aboutsummaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2009-01-05ocfs2: Add clusters free in dealloc_ctxt.Tao Ma
Now in ocfs2 xattr set, the whole process are divided into many small parts and they are wrapped into diffrent transactions and it make the set doesn't look like a real transaction. So we want to integrate it into a real one. In some cases we will allocate some clusters and free some in just one transaction. e.g, one xattr is larger than inline size, so it and its value root is stored within the inode while the value is outside in a cluster. Then we try to update it with a smaller value(larger than the size of root but smaller than inline size), we may need to free the outside cluster while allocate a new bucket(one cluster) since now the inode may be full. The old solution will lock the global_bitmap(if the local alloc failed in stress test) and then the truncate log. This will cause a ABBA lock with truncate log flush. This patch add the clusters free in dealloc_ctxt, so that we can record the free clusters during the transaction and then free it after we release the global_bitmap in xattr set. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2/xattr: Only extend xattr bucket in need.Tao Ma
When the first block of a bucket is filled up with xattr entries, we normally extend the bucket. But if we are just replace one xattr with small length, we don't need to extend it. This is important since we will calculate what we need before the transaction and in this situation no resources will be allocated. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2/xattr: Only set buffer update if it doesn't exist in cache.Tao Ma
When we call ocfs2_init_xattr_bucket, we deem that the new buffer head will be written to disk immediately, so we just use sb_getblk. But in some cases the buffer may have already been in ocfs2 uptodate cache, so we only call ocfs2_set_buffer_uptodate if the buffer head isn't in the cache. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2/xattr: Remove additional bucket allocation in bucket defragment.Tao Ma
Joel has refactored xattr bucket and make xattr bucket a general wrapper. So in ocfs2_defrag_xattr_bucket, we have already passed the bucket in, so there is no need to allocate a new one and read it. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Use buckets in ocfs2_xattr_set_entry_in_bucket().Joel Becker
The ocfs2_xattr_set_entry_in_bucket() function is already working on an ocfs2_xattr_bucket structure, so let's use the bucket API. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Use buckets in ocfs2_defrag_xattr_bucket().Joel Becker
Use the ocfs2_xattr_bucket abstraction for reading and writing the bucket in ocfs2_defrag_xattr_bucket(). Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Use buckets in ocfs2_xattr_create_index_block().Joel Becker
Use the ocfs2_xattr_bucket abstraction in ocfs2_xattr_create_index_block() and its helpers. We get more efficient reads, a lot less buffer_head munging, and nicer code to boot. While we're at it, ocfs2_xattr_update_xattr_search() becomes void. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Use buckets in ocfs2_xattr_bucket_find().Joel Becker
Change the ocfs2_xattr_bucket_find() function to use ocfs2_xattr_bucket as its abstraction. This makes for more efficient reads, as buckets are linear blocks, and also has improved caching characteristics. It also reads better. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Take ocfs2_xattr_bucket structures off of the stack.Joel Becker
The ocfs2_xattr_bucket structure is a nice abstraction, but it is a bit large to have on the stack. Just like ocfs2_path, let's allocate it with a ocfs2_xattr_bucket_new() function. We can now store the inode on the bucket, cleaning up all the other bucket functions. While we're here, we catch another place or two that wasn't using ocfs2_read_xattr_bucket(). Updates: - No longer allocating xis.bucket, as it will never be used. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Copy xattr buckets with a dedicated function.Joel Becker
Now that the places that copy whole buckets are using struct ocfs2_xattr_bucket, we can do the copy in a dedicated function. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Wrap journal_access/journal_dirty for xattr buckets.Joel Becker
A common action is to call ocfs2_journal_access() and ocfs2_journal_dirty() on the buffer heads of an xattr bucket. Let's create nice wrappers. While we're there, let's drop the places that try to be smart by writing only the first and last blocks of a bucket. A bucket is contiguous, so writing the whole thing is actually more efficient. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Improve ocfs2_read_xattr_bucket().Joel Becker
The ocfs2_read_xattr_bucket() function would read an xattr bucket into a list of buffer heads. However, we have a nice ocfs2_xattr_bucket structure. Let's have it fill that out instead. In addition, ocfs2_read_xattr_bucket() would initialize buffer heads for a bucket that's never been on disk before. That's confusing. Let's call that functionality ocfs2_init_xattr_bucket(). The functions ocfs2_cp_xattr_bucket() and ocfs2_half_xattr_bucket() are updated to use the ocfs2_xattr_bucket structure rather than raw bh lists. That way they can use the new read/init calls. In addition, they drop the wasted read of an existing target bucket. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Provide a wrapper to brelse() xattr bucket buffers.Joel Becker
A common theme is walking all the buffer heads on an ocfs2_xattr_bucket and releasing them. Let's wrap that. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Convenient access to an xattr bucket's header.Joel Becker
The xattr code often wants to access the ocfs2_xattr_header at the start of an bucket. Rather than walk the pointer chains, let's just create another nice macro. As a side benefit, we can get rid of the mostly spurious ->bu_xh element on the bucket structure. The idea is ripped from the ocfs2_path code. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Convenient access to xattr bucket data blocks.Joel Becker
The xattr code often wants to access the data pointer for blocks in an xattr bucket. This is usually found by dereferencing the bh array hanging off of the ocfs2_xattr_bucket structure. Rather than do this all the time, let's provide a nice little macro. The idea is ripped from the ocfs2_path code. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Convenient access to an xattr bucket's block number.Joel Becker
The xattr code often wants to know the block number of an xattr bucket. This is usually found by dereferencing the first bh hanging off of the ocfs2_xattr_bucket structure. Rather than do this all the time, let's provide a nice little macro. The idea is ripped from the ocfs2_path code. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Field prefixes for the xattr_bucket structureJoel Becker
The ocfs2_xattr_bucket structure keeps track of the buffers for one xattr bucket. Let's prefix the fields for easier code navigation. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-04Merge branch 'audit.b61' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current * 'audit.b61' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: audit: validate comparison operations, store them in sane form clean up audit_rule_{add,del} a bit make sure that filterkey of task,always rules is reported audit rules ordering, part 2 fixing audit rule ordering mess, part 1 audit_update_lsm_rules() misses the audit_inode_hash[] ones sanitize audit_log_capset() sanitize audit_fd_pair() sanitize audit_mq_open() sanitize AUDIT_MQ_SENDRECV sanitize audit_mq_notify() sanitize audit_mq_getsetattr() sanitize audit_ipc_set_perm() sanitize audit_ipc_obj() sanitize audit_socketcall don't reallocate buffer in every audit_sockaddr()
2009-01-04fs: symlink write_begin allocation context fixNick Piggin
With the write_begin/write_end aops, page_symlink was broken because it could no longer pass a GFP_NOFS type mask into the point where the allocations happened. They are done in write_begin, which would always assume that the filesystem can be entered from reclaim. This bug could cause filesystem deadlocks. The funny thing with having a gfp_t mask there is that it doesn't really allow the caller to arbitrarily tinker with the context in which it can be called. It couldn't ever be GFP_ATOMIC, for example, because it needs to take the page lock. The only thing any callers care about is __GFP_FS anyway, so turn that into a single flag. Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on this flag in their write_begin function. Change __grab_cache_page to accept a nofs argument as well, to honour that flag (while we're there, change the name to grab_cache_page_write_begin which is more instructive and does away with random leading underscores). This is really a more flexible way to go in the end anyway -- if a filesystem happens to want any extra allocations aside from the pagecache ones in ints write_begin function, it may now use GFP_KERNEL (rather than GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a random example). [kosaki.motohiro@jp.fujitsu.com: fix ubifs] [kosaki.motohiro@jp.fujitsu.com: fix fuse] Signed-off-by: Nick Piggin <npiggin@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Cleaned up the calling convention: just pass in the AOP flags untouched to the grab_cache_page_write_begin() function. That just simplifies everybody, and may even allow future expansion of the logic. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04fs: introduce bgl_lock_ptr()Pekka Enberg
As suggested by Andreas Dilger, introduce a bgl_lock_ptr() helper in <linux/blockgroup_lock.h> and add separate sb_bgl_lock() helpers to filesystem specific header files to break the hidden dependency to struct ext[234]_sb_info. Also, while at it, convert the macros to static inlines to try make up for all the times I broke Andrew Morton's tree. Acked-by: Andreas Dilger <adilger@sun.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04sanitize audit_fd_pair()Al Viro
* no allocations * return void Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-03Merge branch 'cpus4096-for-linus-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits) x86: setup_per_cpu_areas() cleanup cpumask: fix compile error when CONFIG_NR_CPUS is not defined cpumask: use alloc_cpumask_var_node where appropriate cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t x86: use cpumask_var_t in acpi/boot.c x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids sched: put back some stack hog changes that were undone in kernel/sched.c x86: enable cpus display of kernel_max and offlined cpus ia64: cpumask fix for is_affinity_mask_valid() cpumask: convert RCU implementations, fix xtensa: define __fls mn10300: define __fls m32r: define __fls h8300: define __fls frv: define __fls cris: define __fls cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS cpumask: zero extra bits in alloc_cpumask_var_node cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/ cpumask: convert mm/ ...
2009-01-03get rid of special-casing the /sbin/loader on alphaAl Viro
... just make it a binfmt handler like #! one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-03sanitize ifdefs in binfmt_aoutAl Viro
They are actually alpha vs. i386/arm/m68k i.e. ecoff vs. aout. In the only place where we actually tried to handle arm and i386/m68k in different ways (START_DATA() in coredump handling), the arm variant works for all of them (i386 and m68k have u.start_code set to 0). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-03remove the rudiment of a.out for sparcAl Viro
it's been used only in sunos compat Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubifs-2.6: (33 commits) UBIFS: add more useful debugging prints UBIFS: print debugging messages properly UBIFS: fix numerous spelling mistakes UBIFS: allow mounting when short of space UBIFS: fix writing uncompressed files UBIFS: fix checkpatch.pl warnings UBIFS: fix sparse warnings UBIFS: simplify make_free_space UBIFS: do not lie about used blocks UBIFS: restore budg_uncommitted_idx UBIFS: always commit on unmount UBIFS: use ubi_sync UBIFS: always commit in sync_fs UBIFS: fix file-system synchronization UBIFS: fix constants initialization UBIFS: avoid unnecessary calculations UBIFS: re-calculate min_idx_size after the commit UBIFS: use nicer 64-bit math UBIFS: fix available blocks count UBIFS: various comment improvements and fixes ...
2009-01-02Merge branch 'kvm-updates/2.6.29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (140 commits) KVM: MMU: handle large host sptes on invlpg/resync KVM: Add locking to virtual i8259 interrupt controller KVM: MMU: Don't treat a global pte as such if cr4.pge is cleared MAINTAINERS: Maintainership changes for kvm/ia64 KVM: ia64: Fix kvm_arch_vcpu_ioctl_[gs]et_regs() KVM: x86: Rework user space NMI injection as KVM_CAP_USER_NMI KVM: VMX: Fix pending NMI-vs.-IRQ race for user space irqchip KVM: fix handling of ACK from shared guest IRQ KVM: MMU: check for present pdptr shadow page in walk_shadow KVM: Consolidate userspace memory capability reporting into common code KVM: Advertise the bug in memory region destruction as fixed KVM: use cpumask_var_t for cpus_hardware_enabled KVM: use modern cpumask primitives, no cpumask_t on stack KVM: Extract core of kvm_flush_remote_tlbs/kvm_reload_remote_mmus KVM: set owner of cpu and vm file operations anon_inodes: use fops->owner for module refcount x86: KVM guest: kvm_get_tsc_khz: return khz, not lpj KVM: MMU: prepopulate the shadow on invlpg KVM: MMU: skip global pgtables on sync due to cr3 switch KVM: MMU: collapse remote TLB flushes on root sync ...
2009-01-02CRED: Wrap task credential accesses in the devpts filesystemDavid Howells
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02devpts: fix unused function warningAndrew Morton
fs/devpts/inode.c:324: warning: 'compare_init_pts_sb' defined but not used Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02devpts: Coding style clean upAlan Cox
Just nail the oddments now while this code is being touched Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Enable multiple instances of devptsSukadev Bhattiprolu
To support containers, allow multiple instances of devpts filesystem, such that indices of ptys allocated in one instance are independent of ptys allocated in other instances of devpts. But to preserve backward compatibility, enable this support for multiple instances only if: - CONFIG_DEVPTS_MULTIPLE_INSTANCES is set to Y, and - '-o newinstance' mount option is specified while mounting devpts To use multi-instance mount, a container startup script could: $ ns_exec -cm /bin/bash $ umount /dev/pts $ mount -t devpts -o newinstance lxcpts /dev/pts $ mount -o bind /dev/pts/ptmx /dev/ptmx $ /usr/sbin/sshd -p 1234 where 'ns_exec -cm /bin/bash' is calls clone() with CLONE_NEWNS flag and execs /bin/bash in the child process. A pty created by the sshd is not visible in the original mount of /dev/pts. USER-SPACE-IMPACT: - See Documentation/fs/devpts.txt (included in next patch) for user- space impact in multi-instance and mixed-mode operation. TODO: - Update mount(8), pts(4) man pages. Highlight impact of not redirecting /dev/ptmx to /dev/pts/ptmx after a multi-instance mount. Changelog[v6]: - [Dave Hansen] Use new get_init_pts_sb() interface - [Serge Hallyn] Don't bother displaying 'newinstance' in show_options - [Serge Hallyn] Use macros (PARSE_REMOUNT/PARSE_MOUNT) instead of 0/1. - [Serge Hallyn] Check error return from get_sb_single() (now get_init_pts_sb()) - devpts_pty_kill(): don't dput error dentries Changelog[v5]: - Move get_sb_ref() definition to earlier patch - Move usage info to Documentation/filesystems/devpts.txt (next patch) - Make ptmx node even in init_pts_ns, now that default mode is 0000 (defined in earlier patch, enabled here). - Cache ptmx dentry and use to update mode during remount (defined in earlier patch, enabled here). - Bugfix: explicitly ignore newinstance on remount (if newinstance was specified on remount of initial mount, it would be ignored but /proc/mounts would imply that the option was set) Changelog[v4]: - Update patch description to address H. Peter Anvin's comments - Consolidate multi-instance mode code under new config token, CONFIG_DEVPTS_MULTIPLE_INSTANCE. - Move usage-details from patch description to Documentation/fs/devpts.txt Changelog[v3]: - Rename new mount option to 'newinstance' - Create ptmx nodes only in 'newinstance' mounts - Bugfix: parse_mount_options() modifies @data but since we need to parse the @data twice (once in devpts_get_sb() and once during do_remount_sb()), parse a local copy of @data in devpts_get_sb(). (restructured code in devpts_get_sb() to fix this) Changelog[v2]: - Support both single-mount and multiple-mount semantics and provide '-onewmnt' option to select the semantics. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Define get_init_pts_sb()Sukadev Bhattiprolu
See comments in the function header for details. The new interface will be used in a follow-on patch. Changelog [v2]: [Dave Hansen] Replace get_sb_ref() in fs/super.c with get_init_pts_sb() and make the new interface private to devpts Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Define mknod_ptmx()Sukadev Bhattiprolu
/dev/ptmx is closely tied to the devpts filesystem. An open of /dev/ptmx, allocates the next pty index and the associated device shows up in the devpts fs as /dev/pts/n. Wih multiple instancs of devpts filesystem, during an open of /dev/ptmx we would be unable to determine which instance of the devpts is being accessed. So we move the 'ptmx' node into /dev/pts and use the inode of the 'ptmx' node to identify the superblock and hence the devpts instance. This patch adds ability for the kernel to internally create the [ptmx, c, 5:2] device when mounting devpts filesystem. Since the ptmx node in devpts is new and may surprise some userspace scripts, the default permissions for the new node is 0000. These permissions can be changed either using chmod or by remounting with the new '-o ptmxmode=0666' mount option. Changelog[v5]: - [Serge Hallyn bugfix]: Letting new_inode() assign inode number to ptmx can collide with hand-assigning inode numbers to ptys. So, hand-assign specific inode number to ptmx node also. - [Serge Hallyn]: Maybe safer to grab root dentry mutex while creating ptmx node - [Bugfix with Serge Hallyn] Replace lookup_one_len() in mknod_ptmx() wih d_alloc_name() (lookup during ->get_sb() locks up system). To simplify patchset, fold the ptmx_dentry patch into this. Changelog[v4]: - Change default permissions of pts/ptmx node to 0000. - Move code for ptmxmode under #ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES. Changelog[v3]: - Rename ptmx_mode to ptmxmode (for consistency with 'newinstance') Changelog[v2]: - [H. Peter Anvin] Remove mknod() system call support and create the ptmx node internally. Changelog[v1]: - Earlier version of this patch enabled creating /dev/pts/tty as well. As pointed out by Al Viro and H. Peter Anvin, that is not really necessary. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Extract option parsing to new functionSukadev Bhattiprolu
Move code to parse mount options into a separate function so it can (later) be shared between mount and remount operations. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Per-mount 'config' objectSukadev Bhattiprolu
With support for multiple mounts of devpts, the 'config' structure really represents per-mount options rather than config parameters. Rename 'config' structure to 'pts_mount_opts' and store it in the super-block. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Per-mount allocated_ptysSukadev Bhattiprolu
To enable multiple mounts of devpts, 'allocated_ptys' must be a per-mount variable rather than a global variable. Move 'allocated_ptys' into the super_block's s_fs_info. Changelog[v2]: Define and use DEVPTS_SB() wrapper. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Remove devpts_root globalSukadev Bhattiprolu
Remove the 'devpts_root' global variable and find the root dentry using the super_block. The super-block can be found from the device inode, using the new wrapper, pts_sb_from_inode(). Changelog: This patch is based on an earlier patchset from Serge Hallyn and Matt Helsley. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (34 commits) nfsd race fixes: jfs nfsd race fixes: reiserfs nfsd race fixes: ext4 nfsd race fixes: ext3 nfsd race fixes: ext2 nfsd/create race fixes, infrastructure filesystem notification: create fs/notify to contain all fs notification fs/block_dev.c: __read_mostly improvement and sb_is_blkdev_sb utilization kill ->dir_notify() filp_cachep can be static in fs/file_table.c fix f_count description in Documentation/filesystems/files.txt make INIT_FS use the __RW_LOCK_UNLOCKED initialization take init_fs to saner place kill vfs_permission pass a struct path * to may_open kill walk_init_root remove incorrect comment in inode_permission expand some comments (d_path / seq_path) correct wrong function name of d_put in kernel document and source comment fix switch_names() breakage in short-to-short case ...
2008-12-31nfsd race fixes: jfsDave Kleikamp
jfs version of Al Viro's nfsd race patches Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31nfsd race fixes: reiserfsAl Viro
... and the same for reiserfs. The difference here is that we need insert_inode_locked4() to match iget5_locked(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31nfsd race fixes: ext4Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31nfsd race fixes: ext3Al Viro
ext3 analog of the previous patch Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31nfsd race fixes: ext2Al Viro
* make ext2_new_inode() put the inode into icache in locked state * do not unlock until the inode is fully set up; otherwise nfsd might pick it in half-baked state. * make sure that ext2_new_inode() does *not* lead to two inodes with the same inumber hashed at the same time; otherwise a bogus fhandle coming from nfsd might race with inode creation: nfsd: iget_locked() creates inode nfsd: try to read from disk, block on that. ext2_new_inode(): allocate inode with that inumber ext2_new_inode(): insert it into icache, set it up and dirty ext2_write_inode(): get the relevant part of inode table in cache, set the entry for our inode (and start writing to disk) nfsd: get CPU again, look into inode table, see nice and sane on-disk inode, set the in-core inode from it oops - we have two in-core inodes with the same inumber live in icache, both used for IO. Welcome to fs corruption... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31nfsd/create race fixes, infrastructureAl Viro
new helpers - insert_inode_locked() and insert_inode_locked4(). Hash new inode, making sure that there's no such inode in icache already. If there is and it does not end up unhashed (as would happen if we have nfsd trying to resolve a bogus fhandle), fail. Otherwise insert our inode into hash and succeed. In either case have i_state set to new+locked; cleanup ends up being simpler with such calling conventions. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31filesystem notification: create fs/notify to contain all fs notificationEric Paris
Creating a generic filesystem notification interface, fsnotify, which will be used by inotify, dnotify, and eventually fanotify is really starting to clutter the fs directory. This patch simply moves inotify and dnotify into fs/notify/inotify and fs/notify/dnotify respectively to make both current fs/ and future notification tidier. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31fs/block_dev.c: __read_mostly improvement and sb_is_blkdev_sb utilizationDenis ChengRq
- iget5_locked in bdget really needs blockdev_superblock, instead of bd_mnt, so bd_mnt could be just a local variable; - blockdev_superblock really needs __read_mostly, while local var bd_mnt not; - make use of sb_is_blkdev_sb in bd_forget, instead of direct reference to blockdev_superblock. Signed-off-by: Denis ChengRq <crquan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31kill ->dir_notify()Al Viro
Remove the hopelessly misguided ->dir_notify(). The only instance (cifs) has been broken by design from the very beginning; the objects it creates are never destroyed, keep references to struct file they can outlive, nothing that could possibly evict them exists on close(2) path *and* no locking whatsoever is done to prevent races with close(), should the previous, er, deficiencies someday be dealt with. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31filp_cachep can be static in fs/file_table.cEric Dumazet
Instead of creating the "filp" kmem_cache in vfs_caches_init(), we can do it a litle be later in files_init(), so that filp_cachep is static to fs/file_table.c Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31make INIT_FS use the __RW_LOCK_UNLOCKED initializationSteven Rostedt
[AV: rediffed on top of unification of init_fs] Initialization of init_fs still uses the deprecated RW_LOCK_UNLOCKED macro. This patch updates it to use the __RW_LOCK_UNLOCKED(lock) macro. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31take init_fs to saner placeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>