aboutsummaryrefslogtreecommitdiff
path: root/include/asm-sparc64
AgeCommit message (Collapse)Author
2006-07-31[PATCH] IA64: kprobe invalidate icache of jump bufferbibo, mao
Kprobe inserts breakpoint instruction in probepoint and then jumps to instruction slot when breakpoint is hit, the instruction slot icache must be consistent with dcache. Here is the patch which invalidates instruction slot icache area. Without this patch, in some machines there will be fault when executing instruction slot where icache content is inconsistent with dcache. Signed-off-by: bibo,mao <bibo.mao@intel.com> Acked-by: "Luck, Tony" <tony.luck@intel.com> Acked-by: Keshavamurthy Anil S <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-27[SPARC64]: Fix typo in pgprot_noncached().David S. Miller
The sun4v code sequence was or'ing in the sun4u pte bits by mistake. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-27[SPARC64]: Fix quad-float multiply emulation.David S. Miller
Something is wrong with the 3-multiply (vs. 4-multiply) optimized version of _FP_MUL_MEAT_2_*(), so just use the slower version which actually computes correct values. Noticed by Rene Rebe Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21[SPARC]: Kill prom_getname, unused and not implemented properly.David S. Miller
The m68k port's sun3 asm/oplib.h had a stray reference too, so I killed that off as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21[SPARC64]: Fix more of_device layer IRQ bugs, and correct PROMREG_MAX.David S. Miller
Sabre and Psycho PCI controllers can have partial interrupt-map properties, meaning that on-board devices don't match up to any entries. Instead, they are fully specified from the beginning and we should pass them directly to the IRQ translator as-is. Also, fill in the necessary translator slots for the "graphics" and "expansion UPA" interrupts on Sabre, Psycho, and SYSIO SBUS. Increase PROMREG_MAX to 24, as seen on SUNW,ffb devices. Finally, prevent accidentally writing past the end of the of_device struct resource[] and irqs[] arrays. Spit out a log message when we ignore some entries because there are too many of them. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-14[PATCH] remove set_wmb - arch removalSteven Rostedt
set_wmb should not be used in the kernel because it just confuses the code more and has no benefit. Since it is not currently used in the kernel this patch removes it so that new code does not include it. All archs define set_wmb(var, value) to do { var = value; wmb(); } while(0) except ia64 and sparc which use a mb() instead. But this is still moot since it is not used anyway. Hasn't been tested on any archs but x86 and x86_64 (and only compiled tested) Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-13[SPARC64]: Fix make headers_installDavid Woodhouse
A minor typo in the include/asm-sparc64/Kbuild file prevents the make headers_install from building a useful tree of kernel headers for sparc64. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Tom "spot" Callaway <tcallawa@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05[SPARC64]: Fix sparc64 build errors when CONFIG_PCI=n.Randy Dunlap
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-04Merge git://git.infradead.org/hdrinstall-2.6Linus Torvalds
* git://git.infradead.org/hdrinstall-2.6: Remove export of include/linux/isdn/tpam.h Remove <linux/i2c-id.h> and <linux/i2c-algo-ite.h> from userspace export Restrict headers exported to userspace for SPARC and SPARC64 Add empty Kbuild files for 'make headers_install' in remaining arches. Add Kbuild file for Alpha 'make headers_install' Add Kbuild file for SPARC 'make headers_install' Add Kbuild file for IA64 'make headers_install' Add Kbuild file for S390 'make headers_install' Add Kbuild file for i386 'make headers_install' Add Kbuild file for x86_64 'make headers_install' Add Kbuild file for PowerPC 'make headers_install' Add generic Kbuild files for 'make headers_install' Basic implementation of 'make headers_check' Basic implementation of 'make headers_install'
2006-07-03[PATCH] lockdep: add per_cpu_offset()Ingo Molnar
Add the per_cpu_offset() generic method. (used by the lock validator) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02[PATCH] irq-flags: SPARC64: Use the new IRQF_ constantsThomas Gleixner
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30[SPARC64]: Kill sun4v virtual device layer.David S. Miller
Replace with a simple IRQ translater in the PROM device tree builder. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) [TIPC]: Initial activation message now includes TIPC version number [TIPC]: Improve response to requests for node/link information [TIPC]: Fixed skb_under_panic caused by tipc_link_bundle_buf [IrDA]: Fix the AU1000 FIR dependencies [IrDA]: Fix RCU lock pairing on error path [XFRM]: unexport xfrm_state_mtu [NET]: make skb_release_data() static [NETFILTE] ipv4: Fix typo (Bugzilla #6753) [IrDA]: MCS7780 usb_driver struct should be static [BNX2]: Turn off link during shutdown [BNX2]: Use dev_kfree_skb() instead of the _irq version [ATM]: basic sysfs support for ATM devices [ATM]: [suni] change suni_init to __devinit [ATM]: [iphase] should be __devinit not __init [ATM]: [idt77105] should be __devinit not __init [BNX2]: Add NETIF_F_TSO_ECN [NET]: Add ECN support for TSO [AF_UNIX]: Datagram getpeersec [NET]: Fix logical error in skb_gso_ok [PKT_SCHED]: PSCHED_TADD() and PSCHED_TADD2() can result,tv_usec >= 1000000 ...
2006-06-29[AF_UNIX]: Datagram getpeersecCatherine Zhang
This patch implements an API whereby an application can determine the label of its peer's Unix datagram sockets via the auxiliary data mechanism of recvmsg. Patch purpose: This patch enables a security-aware application to retrieve the security context of the peer of a Unix datagram socket. The application can then use this security context to determine the security context for processing on behalf of the peer who sent the packet. Patch design and implementation: The design and implementation is very similar to the UDP case for INET sockets. Basically we build upon the existing Unix domain socket API for retrieving user credentials. Linux offers the API for obtaining user credentials via ancillary messages (i.e., out of band/control messages that are bundled together with a normal message). To retrieve the security context, the application first indicates to the kernel such desire by setting the SO_PASSSEC option via getsockopt. Then the application retrieves the security context using the auxiliary data mechanism. An example server application for Unix datagram socket should look like this: toggle = 1; toggle_len = sizeof(toggle); setsockopt(sockfd, SOL_SOCKET, SO_PASSSEC, &toggle, &toggle_len); recvmsg(sockfd, &msg_hdr, 0); if (msg_hdr.msg_controllen > sizeof(struct cmsghdr)) { cmsg_hdr = CMSG_FIRSTHDR(&msg_hdr); if (cmsg_hdr->cmsg_len <= CMSG_LEN(sizeof(scontext)) && cmsg_hdr->cmsg_level == SOL_SOCKET && cmsg_hdr->cmsg_type == SCM_SECURITY) { memcpy(&scontext, CMSG_DATA(cmsg_hdr), sizeof(scontext)); } } sock_setsockopt is enhanced with a new socket option SOCK_PASSSEC to allow a server socket to receive security context of the peer. Testing: We have tested the patch by setting up Unix datagram client and server applications. We verified that the server can retrieve the security context using the auxiliary data mechanism of recvmsg. Signed-off-by: Catherine Zhang <cxzhang@watson.ibm.com> Acked-by: Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29[SPARC64]: of_device layer IRQ resolutionDavid S. Miller
Do IRQ determination generically by parsing the PROM properties, and using IRQ controller drivers for final resolution. One immediate positive effect is that all of the IRQ frobbing in the EBUS, ISA, and PCI controller layers has been eliminated. We just look up the of_device and use the properly computed value. The PCI controller irq_build() routines are gone and no longer used. Unfortunately sbus_build_irq() has to remain as there is a direct reference to this in the sunzilog driver. That can be killed off once the sparc32 side of this is written and the sunzilog driver is transformed into an "of" bus driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29[SPARC]: Kill interrupt stuff and linux_phandle from device_node.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29[SPARC]: Add of_io{remap,unmap}().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29[SPARC]: Beginnings of generic of_device framework.David S. Miller
The idea is to fully construct the device register and interrupt values into these of_device objects, and convert all of SBUS, EBUS, ISA drivers to use this new stuff. Much ideas and code taken from Ben H.'s powerpc work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29[SPARC]: Add of_n_{addr,size}_cells().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29[SPARC64]: Kill starfire_cookie from SBUS/PCI.David S. Miller
Totally unused. We need to traverse the list of global IRQ translaters, so storing it in the per-bus structures was useless. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-27[PATCH] sched: mc/smt power savings sched policySiddha, Suresh B
sysfs entries 'sched_mc_power_savings' and 'sched_smt_power_savings' in /sys/devices/system/cpu/ control the MC/SMT power savings policy for the scheduler. Based on the values (1-enable, 0-disable) for these controls, sched groups cpu power will be determined for different domains. When power savings policy is enabled and under light load conditions, scheduler will minimize the physical packages/cpu cores carrying the load and thus conserving power(with a perf impact based on the workload characteristics... see OLS 2005 CMP kernel scheduler paper for more details..) Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Con Kolivas <kernel@kolivas.org> Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Add iomap interfaces. [OPENPROM]: Rewrite driver to use in-kernel device tree. [OPENPROMFS]: Rewrite using in-kernel device tree and seq_file. [SPARC]: Add unique device_node IDs and a ".node" property. [SPARC]: Add of_set_property() interface. [SPARC64]: Export auxio_register to modules. [SPARC64]: Add missing interfaces to dma-mapping.h [SPARC64]: Export _PAGE_IE to modules. [SPARC64]: Allow floppy driver to build modular. [SPARC]: Export x_bus_type to modules. [RIOWATCHDOG]: Fix the build. [CPWATCHDOG]: Fix the build. [PARPORT] sunbpp: Fix typo. [MTD] sun_uflash: Port to new EBUS device layer.
2006-06-26[PATCH] Notify page fault call chainAnil S Keshavamurthy
With this patch Kprobes now registers for page fault notifications only when their is an active probe registered. Once all the active probes are unregistered their is no need to be notified of page faults and kprobes unregisters itself from the page fault notifications. Hence we will have ZERO side effects when no probes are active. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] Notify page fault call chain for sparc64Anil S Keshavamurthy
Overloading of page fault notification with the notify_die() has performance issues(since the only interested components for page fault is kprobes and/or kdb) and hence this patch introduces the new notifier call chain exclusively for page fault notifications their by avoiding notifying unnecessary components in the do_page_fault() code path. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[SPARC]: Add unique device_node IDs and a ".node" property.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-25[SPARC]: Add of_set_property() interface.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-25[SPARC64]: Add missing interfaces to dma-mapping.hDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-25[SPARC64]: Allow floppy driver to build modular.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-25[PATCH] Define __raw_get_cpu_var and use itPaul Mackerras
There are several instances of per_cpu(foo, raw_smp_processor_id()), which is semantically equivalent to __get_cpu_var(foo) but without the warning that smp_processor_id() can give if CONFIG_DEBUG_PREEMPT is enabled. For those architectures with optimized per-cpu implementations, namely ia64, powerpc, s390, sparc64 and x86_64, per_cpu() turns into more and slower code than __get_cpu_var(), so it would be preferable to use __get_cpu_var on those platforms. This defines a __raw_get_cpu_var(x) macro which turns into per_cpu(x, raw_smp_processor_id()) on architectures that use the generic per-cpu implementation, and turns into __get_cpu_var(x) on the architectures that have an optimized per-cpu implementation. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[SBUS]: Rewrite and plug into of_device framework.David S. Miller
I severely apologize, I was still learning how to program in C when I wrote this stuff 10 years ago... Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC]: Port of_device layer and make ebus use it.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC64]: Add of_device layer and make ebus/isa use it.David S. Miller
Sparcspkr and power drivers are converted, to make sure it works. Eventually the SBUS device layer will use this as a sub-class. I really cannot cut loose on that bit until sparc32 is given the same infrastructure. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC64]: Expand of_*() interfaces some more.David S. Miller
Import some more stuff from powerpc. Add of_device_is_compatible(), and of_find_compatible_node(). Export some more of the other routines to modules. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC64]: Convert central bus layer to in-kernel PROM device tree.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC64]: Kill ebus/isa range and interrupt mapping struct members.David S. Miller
Unused outside of initial bus probe scan. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC64]: Use in-kernel PROM tree for EBUS and ISA.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC64]: Convert sparc64 PCI layer to in-kernel device tree.David S. Miller
One thing this change pointed out was that we really should pull the "get 'local-mac-address' property" logic into a helper function all the network drivers can call. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC64]: Fix for Niagara memory corruption.David S. Miller
On some sun4v systems, after netboot the ethernet controller and it's DMA mappings can be left active. The net result is that the kernel can end up using memory the ethernet controller will continue to DMA into, resulting in corruption. To deal with this, we are more careful about importing IOMMU translations which OBP has left in the IO-TLB. If the mapping maps into an area the firmware claimed was free and available memory for the kernel to use, we demap instead of import that IOMMU entry. This is going to cause the network chip to take a PCI master abort on the next DMA it attempts, if it has been left going like this. All tests show that this is handled properly by the PCI layer and the e1000 drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC64]: Convert cpu_find_by_*() interface to in-kernel PROM device tree.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC64]: Add of_getintprop_default().David S. Miller
This encodes a common idiomatic coding pattern used when dealing with integer properties. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC64]: Convert sun4v virtual-device layer to in-kernel PROM device tree.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC64]: Use in-kernel OBP device tree for PCI controller probing.David S. Miller
It can be pushed even further down, but this is a first step. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC64]: Add of_find_node_by_{name,type}().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SPARC64]: Import OBP device tree into kernel data structures.David S. Miller
The basic framework is based on the PowerPC OF code. This code even tries to get the device addressing components correct in the full path names. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SBUS]: Start cleaning up generic sbus support layer.David S. Miller
In particular, move the IRQ probing out to sparc32/sparc64 arch specific code where it belongs. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-22[PATCH] vgacon: make VGA_MAP_MEM take size, remove extra useBjorn Helgaas
VGA_MAP_MEM translates to ioremap() on some architectures. It makes sense to do this to vga_vram_base, because we're going to access memory between vga_vram_base and vga_vram_end. But it doesn't really make sense to map starting at vga_vram_end, because we aren't going to access memory starting there. On ia64, which always has to be different, ioremapping vga_vram_end gives you something completely incompatible with ioremapped vga_vram_start, so vga_vram_size ends up being nonsense. As a bonus, we often know the size up front, so we can use ioremap() correctly, rather than giving it a zero size. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-20Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Update defconfig. [SPARC64]: Don't double-export synchronize_irq. [SPARC64]: Move over to GENERIC_HARDIRQS. [SPARC64]: Virtualize IRQ numbers. [SPARC64]: Kill ino_bucket->pil [SPARC]: Kill __irq_itoa(). [SPARC64]: bp->pil can never be zero [SPARC64]: Send all device interrupts via one PIL. [SPARC]: Fix iommu_flush_iotlb end address [SPARC]: Mark smp init functions as cpuinit [SPARC]: Add missing rw can_lock macros [SPARC]: Setup cpu_possible_map [SPARC]: Add topology_init()
2006-06-20Merge git://git.infradead.org/hdrcleanup-2.6Linus Torvalds
* git://git.infradead.org/hdrcleanup-2.6: (63 commits) [S390] __FD_foo definitions. Switch to __s32 types in joystick.h instead of C99 types for consistency. Add <sys/types.h> to headers included for userspace in <linux/input.h> Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.h Remove struct fddi_statistics from user view in <linux/if_fddi.h> Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390 Revert include/media changes: Mauro says those ioctls are only used in-kernel(!) Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h> Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> too Remove private struct dx_hash_info from public view in <linux/ext3_fs.h> Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h> Use __uXX types in <linux/divert.h> for struct divert_blk et al. Use __u32 for elf_addr_t in <asm-powerpc/elf.h>, not u32. It's user-visible. Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirely Use __uXX types in user-visible structures in <linux/nbd.h> Don't use 'u32' in user-visible struct ip_conntrack_old_tuple. Use __uXX types for S390 DASD volume label definitions which are user-visible S390 BIODASDREADCMB ioctl should use __u64 not u64 type. Remove unneeded inclusion of <linux/time.h> from <linux/ufs_fs.h> Fix private integer types used in V4L2 ioctls. ... Manually resolve conflict in include/linux/mtd/physmap.h
2006-06-20[SPARC64]: Move over to GENERIC_HARDIRQS.David S. Miller
This is the long overdue conversion of sparc64 over to the generic IRQ layer. The kernel image is slightly larger, but the BSS is ~60K smaller due to the reduced size of struct ino_bucket. A lot of IRQ implementation details, including ino_bucket, were moved out of asm-sparc64/irq.h and are now private to arch/sparc64/kernel/irq.c, and most of the code in irq.c totally disappeared. One thing that's different at the moment is IRQ distribution, we do it at enable_irq() time. If the cpu mask is ALL then we round-robin using a global rotating cpu counter, else we pick the first cpu in the mask to support single cpu targetting. This is similar to what powerpc's XICS IRQ support code does. This works fine on my UP SB1000, and the SMP build goes fine and runs on that machine, but lots of testing on different setups is needed. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20[SPARC64]: Virtualize IRQ numbers.David S. Miller
Inspired by PowerPC XICS interrupt support code. All IRQs are virtualized in order to keep NR_IRQS from needing to be too large. Interrupts on sparc64 are arbitrary 11-bit values, but we don't need to define NR_IRQS to 2048 if we virtualize the IRQs. As PCI and SBUS controller drivers build device IRQs, we divy out virtual IRQ numbers incrementally starting at 1. Zero is a special virtual IRQ used for the timer interrupt. So device drivers all see virtual IRQs, and all the normal interfaces such as request_irq(), enable_irq(), etc. translate that into a real IRQ number in order to configure the IRQ. At this point knowledge of the struct ino_bucket is almost entirely contained within arch/sparc64/kernel/irq.c There are a few small bits in the PCI controller drivers that need to be swept away before we can remove ino_bucket's definition out of asm-sparc64/irq.h and privately into kernel/irq.c Signed-off-by: David S. Miller <davem@davemloft.net>