aboutsummaryrefslogtreecommitdiff
path: root/include/asm-x86
AgeCommit message (Collapse)Author
2008-07-18Merge branch 'linus' into core/generic-dma-coherentIngo Molnar
Conflicts: kernel/Makefile Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-17Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix asm/e820.h for userspace inclusion x86: fix numaq_tsc_disable x86: fix kernel_physical_mapping_init() for large x86 systems
2008-07-17x86: fix asm/e820.h for userspace inclusionRusty Russell
asm-x86/e820.h is included from userspace. 'x86: make e820.c to have common functions' (b79cd8f1268bab57ff85b19d131f7f23deab2dee) broke it: make -C Documentation/lguest cc -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include lguest.c -lz -o lguest In file included from ../../include/asm-x86/bootparam.h:8, from lguest.c:45: ../../include/asm/e820.h:66: error: expected ‘)’ before ‘start’ ../../include/asm/e820.h:67: error: expected ‘)’ before ‘start’ ../../include/asm/e820.h:68: error: expected ‘)’ before ‘start’ ../../include/asm/e820.h:72: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘e820_update_range’ ... Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits) Revert "x86/PCI: ACPI based PCI gap calculation" PCI: remove unnecessary volatile in PCIe hotplug struct controller x86/PCI: ACPI based PCI gap calculation PCI: include linux/pm_wakeup.h for device_set_wakeup_capable PCI PM: Fix pci_prepare_to_sleep x86/PCI: Fix PCI config space for domains > 0 Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n PCI: Simplify PCI device PM code PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep PCI ACPI: Rework PCI handling of wake-up ACPI: Introduce new device wakeup flag 'prepared' ACPI: Introduce acpi_device_sleep_wake function PCI: rework pci_set_power_state function to call platform first PCI: Introduce platform_pci_power_manageable function ACPI: Introduce acpi_bus_power_manageable function PCI: make pci_name use dev_name PCI: handle pci_name() being const PCI: add stub for pci_set_consistent_dma_mask() PCI: remove unused arch pcibios_update_resource() functions PCI: fix pci_setup_device()'s sprinting into a const buffer ... Fixed up conflicts in various files (arch/x86/kernel/setup_64.c, arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c, drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86 and ACPI updates manually.
2008-07-16ACPI : Create "idle=nomwait" bootparamZhao Yakui
"idle=nomwait" disables the use of the MWAIT instruction from both C1 (C1_FFH) and deeper (C2C3_FFH) C-states. When MWAIT is unavailable, the BIOS and OS generally negotiate to use the HALT instruction for C1, and use IO accesses for deeper C-states. This option is useful for power and performance comparisons, and also to work around BIOS bugs where broken MWAIT support is advertised. http://bugzilla.kernel.org/show_bug.cgi?id=10807 http://bugzilla.kernel.org/show_bug.cgi?id=10914 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: Create "idle=halt" bootparamZhao Yakui
"idle=halt" limits the idle loop to using the halt instruction. No MWAIT, no IO accesses, no C-states deeper than C1. If something is broken in the idle code, "idle=halt" is a less severe workaround than "idle=poll" which disables all power savings. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-15Merge branch 'generic-ipi' into generic-ipi-for-linusIngo Molnar
Conflicts: arch/powerpc/Kconfig arch/s390/kernel/time.c arch/x86/kernel/apic_32.c arch/x86/kernel/cpu/perfctr-watchdog.c arch/x86/kernel/i8259_64.c arch/x86/kernel/ldt.c arch/x86/kernel/nmi_64.c arch/x86/kernel/smpboot.c arch/x86/xen/smp.c include/asm-x86/hw_irq_32.h include/asm-x86/hw_irq_64.h include/asm-x86/mach-default/irq_vectors.h include/asm-x86/mach-voyager/irq_vectors.h include/asm-x86/smp.h kernel/Makefile Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15x86: Fix compile error with CONFIG_AS_CFI=nKevin Winchester
AS arch/x86/lib/csum-copy_64.o arch/x86/lib/csum-copy_64.S: Assembler messages: arch/x86/lib/csum-copy_64.S:48: Error: Macro `ignore' was already defined make[1]: *** [arch/x86/lib/csum-copy_64.o] Error 1 make: *** [arch/x86/lib] Error 2 It appears that csum-copy_64.S and dwarf2.h both define an ignore macro. I would expect one of them can be renamed quite easily, unless they are references elsewhere. Caused-by-commit: 392a0fc96bd059b38564f5f8fb58327460cb5a9d x86: merge dwarf2 headers Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-14Merge branch 'auto-ftrace-next' into tracing/for-linusIngo Molnar
Conflicts: arch/x86/kernel/entry_32.S arch/x86/kernel/process_32.c arch/x86/kernel/process_64.c arch/x86/lib/Makefile include/asm-x86/irqflags.h kernel/Makefile kernel/sched.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-14Merge commit 'v2.6.26' into x86/coreIngo Molnar
2008-07-14x86: make 64bit hpet_set_mapping to use ioremap too, v2Yinghai Lu
keep the one for VSYSCALL_HPET Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-13x86: change _node_to_cpumask_ptr to return const ptrMike Travis
* Strengthen the return type for the _node_to_cpumask_ptr to be a const pointer. This adds compiler checking to insure that node_to_cpumask_map[] is not changed inadvertently. Signed-off-by: Mike Travis <travis@sgi.com> Cc: "akpm@linux-foundation.org" <akpm@linux-foundation.org> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Acked-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-13x86: I/O APIC: remove an IRQ2-mask hackMaciej W. Rozycki
Now that IRQ2 is never made available to the I/O APIC, there is no need to special-case it and mask as a workaround for broken systems. Actually, because of the former, mask_IO_APIC_irq(2) is a no-op already. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-13x86: fix numaq_tsc_disable callingYinghai Lu
got this on a test-system: calling numaq_tsc_disable+0x0/0x39 NUMAQ: disabling TSC initcall numaq_tsc_disable+0x0/0x39 returned 0 after 0 msecs that's because we should not be using arch_initcall to call numaq_tsc_disable. need to call it in setup_arch before time_init()/tsc_init() and call it in init_intel() to make the cpu feature bits right. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix ldt limit for 64 bit
2008-07-12x86: fix ldt limit for 64 bitMichael Karcher
Fix size of LDT entries. On x86-64, ldt_desc is a double-sized descriptor. Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11Merge branch 'x86/generalize-visws' into x86/coreIngo Molnar
2008-07-11x86: merge dwarf2 headersGlauber Costa
Merge dwarf2_32.h and dwarf2_64.h into dwarf2.h. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11x86: use AS_CFI instead of UNWIND_INFOGlauber Costa
In dwarf2_32.h, test for CONFIG_AS_CFI instead of CONFIG_UNWIND_INFO. Turns out that searching for UNWIND_INFO returns no match in any Kconfig or Makefile, so we're really just throwing everything away regarding dwarf frames for i386. The test that generates CONFIG_AS_CFI does not have anything x86_64-specific, and right now, checking V=1 builds shows me that the flags is there anyway, although unused. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11x86: use ignore macro instead of hash commentGlauber Costa
In dwarf_64.h header, use the "ignore" macro the way i386 does. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11x86: fix savesegment() bug causing crashes on 64-bitIngo Molnar
i spent a fair amount of time chasing a 64-bit bootup crash that manifested itself as bootup segfaults: S10network[1825]: segfault at 7f3e2b5d16b8 ip 00000031108748c9 sp 00007fffb9c14c70 error 4 in libc-2.7.so[3110800000+14d000] eventually causing init to die and panic the system: Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.26-rc9-tip #13878 after a maratonic bisection session, the bad commit turned out to be: | b7675791859075418199c7af86a116ea34eaf5bd is first bad commit | commit b7675791859075418199c7af86a116ea34eaf5bd | Author: Jeremy Fitzhardinge <jeremy@goop.org> | Date: Wed Jun 25 00:19:00 2008 -0400 | | x86: remove open-coded save/load segment operations | | This removes a pile of buggy open-coded implementations of savesegment | and loadsegment. after some more bisection of this patch itself, it turns out that what makes the difference are the savesegment() changes to __switch_to(). Taking a look at this portion of arch/x86/kernel/process_64.o revealed this crutial difference: | good: 99c: 8c e0 mov %fs,%eax | 99e: 89 45 cc mov %eax,-0x34(%rbp) | | bad: 99c: 8c 65 cc mov %fs,-0x34(%rbp) which is due to: | unsigned fsindex; | - asm volatile("movl %%fs,%0" : "=r" (fsindex)); | + savesegment(fs, fsindex); savesegment() is implemented as: #define savesegment(seg, value) \ asm("mov %%" #seg ",%0":"=rm" (value) : : "memory") note the "m" modifier - it allows GCC to generate the segment move into a memory operand as well. But regarding segment operands there's a subtle detail in the x86 instruction set: the above 16-bit moves are zero-extend, but only if it goes to a register. If it goes to a memory operand, -0x34(%rbp) in the above case, there's no zero-extend to 32-bit and the instruction will only save 16 bits instead of the intended 32-bit. The other 16 bits is random data - which can cause problems when that value is used later on. The solution is to only allow segment operands to go to registers. This fix allows my test-system to boot up without crashing. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11x86_64: add pseudo-features for 32-bit compat syscallJeremy Fitzhardinge
Add pseudo-feature bits to describe whether the CPU supports sysenter and/or syscall from ia32-compat userspace. This removes a hardcoded test in vdso32-setup. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11x86: introduce max_low_pfn_mapped for 64-bitYinghai Lu
when more than 4g memory is installed, don't map the big hole below 4g. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, add NR_IRQS quirkIngo Molnar
NR_IRQS: let VISWS be just a sub-case of the generic code. This can create a somewhat larger irq_desc[] array if NR_CPUS is high but that should not worry VisWS which has 4 CPUs at most. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, eliminate ↵Ingo Molnar
include/asm-x86/mach-visws/setup_arch.h use the generic version of setup_arch.h - it's the same. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, move definitionsIngo Molnar
move the SGIVW definitions from setup_arch.h into its own header file. preparation for turning VISWS into a generic PC architecture. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, create include/asm-x86/visws/Ingo Molnar
move the include/asm-x86/mach-visws/ VISWS specific hardware details include files into include/asm-x86/visws, to be used from generic code. No code changed. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, eliminate asm-x86/mach-visws/mach_apicdef.hIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, update asm-x86/mach-visws/mach_apicdef.hIngo Molnar
update asm-x86/mach-visws/mach_apicdef.h to the generic version. This should work fine as VISWS has a standard local APIC and thus its mach_apicdef.h copy is just an ancient version of the generic code. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, eliminate ↵Ingo Molnar
include/asm-x86/mach-visws/smpboot_hooks.h now that include/asm-x86/mach-visws/smpboot_hooks.h equals to the default file in ../mach-default/smpboot_hooks.h, simply include it instead of maintaining a copy. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, update ↵Ingo Molnar
include/asm-x86/mach-visws/smpboot_hooks.h update include/asm-x86/mach-visws/smpboot_hooks.h to include/asm-x86/mach-default/smpboot_hooks.h (the generic version). this _should_ work, because VISWS sets skip_ioapic_setup, but it should be tested on a real VISWS to make sure. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, enhance ↵Ingo Molnar
include/asm-x86/mach-default/smpboot_hooks.h Allow the generic smpboot quirks code to be built with ONFIG_X86_IO_APIC disabled. This way VISWS will be able to use it as-is. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, eliminate ↵Ingo Molnar
include/asm-x86/mach-visws/mach_apic.h now that include/asm-x86/mach-visws/mach_apic.h equals to include/asm-x86/mach-default/mach_apic.h, simply start using the generic one. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, update asm-x86/mach-visws/mach_apic.hIngo Molnar
update asm-x86/mach-visws/mach_apic.h to the generic version. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, install proper PCI quirkIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86: add early quirk supportIngo Molnar
Add early quirks support. In preparation of enabling the generic architecture to boot on a VISWS. This will allow us to remove the VISWS subarch and all its complications. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, visws: use mach-default/entry_arch.hIngo Molnar
mach-default/entry_arch.h is exactly the same file as mach-visws/entry_arch.h, so include the first from the second, so that updates to the generic one get picked up by VISWS as well. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, visws: fix generic-ipi buildIngo Molnar
fix: arch/x86/kernel/built-in.o: In function `smp_intr_init': (.init.text+0x49e2): undefined reference to `call_function_single_interrupt' Caused by include/asm-x86/mach-visws/entry_arch.h getting out of sync with the include/asm-x86/mach-default/entry_arch.h file it derives from. Copy the default file over - next step will be to simply include the default file. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10Merge branch 'tracing/mmiotrace' into auto-ftrace-nextIngo Molnar
2008-07-10Merge branch 'tracing/ftrace' into auto-ftrace-nextIngo Molnar
2008-07-10x86: clean up iommu.h and gart.hFUJITA Tomonori
This remove lots of duplications in iommu.h and gart.h. The end result of this patch is: - iommu.h is a header file for everyone related with IOMMUs. - gart.h is the private header file. Only pci-gart_64.c and its friends include it. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: fujita.tomonori@lab.ntt.co.jp Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10Merge branch 'x86/gart' into x86/coreIngo Molnar
2008-07-10x86, acpi: merge __acpi_map_tableYinghai Lu
and let 64-bit to fall back to use fixmap too. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86: build fix for "x86: fix C1E && nx6325 stability problem"Ingo Molnar
fix: arch/x86/kernel/built-in.o: In function `dmi_ignore_irq0_timer_override': boot.c:(.init.text+0x3ea4): undefined reference to `force_mask_ioapic_irq_2' Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86: introduce copy_user_handle_tail() routineVitaly Mayatskikh
Introduce generic C routine for handling necessary tail operations after protection fault in copy_*_user on x86. Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09Merge branch 'x86/unify-lib' into x86/coreIngo Molnar
2008-07-09x86: fix C1E && nx6325 stability problemRafael J. Wysocki
The problems are that, with the ACPI vs timer overring issue _fixed_, after using the box for some time (between several seconds and 1 hour, at random) processes get very high CPU loads (once I've got X using 107% of the CPU, for example) and the system becomes unresponsive, as though there were interrupts lost or something similar. Andreas Herrman reproduced similar problems: > Ok, now I've reproduced the stability problem. > - Using tip/master, > - reverting e38502eb8aa82314d5ab0eba45f50e6790dadd88 and > - applying your patch from this posting > http://marc.info/?l=linux-kernel&m=121539354224562&w=4 > > Starting X, firefox, gimp, tuxpaint and doing some drawing in tuxpaint > results in a slow system. Drawing is almost not possible anymore -- > Selections of new colors, cursors etc. is performed with huge delay > if it's performed at all. > > BTW, the code sets up timer IRQ as Virtual Wire IRQ: > > Jul 8 14:57:58 kodscha IO-APIC (apicid-pin) 2-22, 2-23 not connected. > Jul 8 14:57:58 kodscha ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > Jul 8 14:57:58 kodscha ...trying to set up timer as Virtual Wire IRQ... works. > > and both INT0 and INT2 of IOAPIC are masked: > > Jul 8 14:57:58 kodscha NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > Jul 8 14:57:58 kodscha 00 000 1 0 0 0 0 0 0 00 > Jul 8 14:57:58 kodscha 01 003 0 0 0 0 0 1 1 31 > Jul 8 14:57:58 kodscha 02 003 1 0 0 0 0 0 0 30 > > I've also seen strange CPU utilization -- with syslog-ng: > > top - 15:33:06 up 35 min, 4 users, load average: 1.70, 0.68, 0.37 > Tasks: 64 total, 4 running, 60 sleeping, 0 stopped, 0 zombie > Cpu0 : 0.0%us,100.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st > Cpu1 : 6.4%us, 87.2%sy, 0.0%ni, 5.8%id, 0.0%wa, 0.6%hi, 0.0%si, 0.0%st > Mem: 895384k total, 283568k used, 611816k free, 35492k buffers > Swap: 1959920k total, 0k used, 1959920k free, 163044k cached > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND > 4632 root 20 0 17216 800 580 S 104 0.1 0:34.22 syslog-ng > 28505 root 20 0 205m 11m 4024 S 6 1.3 0:21.16 X > 28518 root 20 0 56292 5652 4492 S 1 0.6 0:01.80 fluxbox > 1 root 20 0 3724 608 508 S 0 0.1 0:00.36 init > > So far I have no clue why C1E-idle in conjunction with virtual wire > mode causes this strange behaviour. > > ... and I start to think about the root cause of all this. > > I've performed similar tests under X with the IRQ0/INT0 configuration and > I did not see above symptoms. So lets fall back to the IRQ0/INT0 configuration on this box. This basically restores the dont-use-the-lapic-timer exception mechanism that was unconditional on this box prior commit 8750bf5 ("x86: add C1E aware idle function"). Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86, iommu: replace CONFIG_IOMMU with CONFIG_GART_IOMMU in iommu.hFUJITA Tomonori
Hmm, looks like it would be nice to have more cleanups of iommu.h and gart.h. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86: make max_pfn cover acpi table below 4gYinghai Lu
When system have 4g less ram installed, and acpi table sit near end of ram, make max_pfn cover them too, so 64bit kernel don't need to mess up fixmap. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: "Suresh Siddha" <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86: define architectural characteristics in uaccess.h.Glauber Costa
Remove them from the arch-specific file. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>