aboutsummaryrefslogtreecommitdiff
path: root/include/linux/lockd
AgeCommit message (Collapse)Author
2009-03-10NLM: Shrink the IPv4-only version of nlm_cmp_addr()Chuck Lever
Clean up/micro-optimatization: Make the AF_INET-only version of nlm_cmp_addr() smaller. This matches the style of nlm_privileged_requester(), and makes the AF_INET-only version of nlm_cmp_addr() nearly the same size as it was before IPv6 support. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-01-06NLM: Rewrite IPv4 privileged requester's checkChuck Lever
Clean up. For consistency, rewrite the IPv4 check to match the same style as the new IPv6 check. Note that ipv4_is_loopback() is somewhat broader in its interpretation of what is a loopback address than simply "127.0.0.1". Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NLM: nlm_privileged_requester() doesn't recognize mapped loopback addressChuck Lever
Commit b85e4676 added the nlm_privileged_requester() helper to check whether an RPC request was sent from a local privileged caller. It recognizes IPv4 privileged callers (from "127.0.0.1"), and IPv6 privileged callers (from "::1"). However, IPV6_ADDR_LOOPBACK is not set for the mapped IPv4 loopback address (::ffff:7f00:0001), so the test breaks when the kernel's RPC service is IPv6-enabled but user space is calling via the IPv4 loopback address. This is actually the most common case for IPv6- enabled RPC services on Linux. Rewrite the IPv6 check to handle the mapped IPv4 loopback address as well as a normal IPv6 loopback address. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Move nsm_addr() to fs/lockd/mon.cChuck Lever
Clean up: nsm_addr_in() is no longer used, and nsm_addr() is used only in fs/lockd/mon.c, so move it there. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Remove include/linux/lockd/sm_inter.hChuck Lever
Clean up: The include/linux/lockd/sm_inter.h header is nearly empty now. Remove it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NLM: Remove "create" argument from nsm_find()Chuck Lever
Clean up: nsm_find() now has only one caller, and that caller unconditionally sets the @create argument. Thus the @create argument is no longer needed. Since nsm_find() now has a more specific purpose, pick a more appropriate name for it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Add nsm_lookup() functionChuck Lever
Introduce a new API to fs/lockd/mon.c that allows nlm_host_rebooted() to lookup up nsm_handles via the contents of an nlm_reboot struct. The new function is equivalent to calling nsm_find() with @create set to zero, but it takes a struct nlm_reboot instead of separate arguments. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NLM: Decode "priv" argument of NLMPROC_SM_NOTIFY as an opaqueChuck Lever
The NLM XDR decoders for the NLMPROC_SM_NOTIFY procedure should treat their "priv" argument truly as an opaque, as defined by the protocol, and let the upper layers figure out what is in it. This will make it easier to modify the contents and interpretation of the "priv" argument, and keep knowledge about what's in "priv" local to fs/lockd/mon.c. For now, the NLM and NSM implementations should behave exactly as they did before. The formation of the address of the rebooted host in nlm_host_rebooted() may look a little strange, but it is the inverse of how nsm_init_private() forms the private cookie. Plus, it's going away soon anyway. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NLM: Change nlm_host_rebooted() to take a single nlm_reboot argumentChuck Lever
Pass the nlm_reboot data structure directly from the NLMPROC_SM_NOTIFY XDR decoders to nlm_host_rebooted(). This eliminates some packing and unpacking of the NLMPROC_SM_NOTIFY results, and prepares for passing these results, including the "priv" cookie, directly to a lookup routine in fs/lockd/mon.c. This patch changes code organization but should not cause any behavioral change. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Generate NSMPROC_MON's "priv" argument when nsm_handle is createdChuck Lever
Introduce a new data type, used by both the in-kernel NLM and NSM implementations, that is used to manage the opaque "priv" argument for the NSMPROC_MON and NLMPROC_SM_NOTIFY calls. Construct the "priv" cookie when the nsm_handle is created. The nsm_init_private() function may look a little strange, but it is roughly equivalent to how the XDR encoder formed the "priv" argument. It's going to go away soon. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Move nsm_find() to fs/lockd/mon.cChuck Lever
The nsm_find() function sets up fresh nsm_handle entries. This is where we will store the "priv" cookie used to lookup nsm_handles during reboot recovery. The cookie will be constructed when nsm_find() creates a new nsm_handle. As much as possible, I would like to keep everything that handles a "priv" cookie in fs/lockd/mon.c so that all the smarts are in one source file. That organization should make it pretty simple to see how all this works. To me, it makes more sense than the current arrangement to keep nsm_find() with nsm_monitor() and nsm_unmonitor(). So, start reorganizing by moving nsm_find() into fs/lockd/mon.c. The nsm_release() function comes along too, since it shares the nsm_lock global variable. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Move NSM program and procedure numbers to fs/lockd/mon.cChuck Lever
Clean up: Move the RPC program and procedure numbers for NSM into the one source file that needs them: fs/lockd/mon.c. And, as with NLM, NFS, and rpcbind calls, use NSMPROC_FOO instead of SM_FOO for NSM procedure numbers. Finally, make a couple of comments more precise: what is referred to here as SM_NOTIFY is really the NLM (lockd) NLMPROC_SM_NOTIFY downcall, not NSMPROC_NOTIFY. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Move NSM-related XDR data structures to lockd's xdr.hChuck Lever
Clean up: NSM's XDR data structures are used only in fs/lockd/mon.c, so move them there. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NLM: Move the public declaration of nsm_unmonitor() to lockd.hChuck Lever
Clean up. Make the nlm_host argument "const," and move the public declaration to lockd.h. Add a documenting comment. Bruce observed that nsm_unmonitor()'s only caller doesn't care about its return code, so make nsm_unmonitor() return void. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Release nsmhandle in nlm_destroy_hostChuck Lever
The nsm_handle's reference count is bumped in nlm_lookup_host(). It should be decremented in nlm_destroy_host() to make it easier to see the balance of these two operations. Move the nsm_release() call to fs/lockd/host.c. The h_nsmhandle pointer is set in nlm_lookup_host(), and never cleared. The nlm_destroy_host() function is never called for the same nlm_host twice, so h_nsmhandle won't ever be NULL when nsm_unmonitor() is called. All references to the nlm_host are gone before it is freed. We can skip making h_nsmhandle NULL just before the nlm_host is deallocated. It's also likely we can remove the h_nsmhandle NULL check in nlmsvc_is_client() as well, but we can do that later when rearchitect- ing the nlm_host cache. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NLM: Move the public declaration of nsm_monitor() to lockd.hChuck Lever
Clean up. Make the nlm_host argument "const," and move the public declaration to lockd.h with other NSM public function (nsm_release, eg) and global variable declarations. Add a documenting comment. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Support IPv6 version of mon_nameChuck Lever
The "mon_name" argument of the NSMPROC_MON and NSMPROC_UNMON upcalls is a string that contains the hostname or IP address of the remote peer to be notified when this host has rebooted. The sm-notify command uses this identifier to contact the peer when we reboot, so it must be either a well-qualified DNS hostname or a presentation format IP address string. When the "nsm_use_hostnames" sysctl is set to zero, the kernel's NSM provides a presentation format IP address in the "mon_name" argument. Otherwise, the "caller_name" argument from NLM requests is used, which is usually just the DNS hostname of the peer. To support IPv6 addresses for the mon_name argument, we use the nsm_handle's address eye-catcher, which already contains an appropriate presentation format address string. Using the eye-catcher string obviates the need to use a large buffer on the stack to form the presentation address string for the upcall. This patch also addresses a subtle bug. An NSMPROC_MON request and the subsequent NSMPROC_UNMON request for the same peer are required to use the same value for the "mon_name" argument. Otherwise, rpc.statd's NSMPROC_UNMON processing cannot locate the database entry for that peer and remove it. If the setting of nsm_use_hostnames is changed between the time the kernel sends an NSMPROC_MON request and the time it sends the NSMPROC_UNMON request for the same peer, the "mon_name" argument for these two requests may not be the same. This is because the value of "mon_name" is currently chosen at the moment the call is made based on the setting of nsm_use_hostnames To ensure both requests pass identical contents in the "mon_name" argument, we now select which string to use for the argument in the nsm_monitor() function. A pointer to this string is saved in the nsm_handle so it can be used for a subsequent NSMPROC_UNMON upcall. NB: There are other potential problems, such as how nlm_host_rebooted() might behave if nsm_use_hostnames were changed while hosts are still being monitored. This patch does not attempt to address those problems. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NSM: Use modern style for sm_name field in nsm_handleChuck Lever
Clean up: I'm about to add another "char *" field to the nsm_handle structure. The sm_name field uses an older style of declaring a "char *" field. If I match that style for the new field, checkpatch.pl will complain. So, fix the sm_name field to use the new style. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NLM: Support IPv6 scope IDs in nlm_display_address()Chuck Lever
Scope ID support is needed since the kernel's NSM implementation is about to use these displayed addresses as a mon_name in some cases. When nsm_use_hostnames is zero, without scope ID support NSM will fail to handle peers that contact us via a link-local address. Link-local addresses do not work without an interface ID, which is stored in the sockaddr's sin6_scope_id field. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NLM: Remove address eye-catcher buffers from nlm_hostChuck Lever
The h_name field in struct nlm_host is a just copy of h_nsmhandle->sm_name. Likewise, the contents of the h_addrbuf field should be identical to the sm_addrbuf field. The h_srcaddrbuf field is used only in one place for debugging. We can live without this until we get %pI formatting for printk(). Currently these buffers are 48 bytes, but we need to support scope IDs in IPv6 presentation addresses, which means making the buffers even larger. Instead, let's find ways to eliminate them to save space. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06NLM: Use modern style for pointer fields in nlm_hostChuck Lever
Clean up: I'm about to add another "char *" field to the nlm_host structure. The h_name field, for example, uses an older style of declaring a "char *" field. If I match that style for the new field, checkpatch.pl will complain. So, fix pointer fields to use the new style. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-12-23NLM: allow lockd requests from an unprivileged portChuck Lever
If the admin has specified the "noresvport" option for an NFS mount point, the kernel's NFS client uses an unprivileged source port for the main NFS transport. The kernel's lockd client should use an unprivileged port in this case as well. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-04NLM: Remove "proto" argument from lockd_up()Chuck Lever
Clean up: Now that lockd_up() starts listeners for both transports, the "proto" argument is no longer needed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-03lockd: Remove unused fields in the nlm_reboot structureChuck Lever
The nlm_reboot structure is used to store information provided by the NSM_NOTIFY procedure. This procedure is not specified by the NLM or NSM protocols, other than to say that the procedure can be used to transmit information private to a particular NLM/NSM implementation. For Linux, the callback arguments include the name of the monitored host, the new NSM state of the host, and a 16-byte private opaque. As a clean up, remove the unused fields and the server-side XDR logic that decodes them. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-03lockd: Add helper to sanity check incoming NOTIFY requestsChuck Lever
lockd accepts SM_NOTIFY calls only from a privileged process on the local system. If lockd uses an AF_INET6 listener, the sender's address (ie the local rpc.statd) will be the IPv6 loopback address, not the IPv4 loopback address. Make sure the privilege test in nlmsvc_proc_sm_notify() and nlm4svc_proc_sm_notify() works for both AF_INET and AF_INET6 family addresses by refactoring the test into a helper and adding support for IPv6 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-03lockd: change nlmclnt_grant() to take a "struct sockaddr *"Chuck Lever
Adjust the signature and callers of nlmclnt_grant() to pass a "struct sockaddr *" instead of a "struct sockaddr_in *" in order to support IPv6 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-03lockd: Adjust nlmsvc_lookup_host() to accomodate AF_INET6 addressesChuck Lever
Fix up nlmsvc_lookup_host() to pass AF_INET6 source addresses to nlm_lookup_host(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-03lockd: Adjust nlmclnt_lookup_host() signature to accomodate non-AF_INETChuck Lever
Pass a struct sockaddr * and a length to nlmclnt_lookup_host() to accomodate non-AF_INET family addresses. As a side benefit, eliminate the hostname_len argument, as the hostname is always NUL-terminated. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-03lockd: move grace period checks to common codeJ. Bruce Fields
Do all the grace period checks in svclock.c. This simplifies the code a bit, and will ease some later changes. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-03nfsd: common grace period controlJ. Bruce Fields
Rewrite grace period code to unify management of grace period across lockd and nfsd. The current code has lockd and nfsd cooperate to compute a grace period which is satisfactory to them both, and then individually enforce it. This creates a slight race condition, since the enforcement is not coordinated. It's also more complicated than necessary. Here instead we have lockd and nfsd each inform common code when they enter the grace period, and when they're ready to leave the grace period, and allow normal locking only after both of them are ready to leave. We also expect the locks_start_grace()/locks_end_grace() interface here to be simpler to build on for future cluster/high-availability work, which may require (for example) putting individual filesystems into grace, or enforcing grace periods across multiple cluster nodes. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29lockd: Teach nlm_cmp_addr() to support AF_INET6 addressesChuck Lever
Update the nlm_cmp_addr() helper to support AF_INET6 as well as AF_INET addresses. New version takes two "struct sockaddr *" arguments instead of "struct sockaddr_in *" arguments. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29NSM: Use sockaddr_storage for sm_addr fieldChuck Lever
To store larger addresses in the nsm_handle structure, make sm_addr a sockaddr_storage. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29lockd: Use sockaddr_storage for h_saddr fieldChuck Lever
To store larger addresses in the nlm_host structure, make h_saddr a sockaddr_storage. And let's call it something more self-explanatory: "saddr" could easily be mistaken for "server address". Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29lockd: Use sockaddr_storage + length for h_addr fieldChuck Lever
To store larger addresses in the nlm_host structure, make h_addr a sockaddr_storage, and add an address length field. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29lockd: address-family independent printable addressesChuck Lever
Knowing which source address is used for communicating with remote NLM services can be helpful for debugging configuration problems on hosts with multiple addresses. Keep the dprintk debugging here, but adapt it so it displays AF_INET6 addresses properly. There are also a couple of dprintk clean-ups as well. At some point we will aggregate the helpers that display presentation format addresses into a single set of shared helpers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-07-15lockd: Pass "struct sockaddr *" to new failover-by-IP functionChuck Lever
Pass a more generic socket address type to nlmsvc_unlock_all_by_ip() to allow for future support of IPv6. Also provide additional sanity checking in failover_unlock_ip() when constructing the server's IP address. As an added bonus, provide clean kerneldoc comments on related NLM interfaces which were recently added. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-07-15lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_lockJeff Layton
nlmsvc_lock calls nlmsvc_lookup_host to find a nlm_host struct. The callers of this function, however, call nlmsvc_retrieve_args or nlm4svc_retrieve_args, which also return a nlm_host struct. Change nlmsvc_lock to take a host arg instead of calling nlmsvc_lookup_host itself and change the callers to pass a pointer to the nlm_host they've already found. Since nlmsvc_testlock() now just uses the caller's reference, we no longer need to get or release it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-07-15lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_testlockJeff Layton
nlmsvc_testlock calls nlmsvc_lookup_host to find a nlm_host struct. The callers of this functions, however, call nlmsvc_retrieve_args or nlm4svc_retrieve_args, which also return a nlm_host struct. Change nlmsvc_testlock to take a host arg instead of calling nlmsvc_lookup_host itself and change the callers to pass a pointer to the nlm_host they've already found. We take a reference to host in the place where nlmsvc_testlock() previous did a new lookup, so the reference counting is unchanged from before. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-04-25lockd: unlock lockd locks held for a certain filesystemWendy Cheng
Add /proc/fs/nfsd/unlock_filesystem, which allows e.g.: shell> echo /mnt/sfs1 > /proc/fs/nfsd/unlock_filesystem so that a filesystem can be unmounted before allowing a peer nfsd to take over nfs service for the filesystem. Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Cc: Lon Hohberger <lhh@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> fs/lockd/svcsubs.c | 66 +++++++++++++++++++++++++++++++++++++++----- fs/nfsd/nfsctl.c | 65 +++++++++++++++++++++++++++++++++++++++++++ include/linux/lockd/lockd.h | 7 ++++ 3 files changed, 131 insertions(+), 7 deletions(-)
2008-04-25lockd: unlock lockd locks associated with a given server ipWendy Cheng
For high-availability NFS service, we generally need to be able to drop file locks held on the exported filesystem before moving clients to a new server. Currently the only way to do that is by shutting down lockd entirely, which is often undesireable (for example, if you want to continue exporting other filesystems). This patch allows the administrator to release all locks held by clients accessing the client through a given server ip address, by echoing that address to a new file, /proc/fs/nfsd/unlock_ip, as in: shell> echo 10.1.1.2 > /proc/fs/nfsd/unlock_ip The expected sequence of events can be: 1. Tear down the IP address 2. Unexport the path 3. Write IP to /proc/fs/nfsd/unlock_ip to unlock files 4. Signal peer to begin take-over. For now we only support IPv4 addresses and NFSv2/v3 (NFSv4 locks are not affected). Also, if unmounting the filesystem is required, we assume at step 3 that clients using the given server ip are the only clients holding locks on the given filesystem; otherwise, an additional patch is required to allow revoking all locks held by lockd on a given filesystem. Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Cc: Lon Hohberger <lhh@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> fs/lockd/svcsubs.c | 66 +++++++++++++++++++++++++++++++++++++++----- fs/nfsd/nfsctl.c | 65 +++++++++++++++++++++++++++++++++++++++++++ include/linux/lockd/lockd.h | 7 ++++ 3 files changed, 131 insertions(+), 7 deletions(-)
2008-04-19NLM/lockd: Add a reference counter to struct nlm_rqstTrond Myklebust
When we replace the existing synchronous RPC calls with asynchronous calls, the reference count will be needed in order to allow us to examine the result of the RPC call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-19lockd: introduce new function to encode private argument in SM_MON requestsChuck Lever
Clean up: refactor the encoding of the opaque 16-byte private argument in xdr_encode_mon(). This will be updated later to support IPv6 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-19lockd: bring a few function declarations up to dateChuck Lever
Clean-up: replace __inline__ and use up-to-date function declaration conventions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-19NLM: NLM protocol version numbers are u32Chuck Lever
Clean up: RPC protocol version numbers are u32. Make sure we use an appropriate type for NLM version numbers when calling nlm_lookup_host(). Eliminates a harmless mixed sign comparison in nlm_host_lookup(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-01NLM: Fix sign of length of NLM variable length stringsChuck Lever
According to The Open Group's NLM specification, NLM callers are variable length strings. XDR variable length strings use an unsigned 32 bit length. And internally, negative string lengths are not meaningful for the Linux NLM implementation. Clean up: Make nlm_lock.len and nlm_reboot.len unsigned integers. This makes the sign of NLM string lengths consistent with the sign of xdr_netobj lengths. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-By: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-01-30NLM: Introduce an arguments structure for nlmclnt_init()Chuck Lever
Clean up: pass 5 arguments to nlmclnt_init() in a structure similar to the new nfs_client_initdata structure. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2008-01-30NLM/NFS: Use cached nlm_host when calling nlmclnt_proc()Chuck Lever
Now that each NFS mount point caches its own nlm_host structure, it can be passed to nlmclnt_proc() for each lock request. By pinning an nlm_host for each mount point, we trade the overhead of looking up or creating a fresh nlm_host struct during every NLM procedure call for a little extra memory. We also restrict the nlmclnt_proc symbol to limit the use of this call to in-tree modules. Note that nlm_lookup_host() (just removed from the client's per-request NLM processing) could also trigger an nlm_host garbage collection. Now client-side nlm_host garbage collection occurs only during NFS mount processing. Since the NFS client now holds a reference on these nlm_host structures, they wouldn't have been affected by garbage collection anyway. Given that nlm_lookup_host() reorders the global nlm_host chain after every successful lookup, and that a garbage collection could be triggered during the call, we've removed a significant amount of per-NLM-request CPU processing overhead. Sidebar: there are only a few remaining references to the internals of NFS inodes in the client-side NLM code. The only references I found are related to extracting or comparing the inode's file handle via NFS_FH(). One is in nlmclnt_grant(); the other is in nlmclnt_setlockargs(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30NLM: Introduce external nlm_host set-up and tear-down functionsChuck Lever
We would like to remove the per-lock-operation nlm_lookup_host() call from nlmclnt_proc(). The new architecture pins an nlm_host structure to each NFS client superblock that has the "lock" mount option set. The NFS client passes in the pinned nlm_host structure during each call to nlmclnt_proc(). NFS client unmount processing "puts" the nlm_host so it can be garbage- collected later. This patch introduces externally callable NLM functions that handle mount-time nlm_host set up and tear-down. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-17knfsd: lockd: nfsd4: use same grace period for lockd and nfsd4Marc Eshel
Both lockd and (in the nfsv4 case) nfsd enforce a "grace period" after reboot, during which clients may reclaim locks from the previous server instance, but may not acquire new locks. Currently the lockd and nfsd enforce grace periods of different lengths. This may cause problems when we reboot a server with both v2/v3 and v4 clients. For example, if the lockd grace period is shorter (as is likely the case), then a v3 client might acquire a new lock that conflicts with a lock already held (but not yet reclaimed) by a v4 client. This patch calculates a lease time that lockd and nfsd can both use. Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10NLM: fix source address of callback to clientFrank van Maarseveen
Use the destination address of the original NLM request as the source address in callbacks to the client. Signed-off-by: Frank van Maarseveen <frankvm@frankvm.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>