aboutsummaryrefslogtreecommitdiff
path: root/include/drm
AgeCommit message (Collapse)Author
2009-11-18drm/kms: add page flipping ioctlKristian Høgsberg
This adds a page flipping ioctl to the KMS API. The ioctl takes an fb ID and a ctrc ID and flips the crtc to the given fb at the next vblank. The ioctl returns immediately but the flip doesn't happen until after any rendering that's currently queued up against the new framebuffer is done. After submitting a page flip, any execbuffer involving the old front buffer will block until the flip is completed. Optionally, a vblank event can be generated when the swap eventually happens. Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18drm: kill more unused DRM macrosAndres Salomon
There are a few more macros in drmP.h that are unused; DRM_GET_PRIV_SAREA, DRM_ARRAY_SIZE, and DRM_WAITCOUNT can go away completely. Unfortunately, DRM_COPY is still used in one place, but we can at least move it to where it's used. It's an awful looking macro.. [akpm: fix overeagerness] Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18drm: kill some unused DRM_PROC macros from drmP.hAndres Salomon
i915_gem_proc.c appears to have been the last user of the DRM_PROC_* macros, and it has gone away. The macros should die as well. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18drm: Add async event synchronization for drmWaitVblankKristian Høgsberg
This patch adds a new flag to the drmWaitVblank ioctl, which asks the drm to return immediately and notify userspace when the specified vblank sequence happens by sending an event back on the drm fd. The event mechanism works with the other flags supported by the ioctls, specifically, the vblank sequence can be specified relatively or absolutely, and works for primary and seconday crtc. The signal field of the vblank request is used to provide user data, which will be sent back to user space in the vblank event. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-05Merge remote branch 'airlied/drm-next' into drm-intel-nextEric Anholt
2009-11-05drm/i915: implement drmmode overlay support v4Daniel Vetter
This implements intel overlay support for kms via a device-specific ioctl. Thomas Hellstrom brought up the idea of a general ioctl (on dri-devel). We've reached the conclusion that such an infrastructure only makes sense when multiple kms overlay implementations exists, which atm don't (and it doesn't look like this is gonna change). Open issues: - Runs in sync with the gpu, i.e. unnecessary waiting. I've decided to wait on this because the hw tends to hang when changing something in this area. I left some dummy functions as infrastructure. - polyphase filtering uses a static table. - uses uninterruptible sleeps. Unfortunately the alternatives may unnecessarily wedged the hw if/when we timeout too early (and userspace only overloaded the batch buffers with stuff worth a few secs of gpu time). Changes since v1: - fix off-by-one misconception on my side. This fixes fullscreen playback. Changes since v2: - add underrun detection as spec'ed for i965. - flush caches properly, fixing visual corruptions. Changes since v4: - fix up cache flushing of overlay memory regs. - killed require_pipe_a logic - it hangs the chip. Tested-By: diego.abelenda@gmail.com (on a 865G) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [anholt: Resolved against the MADVISE ioctl going in before this one] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05drm/i915: add i915_lp_ring_sync helperDaniel Vetter
This just waits until the hw passed the current ring position with cmd execution. This slightly changes the existing i915_wait_request function to make uninterruptible waiting possible - no point in returning to userspace while mucking around with the overlay, that piece of hw is just too fragile. Also replace a magic 0 with the symbolic constant (and kill the then superflous comment) while I was looking at the code. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05drm: make drm_mode_object_find typesafeDaniel Vetter
I've wasted half a day hunting a bug that could easily be spotted by gcc. Prevent this from reoccurring. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-10-26drm: Add async event synchronization for drmWaitVblankKristian Høgsberg
This patch adds a new flag to the drmWaitVblank ioctl, which asks the drm to return immediately and notify userspace when the specified vblank sequence happens by sending an event back on the drm fd. The event mechanism works with the other flags supported by the ioctls, specifically, the vblank sequence can be specified relatively or absolutely, and works for primary and seconday crtc. The signal field of the vblank request is used to provide user data, which will be sent back to user space in the vblank event. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-08Merge branch 'drm-next' of ../drm-next into drm-linusDave Airlie
conflict in radeon since new init path merged with vga arb code. Conflicts: drivers/gpu/drm/radeon/radeon.h drivers/gpu/drm/radeon/radeon_asic.h drivers/gpu/drm/radeon/radeon_device.c
2009-10-06drm/fb: add more correct 8/16/24/32 bpp fb support.Dave Airlie
The previous patches had some unwanted side effects, I've fixed the lack of 32bpp working, and fixed up 16bpp so it should also work. this also adds the interface to allow the driver to set a preferred console depth so for example low memory rn50 can set it to 8bpp. It also catches 24bpp on cards that can't do it and forces 32bpp. Tested on r100/r600/i945. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05drm/fb: add setcmap and fix 8-bit support.Dave Airlie
This adds support for the setcmap api and fixes the 8bpp support at least on radeon hardware. It adds a new load_lut hook which can be called once the color map is setup. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05drm/radeon/kms: respect single crtc cards, only create one crtc. (v2)Dave Airlie
Also add single crtc for RN50 chips. changes in v2: fix vblank init to respect single crtc flag fix r100 mode bandwidth to respect single crtc flag Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-30Merge branch 'drm-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (25 commits) drm/radeon/kms: Convert R520 to new init path and associated cleanup drm/radeon/kms: Convert RV515 to new init path and associated cleanup drm: fix radeon DRM warnings when !CONFIG_DEBUG_FS drm: fix drm_fb_helper warning when !CONFIG_MAGIC_SYSRQ drm/r600: fix memory leak introduced with 64k malloc avoidance fix. drm/kms: make fb helper work for all drivers. drm/radeon/r600: fix offset handling in CS parser drm/radeon/kms/r600: fix forcing pci mode on agp cards drm/radeon/kms: fix for the extra pages copying. drm/radeon/kms/r600: add support for vline relocs drm/radeon/kms: fix some bugs in vline reloc drm/radeon/kms/r600: clamp vram to aperture size drm/kms: protect against fb helper not being created. drm/r600: get values from the passed in IB not the copy. drm: create gitignore file for radeon drm/radeon/kms: remove unneeded master create/destroy functions. drm/kms: start adding command line interface using fb. fb: change rules for global rules match. drm/radeon/kms: don't require up to 64k allocations. (v2) drm/radeon/kms: enable dac load detection by default. ... Trivial conflicts in drivers/gpu/drm/radeon/radeon_asic.h due to adding '->vga_set_state' function pointers.
2009-09-28drm/kms: make fb helper work for all drivers.Dave Airlie
This initialises the fb helper with the connector helper, so that the fb cmdline code works for intel as well. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25drm/kms: start adding command line interface using fb.Dave Airlie
[note this requires an fb patch posted to linux-fbdev-devel already] This uses the normal video= command line option to control the kms output setup at boot time. It is used to override the autodetection done by kms. video= normally takes a framebuffer as the first parameter, in kms it will take a connector name, DVI-I-1, or LVDS-1 etc. If no output connector is specified the mode string will apply to all connectors. The mode specification used will match down the probed modes, and if no mode is found it will add a CVT mode that matches. video=1024x768 - all connectors match a 1024x768 mode or add a CVT on video=VGA-1:1024x768, VGA-1 connector gets mode only. The same strings as used in current fb modedb.c are used, except I've added three more letters, e, D, d, e = enable, D = enable Digital, d = disable, which allow a connector to be forced into a certain state. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-24Merge branch 'drm-intel-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (57 commits) drm/i915: Handle ERESTARTSYS during page fault drm/i915: Warn before mmaping a purgeable buffer. drm/i915: Track purged state. drm/i915: Remove eviction debug spam drm/i915: Immediately discard any backing storage for uneeded objects drm/i915: Do not mis-classify clean objects as purgeable drm/i915: Whitespace correction for madv drm/i915: BUG_ON page refleak during unbind drm/i915: Search harder for a reusable object drm/i915: Clean up evict from list. drm/i915: Add tracepoints drm/i915: framebuffer compression for GM45+ drm/i915: split display functions by chip type drm/i915: Skip the sanity checks if the current relocation is valid drm/i915: Check that the relocation points to within the target drm/i915: correct FBC update when pipe base update occurs drm/i915: blacklist Acer AspireOne lid status ACPI: make ACPI button funcs no-ops if not built in drm/i915: prevent FIFO calculation overflows on 32 bits with high dotclocks drm/i915: intel_display.c handle latency variable efficiently ... Fix up trivial conflicts in drivers/gpu/drm/i915/{i915_dma.c|i915_drv.h}
2009-09-23drm/i915: Track purged state.Chris Wilson
In order to correctly prevent the invalid reuse of a purged buffer, we need to track such events and warn the user before something bad happens. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2009-09-21Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits) drm/vgaarb: add VGA arbitration support to the drm and kms. drm/radeon: some r420s have a CP race with the DMA engine. drm/radeon/r600/kms: rv670 is not DCE3 drm/radeon/kms: r420 idle after programming GA_ENHANCE drm/radeon/kms: more fixes to rv770 suspend/resume path. drm/radeon/kms: more alignment for rv770.c with r600.c drm/radeon/kms: rv770 blit init called too late. drm/radeon/kms: move around new init path code to avoid posting at init drm/radeon/r600: fix some issues with suspend/resume. drm/radeon/kms: disable VGA rendering engine before taking over VRAM drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init(). drm/radeon/kms: add initial connector properties drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian. drm/radeon/kms: don't fail if we fail to init GPU acceleration drm/r600/kms: fixup number of loops per blit calculation. drm/radeon/kms: reprogram format in set base. drm/radeon: avivo chips have no separate int bit for display drm/radeon/r600: don't do interrupts drm: fix _DRM_GEM addmap error message drm: update crtc x/y when only fb changes ... Fixed up trivial conflicts in firmware/Makefile due to network driver (cxgb3) and drm (mga/r128/radeon) firmware being listed next to each other.
2009-09-21drm/vgaarb: add VGA arbitration support to the drm and kms.Dave Airlie
VGA arb requires DRM support for non-kms drivers, to turn on/off irqs when disabling the mem/io regions. VGA arb requires KMS support for GPUs where we can turn off VGA decoding. Currently we know how to do this for intel and radeon kms drivers, which allows them to be removed from the arbiter. This patch comes from Fedora rawhide kernel. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-20includecheck fix: include/drm, drm_memory.hJaswinder Singh Rajput
fix the following 'make includecheck' warning: include/drm/drm_memory.h: linux/vmalloc.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247068169.4382.99.camel@ht.satnam> Acked-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.Michel Dänzer
Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/kms: don't fail if we fail to init GPU accelerationJerome Glisse
Userspace can query if acceleration is working or not true get info ioctl and could fallback to software if for some reason kernel failed to initialize KMS. This should allow to give a working KMS setup in all case (even with non functionning accel). Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-17drm/i915: Add ioctl to set 'purgeability' of objectsChris Wilson
Similar to the madvise() concept, the application may wish to mark some data as volatile. That is in the event of memory pressure the kernel is free to discard such buffers safe in the knowledge that the application can recreate them on demand, and is simply using these as a cache. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-08drm/i915: add B43 chipset supportFabian Henze
Signed-off-by: Fabian Henze <hoacha@quantentunnel.de> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-08drm: include seq_file.h for debugfs builds.Dave Airlie
Fixes a warning seen on powerpc. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07Merge intel drm-intel-next branchDave Airlie
Merge remote branch 'anholt/drm-intel-next' of ../anholt-2.6 into drm-next Conflicts: drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_drv.h drivers/gpu/drm/i915/intel_sdvo.c
2009-09-07drm/kms: add a function that can add the mode for the output device without EDIDZhao Yakui
Add a function that can be used to add the default mode for the output device without EDID. It will add the default mode that meets with the requirements of given hdisplay/vdisplay limit. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-02drm/kms: add explicit encoder disable function and detach harder.Dave Airlie
For shared tv-out and VGA encoders, we really need to know if the encoder is just being switched off temporarily in blanking or if we are really disabling it hard. Also we need to try harder to disconnect encoders from unused connectors so we can share more efficently. (shared encoders stuff is coming in radeon tv-out support) Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-02drm/mm: add ability to dump mm lists via debugfsDave Airlie
This adds code to the drm_mm to talk to debugfs, and adds support to radeon to add the VRAM and GTT mm lists to debugfs. I tested with spinlock debugging and it doesn't give out. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm/kms: move driver specific fb common code to helper functions (v2)Dave Airlie
Initially I always meant this code to be shared, but things ran away from me before I got to it. This refactors the i915 and radeon kms fbdev interaction layers out into generic helpers + driver specific pieces. It moves all the panic/sysrq enhancements to the core file, and stores a linked list of kernel fbs. This could possibly be improved to only store the fb which has fbcon on it for panics etc. radeon retains some specific codes used for a big endian workaround. changes: fix oops in v1 fix freeing path for crtc_info Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm/crtc_helper: place drm_helper_encoder_in_use() in the header fileMaarten Maathuis
- The symbol was already exported. Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27drm: GEM handles are u32, not intPekka Paalanen
Several functions in the GEM kernel API used int as handle type, but user API has it __u32 which is also the intended type. Replace int with u32. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27drm/ttm: consolidate cache flushing code in one place.Dave Airlie
This merges the TTM and drm cache flushing into one file in the drm core. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21drm/radeon: add GET_PARAM/INFO support for Z pipesAlex Deucher
Needed for occlusion queries on rv530 chips. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21drm/radeon/kms: implement the bo busy ioctl properly.Dave Airlie
The previous patch assumes the ioctl already existed, when it actually didn't. It also didn't return the correct error code. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-20Merge Linus master to drm-nextDave Airlie
linux-next conflict reported needed resolution. Conflicts: drivers/gpu/drm/drm_crtc.c drivers/gpu/drm/drm_edid.c drivers/gpu/drm/i915/intel_sdvo.c drivers/gpu/drm/radeon/radeon_ttm.c drivers/gpu/drm/ttm/ttm_bo.c
2009-08-19ttm: Make parts of a struct ttm_bo_device global.Thomas Hellstrom
Common resources, like memory accounting and swap lists should be global and not per device. Introduce a struct ttm_bo_global to accomodate this, and register it with sysfs. Add a small sysfs interface to return the number of active buffer objects. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19drm/ttm: Memory accounting rework.Thomas Hellstrom
Use inclusive zones to simplify accounting and its sysfs representation. Use DMA32 accounting where applicable. Add a sysfs interface to make the heuristically determined limits readable and configurable. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19drm: Enable drm drivers to add drm sysfs devices.Thomas Hellstrom
Export utility functions for drivers to add specialized devices in the sysfs drm class subdirectory. Initially this will be needed form TTM to add a virtual device that handles power management. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19drm/ttm: optimize bo_kmap_type valuesPekka Paalanen
A micro-optimization on the function ttm_kmap_obj_virtual(). By defining the values of enum ttm_bo_kmap_obj::bo_kmap_type to have a bit indicating iomem, size of the function ttm_kmap_obj_virtual() will be reduced by 16 bytes on x86_64 (gcc 4.1.2). ttm_kmap_obj_virtual() may be heavily used, when buffer objects are accessed via wrappers, that work for both kinds of memory addresses: iomem cookies and kernel virtual. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm/kms: no need to return void value (encoder)Pekka Paalanen
Cc: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm: clarify scaling property namesJesse Barnes
Now that we're using the scaling property in the Intel driver I noticed that the names were a bit confusing. I've corrected them according to our discussion on IRC and the mailing list, though I've left out potential new additions for a new scaling property with an integer (or two) for the scaling factor. None of the drivers implement that today, but if someone wants to do it, I think it could be done with the addition of a single new type and a new property to describe the scaling factor in the X and Y directions. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm: fixup includes in encoder slave header files.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-17drm/radeon/kms: implement bo busy check + current domainDave Airlie
This implements the busy ioctl along with a current domain check. returns 0 or -EBUSY puts the current domain no matter what the answer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-13drm: Add more standard TV properties.Francisco Jerez
Overscan, saturation, hue. Used in the nouveau driver for GPUs with integrated TV encoders. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-05drm/radeon: Add support for RS880 chipsAlex Deucher
These are new AMD IGP chips Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04drm: Define some new standard TV properties.Francisco Jerez
Namely "brightness", "contrast" and "flicker reduction". Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04drm: Define DRM_MODE_SUBCONNECTOR_SCARTFrancisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04drm: Define DRM_MODE_CONNECTOR_TVFrancisco Jerez
The existing TV connector types are often unsuitable either because there is no way to probe them until they're actually plugged in or because they can change during run time (e.g. 7-pin DIN connectors that behave as S-Video, Component, Composite or SCART depending on the adaptor plugged in). Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>