aboutsummaryrefslogtreecommitdiff
path: root/include/asm-x86_64/mtrr.h
AgeCommit message (Collapse)Author
2007-05-02[PATCH] x86: Save the MTRRs of the BSP before booting an APBernhard Kaindl
Applied fix by Andew Morton: http://lkml.org/lkml/2007/4/8/88 - Fix `make headers_check'. AMD and Intel x86 CPU manuals state that it is the responsibility of system software to initialize and maintain MTRR consistency across all processors in Multi-Processing Environments. Quote from page 188 of the AMD64 System Programming manual (Volume 2): 7.6.5 MTRRs in Multi-Processing Environments "In multi-processing environments, the MTRRs located in all processors must characterize memory in the same way. Generally, this means that identical values are written to the MTRRs used by the processors." (short omission here) "Failure to do so may result in coherency violations or loss of atomicity. Processor implementations do not check the MTRR settings in other processors to ensure consistency. It is the responsibility of system software to initialize and maintain MTRR consistency across all processors." Current Linux MTRR code already implements the above in the case that the BIOS does not properly initialize MTRRs on the secondary processors, but the case where the fixed-range MTRRs of the boot processor are changed after Linux started to boot, before the initialsation of a secondary processor, is not handled yet. In this case, secondary processors are currently initialized by Linux with MTRRs which the boot processor had very early, when mtrr_bp_init() did run, but not with the MTRRs which the boot processor uses at the time when that secondary processors is actually booted, causing differing MTRR contents on the secondary processors. Such situation happens on Acer Ferrari 1000 and 5000 notebooks where the BIOS enables and sets AMD-specific IORR bits in the fixed-range MTRRs of the boot processor when it transitions the system into ACPI mode. The SMI handler of the BIOS does this in SMM, entered while Linux ACPI code runs acpi_enable(). Other occasions where the SMI handler of the BIOS may change bits in the MTRRs could occur as well. To initialize newly booted secodary processors with the fixed-range MTRRs which the boot processor uses at that time, this patch saves the fixed-range MTRRs of the boot processor before new secondary processors are started. When the secondary processors run their Linux initialisation code, their fixed-range MTRRs will be updated with the saved fixed-range MTRRs. If CONFIG_MTRR is not set, we define mtrr_save_state as an empty statement because there is nothing to do. Possible TODOs: *) CPU-hotplugging outside of SMP suspend/resume is not yet tested with this patch. *) If, even in this case, an AP never runs i386/do_boot_cpu or x86_64/cpu_up, then the calls to mtrr_save_state() could be replaced by calls to mtrr_save_fixed_ranges(NULL) and mtrr_save_state() would not be needed. That would need either verification of the CPU-hotplug code or at least a test on a >2 CPU machine. *) The MTRRs of other running processors are not yet checked at this time but it might be interesting to syncronize the MTTRs of all processors before booting. That would be an incremental patch, but of rather low priority since there is no machine known so far which would require this. AK: moved prototypes on x86-64 around to fix warnings Signed-off-by: Bernhard Kaindl <bk@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Dave Jones <davej@codemonkey.org.uk>
2007-05-02[PATCH] x86: Adds mtrr_save_fixed_ranges() for use in two later patches.Bernhard Kaindl
In this current implementation which is used in other patches, mtrr_save_fixed_ranges() accepts a dummy void pointer because in the current implementation of one of these patches, this function may be called from smp_call_function_single() which requires that this function takes a void pointer argument. This function calls get_fixed_ranges(), passing mtrr_state.fixed_ranges which is the element of the static struct which stores our current backup of the fixed-range MTRR values which all CPUs shall be using. Because mtrr_save_fixed_ranges calls get_fixed_ranges after kernel initialisation time, __init needs to be removed from the declaration of get_fixed_ranges(). If CONFIG_MTRR is not set, we define mtrr_save_fixed_ranges as an empty statement because there is nothing to do. AK: Moved prototypes for x86-64 around to fix warnings Signed-off-by: Bernhard Kaindl <bk@suse.de> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Dave Jones <davej@codemonkey.org.uk>
2007-05-02[PATCH] x86-64: Move mtrr prototypes from proto.h to mtrr.hAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de>
2006-05-21Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.hDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26Don't include linux/config.h from anywhere else in include/David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-10-30[PATCH] Clean up mtrr compat ioctl codeBrian Gerst
Handle 32-bit mtrr ioctls in the mtrr driver instead of the ia32 compatability layer. Signed-off-by: Brian Gerst <bgerst@didntduck.org> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!