aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2005-07-06[CRYPTO] Ensure cit_iv is aligned correctlyHerbert Xu
This patch ensures that cit_iv is aligned according to cra_alignmask by allocating it as part of the tfm structure. As a side effect the crypto layer will also guarantee that the tfm ctx area has enough space to be aligned by cra_alignmask. This allows us to remove the extra space reservation from the Padlock driver. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-06[CRYPTO] Add alignmask for low-level cipher implementationsHerbert Xu
The VIA Padlock device requires the input and output buffers to be aligned on 16-byte boundaries. This patch adds the alignmask attribute for low-level cipher implementations to indicate their alignment requirements. The mid-level crypt() function will copy the input/output buffers if they are not aligned correctly before they are passed to the low-level implementation. Strictly speaking, some of the software implementations require the buffers to be aligned on 4-byte boundaries as they do 32-bit loads. However, it is not clear whether it is better to copy the buffers or pay the penalty for unaligned loads/stores. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-06[CRYPTO] Add support for low-level multi-block operationsHerbert Xu
This patch adds hooks for cipher algorithms to implement multi-block ECB/CBC operations directly. This is expected to provide significant performance boots to the VIA Padlock. It could also be used for improving software implementations such as AES where operating on multiple blocks at a time may enable certain optimisations. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[PATCH] kprobes: fix namespace problem and sparc64 buildRusty Lynch
The following renames arch_init, a kprobes function for performing any architecture specific initialization, to arch_init_kprobes in order to cleanup the namespace. Also, this patch adds arch_init_kprobes to sparc64 to fix the sparc64 kprobes build from the last return probe patch. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05[PATCH] ppc32: add Freescale MPC885ADS board supportAndrei Konovalov
This patch adds the Freescale MPC86xADS board support. The supported devices are SMC UART and 10Mbit ethernet on SCC1. The manual for the board says that it "is compatible with the MPC8xxFADS for software point of view". That's why this patch extends FADS instead of introducing a new platform. FEC is not supported as the "combined FCC/FEC ethernet driver" driver by Pantelis Antoniou should replace the current FEC driver. Signed-off-by: Gennadiy Kurtsman <gkurtsman@ru.mvista.com> Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com> Acked-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-07-05[TCP]: Move to new TSO segmenting scheme.David S. Miller
Make TSO segment transmit size decisions at send time not earlier. The basic scheme is that we try to build as large a TSO frame as possible when pulling in the user data, but the size of the TSO frame output to the card is determined at transmit time. This is guided by tp->xmit_size_goal. It is always set to a multiple of MSS and tells sendmsg/sendpage how large an SKB to try and build. Later, tcp_write_xmit() and tcp_push_one() chop up the packet if necessary and conditions warrant. These routines can also decide to "defer" in order to wait for more ACKs to arrive and thus allow larger TSO frames to be emitted. A general observation is that TSO elongates the pipe, thus requiring a larger congestion window and larger buffering especially at the sender side. Therefore, it is important that applications 1) get a large enough socket send buffer (this is accomplished by our dynamic send buffer expansion code) 2) do large enough writes. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[TCP]: Fix __tcp_push_pending_frames() 'nonagle' handling.David S. Miller
'nonagle' should be passed to the tcp_snd_test() function as 'TCP_NAGLE_PUSH' if we are checking an SKB not at the tail of the write_queue. This is because Nagle does not apply to such frames since we cannot possibly tack more data onto them. However, while doing this __tcp_push_pending_frames() makes all of the packets in the write_queue use this modified 'nonagle' value. Fix the bug and simplify this function by just calling tcp_write_xmit() directly if sk_send_head is non-NULL. As a result, we can now make tcp_data_snd_check() just call tcp_push_pending_frames() instead of the specialized __tcp_data_snd_check(). Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[TCP]: Fix redundant calculations of tcp_current_mss()David S. Miller
tcp_write_xmit() uses tcp_current_mss(), but some of it's callers, namely __tcp_push_pending_frames(), already has this value available already. While we're here, fix the "cur_mss" argument to be "unsigned int" instead of plain "unsigned". Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[TCP]: Kill extra cwnd validate in __tcp_push_pending_frames().David S. Miller
The tcp_cwnd_validate() function should only be invoked if we actually send some frames, yet __tcp_push_pending_frames() will always invoke it. tcp_write_xmit() does the call for us, so the call here can simply be removed. Also, tcp_write_xmit() can be marked static. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[TCP]: Move __tcp_data_snd_check into tcp_output.cDavid S. Miller
It reimplements portions of tcp_snd_check(), so it we move it to tcp_output.c we can consolidate it's logic much easier in a later change. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[TCP]: Move send test logic out of net/tcp.hDavid S. Miller
This just moves the code into tcp_output.c, no code logic changes are made by this patch. Using this as a baseline, we can begin to untangle the mess of comparisons for the Nagle test et al. We will also be able to reduce all of the redundant computation that occurs when outputting data packets. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[TCP]: Fix quick-ack decrementing with TSO.David S. Miller
On each packet output, we call tcp_dec_quickack_mode() if the ACK flag is set. It drops tp->ack.quick until it hits zero, at which time we deflate the ATO value. When doing TSO, we are emitting multiple packets with ACK set, so we should decrement tp->ack.quick that many segments. Note that, unlike this case, tcp_enter_cwr() should not take the tcp_skb_pcount(skb) into consideration. That function, one time, readjusts tp->snd_cwnd and moves into TCP_CA_CWR state. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.David S. Miller
The ideal and most optimal layout for an SKB when doing scatter-gather is to put all the headers at skb->data, and all the user data in the page array. This makes SKB splitting and combining extremely simple, especially before a packet goes onto the wire the first time. So, when sk_stream_alloc_pskb() is given a zero size, make sure there is no skb_tailroom(). This is achieved by applying SKB_DATA_ALIGN() to the header length used here. Next, make select_size() in TCP output segmentation use a length of zero when NETIF_F_SG is true on the outgoing interface. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[NET]: Remove __ARGS from include/net/slhc_vj.hAlexey Dobriyan
I suspect "#define __ARGS(x) ()" was deprecated before I was born. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[SHAPER]: Switch to spinlocks.Christoph Hellwig
Dave, you were right and the sleeping locks in shaper were broken. Markus Kanet noticed this and also tested the patch below that switches locking to spinlocks. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2005-07-05[PKT_SCHED]: Cleanup qdisc creation and alignment macrosThomas Graf
Adds qdisc_alloc() to share code between qdisc_create() and qdisc_create_dflt(). Hides the qdisc alignment behind macros and makes use of them. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[PKT_SCHED]: Move sch_generic.c prototypes to correct header fileThomas Graf
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[NET]: Reduce size of sk_buff by 4 bytesThomas Graf
Reduce local_df to a bit field and ip_summed to a 2 bits field thus saving 13 bits. Move bit fields, packet type, and protocol into the spare area between the priority and the destructor. Saves 4 bytes on both, 32bit and 64bit architectures. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[NET]: Remove unused security member in sk_buffThomas Graf
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05[NET]: Fix signedness issues in net/core/filter.cPatrick McHardy
This is the code to load packet data into a register: k = fentry->k; if (k < 0) { ... } else { u32 _tmp, *p; p = skb_header_pointer(skb, k, 4, &_tmp); if (p != NULL) { A = ntohl(*p); continue; } } skb_header_pointer checks if the requested data is within the linear area: int hlen = skb_headlen(skb); if (offset + len <= hlen) return skb->data + offset; When offset is within [INT_MAX-len+1..INT_MAX] the addition will result in a negative number which is <= hlen. I couldn't trigger a crash on my AMD64 with 2GB of memory, but a coworker tried on his x86 machine and it crashed immediately. This patch fixes the check in skb_header_pointer to handle large positive offsets similar to skb_copy_bits. Invalid data can still be accessed using negative offsets (also similar to skb_copy_bits), anyone using negative offsets needs to verify them himself. Thanks to Thomas Vögtle <thomas.voegtle@coreworks.de> for verifying the problem by crashing his machine and providing me with an Oops. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-05Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
2005-07-04[SPARC64]: Do proper DMA IRQ syncing on TomatilloDavid S. Miller
This was the main impetus behind adding the PCI IRQ shim. In order to properly order DMA writes wrt. interrupts, you have to write to a PCI controller register, then poll for that bit clearing. There is one bit for each interrupt source, and setting this register bit tells Tomatillo to drain all pending DMA from that device. Furthermore, Tomatillo's with revision less than 4 require us to do a block store due to some memory transaction ordering issues it has on JBUS. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-04[SPARC64]: Add support for IRQ pre-handlers.David S. Miller
This allows a PCI controller to shim into IRQ delivery so that DMA queues can be drained, if necessary. If some bus specific code needs to run before an IRQ handler is invoked, the bus driver simply needs to setup the function pointer in bucket->irq_info->pre_handler and the two args bucket->irq_info->pre_handler_arg[12]. The Schizo PCI driver is converted over to use a pre-handler for the DMA write-sync processing it needs when a device is behind a PCI->PCI bus deeper than the top-level APB bridges. While we're here, clean up all of the action allocation and handling. Now, we allocate the irqaction as part of the bucket->irq_info area. There is an array of 4 irqaction (for PCI irq sharing) and a bitmask saying which entries are active. The bucket->irq_info is allocated at build_irq() time, not at request_irq() time. This simplifies request_irq() and free_irq() tremendously. The SMP dynamic IRQ retargetting code got removed in this change too. It was disabled for a few months now, and we can resurrect it in the future if we want. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-04[SPARC64/COMPAT]: Add some compat ioctl for ppdevRaphael Assenat
The following patch adds some ioctls to include/linux/compat_ioctl.h to allow using ppdev from the 32 bit user space on sparc64. This patch also adds the PPDEV option in the sparc64 menu, near Parallel printer support in the 'General machine setup' submenu. All those ioctls seem to be compatible, since (correct me if I'm wrong) they dont use the 'long' type. See include/linux/ppdev.h. The application I used to test the new ioctls only used the following: PPEXCL PPCLAIM PPNEGOT PPGETMODES PPRCONTROL PPWCONTROL PPDATADIR PPWDATA PPRDATA But I beleive that the other ioctls will work fine. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-04[PATCH] ARM: Fix new-ABI layout of struct stat64Russell King
Add __attribute__((packed)) to ensure that the stat64 structure is correctly laid out no matter which ABI the kernel is compiled for. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-04[PATCH] ARM: Change 'param_offset' to 'boot_params'Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-03Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-07-03[PATCH] ARM: Remove machine description macrosRussell King
Remove the pointless machine description macros, favouring C99 initialisers instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-03[PATCH] amd74xx: support MCP55 device IDsRob Punkunus
From: Rob Punkunus <rpunkunus@nvidia.com> Rob Punkunus recently submitted a patch to enable support for MCP51/MCP55 in the amd74xx driver. This patch was whitespace-corrupted and didn't apply to 2.6.12 since MCP51 support was merged in the 2.6.12-rc series. Gentoo would like to support this hardware for our upcoming release media, so I fixed the patch, and here it is :) Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-07-01[PATCH] PCI: clean up dynamic pci id logicGreg Kroah-Hartman
The dynamic pci id logic has been bothering me for a while, and now that I started to look into how to move some of this to the driver core, I thought it was time to clean it all up. It ends up making the code smaller, and easier to follow, and fixes a few bugs at the same time (dynamic ids were not being matched everywhere, and so could be missed on some call paths for new devices, semaphore not needed to be grabbed when adding a new id and calling the driver core, etc.) I also renamed the function pci_match_device() to pci_match_id() as that's what it really does. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-01[PATCH] PCI: Increase the number of PCI bus resourcesrajesh.shah@intel.com
This patch increases the number of resource pointers in the pci_bus structure. This is needed to store >4 resource ranges for host bridges and transparent PCI bridges. With this change, all PCI buses will have more resource pointers, but most PCI buses will only use the first 3 or 4, the remaining being NULL. The PCI core already deals with this correctly. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-01[PATCH] ARM: 2782/1: PXA27x MDREFR K0DB4 defineTodd Poynor
Patch from Todd Poynor Add definition of K0DB4 SDCLK<0,3> divide-by-4 control/status bit in the MDREFR register for Intel XScale PXA27x. Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-01[PATCH] ARM: 2781/2: PXA27x Standby mode take 2Todd Poynor
Patch from Todd Poynor Add support for PXA27x Standby mode, a low-power mode that retains CPU and some peripheral state (the existing "sleep" mode is a power-power mode that retains less state). Activated via: echo -n standby > /sys/power/state From: David Burrage and Todd Poynor Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-06-30Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
2005-06-30Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/paulus/ppc64-2.6Linus Torvalds
2005-06-30[PATCH] xtensa: Fix asm macroChris Zankel
Removed dead code in arch/xtensa/kernel/pci.c and use the pci_name() macro. Fixed an error in the delay asm macro: '1' is an invalid immediate value. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30[PATCH] xtensa: cleanups for errno and ipc.Chris Zankel
I noticed this because I was doing some more ipc cleanups and I did the original errno and ipc cleanups for other architectures, so it stuck out. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30[PATCH] x86: i8253/i8259A lock cleanupIngo Molnar
Introduce proper declarations for i8253_lock and i8259A_lock. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30[PATCH] s390: fix finish_arch_switchHeiko Carstens
Commit 4866cde064afbb6c2a488c265e696879de616daa requires finish_arch_switch to have only one parameter instead of two. Also fix another compile error (double declaration of account_system_vtime) if CONFIG_VIRT_CPU_ACCOUNTING is not defined. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30[PATCH] ARM: Don't try to send a signal to pid0Russell King
If we receive an unrecognised abort during boot, don't try to send a signal to pid0, but instead report the current state. This leads to less confusing debug reports. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Greg KH
2005-06-29[PATCH] driver core: change bus_rescan_devices to return voidGreg Kroah-Hartman
No one was looking at the return value of bus_rescan_devices, and it really wasn't anything that anyone in the kernel would ever care about. So change it which enabled some counting code to be removed also. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-29[PATCH] driver core: add bus_find_device & driver_find_device functionsCornelia Huck
Add bus_find_device() and driver_find_device() which allow searching for a device in the bus's resp. the driver's klist and obtain a reference on it. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-30[PATCH] ppc64: Replace custom locking code with a spinlockMichael Ellerman
The hvlpevent_queue (formally ItLpQueue) has a member called xInUseWord which is used for serialising access to the queue. Because it's a word (ie. 32 bit) there's a custom 32-bit version of test_and_set_bit() or thereabouts in ItLpQueue.c. The xInUseWord is not shared with they hypervisor, so we can replace it with a spinlock and remove the custom code. There is also another locking mechanism (ItLpQueueInProcess). This is redundant because it's only manipulated while the lock's held. Remove it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30[PATCH] ppc64: Simplify counting of lpevents, remove lpevent_count from pacaMichael Ellerman
Currently there's a per-cpu count of lpevents processed, a per-queue (ie. global) total count, and a count by event type. Replace all that with a count by event for each cpu. We only need to add it up int the proc code. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30[PATCH] ppc64: Don't count number of events processed for callerMichael Ellerman
Currently we count the number of lpevents processed in 3 seperate places. One of these counters is never read, so just remove it. This means hvlpevent_queue_process() no longer needs to return the number of events processed. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-06-30[PATCH] ppc64: Rename ItLpQueue_* functions to hvlpevent_queue_*Michael Ellerman
Now that we've renamed the xItLpQueue structure, rename the functions that operate on it also. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>