aboutsummaryrefslogtreecommitdiff
path: root/include/scsi
AgeCommit message (Collapse)Author
2009-03-10[SCSI] fcoe: Out of order tx frames was causing several check condition SCSI ↵Vasu Dev
status frames followed by these errors in log. [sdp] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [sdp] Sense Key : Aborted Command [current] [sdp] Add. Sense: Data phase error This was causing some test apps to exit due to write failure under heavy load. This was due to a race around adding and removing tx frame skb in fcoe_pending_queue, Chris Leech helped me to find that brief unlocking period when pulling skb from fcoe_pending_queue in various contexts (fcoe_watchdog and fcoe_xmit) and then adding skb back into fcoe_pending_queue up on a failed fcoe_start_io could change skb/tx frame order in fcoe_pending_queue. Thanks Chris. This patch allows only single context to pull skb from fcoe_pending_queue at any time to prevent above described ordering issue/race by use of fcoe_pending_queue_active flag. This patch simplified fcoe_watchdog with modified fcoe_check_wait_queue by use of FCOE_LOW_QUEUE_DEPTH instead previously used several conditionals to clear and set lp->qfull. I think FCOE_MAX_QUEUE_DEPTH with FCOE_LOW_QUEUE_DEPTH will work better in re/setting lp->qfull and these could be fine tuned for performance. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] fcoe: ETH_P_8021Q is already in if_ether and fcoe is not using it anywayYi Zou
Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] libfc, fcoe: Remove unnecessary cast by removing inline wrapperRobert Love
Comment from "Andrew Morton <akpm@linux-foundation.org>" > +{ > + return (struct fcoe_softc *)lport_priv(lp); unneeded/undesirable cast of void*. There are probably zillions of instances of this - there always are. This whole inline function was unnecessary. The FCoE layer knows that it's data structure is stored in the lport private data, it can just access it from lport_priv(). Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] libfc, fcoe: Fix kerneldoc commentsRobert Love
1) Added '()' for function names in kerneldoc comments 2) Changed comment bookends from '**/' to '*/'. The comment on the the mailing list was that '**/' "is consistently unconventional. Not wrong, just odd." The Documentation/kernel-doc-nano-HOWTO.txt states that kerneldoc comment blocks should end with '**/' but most (if not all) instance I found under drivers/scsi/ were only using the '*/' so I converted to that style. 3) Removed incorrect linebreaks in kerneldoc comments where found 4) Removed a few unnecessary blank comment lines in kerneldoc comment blocks Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-06[SCSI] libfc: Cleanup libfc_function_template commentsRobert Love
Made the comments more like the comments for struct scsi_host_template. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-06[SCSI] libfc: Don't violate transport template for rogue port creationRobert Love
Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-06[SCSI] libfc: rport retry on LS_RJT from certain ELSChris Leech
This allows any rport ELS to retry on LS_RJT. The rport error handling would only retry on resource allocation failures and exchange timeouts. I have a target that will occasionally reject PLOGI when we do a quick LOGO/PLOGI. When a critical ELS was rejected, libfc would fail silently leaving the rport in a dead state. The retry count and delay are managed by fc_rport_error_retry. If the retry count is exceeded fc_rport_error will be called. When retrying is not the correct course of action, fc_rport_error can be called directly. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-06[SCSI] libfc, fcoe: fixed locking issues with lport->lp_mutex around ↵Vasu Dev
lport->link_status The fcoe_xmit could call fc_pause in case the pending skb queue len is larger than FCOE_MAX_QUEUE_DEPTH, the fc_pause was trying to grab lport->lp_muex to change lport->link_status and that had these issues :- 1. The fcoe_xmit was getting called with bh disabled, thus causing "BUG: scheduling while atomic" when grabbing lport->lp_muex with bh disabled. 2. fc_linkup and fc_linkdown function calls lport_enter function with lport->lp_mutex held and these enter function in turn calls fcoe_xmit to send lport related FC frame, e.g. fc_linkup => fc_lport_enter_flogi to send flogi req. In this case grabbing the same lport->lp_mutex again in fc_puase from fcoe_xmit would cause deadlock. The lport->lp_mutex was used for setting FC_PAUSE in fcoe_xmit path but FC_PAUSE bit was not used anywhere beside just setting and clear this bit in lport->link_status, instead used a separate field qfull in fc_lport to eliminate need for lport->lp_mutex to track pending queue full condition and in turn avoid above described two locking issues. Also added check for lp->qfull in fc_fcp_lport_queue_ready to trigger SCSI_MLQUEUE_HOST_BUSY when lp->qfull is set to prevent more scsi-ml cmds while lp->qfull is set. This patch eliminated FC_LINK_UP and FC_PAUSE and instead used dedicated fields in fc_lport for this, this simplified all related conditional code. Also removed fc_pause and fc_unpause functions and instead used newly added lport->qfull directly in fcoe. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-06[SCSI] libfc: Pass lport in exch_mgr_resetAbhijeet Joglekar
fc_exch_mgr structure is private to fc_exch.c. To export exch_mgr_reset to transport, transport needs access to the exch manager. Change exch_mgr_reset to use lport param which is the shared structure between libFC and transport. Alternatively, fc_exch_mgr definition can be moved to libfc.h so that lport can be accessed from mp*. Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-13[SCSI] iscsi_tcp: make padbuf non-staticKaren Xie
virt_to_page() call should not be used on kernel text and data addresses. virt_to_page() is used by sg_init_one(). So change padbuf to be allocated within iscsi_segment. Signed-off-by: Karen Xie <kxie@chelsio.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-06[SCSI] fc transport: restore missing dev_loss_tmo callback to LLDDJames Smart
When we reworked the transport for the rport lifetimes, in cases where the rport was reused as a container for tgt id bindings, we inadvertantly removed the callback to the driver indicating that dev_loss_tmo had fired. This patch restores that functionality. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] fcoe: Fibre Channel over EthernetRobert Love
Encapsulation protocol for running Fibre Channel over Ethernet interfaces. Creates virtual Fibre Channel host adapters using libfc. This layer is the LLD to the scsi-ml. It allocates the Scsi_Host, utilizes libfc for Fibre Channel protocol processing and interacts with netdev to send/receive Ethernet packets. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] libfc: A modular Fibre Channel libraryRobert Love
libFC is composed of 4 blocks supported by an exchange manager and a framing library. The upper 4 layers are fc_lport, fc_disc, fc_rport and fc_fcp. A LLD that uses libfc could choose to either use libfc's block, or using the transport template defined in libfc.h, override one or more blocks with its own implementation. The EM (Exchange Manager) manages exhcanges/sequences for all commands- ELS, CT and FCP. The framing library frames ELS and CT commands. The fc_lport block manages the library's representation of the host's FC enabled ports. The fc_disc block manages discovery of targets as well as handling changes that occur in the FC fabric (via. RSCN events). The fc_rport block manages the library's representation of other entities in the FC fabric. Currently the library uses this block for targets, its peer when in point-to-point mode and the directory server, but can be extended for other entities if needed. The fc_fcp block interacts with the scsi-ml and handles all I/O. Signed-off-by: Robert Love <robert.w.love@intel.com> [jejb: added include of delay.h to fix ppc64 compile prob spotted by sfr] Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] FC protocol definition header filesRobert Love
Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] add residual argument to scsi_execute and scsi_execute_reqFUJITA Tomonori
scsi_execute() and scsi_execute_req() discard the residual length information. Some callers need it. This adds residual argument (optional) to scsi_execute and scsi_execute_req. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] libiscsi_tcp: support padding offloadMike Christie
cxgb3i does not offload the processing of the header, but it will always process the padding. This patch adds a padding offload flag to detect when the LLD supports this. The patch also modifies the header processing so that we do not try to read/bypass the header dugest in the skb. cxgb3i will not include it with the header like with other offload cards. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] libiscsi: pass opcode into alloc_pdu calloutMike Christie
We do not need to allocate a itt for data_out, so this passes the opcode to the alloc_pdu callout. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] libiscsi: allow drivers to modify the itt sent to the targetMike Christie
bnx2i and cxgb3i need to encode LLD info in the itt so that the firmware/hardware can process the pdu. This patch allows the LLDs to encode info in the task->hdr->itt that they setup in the alloc_pdu callout (any resources that are allocated can be freed with the pdu in the cleanup_task callout). If the LLD encodes info in the itt they should implement a parse_pdu_itt callout. If parse_pdu_itt is not implemented libiscsi will do the right thing for the LLD. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] iscsi_tcp: split module into lib and lldMike Christie
As explained in the previous mails, cxgb3i needs iscsi_tcp's r2t/data_out and data_in procesing so this just moves functions that both drivers want to use to a new module libiscsi_tcp. The next patch will hook iscsi_tcp in. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] libiscsi: prepare libiscsi for new offload engines by modifying unsol ↵Mike Christie
data code cxgb3i offloads data transfers. It does not offload the entire scsi/iscsi procssing like qla4xxx and it does not offload the iscsi sequence processing like how bnx2i does. cxgb3i relies on iscsi_tcp for the seqeunce handling so this changes how we transfer unsolicitied data by adding a common r2t struct and helpers. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] iscsi_tcp: prepare helpers for LLDs that can offload some operationsMike Christie
cxgb3i is unlike qla4xxx and bnx2i in that it does not offload entire scsi commands or iscsi sequences. Instead it only offloads the transfer of a ISCSI DATA_IN pdu's data, the digests and padding. This patch fixes up the iscsi tcp recv path so that it exports its skb recv processing so cxgb3i and other drivers can call them. All they have to do is pass the function the skb with the hdr or data pdu header and this function will do the rest. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] remove timeout from struct scsi_deviceJames Bottomley
by removing the unused timeout parameter we ensure a compile failure if anyone is accidentally still using it rather than the block timeout. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-21[SCSI] fc_transport: fix old bug on bitflag definitionsJames Smart
When the fastfail flag was added, it did not account for the flags being bit fields. Correct the definition so there is no longer a conflict. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-27scsi: make sure that scsi_init_shared_tag_map() doesn't overwrite existing mapJens Axboe
Right now callers have to check whether scsi_host->bqt is already set up, it's much cleaner to just have scsi_init_shared_tag_map() does this check on its own. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-21[PATCH] don't mess with file in scsi_nonblockable_ioctl()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-13[SCSI] iscsi_tcp: return a descriptive error value during connection errorsMike Christie
The segment->done functions return a iscsi error value which gives a lot more info than conn failed, so this patch has us return that value. I also add a new one for xmit failures. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] libiscsi: rename host reset to target resetMike Christie
I had this in my patchset to add target reset support, but it got dropped due to patching conflicts. This initial patch just renames the function and users. We are actually just dropping the session, and so this does not have anything to do with the host exactly. It does for software iscsi because we allocate a host per session, but for cxgb3i this makes no sense. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] iscsi class: fix endpoint id handlingMike Christie
Some endpoint code was using unsigned int and some was using uint64_t. This converts it all to uint64_t. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] libiscsi: Support drivers initiating session removalMike Christie
If the driver knows when hardware is removed like with cxgb3i, bnx2i, qla4xxx and iser then we will want to remove the sessions/devices that are bound to that device before removing the host. cxgb3i and in the future bnx2i will remove the host and that will remove all the sessions on the hba. iser can call iscsi_kill_session when it gets an event that indicates that a hca is removed. And when qla4xxx is hooked in to the lib (it is only hooked into the class right now) it can call iscsi remove host like the partial offload card drivers. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] fc class: Add support for new transport errorsMike Christie
If the target is blocked and fast io fail tmo has not fired then we requeue with DID_TRANSPORT_DISRUPTED. Once that tmo fires we fail with DID_TRANSPORT_FAILFAST. v2 - seperate from "fc class: unblock target after calling terminate callback" to make it easier to review. - Add JamesS's ack from list. v2 - initial patch Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] scsi: add transport host byte errors (v3)Mike Christie
Currently, if there is a transport problem the iscsi drivers will return outstanding commands (commands being exeucted by the driver/fw/hw) with DID_BUS_BUSY and block the session so no new commands can be queued. Commands that are caught between the failure handling and blocking are failed with DID_IMM_RETRY or one of the scsi ml queuecommand return values. When the recovery_timeout fires, the iscsi drivers then fail IO with DID_NO_CONNECT. For fcp, some drivers will fail some outstanding IO (disk but possibly not tape) with DID_BUS_BUSY or DID_ERROR or some other value that causes a retry and hits the scsi_error.c failfast check, block the rport, and commands caught in the race are failed with DID_IMM_RETRY. Other drivers, may hold onto all IO and wait for the terminate_rport_io or dev_loss_tmo_callbk to be called. The following patches attempt to unify what upper layers will see drivers like multipath can make a good guess. This relies on drivers being hooked into their transport class. This first patch just defines two new host byte errors so drivers can return the same value for when a rport/session is blocked and for when the fast_io_fail_tmo fires. The idea is that if the LLD/class detects a problem and is going to block a rport/session, then if the LLD wants or must return the command to scsi-ml, then it can return it with DID_TRANSPORT_DISRUPTED. This will requeue the IO into the same scsi queue it came from, until the fast io fail timer fires and the class decides what to do. When using multipath and the fast_io_fail_tmo fires then the class can fail commands with DID_TRANSPORT_FAILFAST or drivers can use DID_TRANSPORT_FAILFAST in their terminate_rport_io callbacks or the equivlent in iscsi if we ever implement more advanced recovery methods. A LLD, like lpfc, could continue to return DID_ERROR and then it will hit the normal failfast path, so drivers do not have fully be ported to work better. The point of the patches is that upper layers will not see a failure that could be recovered from while the rport/session is blocked until fast_io_fail_tmo/recovery_timeout fires. V3 Remove some comments. V2 Fixed patch/diff errors and renamed DID_TRANSPORT_BLOCKED to DID_TRANSPORT_DISRUPTED. V1 initial patch. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] fc class: unblock target after calling terminate callback (take 2)Mike Christie
When we block a rport and the driver implements the terminate callback we will fail IO that was running quickly. However IO that was in the scsi_device/block queue sits there until the dev_loss_tmo fires, and this can make it look like IO is lost because new IO will get executed but that IO stuck in the blocked queue sits there for some time longer. With this patch when the fast io fail tmo fires, we will fail the blocked IO and any new IO. This patch also allows all drivers to partially support the fast io fail tmo. If the terminate io callback is not implemented, we will still fail blocked IO and any new IO, so multipath can handle that. This patch also allows the fc and iscsi classes to implement the same behavior. The timers are just unfornately named differently. This patch also fixes the problem where drivers were unblocking the target in their terminate callback, which was needed for rport removal, but for fast io fail timeout it would cause IO to bounce arround the scsi/block layer and the LLD queuecommand. And it for drivers that could have IO stuck but did not have a terminate callback the unblock calls in the class will fix them. v2. - fix up bit setting style to meet JamesS's pref. - Broke out new host byte error changes to make it easier to read. - added JamesS's ack from list. v1 - initial patch Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] Add helper code so transport classes/driver can control queueing (v3)Mike Christie
SCSI-ml manages the queueing limits for the device and host, but does not do so at the target level. However something something similar can come in userful when a driver is transitioning a transport object to the the blocked state, becuase at that time we do not want to queue io and we do not want the queuecommand to be called again. The patch adds code similar to the exisiting SCSI_ML_*BUSY handlers. You can now return SCSI_MLQUEUE_TARGET_BUSY when we hit a transport level queueing issue like the hw cannot allocate some resource at the iscsi session/connection level, or the target has temporarily closed or shrunk the queueing window, or if we are transitioning to the blocked state. bnx2i, when they rework their firmware according to netdev developers requests, will also need to be able to limit queueing at this level. bnx2i will hook into libiscsi, but will allocate a scsi host per netdevice/hba, so unlike pure software iscsi/iser which is allocating a host per session, it cannot set the scsi_host->can_queue and return SCSI_MLQUEUE_HOST_BUSY to reflect queueing limits on the transport. The iscsi class/driver can also set a scsi_target->can_queue value which reflects the max commands the driver/class can support. For iscsi this reflects the number of commands we can support for each session due to session/connection hw limits, driver limits, and to also reflect the session/targets's queueing window. Changes: v1 - initial patch. v2 - Fix scsi_run_queue handling of multiple blocked targets. Previously we would break from the main loop if a device was added back on the starved list. We now run over the list and check if any target is blocked. v3 - Rediff for scsi-misc. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits) [SCSI] zfcp: fix double dbf id usage [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev [SCSI] zfcp: fix erp list usage without using locks [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport [SCSI] zfcp: fix deadlock caused by shared work queue tasks [SCSI] zfcp: put threshold data in hba trace [SCSI] zfcp: Simplify zfcp data structures [SCSI] zfcp: Simplify get_adapter_by_busid [SCSI] zfcp: remove all typedefs and replace them with standards [SCSI] zfcp: attach and release SAN nameserver port on demand [SCSI] zfcp: remove unused references, declarations and flags [SCSI] zfcp: Update message with input from review [SCSI] zfcp: add queue_full sysfs attribute [SCSI] scsi_dh: suppress comparison warning [SCSI] scsi_dh: add Dell product information into rdac device handler [SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option [SCSI] qla2xxx: fix printk format warnings [SCSI] qla2xxx: Update version number to 8.02.01-k8. [SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing. [SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling. ...
2008-10-09block: unify request timeout handlingJens Axboe
Right now SCSI and others do their own command timeout handling. Move those bits to the block layer. Instead of having a timer per command, we try to be a bit more clever and simply have one per-queue. This avoids the overhead of having to tear down and setup a timer for each command, so it will result in a lot less timer fiddling. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-03[SCSI] fc_transport: Add an API to allow an LLD to create vportsAndrew Vasquez
There's already a fc_vport_termintate() call exported by the transport. This patch adds a symmetric call to the API to allow an NPIV-capable LLD to instantiate vports sans user intervention. Additional comments/updates: Re: scsi_fc_transport.txt Add a function prototype for fc_vport_terminate similar to what's done for fc_vport_create Re: fc_vport_create I recommend we pass the channel number in fc_vport_create rather than fixing it at zero. Also, ids->vport_type should be set to FC_PORTTYPE_NPIV prior to calling fc_vport_create. The comment is also meaningless. Added-by and Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] Update the SCSI state model to allow blocking in the created stateJames Bottomley
Brian King <brking@linux.vnet.ibm.com> reported that fibre channel devices can oops during scanning if their ports block (because the device goes from CREATED -> BLOCK -> RUNNING rather than CREATED -> BLOCK -> CREATED). Fix this by adding a new state: CREATED_BLOCK which can only transition back to CREATED and disallow the CREATED -> BLOCK transition. Now both the created and blocked states that the mid-layer recognises can include CREATED_BLOCK. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] add inline functions for recognising created and blocked statesJames Bottomley
The created and blocked states are very shortly going to correspond to mixed sdev_state states. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] scsi_netlink: Add transport and LLD recieve and event supportJames Smart
This patch adds scsi netlink recieve and event support for transport and scsi LLDD's. It is a reimplementation of the patch posted last week by David Somayajulu. http://marc.info/?l=linux-scsi&m=121745486221819&w=2 There are a few things done differently: - Transport support is included - Event delivery is included - The vendor message is now its own unique message type, considered part of the generic "SCSI Transport". - LLDD entry points are now registered rather than included in the scsi_host_template. Background: When I started to implement the event handler via template, I had to either: muck up scsi_add_host and scsi_remove_host; or have the event handler search all possible shosts. Neither was acceptable. Moving to a registration solves this, and also limits the scope of the changes to something that could be backported to a distro without breaking an already-released-distro kabi. However, I admit it isn't as elegant, as the passing of the LLDD host template in the registration and the complexity around dynamic add/remove shows. - The receive path was augmented to require a unique identifier for the LLDD before the message was allowed to be handed off to the driver. Given how quickly very fatal errors occur if there's msg mismatches (which I saw in testing my own tools :), I believe this to be a very good thing. The id plays off the vendor id scheme already introduced for the vendor unique event messages used by FC. Additionally, the id use as the basis of the registration/deregistration. - Send assist functions, for both the transport and LLDDs are included. [fujita.tomonori@lab.ntt.co.jp: fix missing cast] Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-29[SCSI] fix check of PQ and PDT bits for WLUNsJames Bottomley
For IBM z series certain LUNs can no longer be accessed. This is because kernel version 2.6.19 a check was introduced not to create a generic SCSI device for devices that return PQ=1 and PDT=0x1f. For WLUNs (see SAM-3, p. 41ff) generic SCSI devices should be created unconditionally without looking at the PQ bit, so add a check for WLUNs in with this test. Acked-by: Martin Petermann <martin@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-06[SCSI] sd: fix USB devices incorrectly reporting DIF supportHugh Dickins
Some USB devices set the protect bit in the INQUIRY data which currently causes the DIF code in sd to assume (incorrectly) that they support READ_CAPACITY(16). Fix this (only for the time being) by making sure we only believe the protect bit in the inquiry data if the device claims conformance to SCSI-3 or above. Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-05Re-introduce "[SCSI] extend the last_sector_bug flag to cover more sectors"Linus Torvalds
This re-introduces commit 2b142900784c6e38c8d39fa57d5f95ef08e735d8, which was reverted due to the regression it caused by commit fca082c9f1e11ec07efa8d2f9f13688521253f36. That regression was not root-caused by the original commit, it was just uncovered by it, and the real fix was done by Alan Stern in commit 580da34847488b404218d1d7f53b156f245f5555 ("Fix USB storage hang on command abort"). We can thus re-introduce the change that was confirmed by Alan Jenkins to be still required by his odd card reader. Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-04Revert "[SCSI] extend the last_sector_bug flag to cover more sectors"Linus Torvalds
This reverts commit 2b142900784c6e38c8d39fa57d5f95ef08e735d8, since it seems to break some other USB storage devices (at least a JMicron USB to ATA bridge). As such, while it apparently fixes some cardreaders, it would need to be made conditional on the exact reader it fixes in order to avoid causing regressions. Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-27[SCSI] extend the last_sector_bug flag to cover more sectorsAlan Jenkins
The last_sector_bug flag was added to work around a bug in certain usb cardreaders, where they would crash if a multiple sector read included the last sector. The original implementation avoids this by e.g. splitting an 8 sector read which includes the last sector into a 7 sector read, and a single sector read for the last sector. The flag is enabled for all USB devices. This revealed a second bug in other usb cardreaders, which crash when they get a multiple sector read which stops 1 sector short of the last sector. Affected hardware includes the Kingston "MobileLite" external USB cardreader and the internal USB cardreader on the Asus EeePC. Extend the last_sector_bug workaround to ensure that any access which touches the last 8 hardware sectors of the device is a single sector long. Requests are shrunk as necessary to meet this constraint. This gives us a safety margin against potential unknown or future bugs affecting multi-sector access to the end of the device. The two known bugs only affect the last 2 sectors. However, they suggest that these devices are prone to fencepost errors and that multi-sector access to the end of the device is not well tested. Popular OS's use multi-sector accesses, but they rarely read the last few sectors. Linux (with udev & vol_id) automatically reads sectors from the end of the device on insertion. It is assumed that single sector accesses are more thoroughly tested during development. Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] scsi_eh_prep_cmnd should save scmd->underflowAlan Stern
This patch (as1116) fixes a bug in scsi_eh_prep_cmnd() and scsi_eh_restore_cmnd(). These routines are supposed to save any values they change and restore them later, but someone forgot to save & restore scmd->underflow. This fixes part of the problem reported in Bugzilla #9638. [jejb: fix up rejections around DIF/DIX] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] Support devices with protection informationMartin K. Petersen
Implement support for DMA of protection information for devices that are data integrity capable. - Add support for mapping an extra scatter-gather list containing the protection information. - Allocate protection scsi_data_buffer if host is DIX (integrity DMA) capable. - Accessor function for checking whether a device has protection enabled. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] Command protection operationMartin K. Petersen
Controllers that support DMA of protection information must be told explicitly how to handle the I/O. The controller has no knowledge of the protection capabilities of the target device so this information must be passed in the scsi_cmnd. - The protection operation tells the HBA whether to generate, strip or verify protection information. - The protection type tells the HBA which layout the target is formatted with. This is necessary because the controller must be able to correctly interpret the included protection information in order to verify it. - When a scsi_cmnd is reused for error handling the protection operation must be cleared and saved while error handling is in progress. - prot_op and prot_type are placed in an existing hole in scsi_cmnd and don't cause the structure to grow. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] Host protection capabilitiesMartin K. Petersen
Controllers that support protection information must indicate this to the SCSI midlayer so that the ULD can prepare scsi_cmnds accordingly. This patch implements a host mask and various types of protection: - DIF Type 1-3 (between HBA and disk) - DIX Type 0-3 (between OS and HBA) The patch also allows the HBA to set the guard type to something different than the T10-mandated CRC. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] scsi_dh: attach to hardware handler from dm-mpathHannes Reinecke
multipath keeps a separate device table which may be more current than the built-in one. So we should make sure to always call ->attach whenever a multipath map with hardware handler is instantiated. And we should call ->detach on removal, too. [sekharan: update as per comments from agk] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] scsi_dh: add generic SPC-3 alua handlerHannes Reinecke
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>