| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Now that we're using the flags to indicate state that needs to be
recovered, as well as having implemented proper refcounting and spinlocking
on the state and open_owners, we can get rid of nfs_client->cl_sem. The
only remaining case that was dubious was the file locking, and that case is
now covered by the nfsi->rwsem.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If the admin has specified the "noresvport" option for an NFS mount
point, the kernel's NFS client uses an unprivileged source port for
the main NFS transport. The kernel's lockd client should use an
unprivileged port in this case as well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The standard default security setting for NFS is AUTH_SYS. An NFS
client connects to NFS servers via a privileged source port and a
fixed standard destination port (2049). The client sends raw uid and
gid numbers to identify users making NFS requests, and the server
assumes an appropriate authority on the client has vetted these
values because the source port is privileged.
On Linux, by default in-kernel RPC services use a privileged port in
the range between 650 and 1023 to avoid using source ports of well-
known IP services. Using such a small range limits the number of NFS
mount points and the number of unique NFS servers to which a client
can connect concurrently.
An NFS client can use unprivileged source ports to expand the range of
source port numbers, allowing more concurrent server connections and
more NFS mount points. Servers must explicitly allow NFS connections
from unprivileged ports for this to work.
In the past, bumping the value of the sunrpc.max_resvport sysctl on
the client would permit the NFS client to use unprivileged ports.
Bumping this setting also changes the maximum port number used by
other in-kernel RPC services, some of which still required a port
number less than 1023.
This is exacerbated by the way source port numbers are chosen by the
Linux RPC client, which starts at the top of the range and works
downwards. It means that bumping the maximum means all RPC services
requesting a source port will likely get an unprivileged port instead
of a privileged one.
Changing this setting effects all NFS mount points on a client. A
sysadmin could not selectively choose which mount points would use
non-privileged ports and which could not.
Lastly, this mechanism of expanding the limit on the number of NFS
mount points was entirely undocumented.
To address the need for the NFS client to use a large range of source
ports without interfering with the activity of other in-kernel RPC
services, we introduce a new NFS mount option. This option explicitly
tells only the NFS client to use a non-privileged source port when
communicating with the NFS server for one specific mount point.
This new mount option is called "resvport," like the similar NFS mount
option on FreeBSD and Mac OS X. A sister patch for nfs-utils will be
submitted that documents this new option in nfs(5).
The default setting for this new mount option requires the NFS client
to use a privileged port, as before. Explicitly specifying the
"noresvport" mount option allows the NFS client to use an unprivileged
source port for this mount point when connecting to the NFS server
port.
This mount option is supported only for text-based NFS mounts.
[ Sidebar: it is widely known that security mechanisms based on the
use of privileged source ports are ineffective. However, the NFS
client can combine the use of unprivileged ports with the use of
secure authentication mechanisms, such as Kerberos. This allows a
large number of connections and mount points while ensuring a useful
level of security.
Eventually we may change the default setting for this option
depending on the security flavor used for the mount. For example,
if the mount is using only AUTH_SYS, then the default setting will
be "resvport;" if the mount is using a strong security flavor such
as krb5, the default setting will be "noresvport." ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[Trond.Myklebust@netapp.com: Fixed a bug whereby nfs4_init_client()
was being called with incorrect arguments.]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Clean up: The nfs_mount() function is not to be used outside of the
NFS client. Move its public declaration to fs/nfs/internal.h.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Somehow, this escaped the previous purge. There should be no need to keep
any extra locks in the XDR callbacks.
The NFS client XDR code only writes into private objects, whereas all reads
of shared objects are confined to fields that do not change, such as
filehandles...
Ditto for lockd, the NFSv2/v3 client mount code, and rpcbind.
The nfsd XDR code may require the BKL, but since it does a synchronous RPC
call from a thread that already holds the lock, that issue is moot.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
|
|
'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core
|
|
Conflicts:
arch/x86/kernel/apic.c
|
|
When the napi api was changed to separate its 1:1 binding to the net_device
struct, the netif_rx_[prep|schedule|complete] api failed to remove the now
vestigual net_device structure parameter. This patch cleans up that api by
properly removing it..
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using MSI-X mode, create a completion event queue for each CPU.
Report the number of completion EQs in a new struct mlx4_caps member,
num_comp_vectors, and extend the mlx4_cq_alloc() interface with a
vector parameter so that consumers can specify which completion EQ
should be used to report events for the CQ being created.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
|
This patch adds sh_mobile_lcdcfb deferred io support for SYS panels.
The LCDC hardware block managed by the sh_mobile_lcdcfb driver supports
RGB or SYS panel configurations. SYS panels come with an external display
controller that is resposible for refreshing the actual LCD panel. RGB
panels are controlled directly by the LCDC and they need to be refreshed
by the LCDC hardware.
In the case of SYS panels we can save some power by configuring the LCDC
hardware block in one-shot mode. In this one-shot mode panel refresh is
managed by software. This works well together with deferred io since it
allows us to stop clocks for most of the time and only enable clocks when
we actually want to trigger an update. When there is no fbdev activity
the clocks are kept stopped which allows us to deep sleep.
The refresh rate in deferred io mode is set using platform data. The same
platform data can also be used to disable deferred io mode.
As with other deferred io frame buffers user space code should use fsync()
on the frame buffer device to trigger an update.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
Adds the Backward Congestion Notification Address (BCNA) attribute to the
Backward Congestion Notification (BCN) interface for Data Center Bridging
(DCB), which was missing. Receive the BCNA attribute in the ixgbe driver.
The BCNA attribute is for a switch to inform the endstation about the physical
port identification in order to support BCN on aggregated links.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Data Center Bridging (DCB) had no way to know if setstate had failed in the
driver. This patch enables dcb netlink code to handle the status for the DCB
setstate interface. Likewise it allows the driver to return a failed status
if MSI-X isn't enabled.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Impact: broaden gcc printf format checks for ftrace_printk()
format arguments checking for ftrace_printk() is __printf(1, 2),
not __printf(1, 0).
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This function is used to count how many GPIOs are specified for
a device node.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
|
|
Impact: move the BTS buffer accounting to the mlock bucket
Add alloc_locked_buffer() and free_locked_buffer() functions to mm/mlock.c
to kalloc a buffer and account the locked memory to current.
Account the memory for the BTS buffer to the tracer.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: introduce new ptrace facility
Add arch_ptrace_untrace() function that is called when the tracer
detaches (either voluntarily or when the tracing task dies);
ptrace_disable() is only called on a voluntary detach.
Add ptrace_fork() and arch_ptrace_fork(). They are called when a
traced task is forked.
Clear DS and BTS related fields on fork.
Release DS resources and reclaim memory in ptrace_untrace(). This
releases resources already when the tracing task dies. We used to do
that when the traced task dies.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: Cleanup and branch hints only.
Move the track and untrack pfn stub routines from memory.c to asm-generic.
Also add unlikely to pfnmap related calls in fork and exit path.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Impact: Cleanup - removes a new function in favor of a recently modified older one.
Replace follow_pfnmap_pte in pat code with follow_phys. follow_phys lso
returns protection eliminating the need of pte_pgprot call. Using follow_phys
also eliminates the need for pte_pa.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Impact: Changes and globalizes an existing static interface.
Follow_phys does similar things as follow_pfnmap_pte. Make a minor change
to follow_phys so that it can be used in place of follow_pfnmap_pte.
Physical address return value with 0 as error return does not work in
follow_phys as the actual physical address 0 mapping may exist in pte.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Impact: Documentation only
Incremental patches to address the review comments from Nick Piggin
for v3 version of x86 PAT pfnmap changes patchset here
http://lkml.indiana.edu/hypermail/linux/kernel/0812.2/01330.html
This patch:
Clarify is_linear_pfn_mapping() and its usage.
It is used by x86 PAT code for performance reasons. Identifying pfnmap
as linear over entire vma helps speedup reserve and free of memtype
for the region.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Pass mount flags to security_sb_kern_mount(), so security modules
can determine if a mount operation is being performed by the kernel.
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
|
|
This patch implements dynamic power save for mac80211. Basically it
means enabling power save mode after an idle period. Implementing it
dynamically gives a good compromise of low power consumption and low
latency. Some hardware have support for this in firmware, but some
require the host to do it.
The dynamic power save is implemented by adding an timeout to
ieee80211_subif_start_xmit(). The timeout can be enabled from userspace
with Wireless Extensions. For example, the command below enables the
dynamic power save and sets the time timeout to 500 ms:
iwconfig wlan0 power timeout 500m
Power save now only works with devices which handle power save in firmware.
It's also disabled by default and the heuristics when and how to enable is
considered as a policy decision and will be left for the userspace to handle.
In case the firmware has support for this, drivers can disable this feature
with IEEE80211_HW_NO_STACK_DYNAMIC_PS.
Big thanks to Johannes Berg for the help with the design and code.
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch adds option for HT-enabled drivers to report HT rates
(HT20/HT40, short GI, MCS index) to mac80211. These rates are
currently not in the rate table, so the rate_idx is used to indicate
MCS index.
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
HT management is done differently for AP and STA modes, unify
to just the ->config() callback since HT is fundamentally a
PHY property and cannot be per-BSS.
Rename enum nl80211_sec_chan_offset as nl80211_channel_type to denote
the channel type ( NO_HT, HT20, HT40+, HT40- ).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch adds signal strength and transmission bitrate
to the station_info of nl80211.
Signed-off-by: Henning Rogge <rogge@fgan.de>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The ACPI interpreter usually runs with irqs enabled.
However, during suspend/resume it runs with
irqs disabled to evaluate _GTS/_BFS, as well as
by irqrouter_resume() which evaluates _CRS, _PRS, _SRS.
http://bugzilla.kernel.org/show_bug.cgi?id=12252
Signed-off-by: Wu Fengguang <wfg@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
acpi_early_init() was changed to over-write the cmdline param,
making it really inconvenient to set debug flags at boot-time.
Also,
This sets the default level to "info", which is what all the ACPI
drivers use. So to enable messages from drivers, you only have to
supply the "layer" (a.k.a. "component"). For non-"info" ACPI core
and ACPI interpreter messages, you have to supply both level and
layer masks, as before.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
into tracing/core
Conflicts:
include/linux/ftrace.h
|
|
|
|
these warnings:
kernel/trace/trace_sched_switch.c: In function ‘tracing_sched_register’:
kernel/trace/trace_sched_switch.c:96: warning: passing argument 1 of ‘register_trace_sched_wakeup_new’ from incompatible pointer type
kernel/trace/trace_sched_switch.c:112: warning: passing argument 1 of ‘unregister_trace_sched_wakeup_new’ from incompatible pointer type
kernel/trace/trace_sched_switch.c: In function ‘tracing_sched_unregister’:
kernel/trace/trace_sched_switch.c:121: warning: passing argument 1 of ‘unregister_trace_sched_wakeup_new’ from incompatible pointer type
Trigger because sched_wakeup_new tracepoints need the same trace
signature as sched_wakeup - which was changed recently.
Fix it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: New mm functionality.
Add pgprot_writecombine. pgprot_writecombine will be aliased to
pgprot_noncached when not supported by the architecture.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Impact: Introduces new hooks, which are currently null.
Introduce generic hooks in remap_pfn_range and vm_insert_pfn and
corresponding copy and free routines with reserve and free tracking.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Impact: New currently unused interface.
Add a generic interface to follow pfn in a pfnmap vma range. This is used by
one of the subsequent x86 PAT related patch to keep track of memory types
for vma regions across vma copy and free.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Impact: Code transformation, new functions added should have no effect.
Drivers use mmap followed by pgprot_* and remap_pfn_range or vm_insert_pfn,
in order to export reserved memory to userspace. Currently, such mappings are
not tracked and hence not kept consistent with other mappings (/dev/mem,
pci resource, ioremap) for the sme memory, that may exist in the system.
The following patchset adds x86 PAT attribute tracking and untracking for
pfnmap related APIs.
First three patches in the patchset are changing the generic mm code to fit
in this tracking. Last four patches are x86 specific to make things work
with x86 PAT code. The patchset aso introduces pgprot_writecombine interface,
which gives writecombine mapping when enabled, falling back to
pgprot_noncached otherwise.
This patch:
While working on x86 PAT, we faced some hurdles with trackking
remap_pfn_range() regions, as we do not have any information to say
whether that PFNMAP mapping is linear for the entire vma range or
it is smaller granularity regions within the vma.
A simple solution to this is to use vm_pgoff as an indicator for
linear mapping over the vma region. Currently, remap_pfn_range
only sets vm_pgoff for COW mappings. Below patch changes the
logic and sets the vm_pgoff irrespective of COW. This will still not
be enough for the case where pfn is zero (vma region mapped to
physical address zero). But, for all the other cases, we can look at
pfnmap VMAs and say whether the mappng is for the entire vma region
or not.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
bnx2: Fix bug in bnx2_free_rx_mem().
irda: Add irda_skb_cb qdisc related padding
jme: Fixed a typo
net: kernel BUG at drivers/net/phy/mdio_bus.c:165!
drivers/net: starfire: Fix napi ->poll() weight handling
tlan: Fix pci memory unmapping
enc28j60: use netif_rx_ni() to deliver RX packets
tlan: Fix small (< 64 bytes) datagram transmissions
netfilter: ctnetlink: fix missing CTA_NAT_SEQ_UNSPEC
|
|
The WM8350 is an integrated audio and power management subsystem which
provides a single-chip solution for portable audio and multimedia systems.
The integrated audio CODEC provides all the necessary functions for
high-quality stereo recording and playback. Programmable on-chip
amplifiers allow for the direct connection of headphones and microphones
with a minimum of external components. A programmable low-noise bias
voltage is available to feed one or more electret microphones.
Additional audio features include programmable high-pass filter in the
ADC input path.
This driver was originally written by Liam Girdwood with further updates
from me.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
Impact: simplify code
When we turn on CONFIG_SCHEDSTATS, per-task cpu runtime is accumulated
twice. Once in task->se.sum_exec_runtime and once in sched_info.cpu_time.
These two stats are exactly the same.
Given that task->se.sum_exec_runtime is always accumulated by the core
scheduler, sched_info can reuse that data instead of duplicate the accounting.
Signed-off-by: Ken Chen <kenchen@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: enhancement to stack tracer
The stack tracer currently is either on when configured in or
off when it is not. It can not be disabled when it is configured on.
(besides disabling the function tracer that it uses)
This patch adds a way to enable or disable the stack tracer at
run time. It defaults off on bootup, but a kernel parameter 'stacktrace'
has been added to enable it on bootup.
A new sysctl has been added "kernel.stack_tracer_enabled" to let
the user enable or disable the stack tracer at run time.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
|
|
GPRS TX flow control won't need to lock the underlying socket anymore.
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A separate xmit lock class supports GPRS over a Phonet pipe over a TUN
device (type ARPHRD_NONE).
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Also leave some room for more 802.11 types.
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to pad irda_skb_cb in order to keep it safe accross dev_queue_xmit()
calls. This is some ugly and temporary hack triggered by recent qisc code
changes.
Even though it fixes bugzilla.kernel.org bug #11795, it will be replaced by a
proper fix before 2.6.29 is released.
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes a comment and clarifies the documentation about the
endianness of descriptors. The current policy is that descriptors will
be little-endian at the API even on big-endian systems; however the
/proc/bus/usb API predates this policy and presents descriptors with
some multibyte fields byte-swapped.
Signed-off-by: Phil Endecott <usb_endian_patch@chezphil.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Does the same for the accompanying MDIO driver, and then modifies the TBI
configuration method. The old way used fields in einfo, which no longer
exists. The new way is to create an MDIO device-tree node for each instance
of gianfar, and create a tbi-handle property to associate ethernet controllers
with the TBI PHYs they are connected to.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/enc28j60.c
|
