_lock_inodesDavid Chinner
SGI-PV: 967035 SGI-Modid: xfs-linux-melb:xfs-kern:29026a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Fix XFS_IOC_FSBULKSTAT{,_SINGLE} & XFS_IOC_FSINUMBERS in compat modeMichal Marek
* 32bit struct xfs_fsop_bulkreq has different size and layout of members, no matter the alignment. Move the code out of the #else branch (why was it there in the first place?). Define _32 variants of the ioctl constants. * 32bit struct xfs_bstat is different because of time_t and on i386 because of different padding. Make xfs_bulkstat_one() accept a custom "output formatter" in the private_data argument which takes care of the xfs_bulkstat_one_compat() that takes care of the different layout in the compat case. * i386 struct xfs_inogrp has different padding. Add a similar "output formatter" mecanism to xfs_inumbers(). SGI-PV: 967354 SGI-Modid: xfs-linux-melb:xfs-kern:29102a Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Compat ioctl handler for handle operationsMichal Marek
32bit struct xfs_fsop_handlereq has different size and offsets (due to pointers). TODO: case XFS_IOC_{FSSETDM,ATTRLIST,ATTRMULTI}_BY_HANDLE still not handled. SGI-PV: 967354 SGI-Modid: xfs-linux-melb:xfs-kern:29101a Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Compat ioctl handler for XFS_IOC_FSGEOMETRY_V1.Michal Marek
i386 struct xfs_fsop_geom_v1 has no padding after the last member, so the size is different. SGI-PV: 967354 SGI-Modid: xfs-linux-melb:xfs-kern:29100a Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Clean up function name handling in tracing codeEric Sandeen
Remove the hardcoded "fnames" for tracing, and just embed them in tracing macros via __FUNCTION__. Kills a lot of #ifdefs too. SGI-PV: 967353 SGI-Modid: xfs-linux-melb:xfs-kern:29099a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Quota inode has no parent.David Chinner
Avoid using a special "zero inode" as the parent of the quota inode as this can confuse the filestreams code into thinking the quota inode has a parent. We do not want the quota inode to follow filestreams allocation rules, so pass a NULL as the parent inode and detect this condition when doing stream associations. SGI-PV: 964469 SGI-Modid: xfs-linux-melb:xfs-kern:29098a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Concurrent Multi-File Data StreamsDavid Chinner
In media spaces, video is often stored in a frame-per-file format. When dealing with uncompressed realtime HD video streams in this format, it is crucial that files do not get fragmented and that multiple files a placed contiguously on disk. When multiple streams are being ingested and played out at the same time, it is critical that the filesystem does not cross the streams and interleave them together as this creates seek and readahead cache miss latency and prevents both ingest and playout from meeting frame rate targets. This patch set creates a "stream of files" concept into the allocator to place all the data from a single stream contiguously on disk so that RAID array readahead can be used effectively. Each additional stream gets placed in different allocation groups within the filesystem, thereby ensuring that we don't cross any streams. When an AG fills up, we select a new AG for the stream that is not in use. The core of the functionality is the stream tracking - each inode that we create in a directory needs to be associated with the directories' stream. Hence every time we create a file, we look up the directories' stream object and associate the new file with that object. Once we have a stream object for a file, we use the AG that the stream object point to for allocations. If we can't allocate in that AG (e.g. it is full) we move the entire stream to another AG. Other inodes in the same stream are moved to the new AG on their next allocation (i.e. lazy update). Stream objects are kept in a cache and hold a reference on the inode. Hence the inode cannot be reclaimed while there is an outstanding stream reference. This means that on unlink we need to remove the stream association and we also need to flush all the associations on certain events that want to reclaim all unreferenced inodes (e.g. filesystem freeze). SGI-PV: 964469 SGI-Modid: xfs-linux-melb:xfs-kern:29096a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Vlad Apostolov <vapo@sgi.com>
2007-07-14[XFS] Use uninitialized_var macro to stop warning about rtxAndrew Morton
Appease gcc in regards to "warning: 'rtx' is used uninitialized in this function". SGI-PV: 907752 SGI-Modid: xfs-linux-melb:xfs-kern:29007a Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] XFS should not be looking at filp reference countsChristoph Hellwig
A check for file_count is always a bad idea. Linux has the ->release method to deal with cleanups on last close and ->flush is only for the very rare case where we want to perform an operation on every drop of a reference to a file struct. This patch gets rid of vop_close and surrounding code in favour of simply doing the page flushing from ->release. SGI-PV: 966562 SGI-Modid: xfs-linux-melb:xfs-kern:28952a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Use is_power_of_2 instead of open coding checksVignesh Babu
SGI-PV: 966576 SGI-Modid: xfs-linux-melb:xfs-kern:28950a Signed-off-by: Vignesh Babu <vignesh.babu@wipro.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Reduce shouting by removing unnecessary macros from dir2 code.Christoph Hellwig
SGI-PV: 966505 SGI-Modid: xfs-linux-melb:xfs-kern:28947a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Simplify XFS min/max macros.David Chinner
SGI-PV: 964547 SGI-Modid: xfs-linux-melb:xfs-kern:28945a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Nathan Scott <nscott@aconex.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Kill off xfs_count_bitsEric Sandeen
xfs_count_bits is only called once, and is then compared to 0. IOW, what it really wants to know is, is the bitmap empty. This can be done more simply, certainly. SGI-PV: 966503 SGI-Modid: xfs-linux-melb:xfs-kern:28944a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Cancel transactions on xfs_itruncate_start error.Jesper Juhl
SGI-PV: 966502 SGI-Modid: xfs-linux-melb:xfs-kern:28943a Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Use do_div() on 64 bit types.Christoph Hellwig
SGI-PV: 966145 SGI-Modid: xfs-linux-melb:xfs-kern:28889a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Fix remount,readonly path to flush everything correctly.David Chinner
The remount readonly path can fail to writeback properly because we still have active transactions after calling xfs_quiesce_fs(). Further investigation shows that this path is broken in the same ways that the xfs freeze path was broken so fix it the same way. SGI-PV: 964464 SGI-Modid: xfs-linux-melb:xfs-kern:28869a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Cleanup inode extent size hint extractionDavid Chinner
SGI-PV: 966004 SGI-Modid: xfs-linux-melb:xfs-kern:28866a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Prevent ENOSPC from aborting transactions that need to succeedDavid Chinner
During delayed allocation extent conversion or unwritten extent conversion, we need to reserve some blocks for transactions reservations. We need to reserve these blocks in case a btree split occurs and we need to allocate some blocks. Unfortunately, we've only ever reserved the number of data blocks we are allocating, so in both the unwritten and delalloc case we can get ENOSPC to the transaction reservation. This is bad because in both cases we cannot report the failure to the writing application. The fix is two-fold: 1 - leverage the reserved block infrastructure XFS already has to reserve a small pool of blocks by default to allow specially marked transactions to dip into when we are at ENOSPC. Default setting is min(5%, 1024 blocks). 2 - convert critical transaction reservations to be allowed to dip into this pool. Spots changed are delalloc conversion, unwritten extent conversion and growing a filesystem at ENOSPC. This also allows growing the filesytsem to succeed at ENOSPC. SGI-PV: 964468 SGI-Modid: xfs-linux-melb:xfs-kern:28865a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Prevent deadlock when flushing inodes on unmountDavid Chinner
When we are unmounting the filesystem, we flush all the inodes to disk. Unfortunately, if we have an inode cluster that has just been freed and marked stale sitting in an incore log buffer (i.e. hasn't been flushed to disk), it will be holding all the flush locks on the inodes in that cluster. xfs_iflush_all() which is called during unmount walks all the inodes trying to reclaim them, and it doing so calls xfs_finish_reclaim() on each inode. If the inode is dirty, if grabs the flush lock and flushes it. Unfortunately, find dirty inodes that already have their flush lock held and so we sleep. At this point in the unmount process, we are running single-threaded. There is nothing more that can push on the log to force the transaction holding the inode flush locks to disk and hence we deadlock. The fix is to issue a log force before flushing the inodes on unmount so that all the flush locks will be released before we start flushing the inodes. SGI-PV: 964538 SGI-Modid: xfs-linux-melb:xfs-kern:28862a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Log the agf_length change in xfs_growfs_data_private().Tim Shimmin
SGI-PV: 963528 SGI-Modid: xfs-linux-melb:xfs-kern:28856a Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2007-07-14[XFS] Map unwritten extents correctly for I/o completion processingDavid Chinner
If we have multiple unwritten extents within a single page, we fail to tell the I/o completion construction handlers we need a new handle for the second and subsequent blocks in the page. While we still issue the I/O correctly, we do not have the correct ranges recorded in the ioend structures and hence when we go to convert the unwritten extents we screw it up. Make sure we start a new ioend every time the mapping changes so that we convert the correct ranges on I/O completion. SGI-PV: 964647 SGI-Modid: xfs-linux-melb:xfs-kern:28797a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Apply transaction delta counts atomically to incore countersDavid Chinner
With the per-cpu superblock counters, batch updates are no longer atomic across the entire batch of changes. This is not an issue if each individual change in the batch is applied atomically. Unfortunately, free block count changes are not applied atomically, and they are applied in a manner guaranteed to cause problems. Essentially, the free block count reservation that the transaction took initially is returned to the in core counters before a second delta takes away what is used. because these two operations are not atomic, we can race with another thread that can use the returned transaction reservation before the transaction takes the space away again and we can then get ENOSPC being reported in a spot where we don't have an ENOSPC condition, nor should we ever see one there. Fix it up by rolling the two deltas into the one so it can be applied safely (i.e. atomically) to the incore counters. SGI-PV: 964465 SGI-Modid: xfs-linux-melb:xfs-kern:28796a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Handle null returned from xfs_vtoi() in xfs_setfilesize().David Chinner
SGI-PV: 965636 SGI-Modid: xfs-linux-melb:xfs-kern:28777a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Olaf Weber <olaf@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Block on unwritten extent conversion during synchronous direct I/O.David Chinner
Currently we do not wait on extent conversion to occur, and hence we can return to userspace from a synchronous direct I/O write without having completed all the actions in the write. Hence a read after the write may see zeroes (unwritten extent) rather than the data that was written. Block the I/O completion by triggering a synchronous workqueue flush to ensure that the conversion has occurred before we return to userspace. SGI-PV: 964092 SGI-Modid: xfs-linux-melb:xfs-kern:28775a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Flush the block device before closing it on unmount.David Chinner
SGI-PV: 965630 SGI-Modid: xfs-linux-melb:xfs-kern:28774a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] xfs_bmapi fails to update the previous extent pointerDavid Chinner
When processing multiple extent maps, xfs_bmapi needs to keep track of the extent behind the one it is currently working on to be able to trim extent ranges correctly. Failing to update the previous pointer can result in corrupted extent lists in memory and this will result in panics or assert failures. Update the previous pointer correctly when we move to the next extent to process. SGI-PV: 965631 SGI-Modid: xfs-linux-melb:xfs-kern:28773a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Vlad Apostolov <vapo@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Fix the transaction flags to make lazy superblock counters work.David Chinner
SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28653a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Lazy Superblock CountersDavid Chinner
When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Use generic shrinker interfaces in XFS.Andrew Morton
SGI-PV: 964986 SGI-Modid: xfs-linux-melb:xfs-kern:28642a Signed-Off-By: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Make hole punching at EOF atomic.David Chinner
If hole punching at EOF is done as two steps (i.e. truncate then extend) the file is in a transient state between the two steps where an application can see the incorrect file size. Punching a hole to EOF needs to be treated in teh same way as all other hole punching cases so that the file size is never seen to change. SGI-PV: 962012 SGI-Modid: xfs-linux-melb:xfs-kern:28641a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Vlad Apostolov <vapo@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Fix vmalloc leak on mount/unmount.David Chinner
When setting the length of the iclogbuf to write out we should just be changing the desired byte count rather completely reassociating the buffer memory with the buffer. Reassociating the buffer memory changes the apparent length of the buffer and hence when we free the buffer, we don't free all the vmap()d space we originally allocated. SGI-PV: 964983 SGI-Modid: xfs-linux-melb:xfs-kern:28640a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Fix double free in xfs_buf_get_noaddr error handling pathChristoph Hellwig
SGI-PV: 964983 SGI-Modid: xfs-linux-melb:xfs-kern:28639a Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Fix use-after-free during log unmount.David Chinner
Don't reference the log buffer after running the callbacks as the callback can trigger the log buffers to be freed during unmount. SGI-PV: 964545 SGI-Modid: xfs-linux-melb:xfs-kern:28567a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Sleeping with the ilock waiting for I/O completion is Bad.David Chinner
Recent fixes to the filesystem freezing code introduced a vn_iowait call in the middle of the sync code. Unfortunately, at the point where this call was added we are holding the ilock. The ilock is needed by I/O completion for unwritten extent conversion and now updating the file size. Hence I/o cannot complete if we hold the ilock while waiting for I/O completion. Fix up the bug and clean the code up around it. SGI-PV: 963674 SGI-Modid: xfs-linux-melb:xfs-kern:28566a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Don't grow filesystems past the size they can index.Nathan Scott
When growing a filesystem we don't check to see if the new size overflows the page cache index range, so we can do silly things like grow a filesystem page 16TB on a 32bit. Check new filesystem sizes against the limits the kernel can support. SGI-PV: 957886 SGI-Modid: xfs-linux-melb:xfs-kern:28563a Signed-Off-By: Nathan Scott <nscott@aconex.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Only use refcounted pages for I/OChristoph Hellwig
Many block drivers (aoe, iscsi) really want refcountable pages in bios, which is what almost everyone send down. XFS unfortunately has a few places where it sends down buffers that may come from kmalloc, which breaks them. Fix the places that use kmalloc()d buffers. SGI-PV: 964546 SGI-Modid: xfs-linux-melb:xfs-kern:28562a Signed-Off-By: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-10sendfile: remove .sendfile from filesystems that use generic_file_sendfile()Jens Axboe
They can use generic_file_splice_read() instead. Since sys_sendfile() now prefers that, there should be no change in behaviour. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-06-19[XFS] s/memclear_highpage_flush/zero_user_page/Christoph Hellwig
SGI-PV: 957103 SGI-Modid: xfs-linux-melb:xfs-kern:28678a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-29[XFS] Write at EOF may not update filesize correctly.David Chinner
The recent fix for preventing NULL files from being left around does not update the file size corectly in all cases. The missing case is a write extending the file that does not need to allocate a block. In that case we used a read mapping of the extent which forced the use of the read I/O completion handler instead of the write I/O completion handle. Hence the file size was not updated on I/O completion. SGI-PV: 965068 SGI-Modid: xfs-linux-melb:xfs-kern:28657a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Nathan Scott <nscott@aconex.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-17Remove SLAB_CTOR_CONSTRUCTORChristoph Lameter
SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: David Howells <dhowells@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@ucw.cz> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>