aboutsummaryrefslogtreecommitdiff
path: root/include/linux/pci_regs.h
AgeCommit message (Collapse)Author
2007-10-10[TG3]: Walk PCI capability lists.Matt Carlson
Newer tg3 devices shuffle around the registers in PCI configuration space. This patch changes the way the driver accesses the PCI capabilities registers. Hardcoded register locations are replaced with offsets from pci_find_capability() return values. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-12[PATCH] msi: Safer state caching.Eric W. Biederman
There are two ways pci_save_state and pci_restore_state are used. As helper functions during suspend/resume, and as helper functions around a hardware reset event. When used as helper functions around a hardware reset event there is no reason to believe the calls will be paired, nor is there a good reason to believe that if we restore the msi state from before the reset that it will match the current msi state. Since arch code may change the msi message without going through the driver, drivers currently do not have enough information to even know when to call pci_save_state to ensure they will have msi state in sync with the other kernel irq reception data structures. It turns out the solution is straight forward, cache the state in the existing msi data structures (not the magic pci saved things) and have the msi code update the cached state each time we write to the hardware. This means we never need to read the hardware to figure out what the hardware state should be. By modifying the caching in this manner we get to remove our save_state routines and only need to provide restore_state routines. The only fields that were at all tricky to regenerate were the msi and msi-x control registers and the way we regenerate them currently is a bit dependent upon assumptions on how we use the allow msi registers to be configured and used making the code a little bit brittle. If we ever change what cases we allow or how we configure the msi bits we can address the fragility then. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05[PATCH] msi: sanely support hardware level msi disablingEric W. Biederman
In some cases when we are not using msi we need a way to ensure that the hardware does not have an msi capability enabled. Currently the code has been calling disable_msi_mode to try and achieve that. However disable_msi_mode has several other side effects and is only available when msi support is compiled in so it isn't really appropriate. Instead this patch implements pci_msi_off which disables all msi and msix capabilities unconditionally with no additional side effects. pci_disable_device was redundantly clearing the bus master enable flag and clearing the msi enable bit. A device that is not allowed to perform bus mastering operations cannot generate intx or msi interrupt messages as those are essentially a special case of dma, and require bus mastering. So the call in pci_disable_device to disable msi capabilities was redundant. quirk_pcie_pxh also called disable_msi_mode and is updated to use pci_msi_off. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-20PCI: Add #defines for Hypertransport MSI fieldsMichael Ellerman
Add a few #defines for grabbing and working with the address fields in a HT_CAPTYPE_MSI_MAPPING capability. All from the HT spec v3.00. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20PCI: Add pci_find_ht_capability() for finding Hypertransport capabilitiesMichael Ellerman
There are already several places in the kernel that want to search a PCI device for a given Hypertransport capability. Although this is possible using pci_find_capability() etc., it makes sense to encapsulate that logic in a helper - pci_find_ht_capability(). To cater for searching exhaustively for a capability, we also provide pci_find_next_ht_capability(). We also need to cater for the fact that the HT capability fields may be either 3 or 5 bits wide. pci_find_ht_capability() deals with this for you, but callers using the #defines directly must handle that themselves. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01PCI: Make some MSI-X #defines genericMichael Ellerman
Move some MSI-X #defines into pci_regs.h so they can be used outside of drivers/pci. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-15[TG3]: Disable TSO on 5906 if CLKREQ is enabled.Michael Chan
Due to hardware errata, TSO must be disabled if the PCI Express clock request is enabled on 5906. The chip may hang when transmitting TSO frames if CLKREQ is enabled. Update version to 3.69. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-04[PATCH] Add Hypertransport capability definesEric W. Biederman
This adds defines for the hypertransport capability subtypes and starts using them a little. [akpm@osdl.org: fix typo] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26MSI: Rename PCI_CAP_ID_HT_IRQCONF into PCI_CAP_ID_HTBrice Goglin
0x08 is the HT capability, while PCI_CAP_ID_HT_IRQCONF would be the subtype 0x80 that mpic_scan_ht_pic() uses. Rename PCI_CAP_ID_HT_IRQCONF into PCI_CAP_ID_HT. And by the way, use it in the ipath driver instead of defining its own HT_CAPABILITY_ID. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] PCI: add PCI Express AER register definitions to pci_regs.hZhang, Yanmin
Add new defines of PCI-Express AER registers and their bits into file include/linux/pci_regs.h. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] PCI: Add PCI_CAP_ID_VNDRBrice Goglin
Add the vendor-specific extended capability PCI_CAP_ID_VNDR. It is required by the Myri-10G Ethernet driver. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09[PATCH] powerpc: Experimental support for new G5 Macs (#2)Benjamin Herrenschmidt
This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-08[PATCH] PCI: restore BAR values after D3hot->D0 for devices that need itJohn W. Linville
Some PCI devices (e.g. 3c905B, 3c556B) lose all configuration (including BARs) when transitioning from D3hot->D0. This leaves such a device in an inaccessible state. The patch below causes the BARs to be restored when enabling such a device, so that its driver will be able to access it. The patch also adds pci_restore_bars as a new global symbol, and adds a correpsonding EXPORT_SYMBOL_GPL for that. Some firmware (e.g. Thinkpad T21) leaves devices in D3hot after a (re)boot. Most drivers call pci_enable_device very early, so devices left in D3hot that lose configuration during the D3hot->D0 transition will be inaccessible to their drivers. Drivers could be modified to account for this, but it would be difficult to know which drivers need modification. This is especially true since often many devices are covered by the same driver. It likely would be necessary to replicate code across dozens of drivers. The patch below should trigger only when transitioning from D3hot->D0 (or at boot), and only for devices that have the "no soft reset" bit cleared in the PM control register. I believe it is safe to include this patch as part of the PCI infrastructure. The cleanest implementation of pci_restore_bars was to call pci_update_resource. Unfortunately, that does not currently exist for the sparc64 architecture. The patch below includes a null implemenation of pci_update_resource for sparc64. Some have expressed interest in making general use of the the pci_restore_bars function, so that has been exported to GPL licensed modules. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08[PATCH] PCI: clean up pci.h and split pci register info to separate header file.Greg Kroah-Hartman
This cleans up some of the #ifdef CONFIG_PCI stuff up, and moves the pci register info out to a separate file, where it belongs. Eventually we can stop including this file from within pci.h, but lots of code needs to be audited first. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>