aboutsummaryrefslogtreecommitdiff
path: root/include/asm-ppc
AgeCommit message (Collapse)Author
2005-11-07[PATCH] RapidIO support: ppc32Matt Porter
Adds PPC32 RIO support. Init code for the MPC85xx RIO ports and glue for the STx GP3 board to use it. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] fix remaining missing includesTim Schmielau
Fix more include file problems that surfaced since I submitted the previous fix-missing-includes.patch. This should now allow not to include sched.h from module.h, which is done by a followup patch. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-BootMatt Porter
Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot as bootloader. The OpenBIOS bd_info struct is not used in the kernel anymore (only U-Boot now). uImage (U-Boot) tested on walnut, sycamore and bubinga zImage (OpenBIOS) tested on sycamore, bubinga and ebony Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Add Yucca (440SPe eval board) platformRoland Dreier
Add support for AMCC PowerPC 440SPe "Yucca" eval board platform. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Add 440SPe supportRoland Dreier
Add support for the AMCC PowerPC 440SPe SoC, including PCI Express in root port mode. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Dump error status for both PLB segments on 440SPRoland Dreier
The PowerPC 440SP SoC has two Processor Local Bus (PLB) segments (a high-throughput segment and a low-latency segment). Fix our PLB register definitions to cope with this, and add code to dump the status of both segments when a machine check occurs. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Allow ERPN for early serial to depend on CPU typeRoland Dreier
The PowerPC 440SPe supports up to 16 GB of RAM, and therefore its IO registers are at 0x4_xxxx_xxxx instead of being at 0x1_xxxx_xxxx like most other PPC 440 chips. To allow for this, this patch moves the definition of the ERPN used for mapping UART0 from being hard-coded in the head_44x.S assembly code to being defined in ibm44x.h. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2005-11-04Merge git://oak/home/sfr/kernels/iseries/workPaul Mackerras
2005-11-04powerpc: merge tlbflush.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-04Merge with PaulusMichael Ellerman
2005-11-04powerpc: merge tlb.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03Merge git://oak/home/sfr/kernels/iseries/workPaul Mackerras
2005-11-03powerpc: merge ucontext.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03[PATCH] ppc32 8xx: Fix harmless warning in 8xx_io/commproc.cMarcelo Tosatti
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-03powerpc: merge sigcontext.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03powerpc: merge ptrace.hStephen Rothwell
Move struct ptregs32 into asm-ppc64/ppc32.h Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03powerpc: merge stat.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03powerpc: Merge asm-ppc/kexec.h and asm-ppc64/kexec.hMichael Ellerman
Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h. The only thing that's really changed is that we now allocate crash_notes properly on PPC32. It's address is exported via sysfs, so it's not correct for it to be a pointer. I've also removed some of the "we don't use this" comments, because they're wrong (or perhaps were referring only to arch code). Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-01[PATCH] missing platform_device.h includesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-02Merge ../linux-2.6Paul Mackerras
2005-11-02[PATCH] powerpc: Merge futex.hDavid Gibson
This patch merges the ppc32 and ppc64 versions of futex.h, essentially by taking the ppc64 version as the powerpc version. The old ppc32 version did not implement the futex_atomic_op_inuser() callback (it always returned -ENOSYS), so FUTEX_WAKE_OP would not work on ppc32. In fact the ppc64 version of this function is almost suitable for ppc32 as well - the only change needed is to extend ppc_asm.h with a macro expanding to to the right pseudo-op to store a pointer (either ".long" or ".llong"). Built and booted on pSeries. Built for 32-bit powermac. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: Merge bitops.hDavid Gibson
Here's a revised version. This re-introduces the set_bits() function from ppc64, which I removed because I thought it was unused (it exists on no other arch). In fact it is used in the powermac interrupt code (but not on pSeries). - We use LARXL/STCXL macros to generate the right (32 or 64 bit) instructions, similar to LDL/STL from ppc_asm.h, used in fpu.S - ppc32 previously used a full "sync" barrier at the end of test_and_*_bit(), whereas ppc64 used an "isync". The merged version uses "isync", since I believe that's sufficient. - The ppc64 versions of then minix_*() bitmap functions have changed semantics. Previously on ppc64, these functions were big-endian (that is bit 0 was the LSB in the first 64-bit, big-endian word). On ppc32 (and x86, for that matter, they were little-endian. As far as I can tell, the big-endian usage was simply wrong - I guess no-one ever tried to use minixfs on ppc64. - On ppc32 find_next_bit() and find_next_zero_bit() are no longer inline (they were already out-of-line on ppc64). - For ppc64, sched_find_first_bit() has moved from mmu_context.h to the merged bitops. What it was doing in mmu_context.h in the first place, I have no idea. - The fls() function is now implemented using the cntlzw instruction on ppc64, instead of generic_fls(), as it already was on ppc32. - For ARCH=ppc, this patch requires adding arch/powerpc/lib to the arch/ppc/Makefile. This in turn requires some changes to arch/powerpc/lib/Makefile which didn't correctly handle ARCH=ppc. Built and running on G5. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: Merge ipcbuf.hDavid Gibson
This patch merges ppc32 and ppc64 versions of ipcbuf.h. The merge is essentially trivial, since the structure defined in each version was already identical. Only wrinkle is that the merged version now includes linux/types.h in order to get the fixed width integer types. In fact, the old versions probably should have been including that anyway, since the file uses various __kernel_*_t types. Built and booted on G5, built for 32-bit pmac, but not booted, since the merge tree currently doesn't boot there. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01powerpc: merge uaccess.hStephen Rothwell
There is still a bug to be fixed and more merging to be done. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-31Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31Merge ../linux-2.6 by handPaul Mackerras
2005-10-30[PATCH] semaphore: Remove __MUTEX_INITIALIZER()Arthur Othieno
__MUTEX_INITIALIZER() has no users, and equates to the more commonly used DECLARE_MUTEX(), thus making it pretty much redundant. Remove it for good. Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] unify sys_ptrace prototypeChristoph Hellwig
Make sure we always return, as all syscalls should. Also move the common prototype to <linux/syscalls.h> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29[PATCH] add sem_is_read/write_locked()Rik Van Riel
Add sem_is_read/write_locked functions to the read/write semaphores, along the same lines of the *_is_locked spinlock functions. The swap token tuning patch uses sem_is_read_locked; sem_is_write_locked is added for completeness. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29Create platform_device.h to contain all the platform device details.Russell King
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29[PATCH] ppc32: ppc_sys fixes for 8xx and 82xxVitaly Bordug
This patch fixes a numbers of issues regarding to that both 8xx and 82xx began to use ppc_sys model: - Platform is now identified by default deviceless SOC, if no BOARD_CHIP_NAME is specified in the bard-specific header. For the list of supported names refer to (arch/ppc/syslib/) mpc8xx_sys.c and mpc82xx_sys.c for 8xx and 82xx respectively. - Fixed a bug in identification by name - if the name was not found, it returned -1 instead of default deviceless ppc_spec. - fixed devices amount in the 8xx platform system descriptions Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29[PATCH] ppc32: 85xx PHY Platform UpdateAndy Fleming
This patch updates the 85xx platform code to support the new PHY Layer. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <Kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29[PATCH] ppc32: nvram driver for chrpOlaf Hering
This implements a nvram acccess method, similar to arch/ppc64/kernel/pSeries_nvram.c tested on CHRP B50. Signed-off-by: Olaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29[PATCH] ppc: make phys_mem_access_prot() work with pfns instead of addressesRoland Dreier
Change the phys_mem_access_prot() function to take a pfn instead of an address. This allows mmap64() to work on /dev/mem for addresses above 4G on 32-bit architectures. We start with a pfn in mmap_mem(), so there's no need to convert to an address; in fact, it's actively bad, since the conversion can overflow when the address is above 4G. Similarly fix the ppc32 page_is_ram() function to avoid a conversion to an address by directly comparing to max_pfn. Working with max_pfn instead of high_memory fixes page_is_ram() to give the right answer for highmem pages. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28[PATCH] gfp_t: dma-mapping (ppc)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-27powerpc: 32-bit CHRP SMP fixesPaul Mackerras
Untested, but "should" work... at least this way it compiles. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] powerpc: Merge parport.hDavid Gibson
Save for the header #define, ppc32 and ppc64 versions of parport.h are identical. This patch merges them. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] powerpc: Fix handling of fpscr on 64-bitDavid Gibson
The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] powerpc: merge scatterlist.hStephen Rothwell
This depends on the 64bit dma_addr_t patch. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: merge include/asm-ppc*/checksum.h into ↵Kumar Gala
include/asm-powerpc/checksum.h Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-21[PATCH] powerpc: Merge thread_info.hDavid Gibson
Merge ppc32 and ppc64 versions of thread_info.h. They were pretty similar already, the chief changes are: - Instead of inline asm to implement current_thread_info(), which needs to be different for ppc32 and ppc64, we use C with an asm("r1") register variable. gcc turns it into the same asm as we used to have for both platforms. - We replace ppc32's 'local_flags' with the ppc64 'syscall_noerror' field. The noerror flag was in fact the only thing in the local_flags field anyway, so the ppc64 approach is simpler, and means we only need a load-immediate/store instead of load/mask/store when clearing the flag. - In readiness for 64k pages, when THREAD_SIZE will be less than a page, ppc64 used kmalloc() rather than get_free_pages() to allocate the kernel stack. With this patch we do the same for ppc32, since there's no strong reason not to. - For ppc64, we no longer export THREAD_SHIFT and THREAD_SIZE via asm-offsets, thread_info.h can now be safely included in asm, as on ppc32. Built and booted on G4 Powerbook (ARCH=ppc and ARCH=powerpc) and Power5 (ARCH=ppc64 and ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc/ppc/ppc64: Various compile fixes.Paul Mackerras
This declares powersave_nap in system.h and makes it an int everywhere, fixes typos for the maple platform, fixes a couple of places where I missed removing the last two arguments from a message_pass function, and makes ppc64 consistent with ppc32 in the type of the pci_bridge.cfg_data field. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20ppc: rename pci_assign_all_busses to pci_assign_all_busesPaul Mackerras
... for consistency with ppc64 and to make merging easier. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Merge various powermac-related header files.Paul Mackerras
Except for smu.h, which moved from asm-ppc64 to asm-powerpc, all of these moved from asm-ppc to asm-powerpc. In each case the asm-ppc64 version (if there was one) was just a single line including the asm-ppc version. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20[PATCH] powerpc: Merge types.hBecky Bruce
This patch merges types.h into include/asm-powerpc. The only real change is the removal of the include of linux/config.h from the 32-bit version - it doesn't appear to be necessary. This patch has been built on several different 32 and 64-bit platforms, and booted on mpc8540_ads. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20[PATCH] powerpc: Merge ppc64 pmc.[ch] with ppc32 perfmon.[ch]David Gibson
This patches the ppc32 and ppc64 versions of the headers and .c files with helper functions for manipulating the performance counting hardware. As a side effect, it removes use of the term "perfmon" from ppc32, thus avoiding confusion with the unrelated performance counter interface from HP Labs also called "perfmon". Built, but not booted, for g5, pSeries, iSeries, and 32-bit Powermac with both ARCH=powerpc and ARCH=ppc{,64} as appropriate. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19ppc: declare smp_ops in asm/smp.h, since platform setup code needs itPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17ppc: Fix various compile errors resulting from ptrace.c mergePaul Mackerras
This introduces flush_{fp,altivec,spe}_to_thread and fixes a branch-too-far error in linking. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTESStephen Rothwell
instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>