aboutsummaryrefslogtreecommitdiff
path: root/include/asm-arm
AgeCommit message (Collapse)Author
2006-09-27[ARM] Separate page table manipulation code from bootmem initialisationRussell King
nommu does not require the page table manipulation code in the bootmem initialisation paths. Move this into separate inline functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] 3859/1: Fix devicemaps_init() XIP_KERNEL odd 1MiB XIP_PHYS_ADDR ↵George G. Davis
translation error The ARM XIP_KERNEL map created in devicemaps_init() is wrong. The map.pfn is rounded down to an even 1MiB section boundary which results in va/pa translations errors when XIP_PHYS_ADDR starts on an odd 1MiB boundary and this causes the kernel to hang. This patch fixes ARM XIP_KERNEL translation errors for the odd 1MiB XIP_PHYS_ADDR boundary case. Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-26[PATCH] Standardize pxx_page macrosDave McCracken
One of the changes necessary for shared page tables is to standardize the pxx_page macros. pte_page and pmd_page have always returned the struct page associated with their entry, while pte_page_kernel and pmd_page_kernel have returned the kernel virtual address. pud_page and pgd_page, on the other hand, return the kernel virtual address. Shared page tables needs pud_page and pgd_page to return the actual page structures. There are very few actual users of these functions, so it is simple to standardize their usage. Since this is basic cleanup, I am submitting these changes as a standalone patch. Per Hugh Dickins' comments about it, I am also changing the pxx_page_kernel macros to pxx_page_vaddr to clarify their meaning. Signed-off-by: Dave McCracken <dmccr@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-25ARM: OMAP: Sync clocks with linux-omap treeTony Lindgren
Mostly clean up CONFIG_OMAP_RESET_CLOCKS. Also includes a patch from Imre Deak to make McSPI clocks use id. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Sync DMA with linux-omap treeTony Lindgren
This patch syncs OMAP DMA code with linux-omap tree. Mostly allow changing DMA callback function and set OMAP2 specific transfer mode. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Add enable/disable functions for dmtimerTimo Teras
Add enable/disable functions which effectively control the GPT iclk and fclk. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: DMA source and destination addresses are unsignedTony Lindgren
Also export some omap24xx specific DMA functions. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP2: Dynamic allocator for GPMC memory spaceImre Deak
Add support for assigning memory regions dynamically to peripherals attached to GPMC interface. Platform specific code should now call gpmc_cs_request to get a free GPMC memory region instead of using a fixed address. Make the H4 and Apollon platform initialization use the new API. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Add some extra #defines for Amstrad DeltaJonathan McDowell
This patch adds some further #defines regarding GPIOs and latch bits for the Amstrad Delta; the drivers that use them will be submitted at a later date but there's no reason not to have the information already there and available for use. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: mux: add config for 16xx SPI pinsMark Howell
This patch adds pin mux info for the SPI master/slave interface on OMAP16xx. Data from OMAP 1611/1612 TRM and errata. Works for me on my 1611/H2 with current git kernel. Signed-off-by: Mark Howell <mhowell@northlink.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Apollon MMC supportKyungmin Park
Apollon board MMC supports on OMAP2 TODO: We have to check MMC on H4 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Added OMAP24xx camera IRQ definitionSamuel Ortiz
Signed-off-by: Samuel Ortiz <samuel.ortiz@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25[ARM] 3852/1: convert atomic bitops and __xchg over to ↵Lennert Buytenhek
raw_local_irq_{save,restore} Thomas Gleixner noticed that bitops.h should also use the raw_* irq disable/enable variants, and __xchg needs them as well. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3851/1: iop3xx: add io-data glantank supportLennert Buytenhek
Add support for the IO-Data GLAN Tank, from Martin Michlmayr. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3850/1: iop3xx: add thecus n2100 supportLennert Buytenhek
Add support for the Thecus n2100 (80219-based.) Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3849/1: fix get_unaligned() for gcc >= 4.1Lennert Buytenhek
gcc 4.1's __typeof__ propagates 'const', which breaks get_unaligned(). Rewrite get_unaligned() not to use __typeof__. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3846/1: S3C24XX: Fix osiris memory mapBen Dooks
The memory mapping for the Osiris machine are all off by one bit, and the base address has been fixed for writing (bit25 is being checked by the write, but not on read) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3832/1: iop3xx: coding style cleanupLennert Buytenhek
Since the iop32x code isn't iop321-specific, and the iop33x code isn't iop331-specfic, do a s/iop321/iop32x/ and s/iop331/iop33x/, and tidy up the code to conform to the coding style guidelines somewhat better. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3831/1: iop3xx: factor out common register definesLennert Buytenhek
Factor out the register defines for a number of other peripherals common to the iop32x and iop33x. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3830/1: iop3xx: board support file cleanupLennert Buytenhek
Revamp the iop3xx board support: move the support code for each iop board type into its own file, start using platform serial and platform physmap flash devices, switch to a per-board time tick rate, and get rid of the ARCH_EP80219 and STEPD config options by doing the relevant checks at run time. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3829/1: iop3xx: optimise irq entry macrosLennert Buytenhek
Squeeze three instructions out of the iop32x irq demuxer, and nine out of the iop33x irq demuxer by using the hardware vector generator. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3827/1: iop3xx: add common gpio moduleLennert Buytenhek
Implement the gpio_line_{config,get,set} API for iop3xx. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3826/1: iop3xx: remove IOP3??_IRQ_OFS irq offsetLennert Buytenhek
Get rid of the unused IOP3??_IRQ_OFS irq offset define, start IRQ numbering from zero. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3825/1: iop3xx: use cp6 enable/disable macrosLennert Buytenhek
Add CP6 enable/disable sequences to the timekeeping code and the IRQ code. As a result, we can't depend on CP6 access being enabled when we enter get_irqnr_and_base anymore, so switch the latter over to using memory-mapped accesses for now. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3824/1: iop3xx: add cp6 enable/disable macrosLennert Buytenhek
Add macros to enable and disable access to CP6. On the iop3xx, enabling CP6 access unfortunately also enables access to that coprocessor from unprivileged code, so we need these macros to enable and disable access to the coprocessor whenever we need to access it. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3823/1: iop3xx: switch iop32x/iop33x over to shared time codeLennert Buytenhek
Switch the iop32x and iop33x code over to the common time implementation, and remove the (nearly identical) iop32x and iop33x time implementations. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3822/1: iop3xx: rewrite time handlingLennert Buytenhek
Merge and rewrite the iop32x/iop33x time code to do lost jiffy tracking properly, and put the result in plat-iop/time.c. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3821/1: iop3xx: switch iop32x/iop33x over to shared pci codeLennert Buytenhek
Switch the iop32x and iop33x code over to the common PCI implementation, and remove the (nearly identical) iop32x and iop33x PCI implementations. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3820/1: iop3xx: factor out shared pci codeLennert Buytenhek
Merge the iop32x PCI code and iop33x PCI code into plat-iop/pci.c. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3819/1: iop3xx: factor out shared i2c codeLennert Buytenhek
Move the i2c bits shared between iop32x and iop33x to plat-iop/i2c.c and include/asm-arm/hardware/iop3xx.h. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3818/1: iop3xx: introduce arch/arm/plat-iop for shared iop32x/iop33x codeLennert Buytenhek
Introduce the arch/arm/plat-iop directory, for code shared between the iop32x and iop33x, and move the common memory map setup bits there. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3817/1: iop3xx: split the iop3xx mach into iop32x and iop33xLennert Buytenhek
Split the iop3xx mach type into iop32x and iop33x -- split the config symbols, and move the code in the mach-iop3xx directory to the mach-iop32x and mach-iop33x directories. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3816/1: iop3xx: rename config symbolsLennert Buytenhek
Rename CONFIG_ARCH_IOP321 to CONFIG_ARCH_IOP32X and CONFIG_ARCH_IOP331 to CONFIG_ARCH_IOP33X. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3800/2: S3C2412: DMA channel mappingsBen Dooks
DMA channel mappings for the S3C2312 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3813/1: prevent >= 4G /dev/mem mmap()Lennert Buytenhek
Prevent userland from mapping in physical address regions >= 4G by checking for that in valid_mmap_phys_addr_range(). Unfortunately, we cannot override valid_mmap_phys_addr_range() without also overriding valid_phys_addr_range(), so copy drivers/char/mem.c's version of valid_phys_addr_range() over to arch/arm/mm/mmap.c as well. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3810/1: switch atomic helpers over to raw_local_irq_{save,restore}Lennert Buytenhek
Now that we have raw_* variants of local_irq_$FOO(), switch the atomic helpers over to use those raw_* variants. This is necessary when using lockdep on pre-ARMv6 hardware, as lockdep uses atomic_t counters in the trace_hardirqs_off() path. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3805/1: S3C2412: LCD register updateBen Dooks
Add LCD register definitions for the S3C2412. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3804/1: S3C2442: LCD register updateBen Dooks
Add LCD register definitions for the S3C2442. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3796/1: S3C24XX: Add per-cpu DMA channel mapperBen Dooks
Allow each CPU type in the S3C24XX range to select the DMA channel mapping it supports. We change the DMA registration to use an virtual channel number that the DMA system will allocate to a hardware channel at request time. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3795/1: S3C24XX: add base AC97 registersBen Dooks
Add base definitions for the AC97 register definitions. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-24Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2006-09-22[PATCH] Cirrus Logic ep93xx ethernet driverLennert Buytenhek
The Cirrus Logic ep93xx is an ARM SoC that includes an ethernet MAC -- this patch adds a driver for that ethernet MAC. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-21[HEADERS] Fix ARM 'make headers_check'David Woodhouse
Sanitise the ARM headers exported to userspace. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-20[ARM] nommu: create flat.h to support uClinux flat binariesGreg Ungerer
Create header with uClinux flat format binary support macros for ARM platforms. Derived from the m68knommu flat.h. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-20[ARM] 3759/2: Remove uses of %?Daniel Jacobowitz
Patch from Daniel Jacobowitz The ARM kernel has several uses of asm("foo%?"). %? is a GCC internal modifier used to output conditional execution predicates. However, no version of GCC supports conditionalizing asm statements. GCC 4.2 will correctly expand %? to the empty string in user asms. Earlier versions may reuse the condition from the previous instruction. In 'if (foo) asm ("bar%?");' this is somewhat likely to be right... but not reliable. So, the only safe thing to do is to remove the uses of %?. I believe the tlbflush.h occurances were supposed to be removed before, based on the comment about %? not working at the top of that file. Old versions of GCC could omit branches around user asms if the asm didn't mark the condition codes as clobbered. This problem hasn't been seen on any recent (3.x or 4.x) GCC, but it could theoretically happen. So, where %? was removed a cc clobber was added. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-20[ARM] Add ARM irqtrace supportRussell King
This adds support for irqtrace for lockdep on ARM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-20[ARM] Cleanup arch/arm/mm a littleRussell King
Move top_pmd into arch/arm/mm/mm.h - nothing outside arch/arm/mm references it. Move the repeated definition of TOP_PTE into mm/mm.h, as well as a few function prototypes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-18[ARM] 3815/1: headers_install support for ARMRalph Siemsen
Move kernel-only #includes into #ifdef __KERNEL__, so that headers_install target can be used on ARM. Signed-off-by: Ralph Siemsen <ralphs@netwinder.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-14[ARM] 3785/1: S3C2412: Fix idle code as default uses wrong clocksBen Dooks
Patch from Ben Dooks Fix the idle code on the s3c2412 as the default code is using bits in the CLKCON register that are no-longer there. Provide an override for the idle code, and ensure that the power configuration is set to allow idle instead of stop or sleep. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-09[ARM] 3778/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 ↵Ben Dooks
[simtec] Patch from Ben Dooks Remove changelog entries from include/asm-arm/arch-s3c2410 for all simtec .h files as these are irrelevant with version control. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-03 07:10:44 +0000