aboutsummaryrefslogtreecommitdiff
path: root/include/linux/ide.h
AgeCommit message (Collapse)Author
2009-03-24ide: use try_to_identify() in ide_driveid_update()Bartlomiej Zolnierkiewicz
* Pass pointer to buffer for IDENTIFY data to do_identify() and try_to_identify(). * Un-static try_to_identify() and use it in ide_driveid_update(). * Rename try_to_identify() to ide_dev_read_id(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24mn10300: remove <asm/ide.h>Bartlomiej Zolnierkiewicz
* Remove superfluous <asm/intctl-regs.h> include. * Remove no longer used SUPPORT_SLOW_DATA_PORTS define. * Move defining SUPPORT_VLB_SYNC to <linux/ide.h>. * Use __ide_mm_*() macros from <asm-generic/ide_iops.h> (MN10300 uses only memory-mapped I/O). * Remove <asm/ide.h>. While at it: * Remove superfluous SPARC64 #ifdef from <linux/ide.h>. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24frv: remove <asm/ide.h>Bartlomiej Zolnierkiewicz
* Remove superfluous <asm/{setup,io,irq}.h> includes. * Remove <asm/ide.h>. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: remove pciirq argument from ide_pci_setup_ports()Bartlomiej Zolnierkiewicz
* Set ->irq explicitly in cs5520.c. * Remove irq argument from ide_hw_configure(). * Remove pciirq argument from ide_pci_setup_ports(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: fix ->init_chipset method to return 'int' valueBartlomiej Zolnierkiewicz
* Return 0 instead of dev->irq in ->init_chipset implementations. * Fix ->init_chipset method to return 'int' value instead of 'unsigned int' one. This fixes ->init_chipset handling for host drivers (cs5530, hpt366 and pdc202xx_new) for which it is possible for this method to fail. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: remove no longer needed IRQ fallback code from hwif_init()Bartlomiej Zolnierkiewicz
Then remove no longer used __ide_default_irq(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: remove no longer needed IDE_HFLAG[_FORCE]_LEGACY_IRQSBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move error handling code to ide-eh.c (v2)Bartlomiej Zolnierkiewicz
Do some CodingStyle fixups in <linux/ide.h> while at it. v2: Add missing <linux/delay.h> include (reported by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move xfer mode tuning code to ide-xfer-mode.cBartlomiej Zolnierkiewicz
* Move xfer mode tuning code to ide-xfer-mode.c. * Add CONFIG_IDE_XFER_MODE config option to be selected by host drivers that support xfer mode tuning. * Add CONFIG_IDE_XFER_MODE=n static inline versions of ide_set_pio() and ide_set_xfer_rate(). * Make IDE_TIMINGS and BLK_DEV_IDEDMA config options select IDE_XFER_MODE, also add explicit selects for few host drivers that need it. * Build/link ide-xfer-mode.o and ide-pio-blacklist.o (it is needed only by ide-xfer-mode.o) only if CONFIG_IDE_XFER_MODE=y. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move device settings code to ide-devsets.cBartlomiej Zolnierkiewicz
Remove stale comment from ide.c while at it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move ide_do_park_unpark() to ide-park.cBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: remove ide_do_drive_cmd()Bartlomiej Zolnierkiewicz
* Use elv_add_request() instead of __elv_add_request() in ide_do_drive_cmd(). * ide_do_drive_cmd() is used only in ide-{atapi,cd}.c so inline it there. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move ide_dma_timeout_retry() to ide-dma.cBartlomiej Zolnierkiewicz
Move ide_dma_timeout_retry() to ide-dma.c and add static inline version for CONFIG_BLK_DEV_IDEDMA=n. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move drive_is_ready() to ide-io.cBartlomiej Zolnierkiewicz
Move drive_is_ready() to ide-io.c, then make it static. Also make some minor CodingStyle fixups while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: sanitize ACPI initializationBartlomiej Zolnierkiewicz
* ide_acpi_init() -> ide_acpi_init_port() * ide_acpi_blacklist() -> ide_acpi_init() * Call ide_acpi_init() only once (do it during IDE core initialization) and cleanup the function accordingly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: add ide_for_each_present_dev() iteratorBartlomiej Zolnierkiewicz
* Add ide_for_each_present_dev() iterator and convert IDE code to use it. * Do some drive-by CodingStyle fixups in ide-acpi.c while at it. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move ide_pktcmd_tf_load() to ide-atapi.cBartlomiej Zolnierkiewicz
Then make it static and remove 'dma' argument. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-13ide: save the returned value of dma_map_sgFUJITA Tomonori
dma_map_sg could return a value different to 'nents' argument of dma_map_sg so the ide stack needs to save it for the later usage (e.g. for_each_sg). The ide stack also needs to save the original sg_nents value for pci_unmap_sg. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> [bart: backport to Linus' tree] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-05ide: allow to wrap interrupt handlerStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Andrew Victor <linux@maxim.org.za> [bart: minor checkpatch.pl / CodingStyle fixups] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25ide: fix refcounting in device driversBartlomiej Zolnierkiewicz
During host driver module removal del_gendisk() results in a final put on drive->gendev and freeing the drive by drive_release_dev(). Convert device drivers from using struct kref to use struct device so device driver's object holds reference on ->gendev and prevents drive from prematurely going away. Also fix ->remove methods to not erroneously drop reference on a host driver by using only put_device() instead of ide*_put(). Reported-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14IDE: fix sparse signed-ness errors with host->host_busyBen Dooks
The host_busy field in struct ide_host defaults to a signed-long, where most arch's test_and_set_bit_* macros use an unsigned long. Change to using an unsigned long, which on ARM removes the following sparse errors: drivers/ide/ide-io.c:681:8: warning: incorrect type in argument 2 (different signedness) drivers/ide/ide-io.c:681:8: expected unsigned long volatile *p drivers/ide/ide-io.c:681:8: got long volatile *<noident> drivers/ide/ide-io.c:681:8: warning: incorrect type in argument 2 (different signedness) drivers/ide/ide-io.c:681:8: expected unsigned long volatile *p drivers/ide/ide-io.c:681:8: got long volatile *<noident> drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness) drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p drivers/ide/ide-io.c:695:3: got long volatile *<noident> drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness) drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p drivers/ide/ide-io.c:695:3: got long volatile *<noident> drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness) drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p drivers/ide/ide-io.c:695:3: got long volatile *<noident> drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness) drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p drivers/ide/ide-io.c:695:3: got long volatile *<noident> drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness) drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p drivers/ide/ide-io.c:695:3: got long volatile *<noident> drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness) drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p drivers/ide/ide-io.c:695:3: got long volatile *<noident> drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness) drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p drivers/ide/ide-io.c:695:3: got long volatile *<noident> drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness) drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p drivers/ide/ide-io.c:695:3: got long volatile *<noident> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: move read_sff_dma_status() method to 'struct ide_dma_ops'Sergei Shtylyov
Move apparently misplaced read_sff_dma_status() method from 'struct ide_tp_ops' to 'struct ide_dma_ops', renaming it to dma_sff_read_status() and making only required for SFF-8038i compatible IDE controller drivers (greatly cutting down the number of initializers) as its only user (outside ide-dma-sff.c and such drivers) appears to be ide_pci_check_simplex() which is only called for such controllers... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove unused ide_hwif_t.sg_mapped fieldBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: struct ide_atapi_pc - remove unused fields and update documentationBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide-cd: convert to ide-atapi facilitiesBorislav Petkov
... and remove no longer needed cdrom_start_packet_command and cdrom_transfer_packet_command. Tested lightly with ide-cd and ide-floppy. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: add port and host iteratorsBartlomiej Zolnierkiewicz
Add ide_port_for_each_dev() / ide_host_for_each_port() iterators and update IDE code to use them. While at it: - s/unit/i/ variable in ide_port_wait_ready(), ide_probe_port(), ide_port_tune_devices(), ide_port_init_devices_data(), do_reset1(), ide_acpi_set_state() and scc_dma_end() - s/d/i/ variable in ide_proc_port_register_devices() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: dynamic allocation of device structuresBartlomiej Zolnierkiewicz
Allocate device structures dynamically instead of having them embedded in ide_hwif_t: * Remove needless zeroing of port structure from ide_init_port_data(). * Add ide_hwif_t.devices[MAX_DRIVES] (table of pointers to the devices). * Add ide_port_{alloc,free}_devices() helpers and use them respectively in ide_{host,free}_alloc(). * Convert all users of ->drives[] to use ->devices[] instead. While at it: * Use drive->dn for the slave device check in scc_pata.c. As a nice side-effect this patch cuts ~1kB (x86-32) from the resulting code size: text data bss dec hex filename 53963 1244 237 55444 d894 drivers/ide/ide-core.o.before 52981 1244 237 54462 d4be drivers/ide/ide-core.o.after Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove ->error method from struct ide_driverBartlomiej Zolnierkiewicz
* Remove (now superfluous) ->error method from struct ide_driver. * Unexport __ide_error() and make it static. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove ide_driver_t typedefBartlomiej Zolnierkiewicz
While at it: - s/struct ide_driver_s/struct ide_driver/ - use to_ide_driver() macro in ide-proc.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove 'byte' typedefBartlomiej Zolnierkiewicz
Just use u8 instead, also s/__u8/u8/ in ide-cd.h while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove ide_pci_enablebit_t typedefBartlomiej Zolnierkiewicz
Remove needless parens while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove local_irq_set() macroBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove HWIF() macroBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: move ide_init_port_data() and friends to ide-probe.cBartlomiej Zolnierkiewicz
* Move IDE_DEFAULT_MAX_FAILURES to <linux/ide.h>. * Move ide_cfg_mtx, ide_hwif_to_major[], ide_port_init_devices_data(), ide_init_port_data(), ide_init_port_hw() and ide_unregister() to ide-probe.c from ide.c. * Make ide_unregister(), ide_init_port_data(), ide_init_port_hw() and ide_cfg_mtx static. While at it: * Remove stale ide_init_port_data() documentation and ide_lock extern. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: merge ide_hwgroup_t with ide_hwif_t (v2)Bartlomiej Zolnierkiewicz
* Merge ide_hwgroup_t with ide_hwif_t. * Cleanup init_irq() accordingly, then remove no longer needed ide_remove_port_from_hwgroup() and ide_ports[]. * Remove now unused HWGROUP() macro. While at it: * ide_dump_ata_error() fixups v2: * Fix ->quirk_list check in do_ide_request() (s/hwif->cur_dev/prev_port->cur_dev). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: use lock bitops for ports serialization (v2)Bartlomiej Zolnierkiewicz
* Add ->host_busy field to struct ide_host and use it's first bit together with lock bitops to provide new ports serialization method. * Convert core IDE code to use new ide_[un]lock_host() helpers. This removes the need for taking hwgroup->lock if host is already busy on serialized hosts and makes it possible to merge ide_hwgroup_t into ide_hwif_t (done in the later patch). * Remove no longer needed ide_hwgroup_t.busy and ide_[un]lock_hwgroup(). * Update do_ide_request() documentation. v2: * ide_release_lock() should be called inside IDE_HFLAG_SERIALIZE check. * Add ide_hwif_t.busy flag and ide_[un]lock_port() for serializing devices on a port. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove hwgroup->hwif and {drive,hwif}->nextBartlomiej Zolnierkiewicz
* Add 'int port_count' field to ide_hwgroup_t to keep the track of the number of ports in the hwgroup. Then update init_irq() and ide_remove_port_from_hwgroup() to use it. * Remove no longer needed hwgroup->hwif, {drive,hwif}->next, ide_add_drive_to_hwgroup() and ide_remove_drive_from_hwgroup() (hwgroup->drive now only denotes the currently active device in the hwgroup). * Update locking documentation in <linux/ide.h>. While at it: * Rename ->drive field in ide_hwgroup_t to ->cur_dev. * Use __func__ in ide_timer_expiry(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: use per-port IRQ handlersBartlomiej Zolnierkiewicz
Use hwif instead of hwgroup as {request,free}_irq()'s cookie, teach ide_intr() to return early for non-active serialized ports, modify unexpected_intr() accordingly and then use per-port IRQ handlers instead of per-hwgroup ones. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: add ->cur_port to struct ide_host and use it for serialized hostsBartlomiej Zolnierkiewicz
* Pass 'ide_hwif_t *' instead of 'ide_hwgroup_t *' to unexpected_intr(). * Cache pointer to the port currently being serviced in ->cur_port and use it instead of hwif->hwgroup on serialized hosts. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-atapi: remove timeout arg to ide_issue_pcBorislav Petkov
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide: remove the last ide-scsi remnantsBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-atapi: remove ide-scsi remnants from ide_pc_intr()Borislav Petkov
As a result, remove now unused ide_scsi_get_timeout and ide_scsi_expiry. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-cd: move cdrom_timer_expiry to ide-atapi.cBorislav Petkov
- cdrom_timer_expiry -> ide_cd_expiry - remove expiry-arg to ide_issue_pc as it is redundant now - ide_debug_log -> debug_log Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-atapi: accomodate transfer length calculation for ide-cdBorislav Petkov
... by factoring it out of ide_cd_do_request() into a helper, as suggested by Bart. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> [bart: BLK_DEV_IDECD needs to select IDE_ATAPI now] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide: make IDE_AFLAG_.. numbering continuous againBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide: use per-device request queue locks (v2)Bartlomiej Zolnierkiewicz
* Move hack for flush requests from choose_drive() to do_ide_request(). * Add ide_plug_device() helper and convert core IDE code from using per-hwgroup lock as a request lock to use the ->queue_lock instead. * Remove no longer needed: - choose_drive() function - WAKEUP() macro - 'sleeping' flag from ide_hwif_t - 'service_{start,time}' fields from ide_drive_t This patch results in much simpler and more maintainable code (besides being a scalability improvement). v2: * Fixes/improvements based on review from Elias: - take as many requests off the queue as possible - remove now redundant BUG_ON() Cc: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide: add ide_[un]lock_hwgroup() helpersBartlomiej Zolnierkiewicz
Add ide_[un]lock_hwgroup() inline helpers for obtaining exclusive access to the given hwgroup and update the core code accordingly. [ This change besides making code saner results in more efficient use of ide_{get,release}_lock(). ] Cc: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide: don't execute the next queued command from the hard-IRQ context (v2)Bartlomiej Zolnierkiewicz
* Tell the block layer that we are not done handling requests by using blk_plug_device() in ide_do_request() (request handling function) and ide_timer_expiry() (timeout handler) if the queue is not empty. * Remove optimization which directly calls ide_do_request() for the next queued command from the ide_intr() (IRQ handler) and ide_timer_expiry(). * Remove no longer needed IRQ masking from ide_do_request() - in case of IDE ports needing serialization disable_irq_nosync()/enable_irq() was used for the (possibly shared) IRQ of the other IDE port. * Put the misplaced comment in the right place in ide_do_request(). * Drop no longer needed 'int masked_irq' argument from ide_do_request(). * Merge ide_do_request() into do_ide_request(). * Remove no longer needed IDE_NO_IRQ define. While at it: * Don't use HWGROUP() macro in do_ide_request(). * Use __func__ in ide_intr(). This patch reduces IRQ hadling latency for IDE and improves the system-wide handling of shared IRQs (which should result in more timeout resistant and stable IDE systems). It also makes it possible to do some further changes later (i.e. replace some busy-waiting delays with sleeping equivalents). v2: Changes per review from Elias Oltmanns: - fix wrong goto statement in 'if (startstop == ide_stopped)' block - use spin_unlock_irq() - don't use obsolete HWIF() macro Cc: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide: move sysfs support to ide-sysfs.cBartlomiej Zolnierkiewicz
While at it: - media_string() -> ide_media_string() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: move Power Management support to ide-pm.cBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 02:48:32 +0000