aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2008-10-21xtensa: Fix io regionsChris Zankel
The uncached area starts at e000.0000 and spans 1GB. Also add an IOADDR macro to determine the bypass region to access the IO space. Signed-off-by: Chris Zankel <chris@zankel.net>
2008-10-14XTENSA: warn about including <asm/rwsem.h> directly.Robert P. J. Day
For consistency with other architectures, warn about including <asm-xtensa/rwsem.h> directly. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Zankel <chris@zankel.net>
2008-10-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: qlge: Fix page size ifdef test. net: Rationalise email address: Network Specific Parts dsa: fix compile bug on s390 netns: mib6 section fixlet enic: Fix Kconfig headline description de2104x: wrong MAC address fix s390: claw compile fixlet net: export genphy_restart_aneg cxgb3: extend copyrights to 2008 cxgb3: update driver version net/phy: add missing kernel-doc pktgen: fix skb leak in case of failure mISDN/dsp_cmx.c: fix size checks misdn: use nonseekable_open() net: fix driver build errors due to missing net/ip6_checksum.h include
2008-10-14m68k: remove the dead PCI codeAdrian Bunk
This patch removes the no longer used m68k PCI code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Remove the broken Hades supportAdrian Bunk
This patch removes the Hades support that was marked as BROKEN 5 years ago. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: <asm/pci.h> needs <asm-generic/pci-dma-compat.h>Geert Uytterhoeven
Several multi-bus subsystems: | include/linux/ssb/ssb.h: In function 'ssb_dma_mapping_error': | include/linux/ssb/ssb.h:430: error: implicit declaration of function 'pci_dma_mapping_error' | include/linux/ssb/ssb.h: In function 'ssb_dma_map_single': | include/linux/ssb/ssb.h:444: error: implicit declaration of function 'pci_map_single' | include/linux/ssb/ssb.h: In function 'ssb_dma_unmap_single': | include/linux/ssb/ssb.h:458: error: implicit declaration of function 'pci_unmap_single' | include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_for_cpu': | include/linux/ssb/ssb.h:475: error: implicit declaration of function 'pci_dma_sync_single_for_cpu' | include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_for_device': | include/linux/ssb/ssb.h:493: error: implicit declaration of function 'pci_dma_sync_single_for_device' or legacy drivers: | drivers/net/hp100.c: In function 'pdl_map_data': | drivers/net/hp100.c:291: error: implicit declaration of function 'pci_map_single' | drivers/net/hp100.c: In function 'hp100_probe1': | drivers/net/hp100.c:707: error: implicit declaration of function 'pci_alloc_consistent' | drivers/net/hp100.c:782: error: implicit declaration of function 'pci_free_consistent' | drivers/net/hp100.c: In function 'hp100_clean_txring': | drivers/net/hp100.c:1614: error: implicit declaration of function 'pci_unmap_single' and | drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_allocate_scb': | drivers/scsi/aic7xxx_old.c:2573: error: implicit declaration of function 'pci_alloc_consistent' | drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_done': | drivers/scsi/aic7xxx_old.c:2697: error: implicit declaration of function 'pci_unmap_single' | drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_handle_seqint': | drivers/scsi/aic7xxx_old.c:4275: error: implicit declaration of function 'pci_map_single' | drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_free': | drivers/scsi/aic7xxx_old.c:8460: error: implicit declaration of function 'pci_free_consistent' rely on PCI DMA operations to be always available. Add #include <asm-generic/pci-dma-compat.h> to <asm/pci.h> to make them happy. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Add missing dma_sync_single_range_for_{cpu,device}()Geert Uytterhoeven
| include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_range_for_cpu': | include/linux/ssb/ssb.h:517: error: implicit declaration of function 'dma_sync_single_range_for_cpu' | include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_range_for_device': | include/linux/ssb/ssb.h:538: error: implicit declaration of function 'dma_sync_single_range_for_device' Add the missing dma_sync_single_range_for_{cpu,device}(), and remove the `inline' for the non-static function dma_sync_single_for_device(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13net: Rationalise email address: Network Specific PartsAlan Cox
Clean up the various different email addresses of mine listed in the code to a single current and valid address. As Dave says his network merges for 2.6.28 are now done this seems a good point to send them in where they won't risk disrupting real changes. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (66 commits) ata: Add documentation for hard disk shock protection interface (v3) ide: Implement disk shock protection support (v4) ide-cd: fix printk format warning piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list ide-atapi: assign taskfile flags per device type ide-cd: move cdrom_info.dma to ide_drive_t.dma ide: add ide_drive_t.dma flag ide-cd: add a debug_mask module parameter ide-cd: convert driver to new ide debugging macro (v3) ide: move SFF DMA code to ide-dma-sff.c ide: cleanup ide-dma.c ide: cleanup ide_build_dmatable() ide: remove needless includes from ide-dma.c ide: switch to DMA-mapping API part #2 ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n ide: __ide_dma_end() -> ide_dma_end() pmac: remove needless pmac_ide_destroy_dmatable() wrapper pmac: remove superfluous pmif == NULL checks ide: Two fixes regarding memory allocation ...
2008-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits) pcmcia: ioctl-internal definitions pcmcia: cistpl header cleanup pcmcia: remove unused argument to pcmcia_parse_tuple() pcmcia: card services header cleanup pcmcia: device_id header cleanup pcmcia: encapsulate ioaddr_t pcmcia: cleanup device driver header file pcmcia: cleanup socket services header file pcmcia: merge ds_internal.h into cs_internal.h pcmcia: cleanup cs_internal.h pcmcia: cs_internal.h is internal pcmcia: use dev_printk for cs_error() pcmcia: remove CS_ error codes alltogether pcmcia: deprecate CS_BAD_TUPLE pcmcia: deprecate CS_BAD_ARGS pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE pcmcia: deprecate CS_NO_MORE_ITEMS pcmcia: deprecate CS_IN_USE pcmcia: deprecate CS_CONFIGURATION_LOCKED ... Fix trivial conflict in drivers/pcmcia/ds.c manually
2008-10-13Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (313 commits) V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cards V4L/DVB (9185): S2API: Ensure we have a reasonable ROLLOFF default V4L/DVB (9184): cx24116: Change the default SNR units back to percentage by default. V4L/DVB (9183): S2API: Return error of the caller provides 0 commands. V4L/DVB (9182): S2API: Added support for DTV_HIERARCHY V4L/DVB (9181): S2API: Add support fot DTV_GUARD_INTERVAL and DTV_TRANSMISSION_MODE V4L/DVB (9180): S2API: Added support for DTV_CODE_RATE_HP/LP V4L/DVB (9179): S2API: frontend.h cleanup V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO. V4L/DVB (9177): S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16 V4L/DVB (9176): Add support for DvbWorld USB cards with STV0288 demodulator. V4L/DVB (9175): Remove NULL pointer in stb6000 driver. V4L/DVB (9174): Allow custom inittab for ST STV0288 demodulator. V4L/DVB (9173): S2API: Remove the hardcoded command limit during validation V4L/DVB (9172): S2API: Bugfix related to DVB-S / DVB-S2 tuning for the legacy API. V4L/DVB (9171): S2API: Stop an OOPS if illegal commands are dumped in S2API. V4L/DVB (9170): cx24116: Sanity checking to data input via S2API to the cx24116 demod. V4L/DVB (9169): uvcvideo: Support two new Bison Electronics webcams. V4L/DVB (9168): Add support for MSI TV@nywhere Plus remote V4L/DVB: v4l2-dev: remove duplicated #include ...
2008-10-13ide: Implement disk shock protection support (v4)Elias Oltmanns
On user request (through sysfs), the IDLE IMMEDIATE command with UNLOAD FEATURE as specified in ATA-7 is issued to the device and processing of the request queue is stopped thereafter until the specified timeout expires or user space asks to resume normal operation. This is supposed to prevent the heads of a hard drive from accidentally crashing onto the platter when a heavy shock is anticipated (like a falling laptop expected to hit the floor). Port resets are deferred whenever a device on that port is in the parked state. v3: Elias Oltmanns <eo@nebensachen.de> wrote: [...] > >> 1. Make sure that no negative value is being passed to > >> jiffies_to_msecs() in ide_park_show(). > >> 2. Drop the superfluous variable hwif in ide_special_rq(). > >> 3. Skip initialisation of task and tf in ide_special_rq() if we are not > >> handling a (un)park request. > > > > Well, #3 should have been done differently because we donn't want to > > check for REQ_(UN)?PARK_HEADS more often than is necessary. > > While preparing the backport to 2.6.27, it has just occurred to me that > we need to clear the IDE_DFLAG_PARKED flag in ide_disk_pre_reset() > because this flag must not be set after *any* sort of access to the > device. v4: Fix a memory leak due to a missing blk_put_request() in issue_park_cmd(). Additionally, we should plug the queue when enqueueing the unpark request because there is no guarantee that the park timeout has not expired by then. Even though the chance for that to happen is very slim, the request might end up hanging in the queue until the next I/O operation is queued up. While at it, clean up the code a little: - make issue_park_cmd() a function of type void since nobody cares for the return value anyway; - use blk_start_queueing() instead of __blk_run_queue() since we don't have to worry about recursion; - remove a superfluous pointer deference in task_no_data_intr(). Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Cc: Jeff Garzik <jeff@garzik.org>, Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add ide_drive_t.dma flagBorislav Petkov
This flag is to accomodate ide-cd functionality into ide atapi. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: move SFF DMA code to ide-dma-sff.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: switch to DMA-mapping API part #2Bartlomiej Zolnierkiewicz
Follow-up to commit 5c05ff68b9a9b40a9be949497e0aa980185565cf ("ide: switch to DMA-mapping API"): * pci_{alloc,free}_consistent() -> dma_{alloc,free}_coherent() in ide_{allocate,release}_dma_engine(). * Add ->prd_max_nents and ->prd_ent_size fields to ide_hwif_t (+ set default values in ide_allocate_dma_engine()). * Make ide_{allocate,release}_dma_engine() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n. Then convert au1xxx-ide.c, scc_pata.c and sgiioc4.c to use them. * Add missing ->init_dma method to scc_pata. This patch also fixes: - ->dmatable_cpu leak for au1xxx-ide - too early realease of ->dmatable_cpu for scc_pata - wrong amount of ->dmatable_cpu memory being freed for sgiioc4 While at it: - remove superfluous ->dma_base check from ide_unregister() - return -ENOMEM on error in ide_release_dma_engine() - beautify error message in ide_release_dma_engine() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=nBartlomiej Zolnierkiewicz
Make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n and convert {ics,au1xxx-}ide.c to use it. While at it: - dump ATA Status register content on error - use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=nBartlomiej Zolnierkiewicz
Make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n and convert {ics,au1xxx-}ide.c to use it. While at it: - use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: __ide_dma_end() -> ide_dma_end()Bartlomiej Zolnierkiewicz
While at it: - use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-disk: move all ioctl handling to ide-disk_ioctl.cBartlomiej Zolnierkiewicz
While at it: - idedisk_ioctl() -> ide_disk_ioctl() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove ide_host_alloc_all()Bartlomiej Zolnierkiewicz
* Remove no longer used ide_host_alloc_all(). * Add MAX_HOST_PORTS define and use it instead of MAX_HWIFS as the maximum number of host ports possible. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: ->ide_dma_clear_irq() -> ->clear_irq()Bartlomiej Zolnierkiewicz
* Rename ->ide_dma_clear_irq method to ->clear_irq and move it from ide_hwif_t to struct ide_port_ops. * Move ->waiting_for_dma check inside ->clear_irq method. * Move ->dma_base check inside ->clear_irq method. piix.c: * Add ich_port_ops and remove init_hwif_ich() wrapper. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: merge all TASKFILE_NO_DATA data phase handlers into taskfile_no_intr()Bartlomiej Zolnierkiewicz
* Add 'struct task_s' to ide_hwif_t and init it to the current command in do_rw_taskfile(). * Merge all TASKFILE_NO_DATA data phase handlers into taskfile_no_intr(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: convert 'pio_mode' device setting to use DS_SYNC flagBartlomiej Zolnierkiewicz
* Convert 'pio_mode' device setting to use DS_SYNC flag. * Remove unused special_t.b.{set_tune,serviced} and ide_drive_t.tune_req. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove [ata_]select_tBartlomiej Zolnierkiewicz
* Use 'drive->dn & 1' in ide_init_disk(). * remove [ata_]select_t. While at it: * Use ATA_DEVICE_OBS define in ide_port_init_devices_data(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: sanitize ide*_pm_* enumsBartlomiej Zolnierkiewicz
* Move ide*_pm_* enums from ide-io.c to <linux/ide.h>. * idedisk_pm_* -> ide_pm_* * ide_pm_state_* -> ide_pm_* * No need to set ide_pm_* enums to the fixed values. * Uppercase ide_pm_* enums. * Fix/update comments. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: fix HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devicesBartlomiej Zolnierkiewicz
Add IDE_DFLAG_LBA device flag and use it instead of ->select.b.lba. Since ->tf_load uses ->select.all for ATA Device/Head register this fixes HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devices. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove superfluous ->dma field from ide_hwif_tBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove superfluous ->media field from ide_driver_tBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: DMA_PIO_RETRY -> IDE_DFLAG_DMA_PIO_RETRYBartlomiej Zolnierkiewicz
Add IDE_DFLAG_DMA_PIO_RETRY and use it instead of ide_drive_t.state + DMA_PIO_RETRY. There should be no functional changes cause by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add device flagsBartlomiej Zolnierkiewicz
Add 'unsigned long dev_flags' to ide_drive_t and convert bitfields to IDE_DFLAG_* flags. While at it: - IDE_DFLAG_ADDRESSING -> IDE_DFLAG_LBA48 - fixup some comments - remove needless g->flags zeroing from ide*_probe() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-disk: set_addressing() fixesBartlomiej Zolnierkiewicz
* Return -EIO if arg > 0 and LBA48 is unsupported. * No need to reset ->addressing. * Make ->addressing a single bit flag. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add a driver-wide debugging macroBorislav Petkov
Add __ide_debug_log() debugging macro which is controlled by drive->debug_mask. The macro has to have the macro DRV_NAME defined in each driver before use. Also, add different debugging levels depending on the functionality debugged. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add drive->debug_mask switchBorislav Petkov
Add a debugging on/off switch for controlling driver debugging messages dynamically. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: unify conversion macrosBorislav Petkov
Introduce to_ide_drv() and ide_drv_g() macros and replace the respective definitions of similar ones in each driver. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: make ide_transfer_pc() staticBartlomiej Zolnierkiewicz
* Move ->ticks field from struct ide_floppy_obj to ide_drive_t. * Move idefloppy_transfer_pc() to ide-atapi.c and make ide_transfer_pc() use it. * Always use ide_transfer_pc as a handler in ide_issue_pc(). * Remove no longer used idefloppy_start_pc_transfer(), ide*_transfer_pc() and 'handler' argument from ide_issue_pc(). * Make ide_transfer_pc() static. While at it: * idefloppy_transfer_pc() -> ide_delayed_transfer_pc() * IDEFLOPPY_TICKS_DELAY -> IDEFLOPPY_PC_DELAY * ->ticks -> ->pc_delay There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: make ide_pc_intr() staticBartlomiej Zolnierkiewicz
* Always use ide_pc_intr as a handler in ide_pc_intr(). * Remove no longer used ide*_pc_intr() and 'handler' argument from ide_{transfer_pc,pc_intr}(). * Make ide_pc_intr() static. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add ->pc_{update,io}_buffers methodsBartlomiej Zolnierkiewicz
Add ->pc_{update,io}_buffers methods to ide_drive_t and use them instead of {update,io}_buffers ide_pc_intr() arguments. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add ide_retry_pc() helperBartlomiej Zolnierkiewicz
* Add ide_create_request_sense_cmd() and ide_retry_pc() helpers and convert ide-{atapi,floppy,tape}.c to use them. * Remove no longer used ide*_create_request_sense_cmd(), ide*_retry_pc() and 'retry_pc' argument from ide_pc_intr(). * Make ide_queue_pc_head() static. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add request_sense_{pc,rq} to ide_drive_tBartlomiej Zolnierkiewicz
Add 'struct ide_atapi_pc request_sense_pc' and 'request request_sense_rq' to ide_drive_t and use them instead of fields in struct ide_{floppy,tape}_obj. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: drop 'timeout' and 'expiry' arguments from ide_pc_intr()Bartlomiej Zolnierkiewicz
* Move idescsi_expiry() to ide-atapi.c. * Move get_timeout() to <linux/ide.h>. * Drop 'timeout' and 'expiry' arguments from ide_pc_intr(). While at it: * idescsi_expiry() -> ide_scsi_expiry() * get_timeout() -> ide_scsi_get_timeout() There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add pointer to the current packet command to ide_drive_tBartlomiej Zolnierkiewicz
* Add pointer to the current packet command (struct ide_atapi_pc *pc) to ide_drive_t and use it instead of the pointer in struct ide_*_obj. * Use drive->pc in ide_{issue,transfer}_pc() and ide_pc_intr() instead of 'pc' argument. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: drop dsc_handle argument from ide_pc_intr()Bartlomiej Zolnierkiewicz
* Add 'int dsc' argument to ->pc_callback method. * Call ide_tape_handle_dsc() internally in ide_tape_callback() if dsc argument is set and update ide_pc_intr() accordingly. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13vfs: Use const for kernel parser tableSteven Whitehouse
This is a much better version of a previous patch to make the parser tables constant. Rather than changing the typedef, we put the "const" in all the various places where its required, allowing the __initconst exception for nfsroot which was the cause of the previous trouble. This was posted for review some time ago and I believe its been in -mm since then. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (33 commits) ALSA: ASoC codec: remove unused #include <version.h> ALSA: ASoC: update email address for Liam Girdwood ALSA: hda: corrected invalid mixer values ALSA: hda: add mixers for analog mixer on 92hd75xx codecs ALSA: ASoC: Add destination and source port for DMA on OMAP1 ALSA: ASoC: Drop device registration from GTA01 lm4857 driver ALSA: ASoC: Fix build of GTA01 audio driver ALSA: ASoC: Add widgets before setting endpoints on GTA01 ALSA: ASoC: Fix inverted input PGA mute bits in WM8903 ALSA: ASoC: OMAP: Set DMA stream name at runtime in McBSP DAI driver ALSA: ASoC: OMAP: Add support for OMAP2430 and OMAP34xx in McBSP DAI driver ALSA: ASoC: OMAP: Add multilink support to McBSP DAI driver ALSA: ASoC: Make TLV320AIC26 user-visible ALSA: ASoC - clean up Kconfig for TLV320AIC2 ALSA: ASoC: Make WM8510 microphone input a DAPM mixer ALSA: ASoC: Implement WM8510 bias level control ALSA: ASoC: Remove unused AUDIO_NAME define from codec drivers ALSA: ASoC: tlv320aic3x: Use uniform tlv320aic naming ALSA: ASoC: Add WM8510 SPI support ALSA: ASoC: Add WM8753 SPI support ...
2008-10-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (24 commits) integrity: special fs magic As pointed out by Jonathan Corbet, the timer must be deleted before ERROR: code indent should use tabs where possible The tpm_dev_release function is only called for platform devices, not pnp Protect tpm_chip_list when transversing it. Renames num_open to is_open, as only one process can open the file at a time. Remove the BKL calls from the TPM driver, which were added in the overall netlabel: Add configuration support for local labeling cipso: Add support for native local labeling and fixup mapping names netlabel: Changes to the NetLabel security attributes to allow LSMs to pass full contexts selinux: Cache NetLabel secattrs in the socket's security struct selinux: Set socket NetLabel based on connection endpoint netlabel: Add functionality to set the security attributes of a packet netlabel: Add network address selectors to the NetLabel/LSM domain mapping netlabel: Add a generic way to create ordered linked lists of network addrs netlabel: Replace protocol/NetLabel linking with refrerence counts smack: Fix missing calls to netlbl_skbuff_err() selinux: Fix missing calls to netlbl_skbuff_err() selinux: Fix a problem in security_netlbl_sid_to_secattr() selinux: Better local/forward check in selinux_ip_postroute() ...
2008-10-13Merge git://git.infradead.org/users/dwmw2/random-2.6Linus Torvalds
* git://git.infradead.org/users/dwmw2/random-2.6: Fix autoloading of MacBook Pro backlight driver. Automatic MODULE_ALIAS() for DMI match tables. Remove asm/a.out.h files for all architectures without a.out support. Introduce HAVE_AOUT symbol to remove hard-coded arch list for BINFMT_AOUT Remove redundant CONFIG_ARCH_SUPPORTS_AOUT S390: Update comments about why we don't use <asm-generic/statfs.h> SPARC: Use <asm-generic/statfs.h> PowerPC: Use <asm-generic/statfs.h> PARISC: Use <asm-generic/statfs.h> x86_64: Use <asm-generic/statfs.h> IA64: Use <asm-generic/statfs.h> ARM: Use <asm-generic/statfs.h> Make <asm-generic/statfs.h> suitable for 64-bit platforms. Define and use PCI_DEVICE_ID_MARVELL_88ALP01_CCIC for CAFÉ camera driver [MTD] [NAND] Define and use PCI_DEVICE_ID_MARVELL_88ALP01_NAND for CAFÉ Use PCI_DEVICE_ID_88ALP01 for CAFÉ chip, rather than PCI_DEVICE_ID_CAFE. EFS: Don't set f_fsid in statfs().
2008-10-13Merge phase #5 (misc) of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip Merges oprofile, timers/hpet, x86/traps, x86/time, and x86/core misc items. * 'x86-core-v4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (132 commits) x86: change early_ioremap to use slots instead of nesting x86: adjust dependencies for CONFIG_X86_CMOV dumpstack: x86: various small unification steps, fix x86: remove additional_cpus x86: remove additional_cpus configurability x86: improve UP kernel when CPU-hotplug and SMP is enabled dumpstack: x86: various small unification steps dumpstack: i386: make kstack= an early boot-param and add oops=panic dumpstack: x86: use log_lvl and unify trace formatting dumptrace: x86: consistently include loglevel, print stack switch dumpstack: x86: add "end" parameter to valid_stack_ptr and print_context_stack dumpstack: x86: make printk_address equal dumpstack: x86: move die_nmi to dumpstack_32.c traps: x86: finalize unification of traps.c traps: x86: make traps_32.c and traps_64.c equal traps: x86: various noop-changes preparing for unification of traps_xx.c traps: x86_64: use task_pid_nr(tsk) instead of tsk->pid in do_general_protection traps: i386: expand clear_mem_error and remove from mach_traps.h traps: x86_64: make io_check_error equal to the one on i386 traps: i386: use preempt_conditional_sti/cli in do_int3 ...
2008-10-13tty: some ICANON magic is in the wrong placesAlan Cox
Move the set up on ldisc change into the ldisc Move the INQ/OUTQ cases into the driver not in shared ioctl code where it gives bogus answers for other ldisc values Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Add an instance parameter devpts interfacesSukadev Bhattiprolu
Pass-in 'inode' or 'tty' parameter to devpts interfaces. With multiple devpts instances, these parameters will be used in subsequent patches to identify the instance of devpts mounted. The parameters also help simplify devpts implementation. Changelog[v3]: - minor changes due to merge with ttydev updates - rename parameters to emphasize they are ptmx or pts inodes - pass-in tty_struct * to devpts_pty_kill() (this will help cleanup the get_node() call in a subsequent patch) Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13tty: extract the pty init time special casesAlan Cox
The majority of the remaining init_dev code is pty special cases. We refactor this code into the driver->install method. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 05:07:25 +0000