aboutsummaryrefslogtreecommitdiff
path: root/include/asm-sh
AgeCommit message (Collapse)Author
2008-04-02kvm: provide kvm.h for all architecture: fixes headers_installChristian Borntraeger
Currently include/linux/kvm.h is not considered by make headers_install, because Kbuild cannot handle " unifdef-$(CONFIG_FOO) += foo.h. This problem was introduced by commit fb56dbb31c4738a3918db81fd24da732ce3b4ae6 Author: Avi Kivity <avi@qumranet.com> Date: Sun Dec 2 10:50:06 2007 +0200 KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h> includes, not existing. Rather than add a zillion <asm/kvm.h>s, export kvm. only if the arch actually supports it. Signed-off-by: Avi Kivity <avi@qumranet.com> which makes this an 2.6.25 regression. One way of solving the issue is to enhance Kbuild, but Avi and David conviced me, that changing headers_install is not the way to go. This patch changes the definition for linux/kvm.h to unifdef-y. If  unifdef-y is used for linux/kvm.h "make headers_check" will fail on all architectures without asm/kvm.h. Therefore, this patch also provides asm/kvm.h on all architectures. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Avi Kivity <avi@qumranet.com> Cc: Sam Ravnborg <sam@ravnborg.org Cc: David Woodhouse <dwmw2@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-31remove include/asm-sh/floppy.hAdrian Bunk
This patch removes the unused include/asm-sh/floppy.h (ARCH_MAY_HAVE_PC_FDC was not enabled). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-26sh: Fix TIF_USEDFPU clearing under FPU emulation.Paul Mundt
The unlazy_fpu() path calls in to save_fpu() if the task has TIF_USEDFPU set. save_fpu() being the crap API that it is has the side effect of clearing the flag itself, which presently doesn't happen if we're using FPU emulation. Fix this up for now, pending an overhaul in 2.6.26. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-26sh: Fix occasional FPU register corruption under preempt.Paul Mundt
Presently with preempt enabled there's the possibility to be preempted after the TIF_USEDFPU test and the register save, leading to bogus state post-__switch_to(). Use an explicit preempt_disable()/enable() pair around unlazy_fpu()/clear_fpu() to avoid this. Follows the x86 change. Reported-by: Takuo Koguchi <takuo.koguchi.sw@hitachi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-14sh: Fix more user header breakage from sh64 integration.Paul Mundt
posix_types.h and byteorder.h were sticking purely with the Kconfig symbols, which doesn't work when we scrub the headers for user use. Fixes a very unhelpful build error in current klibc. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-06sh: Fix up the sh64 build.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26serial: Move asm-sh/sci.h to linux/serial_sci.h.Paul Mundt
This header is needed on other architectures as well (namely h8300), which currently fails to build without this in place. Rather than duplicating the port definition completely there, just move this to a common location instead. This should get h8300 working again for 2.6.25, in addition to the changes already pushed by Sato-san in -rc2. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26sh: Fix up HAS_SR_RB typo in entry-macros.Hideo Saito
Signed-off-by: Hideo Saito <saito@densan.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-25sh: Rename SH-3 CCR3 reg to avoid synclink_cs clash.Paul Mundt
drivers/char/pcmcia/synclink_cs.c:284:1: warning: "CCR3" redefined In file included from include/asm/cache.h:13, from include/asm/processor_32.h:15, from include/asm/processor.h:60, from include/linux/prefetch.h:14, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/char/pcmcia/synclink_cs.c:38: include/asm/cpu/cache.h:38:1: warning: this is the location of the previous definition Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: fix ioreadN_rep and iowriteN_repMagnus Damm
This patch is a fix to make sure readsN/writesN are used over insN/outsN for ioreadN_rep/iowriteN_rep. The current state of the sh io code is that mmio operations like readN/writeN and ioreadN/iowriteN are unaffected by the value of generic_io_base. This is different fom port based io like inN/outN which gets adjusted using the value in generic_io_base. Without this patch ioreadN_rep/iowriteN_rep get their addresses adjusted. The address for mmio access is adjusted using generic_io_base. This is wrong. The ata core code currently crashes if generic_io_base is set. This patch changes ioreadN_rep/iowriteN_rep to follow the same rules as the rest of the mmio operations, ie don't adjust using generic_io_base. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Katsuya MATSUBARA <matsu@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: Kill off more dead symbols.Paul Mundt
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: asm/irq.h needs asm/cpu/irq.h.Paul Mundt
The SH-5 build currently fails when trying to build the i8042 code due to the missing IRQ definitions. These are provided in asm/cpu/irq.h, so just include that there to get it building again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: Get SH-5 caches working again post-unification.Paul Mundt
A number of cleanups to get the SH-5 cache management code in line with the rest of the SH backend. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: asm/tlb.h needs linux/pagemap.h for CONFIG_SWAP=n.Paul Mundt
linux/swap.h really wants to include linux/pagemap.h in order to satisfy the page_cache_release()/release_pages() definition requirements when CONFIG_SWAP=n. Unfortunately the code in question contains: /* only sparc can not include linux/pagemap.h in this file * so leave page_cache_release and release_pages undeclared... */ #define free_page_and_swap_cache(page) \ page_cache_release(page) #define free_pages_and_swap_cache(pages, nr) \ release_pages((pages), (nr), 0); so it looks like we're stuck with doing it in asm/tlb.h instead, as others already do (ARM, CRIS, etc.). Grumble. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: Tidy include/asm-sh/hp6xx.hKristoffer Ericson
This patch removes defunct. led support functions from hp6xx.h since they are now added in a proper driver (see commit below). Also adds tabs instead of spaces before comments. *commit d39a7a63eb3971b1b3cc5c181ed526bf437b1c72 Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: Update SH-5 flush_cache_sigtramp() for API changes.Paul Mundt
Previously this took an explicit range, update this to use the same behaviour as the rest of the SH parts where we simply flush out a line from the start address. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: Fix up set_fixmap_nocache() for SH-5.Paul Mundt
This needs a PAGE_KERNEL_NOCACHE definition, as provided by pgtable_32.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: Fix up pte_mkhuge() build breakage for SH-5.Paul Mundt
Applies the fix from 5b67954e804465a4658dd4da8d52b87a8d1ea00c to pgtable_64.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: Handle SH7366 CPU in check_bugs().Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: add support for sh7366 processorMagnus Damm
This patch adds sh7366 cpu supports. Just the most basic things like interrupt controller, clocks and serial port are included at this point. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: trapped io support for highlander V2Magnus Damm
This patch converts the highlander CF device from good old machvec readb/writeb to the new shiny trapped io. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: trapped io support for r2d V2Magnus Damm
This patch converts the CF device on r2d boards from machvec readb/writeb to trapped io. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: trapped io support V2Magnus Damm
The idea is that we want to get rid of the in/out/readb/writeb callbacks from the machvec and replace that with simple inline read and write operations to memory. Fast and simple for most hardware devices (think pci). Some devices require special treatment though - like 16-bit only CF devices - so we need to have some method to hook in callbacks. This patch makes it possible to add a per-device trap generating filter. This way we can get maximum performance of sane hardware - which doesn't need this filter - and crappy hardware works but gets punished by a performance hit. V2 changes things around a bit and replaces io access callbacks with a simple minimum_bus_width value. In the future we can add stride as well. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: make copy_to/from_user() static inlineMagnus Damm
This patch changes copy_from_user() and copy_to_user() from macros into static inline functions. This way we can use them as function pointers. Also unify the 64 bit and 32 bit versions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: Wire up new timerfd syscalls.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: termios ioctl definitionsAlan Cox
These ports are holding up progress and now have been for months. Do the job for them. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-08CONFIG_HIGHPTE vs. sub-page page tables.Martin Schwidefsky
Background: I've implemented 1K/2K page tables for s390. These sub-page page tables are required to properly support the s390 virtualization instruction with KVM. The SIE instruction requires that the page tables have 256 page table entries (pte) followed by 256 page status table entries (pgste). The pgstes are only required if the process is using the SIE instruction. The pgstes are updated by the hardware and by the hypervisor for a number of reasons, one of them is dirty and reference bit tracking. To avoid wasting memory the standard pte table allocation should return 1K/2K (31/64 bit) and 2K/4K if the process is using SIE. Problem: Page size on s390 is 4K, page table size is 1K or 2K. That means the s390 version for pte_alloc_one cannot return a pointer to a struct page. Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one cannot return a pointer to a pte either, since that would require more than 32 bit for the return value of pte_alloc_one (and the pte * would not be accessible since its not kmapped). Solution: The only solution I found to this dilemma is a new typedef: a pgtable_t. For s390 pgtable_t will be a (pte *) - to be introduced with a later patch. For everybody else it will be a (struct page *). The additional problem with the initialization of the ptl lock and the NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and a destructor pgtable_page_dtor. The page table allocation and free functions need to call these two whenever a page table page is allocated or freed. pmd_populate will get a pgtable_t instead of a struct page pointer. To get the pgtable_t back from a pmd entry that has been installed with pmd_populate a new function pmd_pgtable is added. It replaces the pmd_page call in free_pte_range and apply_to_pte_range. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08aout: move STACK_TOP[_MAX] to asm/processor.hDavid Howells
Move STACK_TOP[_MAX] out of asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT format is available. Signed-off-by: David Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Sanitize the type of struct user.u_ar0H. Peter Anvin
struct user.u_ar0 is defined to contain a pointer offset on all architectures in which it is defined (all architectures which define an a.out format except SPARC.) However, it has a pointer type in the headers, which is pointless -- <asm/user.h> is not exported to userspace, and it just makes the code messy. Redefine the field as "unsigned long" (which is the same size as a pointer on all Linux architectures) and change the setting code to user offsetof() instead of hand-coded arithmetic. Cc: Linux Arch Mailing List <linux-arch@vger.kernel.org> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Håvard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Cleanup asm/{elf,page,user}.h: #ifdef __KERNEL__ is no longer neededKirill A. Shutemov
asm/elf.h, asm/page.h and asm/user.h don't export to userspace now, so we can drop #ifdef __KERNEL__ for them. [k.shutemov@gmail.com: remove #ifdef __KERNEL_] Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com> Reviewed-by: David Woodhouse <dwmw2@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Fix __const_udelay declaration and definition mismatchesJeff Dike
The declaration and implementation of __const_udelay use different names for the parameter on a number of architectures: include/asm-avr32/delay.h:15:extern void __const_udelay(unsigned long usecs); arch/avr32/lib/delay.c:39:inline void __const_udelay(unsigned long xloops) include/asm-sh/delay.h:15:extern void __const_udelay(unsigned long usecs); arch/sh/lib/delay.c:22:inline void __const_udelay(unsigned long xloops) include/asm-m32r/delay.h:15:extern void __const_udelay(unsigned long usecs); arch/m32r/lib/delay.c:58:void __const_udelay(unsigned long xloops) include/asm-x86/delay.h:16:extern void __const_udelay(unsigned long usecs); arch/x86/lib/delay_32.c:82:inline void __const_udelay(unsigned long xloops) arch/x86/lib/delay_64.c:46:inline void __const_udelay(unsigned long xloops) The units of the parameter isn't usecs, so that name is definitely wrong. It's also not exactly loops, so I suppose xloops is an OK name. This patch changes these names from usecs to xloops. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05timerfd: fix remaining architecturesAndrew Morton
Cc: David Howells <dhowells@redhat.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05add mm argument to pte/pmd/pud/pgd_freeBenjamin Herrenschmidt
(with Martin Schwidefsky <schwidefsky@de.ibm.com>) The pgd/pud/pmd/pte page table allocation functions get a mm_struct pointer as first argument. The free functions do not get the mm_struct argument. This is 1) asymmetrical and 2) to do mm related page table allocations the mm argument is needed on the free function as well. [kamalesh@linux.vnet.ibm.com: i386 fix] [akpm@linux-foundation.org: coding-syle fixes] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-31[NET]: Introducing socket mark socket option.Laszlo Attila Toth
A userspace program may wish to set the mark for each packets its send without using the netfilter MARK target. Changing the mark can be used for mark based routing without netfilter or for packet filtering. It requires CAP_NET_ADMIN capability. Signed-off-by: Laszlo Attila Toth <panther@balabit.hu> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28remove __attribute_used__Adrian Bunk
Remove the deprecated __attribute_used__. [Introduce __section in a few places to silence checkpatch /sam] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28sh: add spi header and r2d platform data V3Magnus Damm
This patch adds the header file asm/spi.h and board specific code for the r2d board. The header file contains a structure that should be used to point out a single spi bus. The board specific code for r2d is updated with such a structure for the new spi_sh_sci driver. The structure contains a chip select callback plus information about the R9701 rtc chip which is attached to the spi bus. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: update r7780rp interrupt codeMagnus Damm
This patch updates the board specific irq code for r7780rp. The new code is very similar to the other highlander implementations, with the exception that the r7780rp handles pci interrupts using IRL. To simplify the pci code and use the same interrupt numbers as r7780mp and r7785rp we hook in to the cpu specific pci vectors. The pci interrupts and the push switch all work well with and without this patch. CF and AX88796 are not ok though and the source of the problem is unknown at this point. The AX88796 does for not detect it's proper mac address (IPL gets it right) and the kernel hangs on CF access. As a workaround this patch removes the CF and the AX88796 from the platform datain case of r7780rp. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: remove consistent alloc stuff from the machine vectorMagnus Damm
Now with the voyagergx cruft gone and the dreamcast using declared coherent memory for pci there are no users of the consistent alloc and free functions pointers in the machine vector. So this little patch simply removes these function pointers from the macvec. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: declared coherent memory support V2Magnus Damm
This patch adds declared coherent memory support to the sh architecture. All functions are based on the x86 implementation. Header files are adjusted to use the new functions instead of the former consistent_alloc() code. This version includes the few changes what were included in the fix patch together with modifications based on feedback from Paul. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add support for SDK7780 board.Nicholas Beck
Add support for Renesas Technology Europe SDK7780 board. Signed-off-by: Nicholas Beck <nbeck@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Kill off dead HS771RVoIP board support.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: r7785rp: Hook up the rest of the HL7785 FPGA IRQ vectors.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: remove voyagergxMagnus Damm
This patch removes redundant irq handling code together with unused consistent alloc code. R2D uart setup code is changed to use sm501-regs.h and unused header files are removed. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: intc - remove default interrupt priority tablesMagnus Damm
This patch removes interrupt priority tables from the intc code. Optimal priority assignment varies with embedded application anyway, so keeping the interrupt priority tables together with cpu-specific code doesn't make sense. The function intc_set_priority() should be used instead to set the desired interrupt priority level. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix posix_types.h userspace breakage from sh64 merge.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: sh7712 clock supportAndrew Murray
This patch provides specific clock support for the SH7712. Signed-off-by: Andrew Murray <amurray@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add support for SH7763 CPU subtype.Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix get_user()/put_user() build error.Paul Mundt
Fixes the build error caused by -Werror on gcc 3.x compilers: arch/sh/kernel/signal_32.c: In function `sys_sigaction': arch/sh/kernel/signal_32.c:66: warning: initialization discards qualifiers from pointer target type arch/sh/kernel/signal_32.c:67: warning: initialization discards qualifiers from pointer target type arch/sh/kernel/signal_32.c:69: warning: initialization discards qualifiers from pointer target type arch/sh/kernel/signal_32.c:70: warning: initialization discards qualifiers from pointer target type The mismatch in question was introduced by commit-id 9c5a4eec79b3eb8876d2e7fddfa1e040a7650e55. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add support for SH7721 CPU subtype.Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Always use CONFIG_HZ for HZ.Paul Mundt
Currently the wdt forces HZ=1000 and sidesteps CONFIG_HZ completely. This is a remnant from when HZ was hardcoded and before CONFIG_HZ was introduced. Additionally, not all of the timers have this requirement these days, so it's also an artificial limitation. Just kill it off and use CONFIG_HZ directly. Reported-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>