aboutsummaryrefslogtreecommitdiff
path: root/include/asm-arm/arch-pxa
AgeCommit message (Collapse)Author
2007-06-02[ARM] 4422/1: Fix default value handling in gpio_direction_output (PXA)Bill Gatliff
The default value passed through to pxa_gpio_mode() is lost due to a missing GPIO_DFLT_HIGH mask for nonzero values. The enclosed patch fixes this programming error. Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-06Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits) [ARM] Add comments marking in-use ptrace numbers [ARM] Move syscall saving out of the way of utrace [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header [ARM] mm 10: allow memory type to be specified with ioremap [ARM] mm 9: add additional device memory types [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6 [ARM] iop: add missing parens in macro [ARM] mm 7: remove duplicated __ioremap() prototypes ARM: OMAP: fix OMAP1 mpuio suspend/resume oops ARM: OMAP: MPUIO wake updates ARM: OMAP: speed up gpio irq handling ARM: OMAP: plat-omap changes for 2430 SDP ARM: OMAP: gpio object shrinkage, cleanup ARM: OMAP: /sys/kernel/debug/omap_gpio ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon ARM: OMAP: Enable 24xx GPIO autoidling [ARM] 4318/2: DSM-G600 Board Support [ARM] 4227/1: minor head.S fixups [ARM] 4328/1: Move i.MX UART regs to driver ...
2007-05-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (46 commits) mmc-omap: Clean up omap set_ios and make MMC_POWER_ON work mmc-omap: Fix omap to use MMC_POWER_ON mmc-omap: add missing '\n' mmc: make tifm_sd_set_dma_data() static mmc: remove old card states mmc: support unsafe resume of cards mmc: separate out reading EXT_CSD mmc: break apart switch function MMC: Fix handling of low-voltage cards MMC: Consolidate voltage definitions mmc: add bus handler wbsd: check for data opcode earlier mmc: Separate out protocol ops mmc: Move core functions to subdir mmc: deprecate mmc bus topology mmc: remove card upon suspend mmc: allow suspended block driver to be removed mmc: Flush pending detects on host removal mmc: Move host and card drivers to subdirs mmc: Move queue functions to mmc_block ...
2007-05-01mmc: Move OCR bit definesPierre Ossman
All host drivers were #include:ing mmc/protocol.h just to get access to the OCR bit defines. Move these to host.h instead. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov
Conflicts: drivers/usb/input/Makefile drivers/usb/input/gtco.c
2007-04-21[ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXXEric Miao
This patch removes the unnecessary bit number from CKENnn_XXXX definitions for PXA, so that CKEN0_PWM0 --> CKEN_PWM0 CKEN1_PWM1 --> CKEN_PWM1 ... CKEN24_CAMERA --> CKEN_CAMERA The reasons for the change of these defitions are: 1. they do not scale - they are currently valid for pxa2xx, but definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera instead of bit 24 2. they are unnecessary - the peripheral name within the definition has already announced its usage, we don't need those bit numbers to know which peripheral we are going to enable/disable clock for 3. they are inconvenient - think about this: a driver programmer for pxa has to remember which bit in the CKEN register to turn on/off Another change in the patch is to make the definitions equal to its clock bit index, so that #define CKEN_CAMERA (24) instead of #define CKEN_CAMERA (1 << 24) this change, however, will add a run-time bit shift operation in pxa_set_cken(), but the benefit of this change is that it scales when bit index exceeds 32, e.g., pxa3xx has two registers CKENA and CKENB, totally 64 bit for this, suppose CAMERA clock enabling bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10) and so that pxa_set_cken() need minimum change to adapt to that. Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21[ARM] 4246/1: i2c-pxa: add adapter class to platform specific dataMatej Kenda
Reposted patch for kernel 2.6.21-rc2. The driver i2c-pxa doesn't set the class member in i2c_adapter, which is used to register the I2C adapter. The hwmon (sensors) drivers (e.g. adm1021) that are connected to a i2c-pxa adapter don't attach because they expect that the adapter supports class I2C_CLASS_HWMON. This patch adds functionality to allow platforms to set the class and pass it as platform_data to the i2c-pxa driver. Sample usage in platform code: static struct i2c_pxa_platform_data my_i2c_platform_data = { .class = I2C_CLASS_HWMON }; static void __init my_platform_init(void) { (void) platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_i2c_info(&my_i2c_platform_data); } Signed-off-by: Matej Kenda <matej.kenda@hermes-softlab.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-24Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4278/1: configure pxa27x I2C SCL as "input" [ARM] 4272/1: Missing symbol h1940_pm_return fix [ARM] 4235/1: ns9xxx: declare the clock functions as "const" [ARM] 4271/1: iop32x: fix ep80219 detection (support iq80219 platforms) [ARM] 4270/2: mach-s3c2443/irq.c off by one error in dma irqs
2007-03-24[ARM] 4278/1: configure pxa27x I2C SCL as "input"Guennadi Liakhovetski
It has been reported by Julian Deng that configuring the pxa27x i2c SCL line as output generates a short negative pulse on it during the call to pxa_gpio_mode(GPIO117_I2CSCL_MD); as it first switches it to output and then configures it for the alternate function. The SCL line is in fact bidirectional and can also be configured as 117 | GPIO_ALT_FN_1_IN, in which case the pulse is not generated. This is exactly what this patch does. Author: Julian Deng <dengtj@sitek.cn> Signed-off-by: G. Liakhovetski <gl@dsa-ac.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-16[PATCH] gpio_direction_output() needs an initial valueDavid Brownell
It's been pointed out that output GPIOs should have an initial value, to avoid signal glitching ... among other things, it can be some time before a driver is ready. This patch corrects that oversight, fixing - documentation - platforms supporting the GPIO interface - users of that call (just one for now, others are pending) There's only one user of this call for now since most platforms are still using non-generic GPIO setup code, which in most cases already couples the initial value with its "set output mode" request. Note that most platforms are clear about the hardware letting the output value be set before the pin direction is changed, but the s3c241x docs are vague on that topic ... so those chips might not avoid the glitches. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <andrew@sanpeople.com> Acked-by: Milan Svoboda <msvoboda@ra.rockwell.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-16Input: add support for PXA27x keyboard controllerRodolfo Giometti
Signed-off-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-20[PATCH] GPIO API: PXA wrapper cleanupPhilipp Zabel
Based on the discussion last december (http://lkml.org/lkml/2006/12/20/242), this patch: - moves the PXA_LAST_GPIO check into pxa_gpio_mode - fixes comment and includes in gpio.h - replaces the gpio_set/get_value macros with inline functions and adds a non-inline version to avoid code explosion when gpio is not a constant. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Nicolas Pitre <nico@cam.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20Merge ARM fixesRussell King
2007-02-20[ARM] Merge remaining IOP codeRussell King
Conflicts: include/asm-arm/arch-at91rm9200/entry-macro.S Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-19Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (117 commits) [ARM] 4058/2: iop32x: set ->broken_parity_status on n2100 onboard r8169 ports [ARM] 4140/1: AACI stability add ac97 timeout and retries [ARM] 4139/1: AACI record support [ARM] 4138/1: AACI: multiple channel support for IRQ handling [ARM] 4211/1: Provide a defconfig for ns9xxx [ARM] 4210/1: base for new machine type "NetSilicon NS9360" [ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PM [ARM] 4221/1: S3C2443: DMA support [ARM] 4220/1: S3C24XX: DMA system initialised from sysdev [ARM] 4219/1: S3C2443: DMA source definitions [ARM] 4218/1: S3C2412: fix CONFIG_CPU_S3C2412_ONLY wrt to S3C2443 [ARM] 4217/1: S3C24XX: remove the dma channel show at startup [ARM] 4090/2: avoid clash between PXA and SA1111 defines [ARM] 4216/1: add .gitignore entries for ARM specific files [ARM] 4214/2: S3C2410: Add Armzone QT2410 [ARM] 4215/1: s3c2410 usb device: per-platform vbus_draw [ARM] 4213/1: S3C2410 - Update definition of ADCTSC_XY_PST [ARM] 4098/1: ARM: rtc_lock only used with rtc_cmos [ARM] 4137/1: Add kexec support [ARM] 4201/1: SMP barriers pair needed for the secondary boot process ... Fix up conflict due to typedef removal in sound/arm/aaci.h
2007-02-17Merge AT91, EP93xx, General devel, PXA, S3C, V6+ and Xscale treesRussell King
2007-02-17[ARM] 4185/2: entry: introduce get_irqnr_preamble and arch_ret_to_userDan Williams
get_irqnr_preamble allows machines to take some action before entering the get_irqnr_and_base loop. On iop we enable cp6 access. arch_ret_to_user is added to the userspace return path to allow individual architectures to take actions, like disabling coprocessor access, before the final return to userspace. Per Nicolas Pitre's note, there is no need to cp_wait on the return to user as the latency to return is sufficient. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4090/2: avoid clash between PXA and SA1111 definesNicolas Pitre
The Lubbock platform uses both a PXA25x and a SA1111 at the same time. Both chips have the same "Serial Audio Controller" registers although the SA1111 one is never expected to be used in preference to the PXA25x one. So let's disable the SA1111 defines whenever compilation is for a PXA architecture and make the PXA defines always defined. This removes a bunch of "already defined" warnings as well since the current hack to prevent them depended on include ordering which wasn't always right. While at it, clean up the SA1111 defines allowing to get rid of the __CCREG() macro. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-12[PATCH] PXA GPIO wrappersPhilipp Zabel
Arch-neutral GPIO calls for PXA. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-08[ARM] 4152/1: Add PXA SSP audio register defs and fixupsLiam Girdwood
This patchs adds some missing register bit defs for the PXA SSP ports audio registers and fixes up some other broken bit definitions as noticed by Russell. Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08[ARM] 4141/1: consolidate functions that handles gpio in pxa2xx_udcMilan Svoboda
This patch renames pxa_gpio_set/get functions defined in drivers/usb/gadget/pxa2xx_udc.h to udc_gpio_set/get. These functions are moved from drivers/usb/gadget/pxa2xx_udc.h to include/asm-arm/arch-pxa2xx/udc.h Creates new functions: udc_gpio_to_irq, udc_gpio_init_vbus, udc_gpio_init_pullup in include/asm-arm/arch-pxa2xx/udc.h. These functions are used in drivers/usb/gadget/pxa2xx_udc.c instead of direct low-level (pxa2xx only) functions. Creates all these udc_gpio_* functions in include/asm-arm/arch-ixp4xx/udc.h. This implementation has no real code because ixp4xx doesn't use vbus - only vbus uses all these gpio functions (and because ixp4xx misses any function which converts number of gpio pin into it's irq). This is next step to make pxa2xx_udc fully work on ixp4xx platform. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-02[ARM] 4081/1: Add definition for TI Sync Serial ProtocolPhilipp Zabel
Of the possible SSP frame formats (FRF bits in SSCR0), only SSCR0_PSP is defined. Other possible formats are Motorola SPI (0<<4), TI SSP (1<<4) and Microwire (2<<4). Attached patch adds a definition SSCR0_TISSP. This mode is used for the sound codec attached to the PXA272 SSP1 of some HTC PDA phones. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-02[ARM] 4080/1: Fix for the SSCR0_SlotsPerFrm macroPhilipp Zabel
The SSCR0_SlotsPerFrm macro writes a 3-bit value to bits [2:0], while the correct location of FRDC in SSCR0 is at bits [26:24]. This patch adds the missing "<< 24". Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-10[PATCH] spi: stabilize PIO mode transfers on PXA2xx systemsStephen Street
Stabilize PIO mode transfers against a range of word sizes and FIFO thresholds and fixes word size setup/override issues. 1) 16 and 32 bit DMA/PIO transfers broken due to timing differences. 2) Potential for bad transfer counts due to transfer size assumptions. 3) Setup function broken is multiple ways. 4) Per transfer bit_per_word changes break DMA setup in pump_tranfers. 5) False positive timeout are not errors. 6) Changes in pxa2xx_spi_chip not effective in calls to setup. 7) Timeout scaling wrong for PXA255 NSSP. 8) Driver leaks memory while busy during unloading. Known issues: SPI_CS_HIGH and SPI_LSB_FIRST settings in struct spi_device are not handled. Testing: This patch has been test against the "random length, random bits/word, random data (verified on loopback) and stepped baud rate by octaves (3.6MHz to 115kHz)" test. It is robust in PIO mode, using any combination of tx and rx thresholds, and also in DMA mode (which internally computes the thresholds). Much thanks to Ned Forrester for exhaustive reviews, fixes and testing. The driver is substantially better for his efforts. Signed-off-by: Stephen Street <stephen@streetfiresound.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[ARM] Merge individual ARM sub-treesRussell King
Merge: Atmel AT91RM9200 and AT91SAM9260 changes General ARM developments Disconfiguous memory cleanups 64-bit/32-bit division and sched_clock extension patches EP93xx support changes IOP support changes Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] Clean up discontigmem supportRussell King
Most architectures have fairly simple discontiguous memory - a simple set of successive regions each containing some memory. These can be described simply as a log2 of their maximum size, along with the base address of the first region and the number of regions. The base address is already described by PHYS_PFN_OFFSET, and the number of regions via the MAX_NUMNODES and the number of online nodes. If we then supply the log2 of their maximum size, all the other discontigmem macros can move into generic code. There is one exception: lh7a40x seems to have a more complicated setup; this is left alone. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] 3894/1: pxa27x: Update DCSR_EORINTR bit definition in DCSRstanley cai
This patch updates a bit definition name to align with the PXA27x spec.EORINTR(End-Of-Receive Intr) bit in DCSR register (DMA Channel Control/Status Register) Signed-off-by: Stanley Cai <stanley.w.cai@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] 3893/1: pxa27x: Update UDCISR1 bit definitionsstanley cai
This patch updates several bit definitions name in UDCISR1 register. Signed-off-by: Stanley Cai <stanley.w.cai@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-29[ARM] 3943/1: share declaration of struct pxa2xx_udc_mach_info between ↵Milan Svoboda
multiple platforms Move declaration of struct pxa2xx_udc_mach_info from include/asm-arm/arch-pxa/udc.h to new file include/asm-arm/mach/udc_pxa2xx.h. This allow us to use this structure with multiple platforms - pxa and ixp4xx. USB device controller used in pxa25x is the same as controller used in ixp4xx. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3919/1: Fixed definition of some PXA270 CIF related registersEnrico Scholz
Fixed definition of some CIF registers; see PXA27x Developer\'s Manual. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-24[ARM] 3902/1: Enable GPIO81-84 on PXA255Craig Hughes
The PXA255 has 84 GPIO lines available. This patch allows access to 81-84 Signed-off-by: Craig Hughes <craig@gumstix.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-14[ARM] 3888/1: add pxa27x SSP FSRT register bit definitionLiam Girdwood
This patch adds a register bit definition for the pxa27x SSP port Frame Sync Relative Timing (FSRT) bit. Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-09IRQ: Use the new typedef for interrupt handler function pointersDavid Howells
Use the new typedef for interrupt handler function pointers rather than actually spelling out the full thing each time. This was scripted with the following small shell script: #!/bin/sh egrep -nHrl -e 'irqreturn_t[ ]*[(][*]' $* | while read i do echo $i perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $? done Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-06Initial blind fixup for arm for irq changesLinus Torvalds
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02[ARM] 3848/1: pxafb: Add option of fixing video modes and spitz QVGA mode ↵Richard Purdie
support Add the ability to have pxafb use only certain fixed video modes (selected on a per platform basis). This is useful on production hardware such as the Zaurus cxx00 models where the valid modes are known in advance and any other modes could result in hardware damage. Following this, add support for the cxx00 QVGA mode. Mode information is passed to the lcd_power call to allowing the panel drivers to configure the display hardware accordingly (corgi_lcd already contains the functionality for the cxx00 panel). This mirrors the setup already used by w100fb. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27USB: pxa2xx_udc understands GPIO based VBUS sensingDavid Brownell
This updates the PXA 25x UDC board-independent infrastructure for VBUS sensing and the D+ pullup. The original code evolved from rather bizarre support on Intel's "Lubbock" reference hardware, so that on more sensible hardware it doesn't work as well as it could/should. The change is just to teach the UDC driver how to use built-in PXA GPIO pins directly. This reduces the amount of board-specfic object code needed, and enables the use of a VBUS sensing IRQ on boards (like Gumstix) that have one. With VBUS sensing, the UDC is unclocked until a host is actually connected. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-27[ARM] 3760/1: This patch adds timeouts while working with SSP registers. ↵Paul Sokolovsky
Such timeouts were en Patch from Paul Sokolovsky This patch adds timeouts while working with SSP registers. Such timeouts were envisioned by docstrings in ssp.c, but were not implemented. There were actual lockups while accessing touchscreen for iPaqs h1910, h4000 due to lack of the timeouts. This is updated version of previously submitted patch: 3738/1. Signed-off-by: Paul Sokolovsky <pmiscml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29[ARM] 3666/1: TRIZEPS4 [1/5] coreJürgen Schindele
Patch from Jürgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jürgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24[ARM] 3631/1: Remove legacy __mem_isa() definitionsAndrew Victor
Patch from Andrew Victor Remove the remaining legacy __mem_isa() definitions for the ARM platforms. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (42 commits) [ARM] Fix tosa build error [ARM] 3610/1: Make reboot work on Versatile [ARM] 3609/1: S3C24XX: defconfig update for s3c2410_defconfig [ARM] 3591/1: Anubis: IDE device definitions [ARM] Include asm/hardware.h not asm/arch/hardware.h [ARM] 3594/1: Poodle: Add touchscreen support + other updates [ARM] 3564/1: sharpsl_pm: Abstract some machine specific parameters [ARM] 3561/1: Poodle: Correct the MMC/SD power control [ARM] 3593/1: Add reboot and shutdown handlers for Zaurus handhelds [ARM] 3599/1: AT91RM9200 remove global variables [ARM] 3607/1: AT91RM9200 misc fixes [ARM] 3605/1: AT91RM9200 Power Management [ARM] 3604/1: AT91RM9200 New boards [ARM] 3603/1: AT91RM9200 remove old files [ARM] 3592/1: AT91RM9200 Serial driver update [ARM] 3590/1: AT91RM9200 Platform devices support [ARM] 3589/1: AT91RM9200 DK/EK board update [ARM] 3588/1: AT91RM9200 CSB337/637 board update [ARM] 3587/1: AT91RM9200 hardware headers [ARM] 3586/1: AT91RM9200 header update ...
2006-06-20Merge git://git.infradead.org/hdrcleanup-2.6Linus Torvalds
* git://git.infradead.org/hdrcleanup-2.6: (63 commits) [S390] __FD_foo definitions. Switch to __s32 types in joystick.h instead of C99 types for consistency. Add <sys/types.h> to headers included for userspace in <linux/input.h> Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.h Remove struct fddi_statistics from user view in <linux/if_fddi.h> Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390 Revert include/media changes: Mauro says those ioctls are only used in-kernel(!) Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h> Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> too Remove private struct dx_hash_info from public view in <linux/ext3_fs.h> Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h> Use __uXX types in <linux/divert.h> for struct divert_blk et al. Use __u32 for elf_addr_t in <asm-powerpc/elf.h>, not u32. It's user-visible. Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirely Use __uXX types in user-visible structures in <linux/nbd.h> Don't use 'u32' in user-visible struct ip_conntrack_old_tuple. Use __uXX types for S390 DASD volume label definitions which are user-visible S390 BIODASDREADCMB ioctl should use __u64 not u64 type. Remove unneeded inclusion of <linux/time.h> from <linux/ufs_fs.h> Fix private integer types used in V4L2 ioctls. ... Manually resolve conflict in include/linux/mtd/physmap.h
2006-06-20Merge Zaurus branchRussell King
2006-06-20[ARM] 3606/1: PXA27x SSP Register definitionsLiam Girdwood
Patch from Liam Girdwood This patch adds some new PXA27x SSP port registers and also fixes the SSP slots per frame macro Changes:- o SSCR0_SlotPerFrm fixed o Added SSP port TSA, RSA, TSS and ACD registers Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3594/1: Poodle: Add touchscreen support + other updatesRichard Purdie
Patch from Richard Purdie Poodle Updates: * Update corgi_ssp to make the GPIO chip selects optional * Enable corgi_ssp for use by poodle * Add corgi touchscreen platform device for poodle * Export locomo platform device. * Set framebuffer device parent correctly Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3561/1: Poodle: Correct the MMC/SD power controlRichard Purdie
Patch from Richard Purdie Correct the Poodle power control for the MMC/SD port. Also add write protection switch support. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3593/1: Add reboot and shutdown handlers for Zaurus handheldsRichard Purdie
Patch from Richard Purdie Add functionality to allow machine specific reboot handlers on ARM. Add machine specific reboot and poweroff handlers for all PXA Zaurus models. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-08[ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budgetRichard Purdie
Patch from Richard Purdie Add a power budget variable to the PXA OHCI platform data and add a default value for the spitz platform(s) which prevents known failures with certain USB devices. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-24Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/asm-powerpc/unistd.h include/asm-sparc/unistd.h include/asm-sparc64/unistd.h Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21[PATCH] pxa2xx-spi updateStephen Street
Fix some outstanding issues with the pxa2xx_spi driver when running on a PXA270: - Wrong timeout calculation in the setup function due to different peripheral clock rates in the PXAxxx family. - Bad handling of SSSR_TFS interrupts in interrupt_transfer function. - Added locking to interface between the pump_messages workqueue and the pump_transfers tasklet. Much thanks to Juergen Beisert for the extensive testing on the PXA270. Signed-off-by: Stephen Street <stephen@streetfiresound.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-16[PATCH] SPI: add PXA2xx SSP SPI DriverStephen Street
This driver turns a PXA2xx synchronous serial port (SSP) into a SPI master controller (see Documentation/spi/spi_summary). The driver has the following features: - Support for any PXA2xx SSP - SSP PIO and SSP DMA data transfers. - External and Internal (SSPFRM) chip selects. - Per slave device (chip) configuration. - Full suspend, freeze, resume support. Signed-off-by: Stephen Street <stephen@streetfiresound.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>