aboutsummaryrefslogtreecommitdiff
path: root/include/asm-powerpc/spu.h
AgeCommit message (Collapse)Author
2006-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits) [POWERPC] re-enable OProfile for iSeries, using timer interrupt [POWERPC] support ibm,extended-*-frequency properties [POWERPC] Extra sanity check in EEH code [POWERPC] Dont look for class-code in pci children [POWERPC] Fix mdelay badness on shared processor partitions [POWERPC] disable floating point exceptions for init [POWERPC] Unify ppc syscall tables [POWERPC] mpic: add support for serial mode interrupts [POWERPC] pseries: Print PCI slot location code on failure [POWERPC] spufs: one more fix for 64k pages [POWERPC] spufs: fail spu_create with invalid flags [POWERPC] spufs: clear class2 interrupt status before wakeup [POWERPC] spufs: fix Makefile for "make clean" [POWERPC] spufs: remove stop_code from struct spu [POWERPC] spufs: fix spu irq affinity setting [POWERPC] spufs: further abstract priv1 register access [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts [POWERPC] spufs: dont try to access SPE channel 1 count [POWERPC] spufs: use kzalloc in create_spu [POWERPC] spufs: fix initial state of wbox file ... Manually resolved conflicts in: drivers/net/phy/Makefile include/asm-powerpc/spu.h
2006-06-21[POWERPC] spufs: remove stop_code from struct spuMasato Noguchi
This patch remove 'stop_code' -- discarded member of struct spu. It is written at initialize and interrupt, but never read in current implementation. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] spufs: further abstract priv1 register accessGeoff Levand
To support muti-platform binaries the spu hypervisor accessor routines must have runtime binding. I removed the existing statically linked routines in spu.h and spu_priv1_mmio.c and created new accessor routines in spu_priv1.h that operate indirectly through an ops struct spu_priv1_ops. spu_priv1_mmio.c contains the instance of the accessor routines for running on raw hardware. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21[POWERPC] cell: register SPUs as sysdevsJeremy Kerr
SPUs are registered as system devices, exposing attributes through sysfs. Since the sysdev includes a kref, we can remove the one in struct spu (it isn't used at the moment anyway). Currently only the interrupt source and numa node attributes are added. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-01[PATCH] powerpc: cell: Add numa id to struct spuJeremy Kerr
Add an nid member to the spu structure, and store the numa id of the spu there on creation. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-26Don't include linux/config.h from anywhere else in include/David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-03-27[PATCH] spufs: enable SPE problem state MMIO access.Mark Nutter
This patch is layered on top of CONFIG_SPARSEMEM and is patterned after direct mapping of LS. This patch allows mmap() of the following regions: "mfc", which represents the area from [0x3000 - 0x3fff]; "cntl", which represents the area from [0x4000 - 0x4fff]; "signal1" which begins at offset 0x14000; "signal2" which begins at offset 0x1c000. The signal1 & signal2 files may be mmap()'d by regular user processes. The cntl and mfc file, on the other hand, may only be accessed if the owning process has CAP_SYS_RAWIO, because they have the potential to confuse the kernel with regard to parallel access to the same files with regular file operations: the kernel always holds a spinlock when accessing registers in these areas to serialize them, which can not be guaranteed with user mmaps, Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27[PATCH] spufs: implement mfc access for PPE-side DMAArnd Bergmann
This patch adds a new file called 'mfc' to each spufs directory. The file accepts DMA commands that are a subset of what would be legal DMA commands for problem state register access. Upon reading the file, a bitmask is returned with the completed tag groups set. The file is meant to be used from an abstraction in libspe that is added by a different patch. From the kernel perspective, this means a process can now offload a memory copy from or into an SPE local store without having to run code on the SPE itself. The transfer will only be performed while the SPE is owned by one thread that is waiting in the spu_run system call and the data will be transferred into that thread's address space, independent of which thread started the transfer. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27[PATCH] spufs: allow SPU code to do syscallsArnd Bergmann
An SPU does not have a way to implement system calls itself, but it can create intercepts to the kernel. This patch uses the method defined by the JSRE interface for C99 host library calls from an SPU to implement Linux system calls. It uses the reserved SPU stop code 0x2104 for this, using the structure layout and syscall numbers for ppc64-linux. I'm still undecided wether it is better to have a list of allowed syscalls or a list of forbidden syscalls, since we can't allow an SPU to call all syscalls that are defined for ppc64-linux. This patch implements the easier choice of them, with a blacklist that only prevents an SPU from calling anything that interacts with its own execution, e.g fork, execve, clone, vfork, exit, spu_run and spu_create and everything that deals with signals. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: set irq affinity for running threadsArnd Bergmann
For far, all SPU triggered interrupts always end up on the first SMT thread, which is a bad solution. This patch implements setting the affinity to the CPU that was running last when entering execution on an SPU. This should result in a significant reduction in IPI calls and better cache locality for SPE thread specific data. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: fix allocation on 64k pagesArnd Bergmann
The size of the local store is architecture defined and independent from the page size, so it should not be defined in terms of pages in the first place. This mistake broke a few places when building for 64kb pages. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: abstract priv1 register access.Arnd Bergmann
In a hypervisor based setup, direct access to the first priviledged register space can typically not be allowed to the kernel and has to be implemented through hypervisor calls. As suggested by Masato Noguchi, let's abstract the register access trough a number of function calls. Since there is currently no public specification of actual hypervisor calls to implement this, I only provide a place that makes it easier to hook into. Cc: Masato Noguchi <Masato.Noguchi@jp.sony.com> Cc: Geoff Levand <geoff.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: clean up use of bitopsArnd Bergmann
checking bits manually might not be synchonized with the use of set_bit/clear_bit. Make sure we always use the correct bitops by removing the unnecessary identifiers. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: sanitize header files for user space includesArnd Bergmann
include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: Improved SPU preemptability [part 2].Arnd Bergmann
This patch reduces lock complexity of SPU scheduler, particularly for involuntary preemptive switches. As a result the new code does a better job of mapping the highest priority tasks to SPUs. Lock complexity is reduced by using the system default workqueue to perform involuntary saves. In this way we avoid nasty lock ordering problems that the previous code had. A "minimum timeslice" for SPU contexts is also introduced. The intent here is to avoid thrashing. While the new scheduler does a better job at prioritization it still does nothing for fairness. From: Mark Nutter <mnutter@us.ibm.com> Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: Improved SPU preemptability.Arnd Bergmann
This patch makes it easier to preempt an SPU context by having the scheduler hold ctx->state_sema for much shorter periods of time. As part of this restructuring, the control logic for the "run" operation is moved from arch/ppc64/kernel/spu_base.c to fs/spufs/file.c. Of course the base retains "bottom half" handlers for class{0,1} irqs. The new run loop will re-acquire an SPU if preempted. From: Mark Nutter <mnutter@us.ibm.com> Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: cooperative scheduler supportArnd Bergmann
This adds a scheduler for SPUs to make it possible to use more logical SPUs than physical ones are present in the system. Currently, there is no support for preempting a running SPU thread, they have to leave the SPU by either triggering an event on the SPU that causes it to return to the owning thread or by sending a signal to it. This patch also adds operations that enable accessing an SPU in either runnable or saved state. We use an RW semaphore to protect the state of the SPU from changing underneath us, while we are holding it readable. In order to change the state, it is acquired writeable and a context save or restore is executed before downgrading the semaphore to read-only. From: Mark Nutter <mnutter@us.ibm.com>, Uli Weigand <Ulrich.Weigand@de.ibm.com> Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: switchable spu contextsMark Nutter
Add some infrastructure for saving and restoring the context of an SPE. This patch creates a new structure that can hold the whole state of a physical SPE in memory. It also contains code that avoids races during the context switch and the binary code that is loaded to the SPU in order to access its registers. The actual PPE- and SPE-side context switch code are two separate patches. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: The SPU file system, baseArnd Bergmann
This is the current version of the spu file system, used for driving SPEs on the Cell Broadband Engine. This release is almost identical to the version for the 2.6.14 kernel posted earlier, which is available as part of the Cell BE Linux distribution from http://www.bsc.es/projects/deepcomputing/linuxoncell/. The first patch provides all the interfaces for running spu application, but does not have any support for debugging SPU tasks or for scheduling. Both these functionalities are added in the subsequent patches. See Documentation/filesystems/spufs.txt on how to use spufs. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>