aboutsummaryrefslogtreecommitdiff
path: root/include/asm-x86_64/proto.h
AgeCommit message (Collapse)Author
2006-12-07[PATCH] x86: fix the irqbalance quirk for E7320/E7520/E7525Siddha, Suresh B
Move the irqbalance quirks for E7320/E7520/E7525(Errata 23 in http://download.intel.com/design/chipsets/specupdt/30304203.pdf) to early quirks. And add a PCI quirk for these platforms to check(which happens very late during the boot) if the APIC routing is indeed set to default flat mode. This fixes the breakage(in x86_64) of this quirk due to cpu hotplug which selects physical mode instead of the logical flat(as needed for this errata workaround). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: "Li, Shaohua" <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] x86-64: remove prototype of free_bootmem_generic()Jan Beulich
The function doesn't exist (anymore). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-21[PATCH] x86-64: Revert timer routing behaviour back to 2.6.16 stateAndi Kleen
By default route the 8254 over the 8259 and only disable it on ATI boards where this causes double timer interrupts. This should unbreak some Nvidia boards where the timer doesn't seem to tick of it isn't enabled in the 8259. At least one VIA board also seemed to have a little trouble with the disabled 8259. For 2.6.20 we'll try both dynamically without black listing, but I think for .19 this is the safer approach because it has been already well tested in earlier kernels. This also makes the x86-64 behaviour the same as i386. Command line options can change all this of course. Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-27[PATCH] Have x86_64 use add_active_range() and free_area_init_nodesMel Gorman
Size zones and holes in an architecture independent manner for x86_64. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Andi Kleen <ak@muc.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Keith Mannthey" <kmannth@gmail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] x86: Remove unneeded externs in acpi/boot.cAndi Kleen
And move one into proto.h Cc: len.brown@intel.com Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] Convert x86-64 to early paramAndi Kleen
Instead of hackish manual parsing Requires earlier i386 patchkit, but also fixes i386 early_printk again. I removed some obsolete really early parameters which didn't do anything useful. Also made a few parameters that needed it early (mostly oops printing setup) Also removed one panic check that wasn't visible without early console anyways (the early console is now initialized after that panic) This cleans up a lot of code. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] Move early chipset quirks out to new fileAndi Kleen
They did not really belong into io_apic.c. Move them into a new file and clean it up a bit. Also remove outdated ATI quirk that was obsolete, Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] Add initalization of the RDTSCP auxilliary valuesVojtech Pavlik
This patch adds initalization of the RDTSCP auxilliary values to CPU numbers to time.c. If RDTSCP is available, the MSRs are written with the respective values. It can be later used to initalize per-cpu timekeeping variables. AK: Some cleanups. Move externs into headers and fix CPU hotplug. Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andi Kleen <ak@suse.de>
2006-06-26[PATCH] x86_64: Calgary IOMMU - IOMMU abstractionsJon Mason
This patch creates a new interface for IOMMUs by adding a centralized location for IOMMU allocation (for translation tables/apertures) and IOMMU initialization. In creating these, code was moved around for abstraction, uniformity, and consiceness. Take note of the move of the iommu_setup bootarg parsing code to __setup. This is enabled by moving back the location of the aperture allocation/detection to mem init (which while ugly, was already the location of the swiotlb_init). While a slight departure from the previous patch, I belive this provides the true intention of the previous versions of the patch which changed this code. It also makes the addition of the upcoming calgary code much cleaner than previous patches. [AK: Removed one broken change. iommu_setup still has to be called early] Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] x86_64: Calgary IOMMU - introduce iommu_detectedJon Mason
swiotlb relies on the gart specific iommu_aperture variable to know if we discovered a hardware IOMMU before swiotlb initialization. Introduce iommu_detected to do the same thing, but in a HW IOMMU neutral manner, in preparation for adding the Calgary HW IOMMU. Signed-Off-By: Muli Ben-Yehuda <muli@il.ibm.com> Signed-Off-By: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] x86_64: reliable stack trace support (x86-64)Jan Beulich
These are the x86_64-specific pieces to enable reliable stack traces. The only restriction with this is that it currently cannot unwind across the interrupt->normal stack boundary, as that transition is lacking proper annotation. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] x86_64: Rename IOMMU option, fix help and mark option embedded.Andi Kleen
- Rename the GART_IOMMU option to IOMMU to make clear it's not just for AMD - Rewrite the help text to better emphatise this fact - Make it an embedded option because too many people get it wrong. To my astonishment I discovered the aacraid driver tests this symbol directly. This looks quite broken to me - it's an internal implementation detail of the PCI DMA API. Can the maintainer please clarify what this test was intended to do? Cc: linux-scsi@vger.kernel.org Cc: alan@redhat.com Cc: markh@osdl.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: Removed duplicated declaration of force_iommuAndi Kleen
Noticed by Andrew Morton. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] x86_64: remove dead do_softirq_thunkJan Beulich
Appearantly a left-over... Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] x86_64: Move the SMP time selection earlierAndi Kleen
SMP time selection originally ran after all CPUs were brought up because it needed to know the number of CPUs to decide if it needs an MP safe timer or not. This is not needed anymore because we know present CPUs early. This fixes a couple of problems: - apicmaintimer didn't always work because it relied on state that was set up time_init_gtod too late. - The output for the used timer in early kernel log was misleading because time_init_gtod could actually change it later. Now always print the final timer choice Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-26[PATCH] x86_64: Fix the additional_cpus=.. optionAndi Kleen
It didn't set up the CPU possible map early enough, so the option didn't actually work. Noticed by Heiko Carstens Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] x86_64: Disable tsc when apicpmtimer is activeAndi Kleen
Otherwise it has no effect anyways. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04[PATCH] x86_64: Calibrate APIC timer using PM timerAndi Kleen
On some broken motherboards (at least one NForce3 based AMD64 laptop) the PIT timer runs at a incorrect frequency. This patch adds a new option "apicpmtimer" that allows to use the APIC timer and calibrate it using the PMTimer. It requires the earlier patch that allows to run the main timer from the APIC. Specifying apicpmtimer implies apicmaintimer. The option defaults to off for now. I tested it on a few systems and the resulting APIC timer frequencies were usually a bit off, but always <1%, which should be tolerable. TBD figure out heuristic to enable this automatically on the affected systems TBD perhaps do it on all NForce3s or using DMI? Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04[PATCH] x86_64: [PATCH] timer resumeShaohua Li
At resume time, TSC's value or something similar might be changed a lot against suspend time. This could make system gets a very big lost ticks. See http://bugzilla.kernel.org/show_bug.cgi?id=5825 Signed-off-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04[PATCH] x86_64: Allow to run main time keeping from the local APIC interruptAndi Kleen
Another piece from the no-idle-tick patch. This can be enabled with the "apicmaintimer" option. This is mainly useful when the PIT/HPET interrupt is unreliable. Note there are some systems that are known to stop the APIC timer in C3. For those it will never work, but this case should be automatically detected. It also only works with PM timer right now. When HPET is used the way the main timer handler computes the delay doesn't work. It should be a bit more efficient because there is one less regular interrupt to process on the boot processor. Requires earlier bugfix from Venkatesh Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04[PATCH] x86_64: Define pmtmr_ioport to 0 when PM_TIMER is not availableAndi Kleen
Avoids some ifdef mess later. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] x86_64: Don't try to synchronize the TSC over CPUs on Intel CPUs at ↵Andi Kleen
boot. They already do this in hardware and the Linux algorithm actually adds errors. Cc: mingo@elte.hu Cc: rohit.seth@intel.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] x86_64: Fix compile error with !CONFIG_COMPATAndi Kleen
cpumask.h wasn't included implicitely into proto.h in this case. Just move it over to smp.h Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] x86_64: Use function pointers to call DMA mapping functionsMuli Ben-Yehuda
AK: I hacked Muli's original patch a lot and there were a lot of changes - all bugs are probably to blame on me now. There were also some changes in the fall back behaviour for swiotlb - in particular it doesn't try to use GFP_DMA now anymore. Also all DMA mapping operations use the same core dma_alloc_coherent code with proper fallbacks now. And various other changes and cleanups. Known problems: iommu=force swiotlb=force together breaks needs more testing. This patch cleans up x86_64's DMA mapping dispatching code. Right now we have three possible IOMMU types: AGP GART, swiotlb and nommu, and in the future we will also have Xen's x86_64 swiotlb and other HW IOMMUs for x86_64. In order to support all of them cleanly, this patch: - introduces a struct dma_mapping_ops with function pointers for each of the DMA mapping operations of gart (AMD HW IOMMU), swiotlb (software IOMMU) and nommu (no IOMMU). - gets rid of: if (swiotlb) return swiotlb_xxx(); - PCI_DMA_BUS_IS_PHYS is now checked against the dma_ops being set This makes swiotlb faster by avoiding double copying in some cases. Signed-Off-By: Muli Ben-Yehuda <mulix@mulix.org> Signed-Off-By: Jon D. Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Unmap NULL during early bootupSiddha, Suresh B
We should zap the low mappings, as soon as possible, so that we can catch kernel bugs more effectively. Previously early boot had NULL mapped and didn't trap on NULL references. This patch introduces boot_level4_pgt, which will always have low identity addresses mapped. Druing boot, all the processors will use this as their level4 pgt. On BP, we will switch to init_level4_pgt as soon as we enter C code and zap the low mappings as soon as we are done with the usage of identity low mapped addresses. On AP's we will zap the low mappings as soon as we jump to C code. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Add 4GB DMA32 zoneAndi Kleen
Add a new 4GB GFP_DMA32 zone between the GFP_DMA and GFP_NORMAL zones. As a bit of historical background: when the x86-64 port was originally designed we had some discussion if we should use a 16MB DMA zone like i386 or a 4GB DMA zone like IA64 or both. Both was ruled out at this point because it was in early 2.4 when VM is still quite shakey and had bad troubles even dealing with one DMA zone. We settled on the 16MB DMA zone mainly because we worried about older soundcards and the floppy. But this has always caused problems since then because device drivers had trouble getting enough DMA able memory. These days the VM works much better and the wide use of NUMA has proven it can deal with many zones successfully. So this patch adds both zones. This helps drivers who need a lot of memory below 4GB because their hardware is not accessing more (graphic drivers - proprietary and free ones, video frame buffer drivers, sound drivers etc.). Previously they could only use IOMMU+16MB GFP_DMA, which was not enough memory. Another common problem is that hardware who has full memory addressing for >4GB misses it for some control structures in memory (like transmit rings or other metadata). They tended to allocate memory in the 16MB GFP_DMA or the IOMMU/swiotlb then using pci_alloc_consistent, but that can tie up a lot of precious 16MB GFPDMA/IOMMU/swiotlb memory (even on AMD systems the IOMMU tends to be quite small) especially if you have many devices. With the new zone pci_alloc_consistent can just put this stuff into memory below 4GB which works better. One argument was still if the zone should be 4GB or 2GB. The main motivation for 2GB would be an unnamed not so unpopular hardware raid controller (mostly found in older machines from a particular four letter company) who has a strange 2GB restriction in firmware. But that one works ok with swiotlb/IOMMU anyways, so it doesn't really need GFP_DMA32. I chose 4GB to be compatible with IA64 and because it seems to be the most common restriction. The new zone is so far added only for x86-64. For other architectures who don't set up this new zone nothing changes. Architectures can set a compatibility define in Kconfig CONFIG_DMA_IS_DMA32 that will define GFP_DMA32 as GFP_DMA. Otherwise it's a nop because on 32bit architectures it's normally not needed because GFP_NORMAL (=0) is DMA able enough. One problem is still that GFP_DMA means different things on different architectures. e.g. some drivers used to have #ifdef ia64 use GFP_DMA (trusting it to be 4GB) #elif __x86_64__ (use other hacks like the swiotlb because 16MB is not enough) ... . This was quite ugly and is now obsolete. These should be now converted to use GFP_DMA32 unconditionally. I haven't done this yet. Or best only use pci_alloc_consistent/dma_alloc_coherent which will use GFP_DMA32 transparently. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Safe interrupts in oops_begin/endJan Beulich
Rather than blindly re-enabling interrupts in oops_end(), save their state in oope_begin() and then restore that state. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: Remove redundant max_mapnr and replace with end_pfnAndi Kleen
The FLATMEM people added it, but there doesn't seem a good reason because end_pfn is identical. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] i386/x86_64: make get_cpu_vendor() staticAdrian Bunk
get_cpu_vendor() no longer has any users in other files. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] MTRR suspend/resume cleanupShaohua Li
There has been some discuss about solving the SMP MTRR suspend/resume breakage, but I didn't find a patch for it. This is an intent for it. The basic idea is moving mtrr initializing into cpu_identify for all APs (so it works for cpu hotplug). For BP, restore_processor_state is responsible for restoring MTRR. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] x86_64: Add pmtimer supportAndi Kleen
There are unfortunately more and more multi processor Opteron systems which don't have HPET timer support in the southbridge. This covers in particular Nvidia and VIA chipsets. They also don't guarantee that the TSCs are synchronized between CPUs; and especially with MP powernow the systems are nearly unusable because the time gets very inconsistent between CPUs. The timer code for x86-64 was originally written under the assumption that we could fall back to the HPET timer on such systems. But this doesn't work there. Another alternative is to use the ACPI PM timer as primary time source. This patch does that. The kernel only uses PM timer when there is no other choice because it has some disadvantages. Ported over from i386. It should be faster than the i386 version because I dropped the "read three times" workaround, but is still considerable slower than HPET and also does not work together with vsyscalls which have to be disabled. Cc: <mark.langsdorf@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16[PATCH] x86_64: Switch SMP bootup over to new CPU hotplug state machineAndi Kleen
This will allow hotplug CPU in the future and in general cleans up a lot of crufty code. It also should plug some races that the old hackish way introduces. Remove one old race workaround in NMI watchdog setup that is not needed anymore. I removed the old total sum of bogomips reporting code. The brag value of BogoMips has been greatly devalued in the last years on the open market. Real CPU hotplug will need some more work, but the infrastructure for it is there now. One drawback: the new TSC sync algorithm is less accurate than before. The old way of zeroing TSCs is too intrusive to do later. Instead the TSC of the BP is duplicated now, which is less accurate. akpm: - sync_tsc_bp_init seems to have the sense of `init' inverted. - SPIN_LOCK_UNLOCKED is deprecated - use DEFINE_SPINLOCK. Cc: <rusty@rustcorp.com.au> Cc: <mingo@elte.hu> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16[PATCH] x86_64: Use a VMA for the 32bit vsyscallAndi Kleen
Use a real VMA to map the 32bit vsyscall page This interacts better with Hugh's upcomming VMA walk optimization Also removes some ugly special cases. Code roughly modelled after the ppc64 vdso version from Ben Herrenschmidt. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!