aboutsummaryrefslogtreecommitdiff
path: root/include/linux/regulator
AgeCommit message (Collapse)Author
2009-04-28regulator: fix header file missing kernel-docRandy Dunlap
Add regulator header file missing kernel-doc: Warning(include/linux/regulator/driver.h:117): No description found for parameter 'set_mode' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Liam Girdwood <lrg@slimlogic.co.uk> cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Support disabling of unused regulators by machinesMark Brown
At present it is not possible for machine constraints to disable regulators which have been left on when the system starts, for example as a result of fixed default configurations in hardware. This means that power may be wasted by these regulators if they are not in use. Provide intial support for this with a late_initcall which will disable any unused regulators if the machine has enabled this feature by calling regulator_has_full_constraints(). If this has not been called then print a warning to encourage users to fully specify their constraints so that we can change this to be the default behaviour in future. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Allow boot_on regulators to be disabled by clientsMark Brown
Rather than incrementing the reference count for boot_on regulators (which prevents them being disabled later on) simply force the regulator to be enabled when applying the constraints. Previously boot_on was essentially equivalent to always_on. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: get_status() grows kerneldocDavid Brownell
Add kerneldoc for the new get_status() message. Fix the existing kerneldoc for that struct in two ways: (a) Syntax, making sure parameter descriptions immediately follow the one-line struct description and that the first blank lines is before any more expansive description; (b) Presentation for a few points, to highlight the fact that the previous "get" methods exist only to report the current configuration, not to display actual status. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: enumerate voltages (v2)David Brownell
Add a basic mechanism for regulators to report the discrete voltages they support: list_voltage() enumerates them using selectors numbered from 0 to an upper bound. Use those methods to force machine-level constraints into bounds. (Example: regulator supports 1.8V, 2.4V, 2.6V, 3.3V, and board constraints for that rail are 2.0V to 3.6V ... so the range of voltages is then 2.4V to 3.3V on this board.) Export those voltages to the regulator consumer interface, so for example regulator hooked up to an MMC/SD/SDIO slot can report the actual voltage options available to cards connected there. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Allow regulators to set the initial operating modeMark Brown
This is useful when wishing to run in a fixed operating mode that isn't the default. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: email - update email address and regulator webpage.Liam Girdwood
Remove deceased email address and update to new address. Also update website details in MAINTAINERS with correct page. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: fix header file missing kernel-docRandy Dunlap
Fix regulator/driver.h missing kernel-doc: Warning(linux-next-20090120//include/linux/regulator/driver.h:108): No description found for parameter 'get_status' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Liam Girdwood <lrg@slimlogic.co.uk> cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Hoist struct regulator_dev out of core to fix notifiersMark Brown
Commit 872ed3fe176833f7d43748eb88010da4bbd2f983 caused regulator drivers to take the struct regulator_dev lock themselves which requires that the struct be visible to them. Band aid this by making the struct visible. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Allow init_data to be passed to fixed voltage regulatorsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Allow init data to be supplied for bq24022Mark Brown
Previously it was not possible to do so, making it impossible for machines to configure the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Pass regulator init data as explict argument when registeringMark Brown
Rather than having the regulator init data read from the platform_data member of the struct device that is registered for the regulator make the init data an explict argument passed in when registering. This allows drivers to use the platform data for their own purposes if they wish. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31Regulator: Push lock out of _notifier_call_chain + add voltage change event.Jonathan Cameron
Regulator: Push lock out of _notifier_call_chain and into caller functions (side effect of fixing deadlock in regulator_force_disable) + Add a voltage changed event. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: add get_status()David Brownell
Based on previous LKML discussions: * Update docs for regulator sysfs class attributes to highlight the fact that all current attributes are intended to be control inputs, including notably "state" and "opmode" which previously implied otherwise. * Define a new regulator driver get_status() method, which is the first method reporting regulator outputs instead of inputs. It can report on/off and error status; or instead of simply "on", report the actual operating mode. For the moment, this is a sysfs-only interface, not accessible to regulator clients. Such clients can use the current notification interfaces to detect errors, if the regulator reports them. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: fix kernel-doc warningsRandy Dunlap
Fix kernel-doc warnings in regulator/driver.h: Warning(linux-next-20090108//include/linux/regulator/driver.h:95): Excess struct/union/enum/typedef member 'set_current' description in 'regulator_ops' Warning(linux-next-20090108//include/linux/regulator/driver.h:95): Excess struct/union/enum/typedef member 'get_current' description in 'regulator_ops' Warning(linux-next-20090108//include/linux/regulator/driver.h:124): No description found for parameter 'irq' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Liam Girdwood <lrg@slimlogic.co.uk> cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: Add missing kerneldocMark Brown
This is only the documentation that the kerneldoc system warns about. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08regulator: Clean up kerneldoc warningsMark Brown
Remove kerneldoc warnings that don't relate to missing documentation, mostly by renaming parameters in the documentation to match their actual names. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-13regulator: Fix typoMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-13regulator: core - Rework machine API to remove string based functions.Liam Girdwood
This improves the machine level API in order to configure regulator constraints and consumers as platform data and removes the old string based API that required several calls to set up each regulator. The intention is to create a struct regulator_init_data, populate it's fields with constraints, consumers devices, etc and then register the regulator device from board.c in the standard Linux way. e.g. regulator LDO2 (supplying codec and sim) platform data. /* regulator LDO2 consumer devices */ static struct regulator_consumer_supply ldo2_consumers[] = { { .dev = &platform_audio_device.dev, .supply = "codec_avdd", }, { .dev = &platform_sim_device.dev, .supply = "sim_vcc", } }; /* regulator LDO2 constraints */ static struct regulator_init_data ldo2_data = { .constraints = { .min_uV = 3300000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, .apply_uV = 1, }, .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers), .consumer_supplies = ldo2_consumers, }; /* machine regulator devices with thier consumers and constraints */ static struct platform_device wm8350_regulator_devices[] = { { .name = "wm8350-regulator", .id = WM8350_LDO_2, .dev = { .platform_data = &ldo2_data, }, }, }; Changes in detail:- o Removed all const char* regulator config functions in machine API. o Created new struct regulator_init_data to contain regulator machine configuration constraints and consmuers. o Changed set_supply(), set_machine_constraints(), set_consumer_device_supply() to remove their string identifier parameters. Also made them static and moved functions nearer top of core.c. o Removed no longer used inline func to_rdev() o Added regulator_get_init_drvdata() to retrieve init data. o Added struct device* as parameter to regulator_register(). o Changed my email address. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-07-30regulator: TI bq24022 Li-Ion Charger driverPhilipp Zabel
This adds a regulator driver for the TI bq24022 Single-Chip Li-Ion Charger with its nCE and ISET2 pins connected to GPIOs. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
2008-07-30regulator: fixed regulator interfaceMark Brown
This patch adds support for fixed regulators. This class of regulator is not software controllable but can coexist on machines with software controlable regulators. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
2008-07-30regulator: machine driver interfaceLiam Girdwood
This interface is for machine specific code and allows the creation of voltage/current domains (with constraints) for each regulator. It can provide regulator constraints that will prevent device damage through overvoltage or over current caused by buggy client drivers. It also allows the creation of a regulator tree whereby some regulators are supplied by others (similar to a clock tree). Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-07-30regulator: regulator driver interfaceLiam Girdwood
This allows regulator drivers to register their regulators and provide operations to the core. It also has a notifier call chain for propagating regulator events to clients. Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-07-30regulator: consumer device interfaceLiam Girdwood
Add support to allow consumer device drivers to control their regulator power supply. This uses a similar API to the kernel clock interface in that consumer drivers can get and put a regulator (like they can with clocks atm) and get/set voltage, current limit, mode, enable and disable. This should allow consumers complete control over their supply voltage and current limit. This also compiles out if not in use so drivers can be reused in systems with no regulator based power control. Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>