aboutsummaryrefslogtreecommitdiff
path: root/include/linux/libata.h
AgeCommit message (Collapse)Author
2006-03-29[PATCH] libata: Simplex and other mode filtering logicAlan Cox
Add a field to the host_set called 'flags' (was host_set_flags changed to suit Jeff) Add a simplex_claimed field so we can remember who owns the DMA channel Add a ->mode_filter() hook to allow drivers to filter modes Add docs for mode_filter and set_mode Filter according to simplex state Filter cable in core This provides the needed framework to support all the mode rules found in the PATA world. The simplex filter deals with 'to spec' simplex DMA systems found in older chips. The cable filter avoids duplicating the same rules in each chip driver with PATA. Finally the mode filter is neccessary because drive/chip combinations have errata that forbid certain modes with some drives or types of ATA object. Drive speed setup remains per channel for now and the filters now use the framework Tejun put into place which cleans them up a lot from the older libata-pata patches. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29[PATCH] libata: Add ->set_mode hook for odd driversAlan Cox
Some hardware doesn't want the usual mode setup logic running. This allows the hardware driver to replace it for special cases in the least invasive way possible. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29[PATCH] libata: BMDMA handling updatesAlan Cox
This is the minimal patch set to enable the current code to be used with a controller following SFF (ie any PATA and early SATA controllers) safely without crashes if there is no BMDMA area or if BMDMA is not assigned by the BIOS for some reason. Simplex status is recorded but not acted upon in this change, this isn't a problem with the current drivers as none of them are for simplex hardware. A following diff will deal with that. The flags in the probe structure remain ->host_set_flags although Jeff asked me to rename them, simply because the rename would break the usual Linux rules that old code should break when there are changes. not compile and run and then blow up/eat your computer/etc. Renaming this later is a trivial exercise once a better name is chosen. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: kill E.D.D.Tejun Heo
E.D.D. has no user in-tree and mostly useless. Kill it. For possible out-of-tree users, add a nice warning message and error handling if LLDD doesn't report any useable reset mechanism (and thus tries to use E.D.D.). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: Remove dependence on host_set->dev for SASBrian King
Remove some of the dependence on the host_set struct in preparation for supporting SAS HBAs. Adds a struct device pointer to the ata_port struct. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: add ata_dev_pair helperAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] Make libata not powerdown drivers on PM_EVENT_FREEZE.Nigel Cunningham
At the moment libata doesn't pass pm_message_t down ata_device_suspend. This causes drives to be powered down when we just want a freeze, causing unnecessary wear and tear. This patch gets pm_message_t passed down so that it can be used to determine whether to power down the drive. Signed-off-by: Nigel Cunningham <nigel@suspend2.net> drivers/scsi/libata-core.c | 5 +++-- drivers/scsi/libata-scsi.c | 4 ++-- drivers/scsi/scsi_sysfs.c | 2 +- include/linux/libata.h | 4 ++-- include/scsi/scsi_host.h | 2 +- 5 files changed, 9 insertions(+), 8 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: add per-dev pio/mwdma/udma_maskTejun Heo
Add per-dev pio/mwdma/udma_mask. All transfer mode limits used to be applied to ap->*_mask which unnecessarily restricted other devices sharing the port. This change will also benefit later EH speed down and hotplug. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22Merge branch 'master'Jeff Garzik
2006-03-21[libata] add prototypes for helpersJeff Garzik
Add prototypes for stuff recently added by Alan.
2006-03-21[PATCH] libata: Add some dummy noop functionsBrian King
Add some dummy noop functions for use by libata clients that do not need to do anything. Future SAS patches will utilize these functions. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21[SCSI] libata: implement minimal transport template for ->eh_timed_outTejun Heo
SCSI midlayer has moved hostt->eh_timed_out to transport template. As libata doesn't need full-blown transport support yet, implement minimal transport for libata. No transport class or whatsoever, just empty transport template with ->eh_timed_out hook. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-11[PATCH] libata: improve xfer mask constants and update ata_mode_string()Tejun Heo
Add ATA_BITS_*, ATA_MASK_* macros and reorder xfer_mask fields such that higher transfer mode is placed at higher order bit. As thie reordering breaks ata_mode_string(), this patch also rewrites ata_mode_string(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-11[PATCH] libata: rename ATA_FLAG_FLUSH_PIO_TASK to ATA_FLAG_FLUSH_PORT_TASKTejun Heo
Rename ATA_FLAG_FLUSH_PIO_TASK to ATA_FLAG_FLUSH_PORT_TASK. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-11[PATCH] libata: kill unused pio_task and packet_taskTejun Heo
Kill unused pio_task and packet_task. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-11[PATCH] libata: implement port_taskTejun Heo
Implement port_task. LLDD's can schedule a function to be executed with context after specified delay. libata core takes care of synchronization against EH. This is generalized form of pio_task and packet_task which are tied to PIO hsm implementation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05[PATCH] libata: implement ata_dev_revalidate()Tejun Heo
ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] libata: fold ata_dev_config() into ata_dev_configure()Tejun Heo
ata_dev_config() needs to be done everytime a device is configured. Fold it into ata_dev_configure(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] libata: convert dev->id to pointerTejun Heo
Convert dev->id from array to pointer. This is to accomodate revalidation. During revalidation, both old and new IDENTIFY pages should be accessible and single ->id array doesn't cut it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] libata: seperate out ata_class_present()Tejun Heo
Seperate out ata_class_present() from ata_dev_present(). This is useful because new reset mechanism deals with classes[] directly. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-20Merge branch 'upstream-fixes'Jeff Garzik
2006-02-20[PATCH] libata: fix qc->n_elem == 0 case handling in ata_qc_next_sgTejun Heo
This patch makes ata_for_each_sg() start with pad_sgent when qc->n_elem is zero. Previously, ata_for_each_sg() unconditionally started with qc->__sg, handling the first sg to fill_sg() routines even when the entry was invalid. And while at it, unwind ?: in ata_qc_next_sg() into if statement. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20[PATCH] libata: rename ata_dev_id_[c_]string()Tejun Heo
This patch renames ata_dev_id_[c_]string() to ata_id_[c_]string(). All other functions which read data from ATA ID data start with ata_id and those two function names were getting too long. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12[PATCH] libata: add per-device max_sectorsTejun Heo
If a low level driver wants to control max_sectors, it had to adjust ap->host->max_sectors and set ATA_DFLAG_LOCK_SECTORS to tell ata_scsi_slave_config not to override the limit. This is not only cumbersome but also incorrect for hosts which support more than one devices per port. This patch adds per-device ->max_sectors. If the field is unset (zero), libata core layer will adjust ->max_sectors according to default rules. If the field is set, libata honors the setting. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12[PATCH] libata: move cdb_len for host to deviceTejun Heo
cdb_len is per-device property. Sharing cdb_len on ap results in inaccurate configuration on revalidation and hotplugging. This patch makes cdb_len per-device. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12[PATCH] libata: implement ata_dev_id_c_string()Tejun Heo
ata_dev_id_c_string() reads ATA string from the specified offset of the given IDENTIFY PAGE and puts it in the specified buffer in trimmed and NULL-terminated form. The caller must supply a buffer which is one byte larger than the maximum size of the target ID string. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-11[PATCH] libata: kill assert() macroTejun Heo
libata assert() now has no user left. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-11[PATCH] libata: inline ata_qc_complete()Tejun Heo
This patch inlines ata_qc_complete() and uninlines __ata_qc_complete() as suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10[PATCH] libata: implement ata_scsi_timed_out()Tejun Heo
Implement ata_scsi_timed_out(), to be used as scsi_host_template->eh_timed_out callback for all libata drivers. Without this function, the following race exists. If a qc completes after SCSI timer expires but before libata EH kicks in, the qc gets completed but the scsicmd still gets passed to libata EH resulting in ->eng_timeout invocation with NULL qc, which none is handling properly. This patch makes sure that scmd and qc share the same lifetime. Original idea from Jeff Garzik <jgarzik@pobox.com>. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10[PATCH] libata: add ATA_QCFLAG_EH_SCHEDULEDTejun Heo
Add ATA_QCFLAG_EH_SCHEDULED. If this flag is set, the qc is owned by EH and normal completion path is not allowed to finish it. This patch doesn't actually use this flag. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-09[PATCH] libata: implement ata_std_probeinit()Tejun Heo
This patch implements the off-the-shelf probeinit component operation. Currently, all it does is waking up the PHY if it's a SATA port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-09[PATCH] libata: add probeinit component operation to ata_drive_probe_reset()Tejun Heo
This patch adds probeinit component operation to ata_drive_probe_reset(). If present, this new operation is called before performing any reset. The operations's roll is to prepare @ap for following probe-reset operations. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-09[PATCH] libata: EH / pio tasks synchronizationTejun Heo
This patch makes sure that pio tasks are flushed before proceeding with EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-09[PATCH] libata: implement ATA_FLAG_IN_EH port flagTejun Heo
ATA_FLAG_IN_EH flag is set on entry to EH and cleared on completion. This patch just sets and clears the flag. Following patches will build normal qc execution / EH synchronization aroung this flag. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-27[PATCH] libata: implement standard reset component operations and ->probe_resetTejun Heo
Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-27[PATCH] libata: implement ata_drive_probe_reset()Tejun Heo
Most low level drivers share supported reset/classify actions and sequence. This patch implements ata_drive_probe_reset() which helps constructing ->probe_reset from three component operations - softreset, hardreset and postreset. This minimizes duplicate code and yet allows flexibility if needed. The three component operations can also be shared by EH later. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26[PATCH] libata: new ->probe_reset operationTejun Heo
Add new ->probe_reset operation to ata_port_operations obsoleting ->phy_reset. The main difference from ->phy_reset is that the new operation is not allowed to manipulate libata internals directly. It's not allowed to configure or disable the port or devices. It can only succeed or fail and classify attached devices into passed @classes. This change gives more control to higher level and eases sharing reset methods with EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26[PATCH] libata: export ata_busy_sleepTejun Heo
Export ata_busy_sleep(), to be used by low level driver reset functions. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26[PATCH] libata: implement and apply ata_eh_qc_complete/retry()Tejun Heo
Implement ata_eh_qc_complete/retry() using scsi_eh_finish_cmd() and scsi_eh_flush_done_q(). This removes all eh scsicmd finish hacks from low level drivers. This change was first suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26[PATCH] libata: return AC_ERR_* from issue functionsTejun Heo
Return AC_ERR_* mask from issue fuctions instead of 0/-1. This enables things like failing a qc with AC_ERR_HSM when the device doesn't set DRDY when the qc is about to be issued. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26[PATCH] libata: add detailed AC_ERR_* flagsTejun Heo
Add detailed AC_ERR_* flags and use them. Long-term goal is to describe all errors with err_mask and tf combination (tf for failed sector information, etc...). After proper error diagnosis is implemented, sense data should also be generated from err_mask instead of directly from hardware tf registers as it is currently. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26[PATCH] libata: make the owner of a qc responsible for freeing itTejun Heo
qc used to be freed automatically on command completion. However, as a qc can carry information about its completion status, it can be useful to its owner/issuer after command completion. This patch makes freeing qc responsibility of its owner. This simplifies ata_exec_internal() and makes command turn-around for atapi request sensing less hackish. This change was originally suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17Merge branch 'debug'Jeff Garzik
2006-01-17[PATCH] libata: Fix heuristic typos add LBA48PIO flag and support code, add ↵Alan Cox
IRQ flag for next diff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17From: Borislav Petkov <petkov@uni-muenster.de>Randy Dunlap
libata new debugging macro definitions Signed-off-by: Borislav Petkov <petkov@uni-muenster.de> Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com>
2006-01-17[PATCH] libata: add a function to decide if we need iordyAlan Cox
This ought to be simple but for PIO2 we have to poke around the drive data to get it 100% correct. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-06Merge branch 'post-2.6.15' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
Manual fixup for merge with Jens' "Suspend support for libata", commit ID 9b847548663ef1039dd49f0eb4463d001e596bc3. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] Suspend support for libataJens Axboe
This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[BLOCK] add FUA support to libataTejun Heo
Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2005-12-13Merge branch 'upstream-fixes'Jeff Garzik