aboutsummaryrefslogtreecommitdiff
path: root/include/linux/pci_ids.h
AgeCommit message (Collapse)Author
2009-04-01Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits) PCI: fix HT MSI mapping fix PCI: don't enable too much HT MSI mapping x86/PCI: make pci=lastbus=255 work when acpi is on PCI: save and restore PCIe 2.0 registers PCI: update fakephp for bus_id removal PCI: fix kernel oops on bridge removal PCI: fix conflict between SR-IOV and config space sizing powerpc/PCI: include pci.h in powerpc MSI implementation PCI Hotplug: schedule fakephp for feature removal PCI Hotplug: rename legacy_fakephp to fakephp PCI Hotplug: restore fakephp interface with complete reimplementation PCI: Introduce /sys/bus/pci/devices/.../rescan PCI: Introduce /sys/bus/pci/devices/.../remove PCI: Introduce /sys/bus/pci/rescan PCI: Introduce pci_rescan_bus() PCI: do not enable bridges more than once PCI: do not initialize bridges more than once PCI: always scan child buses PCI: pci_scan_slot() returns newly found devices PCI: don't scan existing devices ... Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
2009-03-30Merge commit 'origin/master' into nextBenjamin Herrenschmidt
Manual merge of: arch/powerpc/include/asm/elf.h drivers/i2c/busses/i2c-mpc.c
2009-03-28i2c-piix4: Add support for the Broadcom HT1100 chipsetFlavio Leitner
Add support for the Broadcom HT1100 LD chipset (SMBus function.) Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-28i2c-nforce2: Add support for MCP67, MCP73, MCP78S and MCP79Jean Delvare
The MCP78S and MCP79 appear to be compatible with the previous nForce chips as far as the SMBus controller is concerned. The MCP67 and MCP73 were not tested yet but I'd be very surprised if they weren't compatible too. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Oleg Ryjkov <olegr@olegr.ca> Cc: Malcolm Lalkaka <mlalkaka@gmail.com> Cc: Zbigniew Luszpinski <zbiggy@o2.pl>
2009-03-27ath5k: Support LED's on Acer Extensa 5620zTulio Magno Quites Machado Filho
Add vendor ID for Quanta Microsystems and update the led table with the reported device. Reported-by: Scott Barnes <nekoreeve@gmail.com> Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-26Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/net/wimax/i2400m/usb-notif.c
2009-03-24Merge branch 'topic/hda' into for-linusTakashi Iwai
2009-03-20PCI: Compaq Evo D510 SMBus quirk using USB instead of VGADavid O'Shea
On the Compaq Evo D510 SFF/CMT, a PCI quirk activated the SMBus device based on detection of the on-board VGA controller, but the on-board VGA is disabled if an AGP card is inserted, so look for one of the USB controllers instead. Signed-off-by: David O'Shea <dcoshea@hotmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-11Merge commit 'origin/master' into nextBenjamin Herrenschmidt
2009-02-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2009-02-208250: fix boot hang with serial console when using with Serial Over Lan portMauro Carvalho Chehab
Intel 8257x Ethernet boards have a feature called Serial Over Lan. This feature works by emulating a serial port, and it is detected by kernel as a normal 8250 port. However, this emulation is not perfect, as also noticed on changeset 7500b1f602aad75901774a67a687ee985d85893f. Before this patch, the kernel were trying to check if the serial TX is capable of work using IRQ's. This were done with a code similar this: serial_outp(up, UART_IER, UART_IER_THRI); lsr = serial_in(up, UART_LSR); iir = serial_in(up, UART_IIR); serial_outp(up, UART_IER, 0); if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) up->bugs |= UART_BUG_TXEN; This works fine for other 8250 ports, but, on 8250-emulated SoL port, the chip is a little lazy to down UART_IIR_NO_INT at UART_IIR register. Due to that, UART_BUG_TXEN is sometimes enabled. However, as TX IRQ keeps working, and the TX polling is now enabled, the driver miss-interprets the IRQ received later, hanging up the machine until a key is pressed at the serial console. This is the 6 version of this patch. Previous versions were trying to introduce a large enough delay between serial_outp and serial_in(up, UART_IIR), but not taking forever. However, the needed delay couldn't be safely determined. At the experimental tests, a delay of 1us solves most of the cases, but still hangs sometimes. Increasing the delay to 5us was better, but still doesn't solve. A very high delay of 50 ms seemed to work every time. However, poking around with delays and pray for it to be enough doesn't seem to be a good approach, even for a quirk. So, instead of playing with random large arbitrary delays, let's just disable UART_BUG_TXEN for all SoL ports. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18jsm: additional device supportAdam Lackorzynski
I have a Digi Neo 8 PCI card (114f:00b1) Serial controller: Digi International Digi Neo 8 (rev 05) that works with the jsm driver after using the following patch. Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Cc: Scott H Kilau <Scott_Kilau@digi.com> Cc: Wendy Xiong <wendyx@us.ibm.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18Merge commit 'origin/master' into nextBenjamin Herrenschmidt
Manual merge of: arch/powerpc/include/asm/pgtable-ppc32.h
2009-02-17Add support for VT6415 PCIE PATA IDE Host ControllerZlatko Calusic
Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-11Merge commit 'kumar/next' into nextBenjamin Herrenschmidt
2009-02-09Merge branch 'topic/quirk-cleanup' into topic/hdaTakashi Iwai
2009-02-03Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-02-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/Kconfig
2009-02-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI hotplug: Change link order of pciehp & acpiphp PCI hotplug: fakephp: Allocate PCI resources before adding the device PCI MSI: Fix undefined shift by 32 PCI PM: Do not wait for buses in B2 or B3 during resume PCI PM: Power up devices before restoring their state PCI PM: Fix hibernation breakage on EeePC 701 PCI: irq and pci_ids patch for Intel Tigerpoint DeviceIDs PCI PM: Fix suspend error paths and testing facility breakage
2009-01-29ath5k: support LED's on emachines E510 notebookTulio Magno Quites Machado Filho
Add vendor ID for AMBIT and use it to set the ath5k LED gpio. base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: support LEDs on Acer Aspire One netbookBob Copeland
Add vendor ID for Foxconn and use it to set the ath5k LED gpio and polarity for Acer branded laptops. base.c: Changes-licensed-under: 3-Clause-BSD Reported-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-28powerpc/fsl_pci: Add MPC83xx PCI-E controller RC mode supportAnton Vorontsov
This patch adds support for PCI-Express controllers as found on the newer MPC83xx chips. The work is loosely based on the Tony Li's patch[1], but unlike the original patch, this patch implements sliding window for the Type 1 transactions using outbound window translations, so we don't have to ioremap the whole PCI-E configuration space. [1] http://ozlabs.org/pipermail/linuxppc-dev/2008-January/049028.html Signed-off-by: Tony Li <tony.li@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-27PCI: irq and pci_ids patch for Intel Tigerpoint DeviceIDsSeth Heasley
This patch adds the Intel Tigerpoint LPC Controller DeviceIDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-26[libata] pata_via: support VX855, future chips whose IDE controller use 0x0571JosephChan@via.com.tw
It supports VX855 and future chips whose IDE controller uses PCI ID 0x0571. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-23Add PCI DFI vendor IDMatthew Ranostay
Add a define for DFI PCI vendor id. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-21sc92031: use device id directly instead of made-up nameCesar Eduardo Barros
Instead of making up a name for the device ids, put them directly in the device id table. Also move the vendor id to pci_ids.h. Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14it821x: Add ultra_mask quirk for Vortex86SXBrandon Philips
On Vortex86SX with IDE controller revision 0x11 ultra DMA must be disabled. This patch was tested by DMP and seems to work. It is a cleaned up version of their older Kernel patch: http://www.dmp.com.tw/tech/vortex86sx/patch-2.6.24-DMP.gz Tested-by: Shawn Lin <shawn@dmp.com.tw> Signed-off-by: Brandon Philips <bphilips@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06Resurrect IT8172 IDE controller driverShane McDonald
Support for the IT8172 IDE controller was removed from the kernel sometime after 2.6.18. Support for the only boards that used the IT8172 was removed from the kernel after 2.6.18, as they had never compiled since 2.6.0. However, there are a couple of platforms that use this chip: the PMC-Sierra Xiao Hu thin-client computer, which is no longer in production, and the Linksys NSS4000 Network Attached Storage box, which is based on the Xiao Hu board. I am attempting to add support for the Xiao Hu to the kernel, and this IT8172 IDE controller is the first bit of code in this effort. This patch resurrects the IT8172 IDE controller code. I began with the 2.6.18 version of the it8172.c file, and have moved it forward so that it works with the latest version of the kernel. I have run this driver on a PMC-Sierra Xiao Hu board with the 2.6.28 kernel, and I have had no problems with it in my configuration. The attached patch applies cleanly against 2.6.28. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: alan@lxorguk.ukuu.org.uk [bart: s/HWIF(drive)/drive->hwif/] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02serial_8250: support for Sealevel Systems Model 7803 COMM+8Flavio Leitner
Add support for Sealevel Systems Model 7803 COMM+8 Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02serial: set correct baud_base for Oxford Semiconductor Ltd EXSYS EX-41092 ↵Niels de Vos
Dual 16950 Serial adapter The PCI-card identified as "Oxford Semiconductor Ltd EXSYS EX-41092 Dual 16950 Serial adapter" is only usable with other devices (i.e. not the same card) after doing a "setserial /dev/ttyS<n> baud_base 115200". This baud_base should be default for this card. Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-28Merge commit 'v2.6.28-rc2' into x86/pci-ioapic-boot-irq-quirksIngo Molnar
2008-10-23Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (123 commits) dock: make dock driver not a module ACPI: fix ia64 build warning ACPI: hack around sysfs warning with link order ACPI suspend: fix build warning when CONFIG_ACPI_SLEEP=n intel_menlo: fix build warning panasonic-laptop: fix build ACPICA: Update version to 20080926 ACPICA: Add support for zero-length buffer-to-string conversions ACPICA: New: Validation for predefined ACPI methods/objects ACPICA: Fix for implicit return compatibility ACPICA: Fixed a couple memory leaks associated with "implicit return" ACPICA: Optimize buffer allocation procedure ACPICA: Fix possible memory leak, error exit path ACPICA: Fix fault after mem allocation failure in AML parser ACPICA: Remove unused ACPI register bit definition ACPICA: Update version to 20080829 ACPICA: Fix possible memory leak in acpi_ns_get_external_pathname ACPICA: Cleanup for internal Reference Object ACPICA: Update comments - no functional changes ACPICA: Update for Reference ACPI_OPERAND_OBJECT ...
2008-10-238250: Oxford Semiconductor DevicesLee Howard
Add support for the OxSemi 'Tornado' devices. Reformatted and reworked a bit by Alan Cox Signed-off-by: Lee Howard <lee.howard@mainpine.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23Merge branch 'linus' into testLen Brown
Conflicts: MAINTAINERS arch/x86/kernel/acpi/boot.c arch/x86/kernel/acpi/sleep.c drivers/acpi/Kconfig drivers/pnp/Makefile drivers/pnp/quirks.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-21i7300_idle driver v1.55Andy Henroid
The Intel 7300 Memory Controller supports dynamic throttling of memory which can be used to save power when system is idle. This driver does the memory throttling when all CPUs are idle on such a system. Refer to "Intel 7300 Memory Controller Hub (MCH)" datasheet for the config space description. Signed-off-by: Andy Henroid <andrew.d.henroid@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
2008-10-20x86/PCI: irq and pci_ids patch for Intel Ibex Peak DeviceIDsSeth Heasley
This patch updates the Intel Ibex Peak (PCH) LPC and SMBus Controller DeviceIDs. The LPC Controller ID is set by Firmware within the range of 0x3b00-3b1f. This range is included in pci_ids.h using min and max values, and irq.c now has code to handle the range (in lieu of 32 additions to a SWITCH statement). The SMBus Controller ID is a fixed-value and will not change. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-16matroxfb: support G200eV chipDarrick J. Wong
Support the Matrox G200eV chip, based on timings that I found in the X.org matrox driver. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/asm-x86/statfs.h
2008-10-11Merge phase #3 (IOMMU) of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-v28-for-linus-phase3-B' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits) AMD IOMMU: use iommu_device_max_index, fix AMD IOMMU: use iommu_device_max_index x86: add PCI IDs for AMD Barcelona PCI devices x86/iommu: use __GFP_ZERO instead of memset for GART x86/iommu: convert GART need_flush to bool x86/iommu: make GART driver checkpatch clean x86 gart: remove unnecessary initialization x86: restore old GART alloc_coherent behavior revert "x86: make GART to respect device's dma_mask about virtual mappings" x86: export pci-nommu's alloc_coherent iommu: remove fullflush and nofullflush in IOMMU generic option x86: remove set_bit_string() iommu: export iommu_area_reserve helper function AMD IOMMU: use coherent_dma_mask in alloc_coherent add AMD IOMMU tree to MAINTAINERS file AMD IOMMU: use cmd_buf_size when freeing the command buffer AMD IOMMU: calculate IVHD size with a function AMD IOMMU: remove unnecessary cast to u64 in the init code AMD IOMMU: free domain bitmap with its allocation order AMD IOMMU: simplify dma_mask_to_pages ...
2008-10-01x86: add PCI IDs for AMD Barcelona PCI devicesIngo Molnar
Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: oprofile-list <oprofile-list@lists.sourceforge.net> Cc: Barry Kasindorf <barry.kasindorf@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-24netxen: add pci idsDhananjay Phadke
Define old and new pci vendor and device ids. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18enic: add Cisco 10G Ethernet NIC driverScott Feldman
Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18atl2: add atl2 driverChris Snook
Driver for Atheros L2 10/100 network device. Includes necessary changes for Kconfig, Makefile, and pci_ids.h. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-10Merge commit 'v2.6.27-rc6' into x86/iommuIngo Molnar
2008-09-05x86, pci: add northbridge pci ids for fam 0x11 processorsJoerg Roedel
The PCI device ids for AMD family 0x11 processors are missing in pci_ids.h. This patch adds them. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-04Define and use PCI_DEVICE_ID_MARVELL_88ALP01_CCIC for CAFÉ camera driverDavid Woodhouse
Also, stop looking at the NAND controller (0x4100) and checking the device class. For a while during development, all three functions on the chip had the same ID. We made them fix that fairly promptly, and we can forget about it now. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Jonathan Corbet <corbet@lwn.net>
2008-09-04[MTD] [NAND] Define and use PCI_DEVICE_ID_MARVELL_88ALP01_NAND for CAFÉDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-04Use PCI_DEVICE_ID_88ALP01 for CAFÉ chip, rather than PCI_DEVICE_ID_CAFE.David Woodhouse
Probably better to use the official designation. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-15x86/PCI: irq and pci_ids patch for Intel Ibex Peak PCHsSeth Heasley
This patch adds the Intel Ibex Peak (PCH) LPC and SMBus Controller DeviceIDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-08-07PCI: remove duplicate symbol from pci_ids.hakpm@linux-foundation.org
pci.ids.h: remove a duplicated symbol Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Grant Coady <gcoady.lk@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 21:13:36 +0000