aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2006-11-01Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix warning in mips-boards generic PCI [MIPS] SMTC: Synchronize cp0 counters on bootup. [MIPS] SMTC: Fix crash if # of TC's > # of VPE's after pt_regs irq cleanup. [MIPS] 16K & 64K page size fixes
2006-11-01[MIPS] 16K & 64K page size fixesRalf Baechle
Derived from Peter Watkins <treestem@gmail.com>'s work. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-01i386: clean up io-apic accessesLinus Torvalds
This is preparation for fixing the ordering of the accesses that got broken by the commit cf4c6a2f27f5db810b69dcb1da7f194489e8ff88 when factoring out the "common" io apic routing entry accesses. Move the accessor function (that were only used by io_apic.c) out of a header file, and use proper memory-mapped accesses rather than making up our own "volatile" pointers. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Make alignment exception always check exception table [POWERPC] Disallow kprobes on emulate_step and branch_taken [POWERPC] Make mmiowb's io_sync preempt safe [POWERPC] Make high hugepage areas preempt safe [POWERPC] Make current preempt-safe [POWERPC] qe_lib: qe_issue_cmd writes wrong value to CECDR [POWERPC] Use 4kB iommu pages even on 64kB-page systems [POWERPC] Fix oprofile support for e500 in arch/powerpc [POWERPC] Fix rmb() for e500-based machines it [POWERPC] Fix various offb issues
2006-11-01[POWERPC] Make mmiowb's io_sync preempt safeHugh Dickins
If mmiowb() is always used prior to releasing spinlock as Doc suggests, then it's safe against preemption; but I'm not convinced that's always the case. If preemption occurs between sync and get_paca()->io_sync = 0, I believe there's no problem. But in the unlikely event that gcc does the store relative to another register than r13 (as it did with current), then there's a small danger of setting another cpu's io_sync to 0, after it had just set it to 1. Rewrite ppc64 mmiowb to prevent that. The remaining io_sync assignments in io.h all get_paca()->io_sync = 1, which is harmless even if preempted to the wrong cpu (the context switch itself syncs); and those in spinlock.h are while preemption is disabled. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-01[POWERPC] Make current preempt-safeHugh Dickins
Repeated -j20 kernel builds on a G5 Quad running an SMP PREEMPT kernel would often collapse within a day, some exec failing with "Bad address". In each case examined, load_elf_binary was doing a kernel_read, but generic_file_aio_read's access_ok saw current->thread.fs.seg as USER_DS instead of KERNEL_DS. objdump of filemap.o shows gcc 4.1.0 emitting "mr r5,r13 ... ld r9,416(r5)" here for get_paca()->__current, instead of the expected and much more usual "ld r9,416(r13)"; I've seen other gcc4s do the same, but perhaps not gcc3s. So, if the task is preempted and rescheduled on a different cpu in between the mr and the ld, r5 will be looking at a different paca_struct from the one it's now on, pick up the wrong __current, and perhaps the wrong seg. Presumably much worse could happen elsewhere, though that split is rare. Other architectures appear to be safe (x86_64's read_pda is more limiting than get_paca), but ppc64 needs to force "current" into one instruction. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-01[POWERPC] Use 4kB iommu pages even on 64kB-page systemsLinas Vepstas
The 10Gigabit ethernet device drivers appear to be able to chew up all 256MB of TCE mappings on pSeries systems, as evidenced by numerous error messages: iommu_alloc failed, tbl c0000000010d5c48 vaddr c0000000d875eff0 npages 1 Some experimentation indicates that this is essentially because one 1500 byte ethernet MTU gets mapped as a 64K DMA region when the large 64K pages are enabled. Thus, it doesn't take much to exhaust all of the available DMA mappings for a high-speed card. This patch changes the iommu allocator to work with its own unique, distinct page size. Although the patch is long, its actually quite simple: it just #defines a distinct IOMMU_PAGE_SIZE and then uses this in all the places that matter. As a side effect, it also dramatically improves network performance on platforms with H-calls on iommu translation inserts/removes (since we no longer call it 16 times for a 1500 bytes packet when the iommu HW is still 4k). In the future, we might want to make the IOMMU_PAGE_SIZE a variable in the iommu_table instance, thus allowing support for different HW page sizes in the iommu itself. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-01[POWERPC] Fix oprofile support for e500 in arch/powerpcAndy Fleming
Fixed a compile error in building the 85xx support with oprofile, and in the process cleaned up some issues with the fsl_booke performance monitor code. * Reorganized FSL Book-E performance monitoring code so that the 7450 wouldn't be built if the e500 was, and cleaned it up so it was more self-contained. * Added a cpu_setup function for FSL Book-E. The original cpu_setup function prototype had no arguments, assuming that the reg_setup function would copy the required information into variables which represented the registers. This was silly for e500, since it has 1 register per counter (rather than 3 for all counters), so the code has been restructured to have cpu_setup take the current counter config array as an argument, with op_powerpc_setup() invoking op_powerpc_cpu_setup() through on_each_cpu(), and op_powerpc_cpu_setup() invoking the model-specific cpu_setup function with an argument. The argument is ignored on all other platforms at present. * Fixed a confusing line where a trinary operator only had two arguments Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-01[POWERPC] Fix rmb() for e500-based machines itAndy Fleming
The e500 core generates an illegal instruction exception when it tries to execute the lwsync instruction, which we currently use for rmb(). This fixes it by using the LWSYNC macro, which turns into a plain sync on 32-bit machines. Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-31[PATCH] libata: unexport ata_dev_revalidate()Tejun Heo
ata_dev_revalidate() isn't used outside of libata core. Unexport it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31Merge branch 'release' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Correct definition of handle_IPI [IA64] move SAL_CACHE_FLUSH check later in boot [IA64] MCA recovery: Montecito support [IA64] cpu-hotplug: Fixing confliction between CPU hot-add and IPI [IA64] don't double >> PAGE_SHIFT pointer for /dev/kmem access
2006-10-31[IA64] move SAL_CACHE_FLUSH check later in bootTroy Heber
The check to see if the firmware drops interrupts during a SAL_CACHE_FLUSH is done to early in the boot. SAL_CACHE_FLUSH expects to be able to make PAL calls in virtual mode, on some cell based machines a fault occurs causing a MCA. This patch moves the check after mmu_context_init so the TLB and VHPT are properly setup. Signed-off-by Troy Heber <troy.heber@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-10-31[MIPS] Fixup migration to GENERIC_TIMEAtsushi Nemoto
Since we already moved to GENERIC_TIME, we should implement alternatives of old do_gettimeoffset routines to get sub-jiffies resolution from gettimeofday(). This patch includes: * MIPS clocksource support (based on works by Manish Lachwani). * remove unused gettimeoffset routines and related codes. * remove unised 64bit do_div64_32(). * simplify mips_hpt_init. (no argument needed, __init tag) * simplify c0_hpt_timer_init. (no need to write to c0_count) * remove some hpt_init routines. * mips_hpt_mask variable to specify bitmask of hpt value. * convert jmr3927_do_gettimeoffset to jmr3927_hpt_read. * convert ip27_do_gettimeoffset to ip27_hpt_read. * convert bcm1480_do_gettimeoffset to bcm1480_hpt_read. * simplify sb1250 hpt functions. (no need to subtract and shift) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-31[MIPS] VSMP: Synchronize cp0 counters on bootup.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-31Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Titan defconfig update. sh: Fix IPR-IRQ's for IRQ-chip change breakage. sh: Update r7780rp_defconfig. video: Fix include in hp680_bl. sh: Wire up new syscalls.
2006-10-31[PATCH] uml: add INITCALLSJeff Dike
This is the UML piece of the INITCALLS tidying. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-31sh: Fix IPR-IRQ's for IRQ-chip change breakage.Jamie Lenehan
The conversion from IPR-IRQ to IRQ-chip resulted in the ipr data being allocated in a local variable in make_ipr_irq - breaking anything using IPR interrupts. This changes all of the callers of make_ipr_irq to allocate a static structure containing the IPR data which is then passed to make_ipr_irq. This removes the need for make_ipr_irq to allocate any additional space for the IPR information. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-31sh: Wire up new syscalls.Paul Mundt
This wires up sys_move_pages, sys_getcpu, and sys_epoll_pwait. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-30[MIPS] MIPS doesn't need compat_sys_getdents.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-30[MIPS] Wire up getcpu(2) and epoll_wait(2) syscalls.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-30[PATCH] MTD: fix last kernel-doc warningRandy Dunlap
Fix the last current kernel-doc warning: Warning(/var/linsrc/linux-2619-rc3g5//include/linux/mtd/nand.h:416): No description found for parameter 'write_page' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-30[PATCH] lockdep: annotate DECLARE_WAIT_QUEUE_HEADPeter Zijlstra
kernel: INFO: trying to register non-static key. kernel: the code is fine but needs lockdep annotation. kernel: turning off the locking correctness validator. kernel: [<c04051ed>] show_trace_log_lvl+0x58/0x16a kernel: [<c04057fa>] show_trace+0xd/0x10 kernel: [<c0405913>] dump_stack+0x19/0x1b kernel: [<c043b1e2>] __lock_acquire+0xf0/0x90d kernel: [<c043bf70>] lock_acquire+0x4b/0x6b kernel: [<c061472f>] _spin_lock_irqsave+0x22/0x32 kernel: [<c04363d3>] prepare_to_wait+0x17/0x4b kernel: [<f89a24b6>] lpfc_do_work+0xdd/0xcc2 [lpfc] kernel: [<c04361b9>] kthread+0xc3/0xf2 kernel: [<c0402005>] kernel_thread_helper+0x5/0xb Another case of non-static lockdep keys; duplicate the paradigm set by DECLARE_COMPLETION_ONSTACK and introduce DECLARE_WAIT_QUEUE_HEAD_ONSTACK. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Greg KH <gregkh@suse.de> Cc: Markus Lidel <markus.lidel@shadowconnect.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@infradead.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-29Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3914/1: [Jornada7xx] - Typo Fix in cpu-sa1110.c (b != B) [ARM] 3913/1: n2100: fix IRQ routing for second ethernet port [ARM] Add KBUILD_IMAGE target support [ARM] Fix suspend oops caused by PXA2xx PCMCIA driver [ARM] Fix i2c-pxa slave mode support [ARM] 3900/1: Fix VFP Division by Zero exception handling. [ARM] 3899/1: Fix the normalization of the denormal double precision number. [ARM] 3909/1: Disable UWIND_INFO for ARM (again) [ARM] Add __must_check to uaccess functions [ARM] Add realview SMP default configuration [ARM] Fix SMP irqflags support
2006-10-28[PATCH] taskstats: kill ->taskstats_lock in favor of ->siglockOleg Nesterov
signal_struct is (mostly) protected by ->sighand->siglock, I think we don't need ->taskstats_lock to protect ->stats. This also allows us to simplify the locking in fill_tgid(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Jay Lan <jlan@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28[PATCH] taskstats_tgid_alloc: optimizationOleg Nesterov
Every subthread (except first) does unneeded kmem_cache_alloc/kmem_cache_free. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Jay Lan <jlan@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28[PATCH] taskstats_tgid_free: fix usageOleg Nesterov
taskstats_tgid_free() is called on copy_process's error path. This is wrong. IF (clone_flags & CLONE_THREAD) We should not clear ->signal->taskstats, current uses it, it probably has a valid accumulated info. ELSE taskstats_tgid_init() set ->signal->taskstats = NULL, there is nothing to free. Move the callsite to __exit_signal(). We don't need any locking, entire thread group is exiting, nobody should have a reference to soon to be released ->signal. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Jay Lan <jlan@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28[PATCH] Constify compat_get_bitmap argumentStephen Rothwell
This means we can call it when the bitmap we want to fetch is declared const. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28[PATCH] visws build fixAndrey Panin
Fix this: > Subject : CONFIG_X86_VISWS=3Dy, CONFIG_SMP=3Dn compile error > References : http://lkml.org/lkml/2006/10/7/51 > Submitter : Jesper Juhl <jesper.juhl@gmail.com> > Caused-By : David Howells <dhowells@redhat.com> > commit 7d12e780e003f93433d49ce78cfedf4b4c52adc5 > Status : unknown Via undescribed means. Signed-off-by: Andrey Panin <pazke@donpac.ru> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28[PATCH] __vmalloc with GFP_ATOMIC causes 'sleeping from invalid context'Giridhar Pemmasani
If __vmalloc is called to allocate memory with GFP_ATOMIC in atomic context, the chain of calls results in __get_vm_area_node allocating memory for vm_struct with GFP_KERNEL, causing the 'sleeping from invalid context' warning. This patch fixes it by passing the gfp flags along so __get_vm_area_node allocates memory for vm_struct with the same flags. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28[PATCH] vmscan: Fix temp_priority raceMartin Bligh
The temp_priority field in zone is racy, as we can walk through a reclaim path, and just before we copy it into prev_priority, it can be overwritten (say with DEF_PRIORITY) by another reclaimer. The same bug is contained in both try_to_free_pages and balance_pgdat, but it is fixed slightly differently. In balance_pgdat, we keep a separate priority record per zone in a local array. In try_to_free_pages there is no need to do this, as the priority level is the same for all zones that we reclaim from. Impact of this bug is that temp_priority is copied into prev_priority, and setting this artificially high causes reclaimers to set distress artificially low. They then fail to reclaim mapped pages, when they are, in fact, under severe memory pressure (their priority may be as low as 0). This causes the OOM killer to fire incorrectly. From: Andrew Morton <akpm@osdl.org> __zone_reclaim() isn't modifying zone->prev_priority. But zone->prev_priority is used in the decision whether or not to bring mapped pages onto the inactive list. Hence there's a risk here that __zone_reclaim() will fail because zone->prev_priority ir large (ie: low urgency) and lots of mapped pages end up stuck on the active list. Fix that up by decreasing (ie making more urgent) zone->prev_priority as __zone_reclaim() scans the zone's pages. This bug perhaps explains why ZONE_RECLAIM_PRIORITY was created. It should be possible to remove that now, and to just start out at DEF_PRIORITY? Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28[PATCH] mm: clean up pagecache allocationNick Piggin
- Consolidate page_cache_alloc - Fix splice: only the pagecache pages and filesystem data need to use mapping_gfp_mask. - Fix grab_cache_page_nowait: same as splice, also honour NUMA placement. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28[ARM] Add __must_check to uaccess functionsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-27[PATCH] drivers: wait for threaded probes between initcall levelsAndrew Morton
The multithreaded-probing code has a problem: after one initcall level (eg, core_initcall) has been processed, we will then start processing the next level (postcore_initcall) while the kernel threads which are handling core_initcall are still executing. This breaks the guarantees which the layered initcalls previously gave us. IOW, we want to be multithreaded _within_ an initcall level, but not between different levels. Fix that up by causing the probing code to wait for all outstanding probes at one level to complete before we start processing the next level. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-27[PATCH] vmlinux.lds: consolidate initcall sectionsAndrew Morton
Add a vmlinux.lds.h helper macro for defining the eight-level initcall table, teach all the architectures to use it. This is a prerequisite for a patch which performs initcall synchronisation for multithreaded-probing. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> [ Added AVR32 as well ] Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-26[IA64] don't double >> PAGE_SHIFT pointer for /dev/kmem accessJes Sorensen
Don't PAGE_SHIFT pointer before handing it to virt_to_page() in xlate_dev_kmem_ptr() as it results in a double shift. Spotted by Bob Montgomery. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-10-25[PATCH] AVR32: add io{read,write}{8,16,32}{be,} supportBen Nizette
A number of new drivers require io{read,write}{8,16,32}{be,} family of io operations. These are provided for the AVR32 by this patch in the form of a series of macros. Access to the (memory mapped) io space through these macros is defined to be little endian only as little endian devices (such as PCI) are the main consumer of IO access. If high speed access is required, io{read,write}{16,32}be macros are supplied to perform native big endian access to this io space. Signed-off-by: Ben Nizette <ben@mallochdigital.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-25[PATCH] AVR32: Fix oversize immediates in atomic.hHaavard Skinnemoen
When calling e.g. atomic_sub_return with a large constant, the compiler may output an immediate that is too large for the sub instruction in the middle of the loop. Fix this by explicitly specifying the number of bits allowed in the constraint. Also stop atomic_add_return() and friends from falling back to their respective "sub" variants if the constant is too large to fit in an immediate. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-25Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (40 commits) [SCSI] aic79xx: Print out signalling [SCSI] aic7xxx: Remove slave_destroy [SCSI] aic79xx: set precompensation [SCSI] aic79xx: Fixup external device reset [SCSI] replace u8 and u32 with __u8 and __u32 in scsi.h for user space [SCSI] lpfc: fix printk format warning [SCSI] aic79xx: make ahd_set_tags() static [SCSI] aic7xxx: cleanups [SCSI] drivers/scsi: Handcrafted MIN/MAX macro removal [SCSI] scsi_debug: support REPORT TARGET PORT GROUPS [SCSI] qla1280 bus reset typo [SCSI] libiscsi: fix logout pdu processing [SCSI] libiscsi: fix aen support [SCSI] libiscsi: fix missed iscsi_task_put in xmit error path [SCSI] libiscsi: fix oops in connection create failure path [SCSI] iscsi class: fix slab corruption during restart [SCSI] Switch fdomain to the pci_get API [SCSI] add can_queue to host parameters [SCSI] megaraid_{mm,mbox}: 64-bit DMA capability fix [SCSI] aic94xx: Supermicro motherboards support ...
2006-10-25Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] x86-64: Only look at per_cpu data for online cpus. [PATCH] x86-64: Simplify the vector allocator.
2006-10-25Merge branch 'merge' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Make sure __cpu_preinit_ppc970 gets called on 970GX processors [POWERPC] Fix CHRP platforms with only 8259 [POWERPC] IPIC: Fix spinlock recursion in set_irq_handler [POWERPC] Fix the UCC rx/tx clock of QE [POWERPC] cell: update defconfig [POWERPC] spufs: fix another off-by-one bug in spufs_mbox_read [POWERPC] spufs: fix signal2 file to report signal2 [POWERPC] Fix device_is_compatible() const warning [POWERPC] Cell timebase bug workaround [POWERPC] Support feature fixups in modules [POWERPC] Support feature fixups in vdso's [POWERPC] Support nested cpu feature sections [POWERPC] Consolidate feature fixup code [POWERPC] Fix hang in start_ldr if _end or _edata is unaligned [POWERPC] Fix spelling errors in ucc_fast.c and ucc_slow.c [POWERPC] Don't require execute perms on wrapper when building zImage.initrd [POWERPC] Add 970GX cputable entry [POWERPC] Fix build breakage with CONFIG_PPC32 [POWERPC] Fix compiler warning message on get_property call [POWERPC] Simplify stolen time calculation
2006-10-25[SCSI] replace u8 and u32 with __u8 and __u32 in scsi.h for user spaceFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] scsi_debug: support REPORT TARGET PORT GROUPSHannes Reinecke
This patch adds support for REPORT TARGET PORT GROUPS. This is used eg for the multipathing priority callout to determine the path priority. With this patch multipath-tools can use the existing mpath_prio_alua callout to exercise the path priority grouping. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] libiscsi: fix oops in connection create failure pathMike Christie
If connection creation fails we end up calling list_del on a invalid struct. This then causes an oops. We are not acutally using the lists (old MCS code we thought might be useful elsewhere) so this patch just removes that code. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] iscsi class: fix slab corruption during restartMike Christie
The transport class recv mempools are causing slab corruption. We could hack around netlink's lack of mempool support like dm, but it is just too ulgy (dm's hack is ugly enough :) when you need to support broadcast. This patch removes the recv pools. We have not used them even when we were allocting 20 MB per session and the system only had 64 MBs. And we have no pools on the send side and have been ok there. When Peter's work gets merged we can use that since the network guys are in favor of that approach and are not going to add mempools everywhere. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[POWERPC] Fix CHRP platforms with only 8259Benjamin Herrenschmidt
On CHRP platforms with only a 8259 controller, we should set the default IRQ host to the 8259 driver's one for the IRQ probing fallbacks to work in case the IRQ tree is incorrect (like on Pegasos for example). Without this fix, we get a bunch of WARN_ON's during boot. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25[POWERPC] Fix device_is_compatible() const warningBenjamin Herrenschmidt
Fix a const'ification related warning with device_is_compatible() and friends related to get_property() not properly having const on it's input device node argument. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25[POWERPC] Cell timebase bug workaroundBenjamin Herrenschmidt
The Cell CPU timebase has an erratum. When reading the entire 64 bits of the timebase with one mftb instruction, there is a handful of cycles window during which one might read a value with the low order 32 bits already reset to 0x00000000 but the high order bits not yet incremeted by one. This fixes it by reading the timebase again until the low order 32 bits is no longer 0. That might introduce occasional latencies if hitting mftb just at the wrong time, but no more than 70ns on a cell blade, and that was considered acceptable. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25[POWERPC] Support feature fixups in vdso'sBenjamin Herrenschmidt
This patch reworks the feature fixup mecanism so vdso's can be fixed up. The main issue was that the construct: .long label (or .llong on 64 bits) will not work in the case of a shared library like the vdso. It will generate an empty placeholder in the fixup table along with a reloc, which is not something we can deal with in the vdso. The idea here (thanks Alan Modra !) is to instead use something like: 1: .long label - 1b That is, the feature fixup tables no longer contain addresses of bits of code to patch, but offsets of such code from the fixup table entry itself. That is properly resolved by ld when building the .so's. I've modified the fixup mecanism generically to use that method for the rest of the kernel as well. Another trick is that the 32 bits vDSO included in the 64 bits kernel need to have a table in the 64 bits format. However, gas does not support 32 bits code with a statement of the form: .llong label - 1b (Or even just .llong label) That is, it cannot emit the right fixup/relocation for the linker to use to assign a 32 bits address to an .llong field. Thus, in the specific case of the 32 bits vdso built as part of the 64 bits kernel, we are using a modified macro that generates: .long 0xffffffff .llong label - 1b Note that is assumes that the value is negative which is enforced by the .lds (those offsets are always negative as the .text is always before the fixup table and gas doesn't support emiting the reloc the other way around). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25[POWERPC] Support nested cpu feature sectionsBenjamin Herrenschmidt
This patch adds some macros that can be used with an explicit label in order to nest cpu features. This should be used very careful but is necessary for the upcoming cell TB fixup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25[POWERPC] Consolidate feature fixup codeBenjamin Herrenschmidt
There are currently two versions of the functions for applying the feature fixups, one for CPU features and one for firmware features. In addition, they are both in assembly and with separate implementations for 32 and 64 bits. identify_cpu() is also implemented in assembly and separately for 32 and 64 bits. This patch replaces them with a pair of C functions. The call sites are slightly moved on ppc64 as well to be called from C instead of from assembly, though it's a very small change, and thus shouldn't cause any problem. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>