| Age | Commit message (Collapse) | Author |
|---|
|
As David Howells <dhowells@redhat.com> points out, binfmt_elf sometimes uses
off_t, sometimes uses loff_t. Use loff_t throughout.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Remove the atomic counter for slab_reclaim_pages and replace the counter
and NR_SLAB with two ZVC counter that account for unreclaimable and
reclaimable slab pages: NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE.
Change the check in vmscan.c to refer to to NR_SLAB_RECLAIMABLE. The
intend seems to be to check for slab pages that could be freed.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
CONFIG_HIGHMEM
Do not display HIGHMEM memory sizes if CONFIG_HIGHMEM is not set.
Make HIGHMEM dependent texts and make display of highmem counters optional
Some texts are depending on CONFIG_HIGHMEM.
Remove those strings and remove the display of highmem counter values if
CONFIG_HIGHMEM is not set.
[akpm@osdl.org: remove some ifdefs]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Tracking of dirty pages in shared writeable mmap()s.
The idea is simple: write protect clean shared writeable pages, catch the
write-fault, make writeable and set dirty. On page write-back clean all the
PTE dirty bits and write protect them once again.
The implementation is a tad harder, mainly because the default
backing_dev_info capabilities were too loosely maintained. Hence it is not
enough to test the backing_dev_info for cap_account_dirty.
The current heuristic is as follows, a VMA is eligible when:
- its shared writeable
(vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED)
- it is not a 'special' mapping
(vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0
- the backing_dev_info is cap_account_dirty
mapping_cap_account_dirty(vma->vm_file->f_mapping)
- f_op->mmap() didn't change the default page protection
Page from remap_pfn_range() are explicitly excluded because their COW
semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and
because they don't have a backing store anyway.
mprotect() is taught about the new behaviour as well. However it overrides
the last condition.
Cleaning the pages on write-back is done with page_mkclean() a new rmap call.
It can be called on any page, but is currently only implemented for mapped
pages, if the page is found the be of a VMA that accounts dirty pages it will
also wrprotect the PTE.
Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from
under ->private_lock. This seems to be safe, since ->private_lock is used to
serialize access to the buffers, not the page itself. This is needed because
clear_page_dirty() will call into page_mkclean() and would thereby violate
locking order.
[dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Original commit code assumes, that when a buffer on BJ_SyncData list is
locked, it is being written to disk. But this is not true and hence it can
lead to a potential data loss on crash. Also the code didn't count with
the fact that journal_dirty_data() can steal buffers from committing
transaction and hence could write buffers that no longer belong to the
committing transaction. Finally it could possibly happen that we tried
writing out one buffer several times.
The patch below tries to solve these problems by a complete rewrite of the
data commit code. We go through buffers on t_sync_datalist, lock buffers
needing write out and store them in an array. Buffers are also immediately
refiled to BJ_Locked list or unfiled (if the write out is completed). When
the array is full or we have to block on buffer lock, we submit all
accumulated buffers for IO.
[suitable for 2.6.18.x around the 2.6.19-rc2 timeframe]
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
If the timeout of an autofs mount is set to zero then umounts are disabled.
This works fine, however the kernel module checks the expire timeout and
goes no further if it is zero. This is not the right thing to do at
shutdown as the module is passed an option to expire mounts regardless of
their timeout setting.
This patch allows autofs to honor the force expire option.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
With this, we don't need to pass an additional struct with function pointer.
Now that the callbacks are fully used, comment the remaining API.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Have ocfs2_process_blocked_lock() call ocfs2_generic_unblock_lock(), which
gets to be ocfs2_unblock_lock() now that it's the only possible unblock
function.
Remove the ->unblock() callback from the structure, and all lock type
specific unblock functions.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
This way lock types don't have to manually pass it to
ocfs2_generic_unblock_lock().
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
The meta data unblocking code no longer needs ocfs2_do_unblock_meta() or
ocfs2_can_downconvert_meta_lock(), so remove them.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Fill in the ->check_downconvert and ->set_lvb callbacks with meta data
specific operations and switch ocfs2_unblock_meta() to call
ocfs2_generic_unblock_lock()
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
This allows a lock type to set the value block before downconvert.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
This will allow lock types to force a requeue of a lock downconvert.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Tidy up the exit path a bit too.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Allow a lock type to specifiy whether it makes use of the LVB. The only type
which does this right now is the meta data lock. This should save us some
space on network messages since they won't have to needlessly transmit value
blocks.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
There is extremely little difference between the two now. We can remove the
callback from ocfs2_lock_res_ops as well.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Will be used to find the ocfs2_super structure from a given lockres.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
This was always defined to the same function in all locks, so clean things
up by removing and passing ocfs2_unlock_ast() directly to the DLM.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
There is extremely little difference between the two now. We can remove the
callback from ocfs2_lock_res_ops as well.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Use of the refresh mechanism is lock-type wide, so move knowledge of that to
the ocfs2_lock_res_ops structure.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
OCFS2 puts inode meta data in the "lock value block" provided by the DLM.
Typically, i_generation is encoded in the lock name so that a deleted inode
on and a new one in the same block don't share the same lvb.
Unfortunately, that scheme means that the read in ocfs2_read_locked_inode()
is potentially thrown away as soon as the meta data lock is taken - we
cannot encode the lock name without first knowing i_generation, which
requires a disk read.
This patch encodes i_generation in the inode meta data lvb, and removes the
value from the inode meta data lock name. This way, the read can be covered
by a lock, and at the same time we can distinguish between an up to date and
a stale LVB.
This will help cold-cache stat(2) performance in particular.
Since this patch changes the protocol version, we take the opportunity to do
a minor re-organization of two of the LVB fields.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
When i_generation is removed from the lockname, this will help us determine
whether a meta data lvb has information that is in sync with the local
struct inode.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
lvb_version doesn't need to be a whole 32 bits. Make it an 8 bit field to
free up some space. This should be backwards compatible until we use one of
the fields, in which case we'd bump the lvb version anyway.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
We can't use LKM_LOCAL for new dentry locks because an unlink and subsequent
re-create of a name/inode pair may result in the lock still being mastered
somewhere in the cluster.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Make use of FS_RENAME_DOES_D_MOVE to avoid a race condition that can occur
during ->rename() if we d_move() outside of the parent directory cluster
locks, and another node discovers the new name (created during the rename)
and unlinks it. d_move() will unconditionally rehash a dentry - which will
leave stale data in the system.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Some file systems want to manually d_move() the dentries involved in a
rename. We can do this by making use of the FS_ODD_RENAME flag if we just
have nfs_rename() unconditionally do the d_move(). While there, we rename
the flag to be more descriptive.
OCFS2 uses this to protect that part of the rename operation with a cluster
lock.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
|
|
This is unused now.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Actually replace the vote calls with the new dentry operations. Make any
necessary adjustments to get the scheme to work.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Replace the dentry vote mechanism with a cluster lock which covers a set
of dentries. This allows us to force d_delete() only on nodes which actually
care about an unlink.
Every node that does a ->lookup() gets a read only lock on the dentry, until
an unlink during which the unlinking node, will request an exclusive lock,
forcing the other nodes who care about that dentry to d_delete() it. The
effect is that we retain a very lightweight ->d_revalidate(), and at the
same time get to make large improvements to the average case performance of
the ocfs2 unlink and rename operations.
This patch adds the higher level API and the dentry manipulation code.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Replace the dentry vote mechanism with a cluster lock which covers a set
of dentries. This allows us to force d_delete() only on nodes which actually
care about an unlink.
Every node that does a ->lookup() gets a read only lock on the dentry, until
an unlink during which the unlinking node, will request an exclusive lock,
forcing the other nodes who care about that dentry to d_delete() it. The
effect is that we retain a very lightweight ->d_revalidate(), and at the
same time get to make large improvements to the average case performance of
the ocfs2 unlink and rename operations.
This patch adds the cluster lock type which OCFS2 can attach to
dentries. A small number of fs/ocfs2/dcache.c functions are stubbed
out so that this change can compile.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
File system lock names are very regular right now, so we really only need to
pass an extra parameter to dlmlock().
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
We just need to add a namelen field to the user_lock_res structure, and
update a few debug prints. Instead of updating all debug prints, I took the
opportunity to remove a few that are likely unnecessary these days.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
The OCFS2 DLM uses strlen() to determine lock name length, which excludes
the possibility of putting binary values in the name string. Fix this by
requiring that string length be passed in as a parameter.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
An AST can be delivered via the network after a lock has been removed, so no
need to print an error when we see that.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Remove the EXPERIMENTAL flag from the NFS_DIRECTIO option.
Test plan:
Unset the EXPERIMENTAL kernel build option and check to see that the NFS
direct I/O option is still available.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Comments-only change to clarify a detail of the NFS protocol and how it is
implemented in Linux.
Test plan:
None.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
RFC3530 states that the registered port 2049 for the NFS protocol should be
the default configuration in order to allow clients not to use the RPC
binding protocols.
If the mount program sends us a port=0, we therefore substitute port=2049.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Change the initial retry delay from 1s to 0.1s (and then back off
exponentially).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Retry a few times before we give up: the error is usually due to ordering
issues with asynchronous RPC calls.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
And slight optimisation of nfs_end_data_update(): directories never have
delegations anyway.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Currently, a read() request will return EIO even if the file has been
deleted on the server, simply because that is what the VM will return
if the call to readpage() fails to update the page.
Ensure that readpage() marks the inode as stale if it receives an ESTALE.
Then return that error to userland.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If the open intents tell us that a given lookup is going to result in a,
exclusive create, we currently optimize away the lookup call itself. The
reason is that the lookup would not be atomic with the create RPC call, so
why do it in the first place?
A problem occurs, however, if the VFS aborts the exclusive create operation
after the lookup, but before the call to create the file/directory: in this
case we will end up with a hashed negative dentry in the dcache that has
never been looked up.
Fix this by only actually hashing the dentry once the create operation has
been successfully completed.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Fix an oops when the referral server is not responding.
Check the error return from nfs4_set_client() in nfs4_create_referral_server.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Teach NFS_ROOT to use the new rpc_create API instead of the old two-call
API for creating an RPC transport.
Test plan:
Compile the kernel with the NFS client build-in, and set CONFIG_NFS_ROOT.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Fix up warnings from compiling on ppc64.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
