aboutsummaryrefslogtreecommitdiff
path: root/include/media/tuner.h
AgeCommit message (Collapse)Author
2008-01-25V4L/DVB (6435): tda8290: add support for NXP TDA18271 tuner and TDA8295 ↵Michael Krufky
analog demod Add basic support for NXP TDA8295 analog demod and TDA18271 tuner silicon. TDA8295 + TDA8275a not yet tested. TDA8290 + TDA18271 not yet supported. Digital mode of TDA18271 not yet tested & needs more work. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6422): Add the pending entries for xc2028/3028 based boardsMauro Carvalho Chehab
Also replaces all occurrences of TUNER_XCEIVE_XC3028 to TUNER_XC2028. Some work is still may be required to make sure that non-tm6000 drivers will be capable of using tuner-xc2028. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5978): tuner: Better tuner radio supportTrent Piepho
Add radio support for the Thomson DTT7612 tuner. This tuner uses a different 1st intermediate frequency than the other radio tuners supported (a lot of NTSC radio tuners probably need this change too). Add a new tuner-simple parameter, radio_if. It selects the 1st IF used for radio reception. The radio frequency setting code in tuner-simple now uses this field, instead of a special case select() block for each tuner with radio support. The tuner parameters for tuners that used a 33.3 MHz RIF now set radio_if to 1 in tuner-types.c. The Thomson DTT7612 gets radio_if = 2, also add has_tda9887 = 1 and fm_gain_normal = 1. Add some defines for tda9887 bits that control IF setting in radio mode. Add a new tda9887 config option, TDA9887_RIF_41_3, that selects a 41.3 MHz radio IF. Fix the way tda9887 radio options work. The driver was modifying the default radio mode config templates based on the TDA9887_XXXX flags. This means that _all_ tuners would get the same settings. If you had a one tuner than used TDA9887_GAIN_NORMAL and one that didn't, both would get the setting. Now the tda9987 driver just checks if tuner mode is radio and then applies the config settings directly to the data being sent, just like how all the TV mode settings already work. The PLL setting math is made a little more accurate. And a grammar error in a printk is fixed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5793): Tuner: remove hardware-specific info from public headerMichael Krufky
Move internal structures and debug macros to drivers/media/video/tuner-driver.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5753): Tuner: create struct tuner_operationsMichael Krufky
Move tuner callback function pointers out of struct tuner, into struct tuner_operations. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5741): Tuner: add release callbackMichael Krufky
Individual tuner drivers are now allocating memory themselves for their own private data structures. This changeset adds a release callback to the tuner operations, so that newer drivers that may require more complex data structures may release this private data themselves. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5719): Tuner: Move device-specific private data out of tuner structMichael Krufky
Create private data struct for device specific private data. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5563a): Add experimental support for tea5761 tunerMauro Carvalho Chehab
This driver were made based on tea5761 specs. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-01i2c: Cleanup the includes of <linux/i2c.h>Jean Delvare
Clean up the includes of <linux/i2c.h>. Only include this header file when we actually need it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-04-27V4L/DVB (5323): Updated support for tuner callbacksHartmut Hackmann
This change supplies a more generic version of the tuner callback. The tuner struct now has a function pointer int (*tuner_callback) (void *dev, int command, int arg) additionally to a int config parameter. both can be set through the TUNER_SET_TYPE_ADDR client call. Note that the meaning of the parameters depend on the tuner type. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5313): Added a config entry and a gpio function pointer to tuner structHartmut Hackmann
These entries mainly are to support configurations of the tda827x silicon tuner with a preamplifier. The values can be set throgh the attach inform or through the extended TUNER_SET_TYPE_ADDR client call. The function pointer will only be updated if the parameter is not NULL. Since a typecast is necessary to set the pointer, i added a typedef for this pointer (tuner_gpio_func_t) in tuner.h Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4934): Usbvision radio requires GainNormal at e registerMauro Carvalho Chehab
Adds an option to select GainNormal at tda9887 and make usbvision to use it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4533): Tda9887: add configuration setting for L standard PLL gatingTrent Piepho
Add a tuner config parameter for TDA9887, default_pll_gating_18, that changes the L standard PLL gating value from 36% to 0% (datasheet says 0%, tda9887 code says 18%). Turn this on for Microtune 4049FM5, as recomended by tuner datasheet. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4205): Merge tda9887 module into tuner.Mauro Carvalho Chehab
Most uses a tda988[5/6/7] IF demodulator as part of the device. Having this as a separate stuff makes harder to configure it, since there are some tda9887 options that are tuner-dependent and should be bound into tuner-types structures. This patch merges tda9887 module into tuner. More work is required to make tuner-types to properly use it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3919): V4l: rename TUNER_LG_TDVS_H062F to TUNER_LG_TDVS_H06XFMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3814): Add support for Samsung TCPG 6121P30A PAL tuner.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-21V4L/DVB (3445): LG TALN series: add PAL / SECAM supportMichael Krufky
- added tuner_lg_taln_pal_secam_ranges - renamed tuner 66 from TUNER_LG_NTSC_TALN_MINI to TUNER_LG_TALN - updated FlyTV mini Asus Digimatrix with new tuner Thanks-to: Rickard Osser <ricky@osser.se> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-08V4L/DVB (3411): FE6600 is a Thomson tunerMichael Krufky
- The tuner used in DViCO FusionHDTV DVB-T hybrid is made by Thomson - renamed tuner and dvb_pll structs accordingly Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-08V4L/DVB (3408): DViCO FusionHDTV DVB-T Hybrid and ZL10353-based FusionHDTV ↵Chris Pascoe
DVB-T Plus support Add support for the FE6600 tuner used on the DVB-T Hybrid board. Add support for the Zarlink ZL10353 DVB-T demodulator, which supersedes the MT352, used on the DViCO FusionHDTV DVB-T Hybrid and later model Plus boards. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-27V4L/DVB (3291): Added support for xc3028 analogue tuner (Hauppauge HVR900, ↵Markus Rechberger
Terratec Hybrid XS) Added support for xc3028 to v4l which adds support for: * Terratec Hybrid XS (analogue) * Hauppauge HVR 900 (analogue) Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-15V4L/DVB (3384): Separate tv & radio freqs, fix cb/freq transmit order for ↵Hans Verkuil
tuners that need this. - Moved MSP_SET_MATRIX to v4l2-common.h - Fix typos and integer overflows in tea5767.c - Split old freq field into a tv_freq and a radio_freq. Prevents that a radio tuner is initialized with a tv frequency or vice versa. - When switching to radio mode initialize the tuner with the last used radio frequency (this was already done for the TV mode). As a result of these changes the tuner module now remembers the last set radio and TV frequencies, which is what you would expect to happen. - Move out of range frequencies to the closest valid frequency as per v4l2 API spec. - Fix incorrect initial radio frequency (multiplier is 16000, not 16) - Add boundary check for out of range frequencies. - Use new flag to check if the order of the CB and freq. depends on the last set frequency. That is needed for some tuners or you can get static as a result. The flag is added for those tuners where I know that the datasheet indicates that this is necessary. - For this new check use the last set div value, not the last frequency as radio frequencies are always much higher due to the 16000 multiplier. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-13V4L/DVB (3363): Add support for Samsung tuner TCPN 2121P30AHans Verkuil
- Add support for Samsung tuner TCPN 2121P30A, used in Hauppauge PVR-500 cards. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-13V4L/DVB (3359): Redesign tuners struct for maximum flexibilityMichael Krufky
- Tunertype struct redefined to allow one or more tuner_params structs per tuner definition, one for each video standard. - Each tuner_params struct has an element containing an arbitrary amount of tuner_ranges. (this is needed for dvb tuners - to be handled later) - A tuner_range may be referenced by multiple tuner_params structs. There are many duplicates in here. Reusing tuner_range structs, rather than defining new ones for each tuner, will cut down on memory usage, and is preferred when possible. - tunertype struct contains an element, has_tda988x. We must set this for all tunertypes that contain a tda988x chip, and then we can remove this setting from the various card structs. - Improves tuners array memory usage efficiency. - Right now, all tuners are using the first tuner_params[] array element for analog mode. In the future, we will be merging similar tuner definitions together, such that each tuner definition will have a tuner_params struct for each available video standard. At that point, the tuner_params[] array element will be chosen based on the video standard in use. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-11V4L/DVB (3347): Fixes some bad global variablesHans Verkuil
- Debug global var is already used inside kernel, so renamed debug to tuner_debug for the tuner module Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-09V4L/DVB (3307): Some cleanups at I2C modulesMauro Carvalho Chehab
- i2c names shorten - removed obsoleted flags on newer modules - small cleanups Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3278): convert diagnostics over to the new v4l2-common.h macros.Hans Verkuil
- Convert diagnostics over to the new v4l2-common.h macros. - deprecated tuner_debug option, the new option is debug. - renamed cx25840_debug to debug. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3269): ioctls cleanups.Michael Krufky
- Now, all internal ioctls are at v4l2-common.h - removed unused ioctl at saa6752hs.h - all debug ioctl code moved to v4l2-common.c - removed duplicated stuff from other cards Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3245): Added some comments about multiple tuner support.Hans Verkuil
- Added some comments to make clearer how to use ioctl api to handle multiple tuners at the same board. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3196): correct Thomson DTT 761x frequency rangesMichael Krufky
- Corrected Thomson DTT 7611 tuner programming, based on spec sheet - renamed to Thomson DTT 761x - applies to DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A (DTT 7610 is similar, but slightly different programming) - corrected frequency ranges for analog and digital modes Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3167): added ntsc parameter to tuner and more standardized debugsMauro Carvalho Chehab
- Debug message changed to be coherent with other modules - added ntsc parameter - parameters moved to the beginning at the file - tuner_status moved to a better position. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3116): tda9887 improvements: better defaults, better configurability.Hans Verkuil
- Set the tuner takeover point to 0x10 for NTSC/radio and 0x14 for PAL/SECAM. - Allow override through TDA9887_SET_CONFIG - PAL-N belongs with PAL-BG as does PAL-H. PAL-Nc belongs to PAL-M - Add SECAM-BGH - Set video freq to cVideoIF_38_90 for DK standards. - Add cTunerGainLow to radio, change deemphasis to 75 for mono. - Add ntsc module param for 'M' and 'J' (Japanese) standards. - Fix module handling for 2.4. - Now able to select all standards through pal/secam/ntsc module options Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3062): Fix wrong tuner.h define for tuner 46Hans Verkuil
- Fix wrong tuner.h define for tuner 46 (it's a Panasonic, not a Microtune). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (1021): Tuner description now follows the same CodingStyle as the othersMauro Carvalho Chehab
- Tuner description now follows the same CodingStyle as the others Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-05[PATCH] i2c: Drop i2c_driver.{owner,name}, 5 of 11Laurent Riffard
We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the drivers/media/video and usb/media drivers. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-13[PATCH] v4l:: (936) Support for sabrent bt848 versionBill Pechter
Support for Sabrent bt848 version. Signed-off-by: Bill Pechter <pechter@gmail.com> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] V4L: 904: added dvb support for tda8275a philips tiger reference designHartmut Hackmann
Added dvb support for tda8275a (Philips Tiger reference design) Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 826: unify whitespacesNickolay V. Shmyrev
- Unify whitespaces. Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 806: add support for tda8275aHartmut Hackmann
- Add support for tda8275a Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 800: whitespace cleanupsMauro Carvalho Chehab
- Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 795: new config option for tda9887 to specifically set intercarrierNickolay V. Shmyrev
- New config option for tda9887 to specifically set intercarrier Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 712: added analog support for ati hdtv wonderKirk Lapray
- Added analog support for ATI HDTV Wonder Signed-off-by: Kirk Lapray <kirk.lapray@gmail.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 691: set if of tda8275 according to tv normNickolay V. Shmyrev
- Set IF of tda8275 according to tv norm. Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 685: update the tveeprom tuner list with the tunerHans Verkuil
- Update the tveeprom tuner list with the tuner Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 655: added support for the philips td1316 tunerHartmut Hackmann
- Added support for the Philips TD1316 tuner Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] v4l: include saa6588 compiler option and files / fixes comments on ↵Mauro Carvalho Chehab
tuner.h - Include saa6588 compiler option and files. - Fix comment on tuner.h - linux/utsname.h replaced by linux/version.h to compile on vanilla 2.6.13 Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] v4l: normalize whitespace and comments in tuner listsMauro Carvalho Chehab
- normalize whitespace and comments in tuner lists Signed-off-by: Philip Rowlands <phr@doc.ic.ac.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] v4l: common part Updates and tuner additionsMauro Carvalho Chehab
- Remove $Id CVS logs for V4L files - Included newer cards. - Added a new NEC protocol for ir based on pulse distance. - Enable ATSC support for DViCO FusionHDTV5 Gold. - Added tuner LG NTSC (TALN mini series). - Fixed tea5767 autodetection. - Resolve more tuner types. - Commented debug function removed from mainstream. - Remove comments from mainstream. Still on development tree. - linux/version dependencies removed. - BTSC Lang1 now is set to auto_stereo mode. - New tuner standby API. - i2c-core.c uses hexadecimal for the i2c address, so it should stay consistent. Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01[PATCH] V4L: Miscellaneous fixesMauro Carvalho Chehab
- Fixed some bttv card numbers. - BTTV and SAA7134 version numbers incremented to reflect changes. - pci_dma_supported() is called after pci_set_dma_mask() which already did check that for us. This patch removes the unneeded call to pci_dma_supported() at bttv-driver.c - Ensure a sufficient I2C bus idle time between 2 messages for saa7134-i2c.c - It is important to write at first to MO_GP3_IO for cx88-tvaudio.c - Use try_to_freeze() instead of refrigerator at msp3400.c - Recognizing the MFPE05-2 Tuner at tveeprom.c - Add new parameter to help identify radio chipsets at tuner module: show_i2c=1 will show 16 reading bytes from detected tuners. - BTTV does generate some Unimplemented IOCTL log at tuner module: 0x40046d11(dir=1,tp=0x6d,nr=17,sz=4) means that it is sending MSP3400 calls to non-msp3400 tuners. Warning eliminated. VIDIOSAUDIO is also called, so debug messages updated. It is still requiring IOCTL implementation. - Added two more tuners. - Add support for the SVideo input on the GDI Black Gold. Signed-off-by: Peter Missel <peter.missel@onlinehome.de> Signed-off-by: Graham Bevan <graham.bevan@ntlworld.com> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12[PATCH] v4l: I2C TunerMauro Carvalho Chehab
- Fixed a trouble on tuner-core that generates erros on computers with more than one TV card. - Rename tuner structures fields. - Tail spaces removed. - I2C cleanups and converged to a basic reference structure. - Removed unused structures. - Fix setting frequency on tda8290. - Added code for TEA5767 autodetection. - Standby mode support implemented. It is used to disable a non used tuner. Currenlty implemented on tea5767. - New macro: set_type disables other tuner when changing mode. - Some cleanups. - Use 50 kHz step when tunning radio for most tuners to improve precision. Signed-off-by: Fabien Perrot <perrot1983@yahoo.fr> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-By: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28[PATCH] v4l: tuner improvementsMauro Carvalho Chehab
*tuner-core.c: - some tuner_info msgs will be generated only if insmod opt tuner_debug enabled. - Implemented tuner-core support for VIDIO_S_TUNER to allow changing mono/stereo mode - Remove unneeded config options. - I2C_CLIENT_MULTI option removed. - support for Philips FMD12ME hybrid tuner - allow to initialize with another tuner - Move PHILIPS_FMD initialization code to set_type function, * tda8290: - Fix dumb error in tda8290 tunning. - Radio tuner uses high-precision step instead of 62.5 KHz. *tea5767.c: - tuner_info msgs will be generated only if insmod tuner option tuner_debug enabled. - some cleanups for better reading. - Radio tuner uses high-precision step instead of 62.5 KHz. - Changing radio mode stereo/mono for tea5767 working. *tuner-simple.c: - TNF9533-D/IF UHF fixup. - Radio tuners now uses high-precision step instead of 62.5 KHz. *mt20xx.c: - Radio tuner uses high-precision step instead of 62.5 KHz. *tda9887.c: - tab and blank spaces corrections. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>