aboutsummaryrefslogtreecommitdiff
path: root/include/scsi
AgeCommit message (Collapse)Author
2006-10-04Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits) [SCSI] Initial Commit of qla4xxx [SCSI] raid class: handle component-add errors [SCSI] SCSI megaraid_sas: handle thrown errors [SCSI] SCSI aic94xx: handle sysfs errors [SCSI] SCSI st: fix error handling in module init, sysfs [SCSI] SCSI sd: fix module init/exit error handling [SCSI] SCSI osst: add error handling to module init, sysfs [SCSI] scsi: remove hosts.h [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog [SCSI] megaraid_sas: adds tasklet for cmd completion [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error [SCSI] megaraid_sas: function pointer for disable interrupt [SCSI] megaraid_sas: frame count optimization [SCSI] megaraid_sas: FW transition and q size changes [SCSI] qla2xxx: Update version number to 8.01.07-k2. [SCSI] qla2xxx: Stall mid-layer error handlers while rport is blocked. [SCSI] qla2xxx: Add MODULE_FIRMWARE tags. [SCSI] qla2xxx: Add support for host port state FC transport attribute. [SCSI] qla2xxx: Add support for fabric name FC transport attribute. ...
2006-10-04[PATCH] helper function for retrieving scsi_cmd given host based block layer tagDavid C Somayajulu
This was necessitated by the need for a function to get back to a scsi_cmnd, when an hba the posts its (corresponding) completion interrupt with a block layer tag as its reference. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: David Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-09-30[PATCH] scsi: device_reprobe() can failAndrew Morton
device_reprobe() should return an error code. When it does so, scsi_device_reprobe() should propagate it back. Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30[PATCH] BLOCK: Make it possible to disable the block layer [try #6]David Howells
Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30[PATCH] Split struct request ->flags into two partsJens Axboe
Right now ->flags is a bit of a mess: some are request types, and others are just modifiers. Clean this up by splitting it into ->cmd_type and ->cmd_flags. This allows introduction of generic Linux block message types, useful for sending generic Linux commands to block devices. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-27[SCSI] scsi: device_reprobe() can failAndrew Morton
device_reprobe() should return an error code. When it does so, scsi_device_reprobe() should propagate it back. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-26[SCSI] sg: fixes for large page_sizeDouglas Gilbert
This sg driver patch addresses the problem with larger page sizes reported by Brian King in this post: http://marc.theaimsgroup.com/?l=linux-scsi&m=115867718623631&w=2 Some other related matters are also addressed. Some of these prevent oopses when the SG_SCATTER_SZ or scatter_elem_sz are set to inappropriate values. The scatter_elem_sz has been tested up to 4 MB which should make the largest data transfer with one SCSI command, 32 MB less one block, achievable with a relatively small number of elements in the scatter gather list. ChangeLog: - add scatter_elem_sz boot time parameter and sysfs module parameter that is initialized to SG_SCATTER_SZ - the driver will then adjust scatter_elem_sz to be the max(given(scatter_elem_sz), PAGE_SIZE) It will also round it up, if necessary, to be a power of two - clean up sg.h header, correct bad urls and some statements that are no longer valid - make the def_reserved_size sysfs module attribute writable Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-24[PATCH] SCSI gfp_t annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-23[SCSI] SPI transport class: misc DV fixesJames Bottomley
Key more of the domain validation settings off the inquiry data from the disk (in particular, don't try IU or DT unless the disk claims to support them. Also add a new dv_in_progress flag to prevent recursive DV. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23Merge mulgrave-w:git/scsi-misc-2.6James Bottomley
Conflicts: drivers/scsi/iscsi_tcp.c drivers/scsi/iscsi_tcp.h Pretty horrible merge between crypto hash consolidation and crypto_digest_...->crypto_hash_... conversion Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-19[HEADERS] One line per header in Kbuild files to reduce conflictsDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-07[SCSI] aci94xx: implement link rate settingJames Bottomley
This patch implements the ability to set the minimum and maximum linkrates for both libsas (for expanders) and aic94xx (for the host phys). It also tidies up the setting of the hardware min and max to make sure they're updated when the expander emits a change broadcast. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07[SCSI] scsi_transport_sas: make minimum and maximum linkrate settable quantitiesJames Bottomley
According to SPEC, the minimum_linkrate and maximum_linkrate should be settable by the user. This patch introduces a callback that allows the sas class to pass these settings on to the driver. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07[SCSI] SAS: consolidate linkspeed definitionsJames Bottomley
At the moment we have two separate linkspeed enumerations covering roughly the same values. This patch consolidates on a single one enum sas_linkspeed in scsi_transport_sas.h and uses it everywhere in the aic94xx driver. Eventually I'll get around to removing the duplicated fields in asd_sas_phy and sas_phy ... Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-04[SCSI] FC transport: Add dev_loss_tmo callbacks, and new fast_io_fail_tmo w/ ↵James Smart
callback This patch adds the following functionality to the FC transport: - dev_loss_tmo LLDD callback : Called to essentially confirm the deletion of an rport. Thus, it is called whenever the dev_loss_tmo fires, or when the rport is deleted due to other circumstances (module unload, etc). It is expected that the callback will initiate the termination of any outstanding i/o on the rport. - fast_io_fail_tmo and LLD callback: There are some cases where it may take a long while to truly determine device loss, but the system is in a multipathing configuration that if the i/o was failed quickly (faster than dev_loss_tmo), it could be redirected to a different path and completed sooner. Many thanks to Mike Reed who cleaned up the initial RFC in support of this post. The original RFC is at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115505981027246&w=2 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] SCSI & FC transport: extend event vendor id's to 64bitsJames Smart
During discussions with Mike Christie, I became convinced that we needed a larger vendor id. This patch extends the id from 32 to 64 bits. This applies on top of the prior patches that add SCSI transport events via netlink. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] SCSI and FC Transport: add netlink support for posting of transport ↵James Smart
events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] add failure return to scsi_init_shared_tag_map()James Bottomley
And use it in the stex driver. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] add refcouting around ctask usage in main IO patchMike Christie
It is possible that a ctask could be completing and getting cleaned up at the same time, we are finishing up the last data transfer. This could then result in the data transfer code using stale or invalid values. This patch adds a refcount to the ctask. When the count goes to zero then we know the transmit thread and recv thread or softirq are not touching it and we can safely release it. The eh should not need to grab a reference because it only cleans up a task if it has both the xmit mutex and recv lock (or recv side suspended). Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] libiscsi, iscsi_tcp, iscsi_iser: check that burst lengths are valid.Mike Christie
iSCSI RFC states that the first burst length must be smaller than the max burst length. We currently assume targets will be good, but that may not be the case, so this patch adds a check. This patch also moves the unsol data out offset to the lib so the LLDs do not have to track it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-31[SCSI] add shared tag map helpersJames Bottomley
This patch adds support for sharing tag maps at the host level (i.e. either every queue [LUN] has its own tag map or there's a single one for the entire host). This formulation is primarily intended to help single issue queue hardware, like the aic7xxx Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29[SCSI] aic94xx: new driverJames Bottomley
This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-27[SCSI] scsi_transport_sas: remove local_attached flagJames Bottomley
This flag denotes local attachment of the phy. There are two problems with it: 1) It's actually redundant ... you can get the same information simply by seeing whether a host is the phys parent 2) we condition a lot of phy parameters on it on the false assumption that we can only control local phys. I'm wiring up phy resets in the aic94xx now, and it will be able to reset non-local phys as well. I fixed 2) by moving the local check into the reset and stats function of the mptsas, since that seems to be the only HBA that can't (currently) control non-local phys. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-27Merge ../linux-2.6James Bottomley
2006-08-19[SCSI] fc transport: add fc_host system_hostname attribute and u64_to_wwn()James Smart
This patch updates the fc transport for the following: - Addition of a new attribute "system_hostname" which can be used to set the fully qualified hostname that the fc_host is attached to. The fc_host can then register this string as the FDMI-based host name attribute. Note: for NPIV, a fc_host could be associated with a system which is not the local system. - Add the inline function u64_to_wwn(), which is the inverse of the existing wwn_to_u64() function. - Slight reorg, just to keep dynamic attributes with each other, etc Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] fc transport: convert fc_host symbolic_name attribute to a dynamic ↵James Smart
attribute Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] Improve inquiry printingMatthew Wilcox
- Replace scsi_device_types array API with scsi_device_type function API. Gets rid of a lot of common code, as well as being easier to use. - Add the new device types in SPC4 r05a, and rename some of the older ones. - Reformat the printing of inquiry data; now fits on one line and includes PQ. I think I've addressed all the feedback from the previous versions. My current test box prints: scsi 2:0:1:0: Direct access HP 18.2G ATLAS10K3_18_SCA HP05 PQ: 0 ANSI: 2 Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] remove SCSI_STATE_ #definesChristoph Hellwig
These aren't used anymore since the field in scsi_cmnd where it was stored has been removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28[SCSI] iscsi bugfixes: reduce memory allocationsMike Christie
We currently try to allocate a max_recv_data_segment_length which can be very large (default is 64K), and common uses are up to 1MB. It is very very difficult to allocte this much contiguous memory and it turns out we never even use it. We really only need a couple of pages, so this patch has us allocates just what we know what we need today. Later if vendors start adding vendor specific data and we need to handle large buffers we can do this, but for the last 4 years we have not seen anyone do this or request it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28[SCSI] iscsi bugfixes: fix oops when iser is flushing ioMike Christie
When we enter recovery and flush the running commands we cannot freee the connection before flushing the commands. Some commands may have a reference to the connection that needs to be released before. iscsi_stop was forcing the term and suspend too early and was causing a oops in iser, so this patch removes those callbacks all together and allows the LLD to handle that detail. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28[SCSI] iscsi bugfixes: fix abort handlingMike Christie
Abort handler fixes. If a connection is dropped and reconnected while an abort is running then we should assume the recovery code will clean up the abort. Not doing so causes a oops. And if a command completes then we get the status for the abort, we do not need to call into the LLD to cleanup the resources. Doing this causes and oops in iser because it ends up freeing some resources twice. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28[SCSI] iscsi bugfixes: fix r2t handlingMike Christie
The iscsi tcp code can pluck multiple rt2s from the tasks's r2tqueue in the xmit code. This can result in the task being queued on the xmit queue but gettting completed at the same time. This patch fixes the above bug by making the fifo a list so we always remove the entry on the list del. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-12[SCSI] scsi_transport_sas: add expander backlinkJames Bottomley
This patch adds the ability to add a backlink to a particular port. The idea is to represent properly ports on expanders that are used specifically for linking to the parent device in the topology. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] hide EH backup data outside the scsi_cmndChristoph Hellwig
Currently struct scsi_cmnd has various fields that are used to backup original data after the corresponding fields have been overridden for EH commands. This means drivers can easily get at it and misuse it. Due to the old_ naming this doesn't happen for most of them, but two that have different names have been used wrong a lot (see previous patch). Another downside is that they unessecarily bloat the scsi_cmnd size. This patch moves them onstack in scsi_send_eh_cmnd to fix those two issues aswell as allowing future EH fixes like moving the EH command submissions to use SG lists like everything else. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] scsi_transport_sas: add unindexed portsJames Bottomley
Some SAS HBAs don't want to go to the trouble of tracking port numbers, so they'd simply like to say "add this port and give it a number". This is especially beneficial from the hotplug point of view, since tracking ports and the available number space can be a real pain. The current implementation uses an incrementing number per expander to add the port on. However, since there can never be more ports than there are phys, a later implementation will try to be more intelligent about this. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-04Merge git://git.infradead.org/hdrinstall-2.6Linus Torvalds
* git://git.infradead.org/hdrinstall-2.6: Remove export of include/linux/isdn/tpam.h Remove <linux/i2c-id.h> and <linux/i2c-algo-ite.h> from userspace export Restrict headers exported to userspace for SPARC and SPARC64 Add empty Kbuild files for 'make headers_install' in remaining arches. Add Kbuild file for Alpha 'make headers_install' Add Kbuild file for SPARC 'make headers_install' Add Kbuild file for IA64 'make headers_install' Add Kbuild file for S390 'make headers_install' Add Kbuild file for i386 'make headers_install' Add Kbuild file for x86_64 'make headers_install' Add Kbuild file for PowerPC 'make headers_install' Add generic Kbuild files for 'make headers_install' Basic implementation of 'make headers_check' Basic implementation of 'make headers_install'
2006-06-29[SCSI] iscsi: add async notification of session eventsMike Christie
This patch adds or modifies the transport class functions used to notify userspace of session state events. We modify the session addition up event and add a destruction event to notify userspace of session creation, relogin and destruction. And we modify the conn error event to be sent by broadcast since multiple listeners may want to listen for it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: pass target nr to session creationMike Christie
So the drivers do not use the channel numbers, but some do use the target numbers. We were just adding some goofy variable that just increases for the target nr. This is useless for software iscsi because it is always zero. And for qla4xxx the target nr is actually the index of the target/session in its FW or FLASH tables. We needed to expose this to userspace so apps could access those numbers so this patch just adds the target nr to the iscsi session creation functions. This way when qla4xxx's Hw thinks a session is at target nr 4 in its hw, it is exposed as that number in sysfs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: break up session creation into two stagesMike Christie
qla4xxx is initialized in two steps like other HW drivers. It allocates the host, sets up the HW, then adds the host. For iscsi part of HW setup is setting up persistent iscsi sessions. At that time, the interupts are off and the driver is not completely set up so we just want to allocate them. We do not want to add them to sysfs and expose them to userspace because userspace could try to do lots of fun things with them like scanning and at that time the driver is not ready. So this patch breakes up the session creation like other functions that use the driver model in two the alloc and add parts. When the driver is ready, it can then add the sessions and userspace can begin using them. This also fixes a bug in the addition error patch where we forgot to do a get on the session. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: rm channel usage from iscsiMike Christie
I do not remember what I was thinking when we added the channel as a argument to the session create function. It was probably due to too much cut and paste work from the FC transport class. The channel is meaningless for iscsi drivers so this patch drops its usage everywhere in the iscsi related code. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: fixup set/get param functionsMike Christie
Reduce duplication in the software iscsi_transport modules by adding a libiscsi function to handle the common grunt work. This also has the drivers return specifc -EXXX values for different errors so userspace can finally handle them in a sane way. Also just pass the sysfs buffers to the drivers so HW iscsi can get/set its string values, like targetname, and initiatorname. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: add target discvery event to transport classMike Christie
Patch from david.somayajulu@qlogic.com: Add target discovery event. We may have a setup where the iscsi traffic is on a different netowrk than the other network traffic. In this case we will want to do discovery though the iscsi card. This patch adds a event to the transport class that can be used by hw iscsi cards that support this. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28[SCSI] scsi_transport_sas: introduce a sas_port entityJames Bottomley
this patch introduces a port object, separates out ports and phys, with ports becoming the primary objects of the tree. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] Block I/O while SG reset operation in progress - the midlayer patchJames Smart
The scsi midlayer portion of the patch Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] sd/scsi_lib simplify sd_rw_intr and scsi_io_completionLuben Tuikov
This patch simplifies "good_bytes" computation in sd_rw_intr(). sd: "good_bytes" computation is always done in terms of the resolution of the device's medium, since after that it is the number of good bytes we pass around and other layers/contexts (as opposed ot sd) can translate that to their own resolution (block layer:512). It also makes scsi_io_completion() processing more straightforward, eliminating the 3rd argument to the function. It also fixes a couple of bugs like not checking return value, using "break" instead of "return;", etc. I've been running with this patch for some time now on a test (do-it-all) system. Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-22Merge branch 'master' into upstreamJeff Garzik
Conflicts: drivers/scsi/libata-core.c drivers/scsi/libata-scsi.c include/linux/pci_ids.h
2006-06-21Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits) [SCSI] 53c700: remove reliance on deprecated cmnd fields [SCSI] hptiop: don't use cmnd->bufflen [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver [SCSI] aacraid: small misc. cleanups [SCSI] aacraid: Update supported product information [SCSI] aacraid: Fix return code interpretation [SCSI] scsi_transport_sas: fix panic in sas_free_rphy [SCSI] remove RQ_SCSI_* flags [SCSI] remove scsi_request infrastructure [SCSI] mptfusion: change driver revision to 3.03.10 [SCSI] mptfc: abort of board reset leaves port dead requiring reboot [SCSI] mptfc: fix fibre channel infinite request/response loop [SCSI] mptfc: set fibre channel fw target missing timers to one second [SCSI] mptfusion: move fc event/reset handling to mptfc [SCSI] spi transport: don't allow dt to be set on SE or HVD buses [SCSI] aic7xxx: expose the bus setting to sysfs [SCSI] scsi: remove Documentation/scsi/cpqfc.txt [SCSI] drivers/scsi: Use ARRAY_SIZE macro [SCSI] Remove last page_address from dc395x.c [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver ... Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to the sparc interrupt cleanups)
2006-06-20Merge git://git.infradead.org/hdrcleanup-2.6Linus Torvalds
* git://git.infradead.org/hdrcleanup-2.6: (63 commits) [S390] __FD_foo definitions. Switch to __s32 types in joystick.h instead of C99 types for consistency. Add <sys/types.h> to headers included for userspace in <linux/input.h> Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.h Remove struct fddi_statistics from user view in <linux/if_fddi.h> Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390 Revert include/media changes: Mauro says those ioctls are only used in-kernel(!) Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h> Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> too Remove private struct dx_hash_info from public view in <linux/ext3_fs.h> Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h> Use __uXX types in <linux/divert.h> for struct divert_blk et al. Use __u32 for elf_addr_t in <asm-powerpc/elf.h>, not u32. It's user-visible. Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirely Use __uXX types in user-visible structures in <linux/nbd.h> Don't use 'u32' in user-visible struct ip_conntrack_old_tuple. Use __uXX types for S390 DASD volume label definitions which are user-visible S390 BIODASDREADCMB ioctl should use __u64 not u64 type. Remove unneeded inclusion of <linux/time.h> from <linux/ufs_fs.h> Fix private integer types used in V4L2 ioctls. ... Manually resolve conflict in include/linux/mtd/physmap.h
2006-06-18Add generic Kbuild files for 'make headers_install'David Woodhouse
This adds the Kbuild files listing the files which are to be installed by the 'headers_install' make target, in generic directories. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-17[SCSI] srp.h: Add I/O Class valuesRamachandra K
Add enum values for I/O Class values from rev. 10 and rev. 16a SRP drafts. The values are used to detect targets that implement obsolete revisions of SRP, so that the initiator can use the old format for port identifier when connecting to them. Signed-off-by: Ramachandra K <rkuchimanchi@silverstorm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>