aboutsummaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2008-04-21trivial: small cleanupsPavel Machek
These are small cleanups all over the tree. Trivial style and comment changes to fs/select.c, kernel/signal.c, kernel/stop_machine.c & mm/pdflush.c Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits) [NET]: Fix and allocate less memory for ->priv'less netdevices [IPV6]: Fix dangling references on error in fib6_add(). [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found [PKT_SCHED]: Fix datalen check in tcf_simp_init(). [INET]: Uninline the __inet_inherit_port call. [INET]: Drop the inet_inherit_port() call. SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked. [netdrvr] forcedeth: internal simplifications; changelog removal phylib: factor out get_phy_id from within get_phy_device PHY: add BCM5464 support to broadcom PHY driver cxgb3: Fix __must_check warning with dev_dbg. tc35815: Statistics cleanup natsemi: fix MMIO for PPC 44x platforms [TIPC]: Cleanup of TIPC reference table code [TIPC]: Optimized initialization of TIPC reference table [TIPC]: Remove inlining of reference table locking routines e1000: convert uint16_t style integers to u16 ixgb: convert uint16_t style integers to u16 sb1000.c: make const arrays static sb1000.c: stop inlining largish static functions ...
2008-04-18Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (64 commits) ocfs2/net: Add debug interface to o2net ocfs2: Only build ocfs2/dlm with the o2cb stack module ocfs2/cluster: Get rid of arguments to the timeout routines ocfs2: Put tree in MAINTAINERS ocfs2: Use BUG_ON ocfs2: Convert ocfs2 over to unlocked_ioctl ocfs2: Improve rename locking fs/ocfs2/aops.c: test for IS_ERR rather than 0 ocfs2: Add inode stealing for ocfs2_reserve_new_inode ocfs2: Add ac_alloc_slot in ocfs2_alloc_context ocfs2: Add a new parameter for ocfs2_reserve_suballoc_bits ocfs2: Enable cross extent block merge. ocfs2: Add support for cross extent block ocfs2: Move /sys/o2cb to /sys/fs/o2cb sysfs: Allow removal of symlinks in the sysfs root ocfs2: Reconnect after idle time out. ocfs2/dlm: Cleanup lockres print ocfs2/dlm: Fix lockname in lockres print function ocfs2/dlm: Move dlm_print_one_mle() from dlmmaster.c to dlmdebug.c ocfs2/dlm: Dumps the purgelist into a debugfs file ...
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (49 commits) [GFS2] fix assertion in log_refund() [GFS2] fix GFP_KERNEL misuses [GFS2] test for IS_ERR rather than 0 [GFS2] Invalidate cache at correct point [GFS2] fs/gfs2/recovery.c: suppress warnings [GFS2] Faster gfs2_bitfit algorithm [GFS2] Streamline quota lock/check for no-quota case [GFS2] Remove drop of module ref where not needed [GFS2] gfs2_adjust_quota has broken unstuffing code [GFS2] possible null pointer dereference fixup [GFS2] Need to ensure that sector_t is 64bits for GFS2 [GFS2] re-support special inode [GFS2] remove gfs2_dev_iops [GFS2] fix file_system_type leak on gfs2meta mount [GFS2] Allow bmap to allocate extents [GFS2] Fix a page lock / glock deadlock [GFS2] proper extern for gfs2/locking/dlm/mount.c:gdlm_ops [GFS2] gfs2/ops_file.c should #include "ops_inode.h" [GFS2] be*_add_cpu conversion [GFS2] Fix bug where we called drop_bh incorrectly ...
2008-04-18ocfs2/net: Add debug interface to o2netSunil Mushran
This patch exposes o2net information via debugfs. The information includes the list of sockets (sock_containers) as well as the list of outstanding messages (send_tracking). Useful for o2dlm debugging. (This patch is derived from an earlier one written by Zach Brown that exposed the same information via /proc.) [Mark: checkpatch fixes] Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Reviewed-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Only build ocfs2/dlm with the o2cb stack moduleMark Fasheh
fs/ocfs2/dlm/ocfs2_dlm.ko and fs/ocfs2/dlm/ocfs2_dlmfs.ko get built if CONFIG_FS_OCFS2 is specified. This isn't quite how it should happen any more - the "o2cb" dlm modules should only be built if CONFIG_FS_OCFS2_O2CB is set, so update the dlm Makefile accordingly. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com>
2008-04-18ocfs2/cluster: Get rid of arguments to the timeout routinesJeff Mahoney
We keep seeing bug reports related to NULL pointer derefs in o2net_set_nn_state(). When I originally wrote up the configurable timeout patch, I had tried to plan for multiple clusters. This was silly. The timeout routines all use o2nm_single_cluster so there's no point in passing an argument at all. This patch removes the arguments and kills those bugs dead. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Use BUG_ONJulia Lawall
if (...) BUG(); should be replaced with BUG_ON(...) when the test has no side-effects to allow a definition of BUG_ON that drops the code completely. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ disable unlikely @ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (unlikely(E)) { BUG(); } + BUG_ON(E); ) @@ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (E) { BUG(); } + BUG_ON(E); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Convert ocfs2 over to unlocked_ioctlAndi Kleen
As far as I can see there is nothing in ocfs2_ioctl that requires the BKL, so use unlocked_ioctl Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Improve rename lockingJan Kara
ocfs2_rename() was being too aggressive with the rename lock - we only need it for certain forms of directory rename. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18fs/ocfs2/aops.c: test for IS_ERR rather than 0Julia Lawall
The function ocfs2_start_trans always returns either a valid pointer or a value made with ERR_PTR, so its result should be tested with IS_ERR, not with a test for 0. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add inode stealing for ocfs2_reserve_new_inodeTao Ma
Inode allocation is modified to look in other nodes allocators during extreme out of space situations. We retry our own slot when space is freed back to the global bitmap, or whenever we've allocated more than 1024 inodes from another slot. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add ac_alloc_slot in ocfs2_alloc_contextTao Ma
In inode stealing, we no longer restrict the allocation to happen in the local node. So it is neccessary for us to add a new member in ocfs2_alloc_context to indicate which slot we are using for allocation. We also modify the process of local alloc so that this member can be used there also. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add a new parameter for ocfs2_reserve_suballoc_bitsTao Ma
In some cases(Inode stealing from other nodes), we may not want ocfs2_reserve_suballoc_bits to allocate new groups from the global_bitmap since it may already be full. So add a new parameter for this. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Enable cross extent block merge.Tao Ma
In ocfs2_figure_merge_contig_type, we judge whether there exists a cross extent block merge and enable it by setting CONTIG_LEFT and CONTIG_RIGHT accordingly. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add support for cross extent blockTao Ma
In ocfs2_merge_rec_left, when we find the merge extent is "CONTIG_RIGHT" with the first extent record of the next extent block, we will merge it to the next extent block and change all the related extent blocks accordingly. In ocfs2_merge_rec_right, when we find the merge extent is "CONTIG_LEFT" with the last extent record of the previous extent block, we will merge it to the prevoius extent block and change all the related extent blocks accordingly. As for CONTIG_LEFTRIGHT, we will handle CONTIG_RIGHT first so that when the index is zero, the merge process will be more efficient and easier. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Move /sys/o2cb to /sys/fs/o2cbMark Fasheh
/sys/fs is where we really want file system specific sysfs objects. Ocfs2-tools has been updated to look in /sys/fs/o2cb. We can maintain backwards compatibility with old ocfs2-tools by using a sysfs symlink. After some time (2 years), the symlink can be safely removed. This patch also adds documentation to make it easier for people to figure out what /sys/fs/o2cb is used for. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18sysfs: Allow removal of symlinks in the sysfs rootMark Fasheh
Allow callers of sysfs_remove_link() to pass a NULL kobj, in which case sysfs_root will be used as the parent directory. This allows us to tear down top level symlinks created via sysfs_create_link(), which already has similar handling of a NULL parent object. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-18ocfs2: Reconnect after idle time out.Tao Ma
Currently, o2net connects to a node on hb_up and disconnects on hb_down and net timeout. It disconnects on net timeout is ok, but it should attempt to reconnect back. This is because sometimes nodes get overloaded enough that the network connection breaks but the disk hb does not. And if we get into that situation, we either fence (unnecessarily) or wait for its disk hb to die (and sometimes hang in the process). So in this updated scheme, when the network disconnects, we keep attempting to reconnect till we succeed or we get a disk hb down event. If the other node is really dead, then we will eventually get a node down event. If not, we should be able to connect again and continue. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Cleanup lockres printSunil Mushran
A previous patch added KERN_NOTICE to printks printing the lockres that cluttered the output. This patch removes the log level. For people concerned with syslog clutter, please note we now use this facility to print lockres only during an error. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Fix lockname in lockres print functionSunil Mushran
__dlm_print_one_lock_resource was printing lockname incorrectly. Also, we now use printk directly instead of mlog as the latter prints the line context which is not useful for this print. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Move dlm_print_one_mle() from dlmmaster.c to dlmdebug.cSunil Mushran
This patch helps in consolidating debugging related functions in dlmdebug.c. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Dumps the purgelist into a debugfs fileSunil Mushran
This patch dumps all the lockres' on the purgelist it can fit in one page into a debugfs file. Useful for debugging. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Dumps the mles into a debugfs fileSunil Mushran
This patch dumps all mles it can fit in one page into a debugfs file. Useful for debugging. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Move struct dlm_master_list_entry to dlmcommon.hSunil Mushran
This patch moves some mle related definitions from dlmmaster.c to dlmcommon.h. Future patches need these definitions to dump mle debugging information. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.beckeroracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Dumps the lockres' into a debugfs fileSunil Mushran
This patch dumps all the lockres' alongwith all the locks into a debugfs file. Useful for debugging. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Dump the dlm state in a debugfs fileSunil Mushran
This patch dumps the dlm state (dlm_ctxt) into a debugfs file. Useful for debugging. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Create debugfs dirsSunil Mushran
This patch creates the debugfs directories that will hold the files to be used to dump the dlm state. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Link all lockres' to a tracking listSunil Mushran
This patch links all the lockres' to a tracking list in dlm_ctxt. We will use this in an upcoming patch that will walk the entire list and to dump the lockres states to a debugfs file. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Create slabcaches for lock and lockresSunil Mushran
This patch makes the o2dlm allocate memory for lockres, lockname and lock structures from slabcaches rather than kmalloc. This allows us to not only make these allocs more efficient but also allows us to track the memory being consumed by these structures. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Rename slabcache dlm_mle_cache to o2dlm_mleSunil Mushran
This patch renames dlm_mle_slabcache to prevent namespace clashes with fs/dlm. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Allow selection of cluster plug-ins.Joel Becker
ocfs2 now supports plug-ins for the classic O2CB stack as well as userspace cluster stacks in conjunction with fs/dlm. This allows zero, one, or both of the plug-ins to be selected in Kconfig. For local mounts (non-clustered), neither plug-in is needed. Both plugins can be loaded at one time, the runtime will select the one needed for the cluster systme in use. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add kbuild for ocfs2_stack_user.koJoel Becker
Add ocfs2_stack_user.ko to the Makefile so that it builds. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Change mlog_bug_on to BUG_ON in ocfs2_lockid.hJoel Becker
The masklog code is in the o2cb stack, but ocfs2_lockid.h now needs to be included by the user stack. The BUG() in ocfs2_lock_type_string() does not need masklog support, so change it to a regular BUG_ON(). Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: add fsdlm to stackglueDavid Teigland
Add code to use fs/dlm. [ Modified to be part of the stack_user module -- Joel ] Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add the 'set version' message to the ocfs2_control device.Joel Becker
The "SETV" message sets the filesystem locking protocol version as negotiated by the client. The client negotiates based on the maximum version advertised in /sys/fs/ocfs2/max_locking_protocol. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add the local node id to the handshake.Joel Becker
This is the second part of the ocfs2_control handshake. After negotiating the ocfs2_control protocol, the daemon tells the filesystem what the local node id is via the SETN message. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Introduce the DOWN message to ocfs2_controlJoel Becker
When the control daemon sees a node go down, it sends a DOWN message through the ocfs2_control device. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Start the ocfs2_control handshake.Joel Becker
When a control daemon opens the ocfs2_control device, it must perform a handshake to tell the filesystem it is something capable of monitoring cluster status. Only after the handshake is complete will the filesystem allow mounts. This is the first part of the handshake. The daemon reads all supported ocfs2_control protocols, then writes in the protocol it will use. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add the ocfs2_control misc device.Joel Becker
The ocfs2_control misc device is how a userspace control daemon (controld) talks to the filesystem. Introduce the bare-bones filesystem ops. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add the user stack module.Joel Becker
Add a skeleton for the stack_user module. It's just the barebones module code. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add the 'cluster_stack' sysfs file.Joel Becker
Userspace can now query and specify the cluster stack in use via the /sys/fs/ocfs2/cluster_stack file. By default, it is 'o2cb', which is the classic stack. Thus, old tools that do not know how to modify this file will work just fine. The stack cannot be modified if there is a live filesystem. ocfs2_cluster_connect() now takes the expected cluster stack as an argument. This way, the filesystem and the stack glue ensure they are speaking to the same backend. If the stack is 'o2cb', the o2cb stack plugin is used. For any other value, the fsdlm stack plugin is selected. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add the USERSPACE_STACK incompat bit.Joel Becker
The filesystem gains the USERSPACE_STACK incomat bit and the s_cluster_info field on the superblock. When a userspace stack is in use, the name of the stack is stored on-disk for mount-time verification. The "cluster_stack" option is added to mount(2) processing. The mount process needs to pass the matching stack name. If the passed name and the on-disk name do not match, the mount is failed. When using the classic o2cb stack, the incompat bit is *not* set and no mount option is used other than the usual heartbeat=local. Thus, the filesystem is compatible with older tools. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Create stack glue sysfs files.Joel Becker
Introduce a set of sysfs files that describe the current stack glue state. The files live under /sys/fs/ocfs2. The locking_protocol file displays the version of ocfs2's locking code. The loaded_cluster_plugins file displays all of the currently loaded stack plugins. When filesystems are mounted, the active_cluster_plugin file will display the plugin in use. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Break out stackglue into modules.Joel Becker
We define the ocfs2_stack_plugin structure to represent a stack driver. The o2cb stack code is split into stack_o2cb.c. This becomes the ocfs2_stack_o2cb.ko module. The stackglue generic functions are similarly split into the ocfs2_stackglue.ko module. This module now provides an interface to register drivers. The ocfs2_stack_o2cb driver registers itself. As part of this interface, ocfs2_stackglue can load drivers on demand. This is accomplished in ocfs2_cluster_connect(). ocfs2_cluster_disconnect() is now notified when a _hangup() is pending. If a hangup is pending, it will not release the driver module and will let _hangup() do that. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-04-18ocfs2: Create ocfs2_stack_operations and split out the o2cb stack.Joel Becker
Define the ocfs2_stack_operations structure. Build o2cb_stack_ops from all of the o2cb-specific stack functions. Change the generic stack glue functions to call the stack_ops instead of the o2cb functions directly. The o2cb functions are moved to stack_o2cb.c. The headers are cleaned up to where only needed headers are included. In this code, stackglue.c and stack_o2cb.c refer to some shared extern variables. When they become modules, that will change. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Split o2cb code from generic stack functions.Joel Becker
Split off the o2cb-specific funtionality from the generic stack glue calls. This is a precurser to wrapping the o2cb functionality in an operations vector. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Clean up stackglue initializationJoel Becker
The stack glue initialization function needs a better name so that it can be used cleanly when stackglue becomes a module. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Abstract out a debugging function for underlying dlms.Joel Becker
dlmglue.c was still referencing a raw o2dlm lksb in one instance. Let's create a generic ocfs2_dlm_dump_lksb() function. This allows underlying DLMs to print whatever they want about their lock. We then move the o2dlm dump into stackglue.c where it belongs. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: handle async EAGAIN from NOQUEUE requestDavid Teigland
When using fsdlm, -EAGAIN is returned in the async callback for NOQUEUE requests. Fix up dlmglue to expect this. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>