aboutsummaryrefslogtreecommitdiff
path: root/include/asm-powerpc/mpic.h
AgeCommit message (Collapse)Author
2007-07-22[POWERPC] MPIC protected sourcesBenjamin Herrenschmidt
Some HW platforms, such as the new cell blades, requires some MPIC sources to be left alone by the operating system. This implements support for a "protected-sources" property in the mpic controller node containing a list of source numbers to be protected against operating system interference. For those interested in the gory details, the MPIC on the southbridge of those blades has some of the processor outputs routed to the cell, and at least one routed as a GPIO to the service processor. It will be used in the GA product for routing some of the southbridge error interrupts to the service processor which implements some of the RAS stuff, such as checkstopping when fatal errors occurs before they can propagate. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08[POWERPC] MPIC MSI allocatorMichael Ellerman
To support MSI on MPIC we need a way to reserve and allocate hardware irq numbers, this patch implements an allocator for that purpose. New firmware platforms must define a "msi-available-ranges" property on their MPIC node for MSI to work. For U3/U4 we do a best-guess setup. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] MPIC sys_device & suspend/resumeJohannes Berg
This adds mpic to the system devices and implements suspend and resume for them. This is necessary to get interrupts for modules back to where they were before a suspend to disk. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Rename MPIC_BROKEN_U3 to MPIC_U3_HT_IRQSMichael Ellerman
Rename MPIC_BROKEN_U3 to something a little more descriptive. Its effect is to enable support for HT irqs behind the PCI-X/HT bridge on U3/U4 (aka. CPC9x5) parts. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] MPIC: support more than 256 sourcesOlof Johansson
Allow more than the default 256 MPIC sources. Allocates a new flag (MPIC_LARGE_VECTORS) to be used by platform code when instantiating the mpic. I picked 11 bits worth right now since it would cover the number of sources on any hardware I have seen. It can always be increased later if needed. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Improve MPIC driver auto-configuration from DTBenjamin Herrenschmidt
This patch applies on top of the MPIC DCR support. It makes the MPIC driver capable of a lot more auto-configuration based on the device-tree, for example, it can retreive it's own physical address if not passed as an argument, find out if it's DCR or MMIO mapped, and set the BIG_ENDIAN flag automatically in the presence of a "big-endian" property in the device-tree node. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Support for DCR based MPICBenjamin Herrenschmidt
This patch implements support for DCR based MPIC implementations. Such implementations have the MPIC_USES_DCR flag set and don't use the phys_addr argument of mpic_alloc (they require a valid dcr mapping in the device node) This version of the patch can use a little bif of cleanup still (I can probably consolidate rb->dbase/doff, at least once I'm sure on how the hardware is actually supposed to work vs. possible simulator issues) and it should be possible to build a DCR-only version of the driver. I need to cleanup a bit the CONFIG_* handling for that and probably introduce CONFIG_MPIC_MMIO and CONFIG_MPIC_DCR. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-07[POWERPC] Fix up after irq changesOlaf Hering
Remove struct pt_regs * from all handlers. Also remove the regs argument from get_irq() functions. Compile tested with arch/powerpc/config/* and arch/ppc/configs/prep_defconfig Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30[POWERPC] Support for "weird" MPICs and fixup mpc7448_hpc2Zang Roy-r61911
This adds a new hardware information table for mpic. This enables the mpic code to deal with mpic controllers with different register layouts and hardware behaviours. This introduces CONFIG_MPIC_WEIRD. For boards with non standard mpic controllers, select CONFIG_MPIC_WEIRD and add its hardware information in the mpic_infos[] array. TSI108/109 PIC takes the first index of weird hardware information table. :) The table can be extended. The Tsi108/109 PIC looks like standard OpenPIC but, in fact, is different in register mapping and behavior. The patch does not affect the behavior of standard mpic. If CONFIG_MPIC_WEIRD is not defined, the code is essentially identical to the current code. [benh@kernel.crashing.org: This patch is a slightly cleaned up version of Zang Roy's support for the TSI108 MPIC variant. It also fixes up MPC7448_hpc2 to use the new version of the type macros and changes the way MPIC is selected in Kconfig to better match what is done for other system devices. ] Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03[POWERPC] Add new interrupt mapping core and change platforms to use itBenjamin Herrenschmidt
This adds the new irq remapper core and removes the old one. Because there are some fundamental conflicts with the old code, like the value of NO_IRQ which I'm now setting to 0 (as per discussions with Linus), etc..., this commit also changes the relevant platform and driver code over to use the new remapper (so as not to cause difficulties later in bisecting). This patch removes the old pre-parsing of the open firmware interrupt tree along with all the bogus assumptions it made to try to renumber interrupts according to the platform. This is all to be handled by the new code now. For the pSeries XICS interrupt controller, a single remapper host is created for the whole machine regardless of how many interrupt presentation and source controllers are found, and it's set to match any device node that isn't a 8259. That works fine on pSeries and avoids having to deal with some of the complexities of split source controllers vs. presentation controllers in the pSeries device trees. The powerpc i8259 PIC driver now always requests the legacy interrupt range. It also has the feature of being able to match any device node (including NULL) if passed no device node as an input. That will help porting over platforms with broken device-trees like Pegasos who don't have a proper interrupt tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03[POWERPC] Use the genirq frameworkBenjamin Herrenschmidt
This adapts the generic powerpc interrupt handling code, and all of the platforms except for the embedded 6xx machines, to use the new genirq framework. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] mpic: add support for serial mode interruptsMark A. Greer
On Tue, Jun 20, 2006 at 02:01:26PM +1000, Benjamin Herrenschmidt wrote: > On Mon, 2006-06-19 at 13:08 -0700, Mark A. Greer wrote: > > MPC10x-style interrupt controllers have a serial mode that allows > > several interrupts to be clocked in through one INT signal. > > > > This patch adds the software support for that mode. > > You hard code the clock ratio... why not add a separate call to be > called after mpic_init, > something like mpic_set_serial_int(int mpic, int enable, int > clock_ratio) ? How's this? -- MPC10x-style interrupt controllers have a serial mode that allows several interrupts to be clocked in through one INT signal. This patch adds the software support for that mode. Signed-off-by: Mark A. Greer <mgreer@mvista.com> -- arch/powerpc/sysdev/mpic.c | 20 ++++++++++++++++++++ include/asm-powerpc/mpic.h | 10 ++++++++++ 2 files changed, 30 insertions(+) -- Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: sanitize header files for user space includesArnd Bergmann
include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Experimental support for new G5 Macs (#2)Benjamin Herrenschmidt
This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Update MPIC workaroundsSegher Boessenkool
Cleanup the MPIC IO-APIC workarounds, make them a bit more generic, smaller and faster. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Move smp_mpic_message_pass into mpic.cPaul Mackerras
Having it here rather than in arch/ppc64/kernel/smp.c means that we can use it on 32-bit SMP systems easily with ARCH=powerpc. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-27powerpc: clean up after powermac build mergeStephen Rothwell
Complete moving arch/ppc64/kernel/mpic.h, include/asm-ppc/reg.h, include/asm-ppc64/kdebug.h and include/asm-ppc64/kprobes.h Add arch/powerpc/platforms/Makefile and use it from arch/powerpc/Makefile Introduce OLDARCH temporarily so we can point back to the originating architecture Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-26powerpc: Merge enough to start building in arch/powerpc.Paul Mackerras
This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>