aboutsummaryrefslogtreecommitdiff
path: root/include/asm-ia64/thread_info.h
AgeCommit message (Collapse)Author
2007-02-05[IA64] enable singlestep on system callbibo,mao
As is pointed out in http://www.gelato.org/community/view_linear.php?id=1_1036&from=authors&value=Ian%20Wienand#1_1039, if single step on break instruction, the break fault has higher priority than the single-step trap. When the break fault handler is entered, it advances the IP by 1 instruction so break instruction single-stepping is skipped, actually it is next instruction which is single stepped. This patch modifies this, it adds TIF_SINGLESTEP bit for thread flags, and generate a fake sigtrap when single stepping break instruction. Test case in attachment can verify this. Any comments is welcome. Signed-off-by: bibo, mao <bibo.mao@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-13[PATCH] PM: Fix SMP races in the freezerRafael J. Wysocki
Currently, to tell a task that it should go to the refrigerator, we set the PF_FREEZE flag for it and send a fake signal to it. Unfortunately there are two SMP-related problems with this approach. First, a task running on another CPU may be updating its flags while the freezer attempts to set PF_FREEZE for it and this may leave the task's flags in an inconsistent state. Second, there is a potential race between freeze_process() and refrigerator() in which freeze_process() running on one CPU is reading a task's PF_FREEZE flag while refrigerator() running on another CPU has just set PF_FROZEN for the same task and attempts to reset PF_FREEZE for it. If the refrigerator wins the race, freeze_process() will state that PF_FREEZE hasn't been set for the task and will set it unnecessarily, so the task will go to the refrigerator once again after it's been thawed. To solve first of these problems we need to stop using PF_FREEZE to tell tasks that they should go to the refrigerator. Instead, we can introduce a special TIF_*** flag and use it for this purpose, since it is allowed to change the other tasks' TIF_*** flags and there are special calls for it. To avoid the freeze_process()-refrigerator() race we can make freeze_process() to always check the task's PF_FROZEN flag after it's read its "freeze" flag. We should also make sure that refrigerator() will always reset the task's "freeze" flag after it's set PF_FROZEN for it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] sched: cleanup, remove task_t, convert to struct task_structIngo Molnar
cleanup: remove task_t and convert all the uses to struct task_struct. I introduced it for the scheduler anno and it was a mistake. Conversion was mostly scripted, the result was reviewed and all secondary whitespace and style impact (if any) was fixed up by hand. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] i386/x86-64/ia64: Move polling flag into thread_info_statusAndi Kleen
During some profiling I noticed that default_idle causes a lot of memory traffic. I think that is caused by the atomic operations to clear/set the polling flag in thread_info. There is actually no reason to make this atomic - only the idle thread does it to itself, other CPUs only read it. So I moved it into ti->status. Converted i386/x86-64/ia64 for now because that was the easiest way to fix ACPI which also manipulates these flags in its idle function. Cc: Nick Piggin <npiggin@novell.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-27[IA64] enable dumps to capture second page of kernel stackCliff Wickman
In SLES10 (2.6.16) crash dumping (in my experience, LKCD) is unable to capture the second page of the 2-page task/stack allocation. This is particularly troublesome for dump analysis, as the stack traceback cannot be done. (A similar convention is probably needed throughout the kernel to make kernel multi-page allocations detectable for dumping) Multi-page kernel allocations are represented by the single page structure associated with the first page of the allocation. The page structures associated with the other pages are unintialized. If the dumper is selecting only kernel pages it has no way to identify any but the first page of the allocation. The fix is to make the task/stack allocation a compound page. Signed-off-by: Cliff Wickman <cpw@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-21Pull sn2-mmio-writes into release branchTony Luck
Hand-fixed conflicts: include/asm-ia64/machvec_sn2.h Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-01-26[IA64] hooks to wait for mmio writes to drain when migrating processesBrent Casavant
On SN2, MMIO writes which are issued from separate processors are not guaranteed to arrive in any particular order at the IO hardware. When performing such writes from the kernel this is not a problem, as a kernel thread will not migrate to another CPU during execution, and mmiowb() calls can guarantee write ordering when control of the IO resource is allowed to move between threads. However, when MMIO writes can be performed from user space (e.g. DRM) there are no such guarantees and mechanisms, as the process may context-switch at any time, and may migrate to a different CPU as part of the switch. For such programs/hardware to operate correctly, it is required that the MMIO writes from the old CPU be accepted by the IO hardware before subsequent writes from the new CPU can be issued. The following patch implements this behavior on SN2 by waiting for a Shub register to indicate that these writes have been accepted. This is placed in the context switch-in path, and only performs the wait when the newly scheduled task changes CPUs. Signed-off-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: Brent Casavant <bcasavan@sgi.com>
2006-01-26[IA64] Delete MCA/INIT sigdelayed codeKeith Owens
The only user of the MCA/INIT sigdelayed code (SGI's I/O probing) has moved from the kernel into SAL. Delete the MCA/INIT sigdelayed code. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-01-13[IA64] Handle debug traps in fsys modeJason Uhlenkott
We need to handle debug traps in fsys mode non-fatally. They can happen now that we have fsyscalls which contain probe instructions. Signed-off-by: Jason Uhlenkott <jasonuhl@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-01-12[PATCH] ia64: task_thread_info()Al Viro
on ia64 thread_info is at the constant offset from task_struct and stack is embedded into the same beast. Set __HAVE_THREAD_FUNCTIONS, made task_thread_info() just add a constant. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13[IA64] fix circular dependency on generation of asm-offsets.hTony Luck
Fix? One ugly hack is replaced by a different ugly hack. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-11[IA64] MCA/INIT: add an extra thread_info flagKeith Owens
Add an extra thread_info flag to indicate the special MCA/INIT stacks. Mainly for debuggers. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-09kbuild: m68k,parisc,ppc,ppc64,s390,xtensa use generic asm-offsets.h supportSam Ravnborg
Delete obsoleted parts form arch makefiles and rename to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-06-23[PATCH] streamline preempt_count type across archsJesper Juhl
The preempt_count member of struct thread_info is currently either defined as int, unsigned int or __s32 depending on arch. This patch makes the type of preempt_count an int on all archs. Having preempt_count be an unsigned type prevents the catching of preempt_count < 0 bugs, and using int on some archs and __s32 on others is not exactely "neat" - much nicer when it's just int all over. A previous version of this patch was already ACK'ed by Robert Love, and the only change in this version of the patch compared to the one he ACK'ed is that this one also makes sure the preempt_count member is consistently commented. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!