aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2005-06-21[PATCH] I2C: add i2c driver for TPS6501xDavid Brownell
This adds an I2C driver for the TPS6501x series of power management chips. It's used on many OMAP based boards, and this driver has been widely used in the Linux-OMAP trees over the last year or so. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21[PATCH] I2C: i2c-vid.h: Support for VID to reg conversionSebastian Witt
Adds conversion from VID (mV) to register value. Used by the atxp1 I2C module. Removed uneeded switch case. Signed-off-by: Sebastian Witt <se.witt@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21[PATCH] I2C: Kill address ranges in non-sensors i2c chip driversJean Delvare
Some months ago, you killed the address ranges mechanism from all sensors i2c chip drivers (both the module parameters and the in-code address lists). I think it was a very good move, as the ranges can easily be replaced by individual addresses, and this allowed for significant cleanups in the i2c core (let alone the impressive size shrink for all these drivers). Unfortunately you did not do the same for non-sensors i2c chip drivers. These need the address ranges even less, so we could get rid of the ranges here as well for another significant i2c core cleanup. Here comes a patch which does just that. Since the process is exactly the same as what you did for the other drivers set already, I did not split this one in parts. A documentation update is included. The change saves 308 bytes in the i2c core, and an average 1382 bytes for chip drivers which use I2C_CLIENT_INSMOD, 126 bytes for those which do not. This change is required if we want to merge the sensors and non-sensors i2c code (and we want to do this). Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/Documentation/i2c/writing-clients ===================================================================
2005-06-21[PATCH] Two small fixes for md verion-1 superblocks.NeilBrown
1/ Must typecast int to (sector_t) before inverting or we might not invert enough bits. 2/ When "bitmap_offset" was added to mdp_superblock_1, we didn't increase the count of words-used (96 to 100). Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] md: allow md to update multiple superblocks in parallel.NeilBrown
currently, md updates all superblocks (one on each device) in series. It waits for one write to complete before starting the next. This isn't a big problem as superblock updates don't happen that often. However it is neater to do it in parallel, and if the drives in the array have gone to "sleep" after a period of idleness, then waking them is parallel is faster (and someone else should be worrying about power drain). Futher, we will need parallel superblock updates for a future patch which keeps the intent-logging bitmap near the superblock. Also remove the silly code that retired superblock updates 100 times. This simply never made sense. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] md: allow md intent bitmap to be stored near the superblock.NeilBrown
This provides an alternate to storing the bitmap in a separate file. The bitmap can be stored at a given offset from the superblock. Obviously the creator of the array must make sure this doesn't intersect with data.... After is good for version-0.90 superblocks. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] md: fix deadlock due to md thread processing delayed requests.NeilBrown
Before completing a 'write' the md superblock might need to be updated. This is best done by the md_thread. The current code schedules this up and queues the write request for later handling by the md_thread. However some personalities (Raid5/raid6) will deadlock if the md_thread tries to submit requests to its own array. So this patch changes things so the processes submitting the request waits for the superblock to be written and then submits the request itself. This fixes a recently-created deadlock in raid5/raid6 Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] md: optimise reconstruction when re-adding a recently failed drive.NeilBrown
When an array is degraded, bit in the intent-bitmap are never cleared. So if a recently failed drive is re-added, we only need to reconstruct the block that are still reflected in the bitmap. This patch adds support for this re-adding. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] md: raid1 support for bitmap intent loggingNeilBrown
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] md: enable the bitmap write-back daemon and wait for it.NeilBrown
Currently we don't wait for updates to the bitmap to be flushed to disk properly. The infrastructure all there, but it isn't being used.... A separate kernel thread (bitmap_writeback_daemon) is needed to wait for each page as we cannot get callbacks when a page write completes. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] md: optimised resync using Bitmap based intent loggingNeilBrown
With this patch, the intent to write to some block in the array can be logged to a bitmap file. Each bit represents some number of sectors and is set before any update happens, and only cleared when all writes relating to all sectors are complete. After an unclean shutdown, information in this bitmap can be used to optimise resync - only sectors which could be out-of-sync need to be updated. Also if a drive is removed and then added back into an array, the recovery can make use of the bitmap to optimise reconstruction. This is not implemented in this patch. Currently the bitmap is stored in a file which must (obviously) be stored on a separate device. The patch only provided infrastructure. It does not update any personalities to bitmap intent logging. Md arrays can still be used with no bitmap file. This patch has minimal impact on such arrays. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] md: improve the interface to sync_requestNeilBrown
1/ change the return value (which is number-of-sectors synced) from 'int' to 'sector_t'. The number of sectors is usually easily small enough to fit in an int, but if resync needs to abort, it may want to return the total number of remaining sectors, which could be large. Also errors cannot be returned as negative numbers now, so use 0 instead 2/ Add a 'skipped' return parameter to allow the array to report that it skipped the sectors. This allows md to take this into account in the speed calculations. Currently there is no important skipping, but the bitmap-based-resync that is coming will use this. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] md: improve locking on 'safemode' and move superblock writesNeilBrown
When md marks the superblock dirty before a write, it calls generic_make_request (to write the superblock) from within generic_make_request (to write the first dirty block), which could cause problems later. With this patch, the superblock write is always done by the helper thread, and write request are delayed until that write completes. Also, the locking around marking the array dirty and writing the superblock is improved to avoid possible races. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] fbdev: stack reductionJames Simmons
Shrink the stack when calling the drawing alignment functions. Signed-off-by: James Simmons <jsimmons@www.infradead.org> Cc: "Antonino A. Daplas" <adaplas@hotpop.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] New framebuffer fonts + updated 12x22 font availableJurriaan
Improve the fonts for use with the framebuffer. I've added all the characters marked 'FIXME' in the sun12x22 font and created a 10x18 font (based on the sun12x22 font) and a 7x14 font (based on the vga8x16 font). This patch is non-intrusive, no options are enabled by default so most users won't notice a thing. I am placing my changes under the GPL, however, I've not seen any copyright notices on the sun12x22 font and the vga8x16 font which I derived my new fonts from so I don't know what the copyright status is. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] fbdev: new pci id for chipsfbJames Simmons
Patch adds pci ID for CT 69000 chipset. Signed-off-by: James Simmons <jsimmons@www.infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] Framebuffer driver for Arc LCD boardJaya Kumar
Add support for the Arc monochrome LCD board. The board uses KS108 controllers to drive individual 64x64 LCD matrices. The board can be paneled in a variety of setups such as 2x1=128x64, 4x4=256x256 and so on. The board/host interface is through GPIO. Signed-off-by: Jaya Kumar <jayalk@intworks.biz> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: <linux-fbdev-devel@lists.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] fbdev: iomove removalJames Simmons
Since no one is using the inbuf, outbuf of struct fb_pixmap I removed their use in the framebuffer console. The idea is instead move the pixmap functionality below the accelerated functions intead of on top as the way it is now. If there is no objection please apply. This is against Linus latestr GIT tree. Thank you. Signed-off-by: James Simmons <jsimmons@www.infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] autofs4: subversion bump to identify these changesIan Kent
Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] uml: make hw_controller_type->release exist only for archs needing itPaolo 'Blaisorblade' Giarrusso
With Chris Wedgwood <cw@f00f.org> As suggested by Chris, we can make the "just added" method ->release conditional to UML only (better: to archs requesting it, i.e. only UML currently), so that other archs don't get this unneeded crud, and if UML won't need it any more we can kill this. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> CC: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] uml: add and use generic hw_controller_type->releasePaolo 'Blaisorblade' Giarrusso
With Chris Wedgwood <cw@f00f.org> Currently UML must explicitly call the UML-specific free_irq_by_irq_and_dev() for each free_irq call it's done. This is needed because ->shutdown and/or ->disable are only called when the last "action" for that irq is removed. Instead, for UML shared IRQs (UML IRQs are very often, if not always, shared), for each dev_id some setup is done, which must be cleared on the release of that fd. For instance, for each open console a new instance (i.e. new dev_id) of the same IRQ is requested(). Exactly, a fd is stored in an array (pollfds), which is after read by a host thread and passed to poll(). Each event registered by poll() triggers an interrupt. So, for each free_irq() we must remove the corresponding host fd from the table, which we do via this -release() method. In this patch we add an appropriate hook for this, and remove all uses of it by pointing the hook to the said procedure; this is safe to do since the said procedure. Also some cosmetic improvements are included. This is heavily based on some work by Chris Wedgwood, which however didn't get the patch merged for something I'd call a "misunderstanding" (the need for this patch wasn't cleanly explained, thus adding the generic hook was felt as undesirable). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> CC: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] m32r: Use asm-generic/div64.hHirokazu Takata
The current include/asm-m32r/div64.h of 2.6.12-rc5 looks buggy. Here is a patch for updating it to use asm-generic/div64.h for m32r like other architectures. Signed-off-by: Hitoshi Yamamoto <hitoshiy@isl.melco.co.jp> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] m32r: Remove include/asm-m32r/m32102peri.hHirokazu Takata
This patch removes an obsolete header file include/asm-m32r/m32102peri.h. In this header, there are some undesirable single character types, like V. And the header is almost no longer used. Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] m32r: Support M3A-2170(Mappi-III) platformHirokazu Takata
This patchset is for supporting a new m32r platform, M3A-2170(Mappi-III) evaluation board. An M32R chip multiprocessor is equipped on the board. http://http://www.linux-m32r.org/eng/platform/platform.html * arch/m32r/Kconfig: Support Mappi-III platform. * arch/m32r/kernel/Makefile: ditto. * arch/m32r/kernel/io_mappi3.c: ditto. * arch/m32r/kernel/setup.c: ditto. * arch/m32r/kernel/setup_mappi3.c: ditto. * include/asm-m32r/m32102.h: ditto. * include/asm-m32r/m32r.h: ditto. * include/asm-m32r/mappi3/mappi3_pld.h: ditto. * include/asm-m32r/ide.h: CF support for Mappi-III. * arch/m32r/kernel/setup_mappi3.c: ditto. * arch/m32r/mappi3/defconfig.smp: A default config file for Mappi-III. * arch/m32r/mappi3/dot.gdbinit: A default .gdbinit file for Mappi-III. * arch/m32r/boot/compressed/m32r_sio.c: Modified for Mappi-III - At boot time, m32r-g00ff bootloader makes MMU off for Mappi-III, on the contrary it makes MMU on for Mappi-II. * arch/m32r/kernel/io_mappi2.c: Update comments. * arch/m32r/kernel/setup_mappi2.c: ditto. Signed-off-by: Mamoru Sakugawa <sakugawa@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ioc4: PCI bus speed detectionBrent Casavant
Several hardware features of SGI's IOC4 I/O controller chip require timing-related driver calculations dependent upon the PCI bus speed. This patch enables the core IOC4 driver code to detect the actual bus speed and store a value that can later be used by the IOC4 subdrivers as needed. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Acked-by: Pat Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ioc4: Core driver rewriteBrent Casavant
This series of patches reworks the configuration and internal structure of the SGI IOC4 I/O controller device drivers. These changes are motivated by several factors: - The IOC4 chip PCI resources are of mixed use between functions (i.e. multiple functions are handled in the same address range, sometimes within the same register), muddling resource ownership and initialization issues. Centralizing this ownership in a core driver is desirable. - The IOC4 chip implements multiple functions (serial, IDE, others not yet implemented in the mainline kernel) but is not a multifunction PCI device. In order to properly handle device addition and removal as well as module insertion and deletion, an intermediary IOC4-specific driver layer is needed to handle these operations cleanly. - All IOC4 drivers are currently enabled by a single CONFIG value. As not all systems need all IOC4 functions, it is desireable to enable these drivers independently. - The current IOC4 core driver will trigger loading of all function-level drivers, as it makes direct calls to them. This situation should be reversed (i.e. function-level drivers cause loading of core driver) in order to maintain a clear and least-surprise driver loading model. - IOC4 hardware design necessitates some driver-level dependency on the PCI bus clock speed. Current code assumes a 66MHz bus, but the speed should be autodetected and appropriate compensation taken. This patch series effects the above changes by a newly and better designed IOC4 core driver with which the function-level drivers can register and deregister themselves upon module insertion/removal. By tracking these modules, device addition/removal is also handled properly. PCI resource management and ownership issues are centralized in this core driver, and IOC4-wide configuration actions such as bus speed detection are also handled in this core driver. This patch: The SGI IOC4 I/O controller chip implements multiple functions, though it is not a multi-function PCI device. Additionally, various PCI resources of the IOC4 are shared by multiple hardware functions, and thus resource ownership by driver is not clearly delineated. Due to the current driver design, all core and subordinate drivers must be loaded, or none, which is undesirable if not all IOC4 hardware features are being used. This patch reorganizes the IOC4 drivers so that the core driver provides a subdriver registration service. Through appropriate callbacks the subdrivers can now handle device addition and removal, as well as module insertion and deletion (though the IOC4 IDE driver requires further work before module deletion will work). The core driver now takes care of allocating PCI resources and data which must be shared between subdrivers, to clearly delineate module ownership of these items. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Acked-by: Pat Gefre <pfg@sgi.com Acked-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] mips: add vr41xx gpio supportYoichi Yuasa
Add vr41xx gpio support. Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: allow build with no PCIStephen Rothwell
This patch allows iSeries to build with CONFIG_PCI=n. This is useful for partitions that have only virtual I/O. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: tidy up irq code after mergeStephen Rothwell
This patch just removes some dead code, fixes messages that referred to the file this code used to be in and inserts XmPciLpEvent_init into its caller. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: irq simple cleanupsStephen Rothwell
This patch is just simple cleanups to the iSeries irq code. - whitespace and comments - rearrange some functions to avoid forward declarations - remove XmPciLpEvent.h as its functions were declared elsewhere - remove decaration of function that no longer exists No semantic changes. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: remove some more members of iSeries_Device_NodeStephen Rothwell
The AgentId, PhbId, FrameId, CardLocation and Location members of iSeries_Device_Node are stored early in the boot process just so that a message about the device can be printed later in the boot process. Remove them and construct the message by doing the VPD parsing at the time the message is printed. Also remove a few unused defines in iSeries_VpdInfo.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: remove IoRetry from iSeries_Device_NodeStephen Rothwell
The IoRetry member of iSeries_Devide_Node is really only used locally, so remove it and replace it with a local variable. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: iSeries_pci.h cleanupsStephen Rothwell
Remove no longer used things from iSeries_pci.h. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: iommu.h cleanupsStephen Rothwell
The iommu_table_cb structure is iSeries specific, so move it to the header file that declares the function we pass it to. vio_tce_table and iommu_setup_iSeries no longer exist, so remove their declarations. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: remove iSeries_pci_reset.cStephen Rothwell
The file arch/ppc64/kernel/iSeries_pci_reset contains only one function that is not use anywhere (any more). Remove it. This function is the only user of the ReturnCode member of iSeries_Device_Node, so remove that as well. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: misc header cleanupsStephen Rothwell
Last of this round of the iSeries header cleanups - don't have two defines for the same thing (HvMaxArchitectedLps and HvMaxArchitectedVirtualLans) - HvCallSc.h only needs linux/types.h - remove unused struct definition - add "extern" to some more function declarations Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: tidy up some includes and HvCall.hStephen Rothwell
This patch removes some unused bits from HvCall.h and some unneeded #includes from other files. Also includes ItLpQueue.h in paca.h in preference to a stub declaration of struct ItLpQueue. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: cleanup ItLpQueue.hStephen Rothwell
Just white space cleaups and move process_iSeries_events into its only caller. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: remove HvCallCfg.hStephen Rothwell
Now that the only users of things in HvCallCfg.h are in HvLpConfig.h, merge in the bit we need and remove HvCallCfg.h. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: eliminate some unused inline functionsStephen Rothwell
This patch removes from the iSeries header files a large number of inline functions that are not used. It also changes the only caller of a HvCallCfg function that is outside HvLpConfig.h to its equivalent HvLpConfig function and no longer includes HvCallCfg.h where it is not needed. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: remove LparData.hStephen Rothwell
include/asm-ppc64/iSeries/LparData.h just included a whole lot of other files to declare variables that would be better declared in those other files. So, remove it. This will reduce that number of things needed to be included in most cases to access the relevant variables. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: obvious code simplificationsStephen Rothwell
This patch does some obvious code cleanups in the iSeries headers files. - simplifies the bodies of lots of inline functions - parenthesises a macros result - removes C++ wrapping - adds "extern" to some function declarations There are no semantic changes. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: more header file white space cleanupsStephen Rothwell
This patch just contains white space and comment cleanups in the iSeries headers files. There are no semantic changes. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: header file white space cleanupsStephen Rothwell
This patch just contains white space and comment cleanups in the iSeries headers files. There are no semantic changes. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64 iSeries: remove iSeries_proc.hStephen Rothwell
include/asm-ppc64/iSeries/iSeries_proc.h just contains a declaration of a function that no longer exists. Remove it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc64: Abolish ioremap_mmDavid Gibson
Currently ppc64 has two mm_structs for the kernel, init_mm and also ioremap_mm. The latter really isn't necessary: this patch abolishes it, instead restricting vmallocs to the lower 1TB of the init_mm's range and placing io mappings in the upper 1TB. This simplifies the code in a number of places and eliminates an unecessary set of pagetables. It also tweaks the unmap/free path a little, allowing us to remove the unmap_im_area() set of page table walkers, replacing them with unmap_vm_area(). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc32: Clean up NUM_TLBCAMS usage for Freescale Book-E PPC'sKumar Gala
Made the number of TLB CAM entries private and converted the board consumers to use num_tlbcam_entries which is setup at boot time from configuration registers. This way the only consumers of the #define NUM_TLBCAMS are the arrays used to manage the TLB. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc32: Added support for all MPC8548 internal interruptsKumar Gala
The MPC8548 has 48 internal interrupts and 12 external interrupts. The previous generation PowerQUICC III devices only had 32 internal and 12 external interrupts on the primary interrupt controller. Expanded the number of internal interrupts to 48 for all PowerQUICC III processors and moved the interrupt numbers for the external after the 48 internal interrupt lines, rather than putting the 12 new internal interrupts at the end and ifdef'ng the whole mess. As parted of this created a macro which represents the internal interrupt senses since they are the same on all PQ3 processors. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc32: Converted MPC10X bridge to use platform devices instead of OCPKumar Gala
Converted the MPC10x bridge support (used by MPC10x and 8240/1/5) to used the standard platform device model. Signed-off-by: Matt McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] ppc32: Added preliminary support for the MPC8548 CDS boardKumar Gala
Adds support for using the MPC8548 processor on the CDS reference board. Currently all the major busses (PCI, PCI-X, PCI-Express, sRIO) and eTSEC3 and eTSEC4 are not supported. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>