| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
|
|
IRQ_SW_INT1 and IRQ_SW_INT2 obsolete:
Remove useless defines
Fix SYS_IRQS
Keep numbering scheme, so we don't break existing configurations.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
|
|
When transferring to IRQ5 from an exception, save SYSCFG in memory across the
transfer and clear the trace bit.
When we get a single step exception, check whether we can safely clear the
trace bit in SYSCFG. We can (and should) clear it after the first instruction
of the interrupt handler; the first insn saves SYSCFG to the stack in all
handlers.
Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
|
|
Singed-off-by: Vitja Makarov <vitja.makarov@gmail.com>
|
|
voltage scaling support
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
|
|
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
|
|
Fix warning from pmd_bad() at bootup on a HIGHMEM64G HIGHPTE x86_32.
That came from 9fc34113f6880b215cbea4e7017fc818700384c2 x86: debug pmd_bad();
but we understand now that the typecasting was wrong for PAE in the previous
version: pagetable pages above 4GB looked bad and stopped Arjan from booting.
And revert that cded932b75ab0a5f9181ee3da34a0a488d1a14fd x86: fix pmd_bad
and pud_bad to support huge pages. It was the wrong way round: we shouldn't
weaken every pmd_bad and pud_bad check to let huge pages slip through - in
part they check that we _don't_ have a huge page where it's not expected.
Put the x86 pmd_bad() and pud_bad() definitions back to what they have long
been: they can be improved (x86_32 should use PTE_MASK, to stop PAE thinking
junk in the upper word is good; and x86_64 should follow x86_32's stricter
comparison, to stop thinking any subset of required bits is good); but that
should be a later patch.
Fix Hans' good observation that follow_page() will never find pmd_huge()
because that would have already failed the pmd_bad test: test pmd_huge in
between the pmd_none and pmd_bad tests. Tighten x86's pmd_huge() check?
No, once it's a hugepage entry, it can get quite far from a good pmd: for
example, PROT_NONE leaves it with only ACCESSED of the KERN_PGTABLE bits.
However... though follow_page() contains this and another test for huge
pages, so it's nice to keep it working on them, where does it actually get
called on a huge page? get_user_pages() checks is_vm_hugetlb_page(vma) to
to call alternative hugetlb processing, as does unmap_vmas() and others.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Earlier-version-tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeff Chua <jeff.chua.linux@gmail.com>
Cc: Hans Rosenfeld <hans.rosenfeld@amd.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
[PATCH] fix SMP ordering hole in fcntl_setlk()
[PATCH] kill ->put_inode
[PATCH] fix reservation discarding in affs
|
|
And with that last patch to affs killing the last put_inode instance we
can finally, after many years of transition kill this racy and awkward
interface.
(It's kinda funny that even the description in
Documentation/filesystems/vfs.txt was entirely wrong..)
Also remove a very misleading comment above the defintion of
struct super_operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.farnsworth.org/dale/linux-2.6-mv643xx_eth into upstream
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (27 commits)
pata_atiixp: Don't disable
sata_inic162x: update intro comment, up the version and drop EXPERIMENTAL
sata_inic162x: add cardbus support
sata_inic162x: kill now unused SFF related stuff
sata_inic162x: use IDMA for ATAPI commands
sata_inic162x: use IDMA for non DMA ATA commands
sata_inic162x: kill now unused bmdma related stuff
sata_inic162x: use IDMA for ATA_PROT_DMA
sata_inic162x: update TF read handling
sata_inic162x: add / update constants
sata_inic162x: misc clean ups
sata_mv use hweight16() for bit counting (V2)
sata_mv NCQ-EH for FIS-based switching
sata_mv delayed eh handling
libata: export ata_eh_analyze_ncq_error
sata_mv new mv_port_intr function
sata_mv fix mv_host_intr bug for hc_irq_cause
sata_mv NCQ and SError fixes for mv_err_intr
sata_mv rearrange mv_config_fbs
sata_mv errata workaround for sata25 part 1
...
|
|
Declared some things static, declared some things in the header.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
|
Export ata_eh_analyze_ncq_error() for subsequent use by sata_mv,
as suggested by Tejun.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
|
The new 440x6 core used on AMCC 460EX/GT introduces new storage attibure
fields to the TLB2 word. Those are:
Bit 11 12 13 14 15
WL1 IL1I IL1D IL2I IL2D
With these bits the cache (L1 and L2) can be configured in a more flexible
way, instruction- and data-cache independently now. The "old" I and W bits
are still available and setting these old bits will automically set these
new bits too (for backward compatibilty).
The current code does not clear these fields resulting in disabling the cache
by chance. This patch now makes sure that these new bits are cleared when
the TLB2 word is written.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
|
|
Some controllers (jmb and inic162x) use 0x77 and 0x7f to indicate that
the device isn't ready yet. It looks like they use 0xff if device
presence is detected but connection isn't established. 0x77 or 0x7f
after connection is established and use the value from signature FIS
after receiving it.
This patch implements ata_check_ready(), which takes TF status value
and determines whether the port is ready or not considering the above
and other conditions, and use it in @check_ready() functions. This is
safe as both 0x77 and 0x7f aren't valid ready status value even though
they have BSY bit cleared.
This fixes hot plug detection failures which can be triggered with
certain drives if they aren't already spun up when the data connector
is hot plugged.
Tested on sil, sil24, ahci (jmb/ich), piix and inic162x combined with
eight drives from all major vendors.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
net_cls_act: act_simple dont ignore realloc code
iwlwifi: make IWLWIFI a tristate
Revert "atm: Do not free already unregistered net device."
dccp: return -EINVAL on invalid feature length
irda: fix !PNP support for drivers/net/irda/smsc-ircc2.c
irda: fix !PNP support in drivers/net/irda/nsc-ircc.c
net_cls_act: Make act_simple use of netlink policy.
ip: Use inline function dst_metric() instead of direct access to dst->metric[]
ip: Make use of the inline function dst_metric_locked()
atm: Bad locking on br2684_devs modifications.
atm: Do not free already unregistered net device.
mac80211: Do not free net device after it is unregistered.
bridge: Consolidate error paths in br_add_bridge().
bridge: Net device leak in br_add_bridge().
niu: Fix probing regression for maramba on-board chips.
lapbeth: Release ->ethdev when unregistering device.
xfrm: convert empty xfrm_audit_* macros to functions
net: Fix useless comment reference loop.
sch_htb: remove from event queue in htb_parent_to_leaf()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-fixes:
sched: default to n for GROUP_SCHED and FAIR_GROUP_SCHED
sched: add optional support for CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
sched, x86: add HAVE_UNSTABLE_SCHED_CLOCK
sched: fix cpu clock
sched: fair-group: fix a Div0 error of the fair group scheduler
sched: fix missing locking in sched_domains code
sched: make clock sync tunable by architecture code
sched: fix debugging
sched: fix sched_info_switch not being called according to documentation
sched: fix hrtick_start_fair and CPU-Hotplug
sched: fix SCHED_FAIR wake-idle logic error
sched: fix RT task-wakeup logic
sched: add statics, don't return void expressions
sched: add debug checks to idle functions
sched: remove old sched doc
sched: make rt_sched_class, idle_sched_class static
sched: optimize calc_delta_mine()
sched: fix normalized sleeper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'powerpc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] Assign PDE->data before gluing PDE into /proc tree
[POWERPC] devres: Add devm_ioremap_prot()
[POWERPC] macintosh: ADB driver: adb_handler_sem semaphore to mutex
[POWERPC] macintosh: windfarm_smu_sat: semaphore to mutex
[POWERPC] macintosh: therm_pm72: driver_lock semaphore to mutex
|
|
this replaces the rq->clock stuff (and possibly cpu_clock()).
- architectures that have an 'imperfect' hardware clock can set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
- the 'jiffie' window might be superfulous when we update tick_gtod
before the __update_sched_clock() call in sched_clock_tick()
- cpu_clock() might be implemented as:
sched_clock_cpu(smp_processor_id())
if the accuracy proves good enough - how far can TSC drift in a
single jiffie when considering the filtering and idle hooks?
[ mingo@elte.hu: various fixes and cleanups ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
make time_sync_thresh tunable to architecture code.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Dmitry Adamushko pointed out a logic error in task_wake_up_rt() where we
will always evaluate to "true". You can find the thread here:
http://lkml.org/lkml/2008/4/22/296
In reality, we only want to try to push tasks away when a wake up request is
not going to preempt the current task. So lets fix it.
Note: We introduce test_tsk_need_resched() instead of open-coding the flag
check so that the merge-conflict with -rt should help remind us that we
may need to support NEEDS_RESCHED_DELAYED in the future, too.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
CC: Dmitry Adamushko <dmitry.adamushko@gmail.com>
CC: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
x86 PCI: call dmi_check_pciprobe()
x86/pci: add pci=skip_isa_align command lines.
x86/pci: remove flag in pci_cfg_space_size_ext
x86: fix section mismatch in pci_scan_bus
|
|
Remove the rest of the old mac_esp driver. Also ditch the rest of the
machw mechanism, it needs to be replaced by a fake openfirmware tree.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Noticed by sparse:
arch/x86/kernel/kgdb.c:556:15: warning: symbol 'kgdb_arch_pc' was not declared. Should it be static?
kernel/kgdb.c:149:8: warning: symbol 'kgdb_do_roundup' was not declared. Should it be static?
kernel/kgdb.c:193:22: warning: symbol 'kgdb_arch_pc' was not declared. Should it be static?
kernel/kgdb.c:712:5: warning: symbol 'remove_all_break' was not declared. Should it be static?
Related to kgdb_hex2long:
arch/x86/kernel/kgdb.c:371:28: warning: incorrect type in argument 2 (different signedness)
arch/x86/kernel/kgdb.c:371:28: expected long *long_val
arch/x86/kernel/kgdb.c:371:28: got unsigned long *<noident>
kernel/kgdb.c:469:27: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:469:27: expected long *long_val
kernel/kgdb.c:469:27: got unsigned long *<noident>
kernel/kgdb.c:470:27: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:470:27: expected long *long_val
kernel/kgdb.c:470:27: got unsigned long *<noident>
kernel/kgdb.c:894:27: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:894:27: expected long *long_val
kernel/kgdb.c:894:27: got unsigned long *<noident>
kernel/kgdb.c:895:27: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:895:27: expected long *long_val
kernel/kgdb.c:895:27: got unsigned long *<noident>
kernel/kgdb.c:1127:28: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:1127:28: expected long *long_val
kernel/kgdb.c:1127:28: got unsigned long *<noident>
kernel/kgdb.c:1132:25: warning: incorrect type in argument 2 (different signedness)
kernel/kgdb.c:1132:25: expected long *long_val
kernel/kgdb.c:1132:25: got unsigned long *<noident>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
|
|
We provide an ioremap_flags, so this provides a corresponding
devm_ioremap_prot. The slight name difference is at Ben
Herrenschmidt's request as he plans on changing ioremap_flags to
ioremap_prot in the future.
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Tejun Heo <htejun@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Signed-off-by: Satoru SATOH <satoru.satoh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, page fault handlers don't issue a mfc restart if the context
switch pending flag is set, which can leave us with a hanging DMA after
a context restore.
This patch introduces fault pending flag that is set by the fault
handler and read by the context switch code, so that the latter can add
the restart bit at the right spot, after it has successfuly saved the
state of the mfc control register.
Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
|
|
SPU class 0 & 1 exceptions may occur in parallel, so we may end up
overwriting csa.dsisr.
This change adds dedicated fields for each class to the spu and the spu
context so that fault data is not overwritten.
Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-inttypes:
fix asm-mips/types.h syntax error
fix asm-alpha/types.h breakage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes:
x86: fix setup printk format warning
x86: olpc build fix
x86: video/fbdev.c: add MODULE_LICENSE
x86: fix up bootparam.h for userspace inclusion
x86: relocs ELF handling - use SELFMAG instead of numeric constant
x86: vdso ELF handling - use SELFMAG instead of numeric constant
x86: remove dell reboot dmi quirk board name match
x86: es7000 build fix
x86: make additional_cpus static
x86: make start_secondary() static
kbuild, suspend, x86: fix rebuild of wakeup.bin
uml: fix gcc problem
x86: undo visws/numaq build changes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm
* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
x86: KVM geust: make setup_secondary_clock definition dependent on local apic
KVM: MMU: Allow more than PAGES_PER_HPAGE write protections per large page
KVM: avoid fx_init() schedule in atomic
KVM: Avoid spurious execeptions after setting registers
KVM: PIT: support mode 4
KVM: x86 emulator: disable writeback on lmsw
KVM: ppc: deliver INTERRUPT_FP_UNAVAIL to the guest
KVM: ppc: Handle guest idle by emulating MSR[WE] writes
KVM: x86: task switch: fix wrong bit setting for the busy flag
KVM: VMX: Enable EPT feature for KVM
KVM: VMX: Prepare an identity page table for EPT in real mode
KVM: Export necessary function for EPT
KVM: MMU: Remove #ifdef CONFIG_X86_64 to support 4 level EPT
KVM: MMU: Add EPT support
KVM: Add kvm_x86_ops get_tdp_level()
KVM: MMU: Move some definitions to a header file
KVM: VMX: EPT Feature Detection
|
|
x86.git testing found the following build failure on v2.6.26-rc1:
In file included from include/linux/kobject.h:22,
from include/linux/module.h:17,
from include/linux/crypto.h:22,
from arch/x86/kernel/asm-offsets_32.c:8,
from arch/x86/kernel/asm-offsets.c:3:
include/linux/sysfs.h:201: error: redefinition of 'sysfs_update_group'
include/linux/sysfs.h:195: error: previous definition of 'sysfs_update_group' was here
make[1]: *** [arch/x86/kernel/asm-offsets.s] Error 1
make: *** [prepare0] Error 2
with the following config:
http://redhat.com/~mingo/misc/config-Sun_May__4_07_09_30_CEST_2008.bad
the reason for the build failure is the duplicate definition of the
sysfs_update_group() inline function in include/linux/sysfs.h.
The duplication was a merge error: it was added via -mm by commit
v2.6.25-7262-g2850699, "sysfs: sysfs_update_group stub for
CONFIG_SYSFS=n" a day before v2.6.26-rc1, but a day before that the same
commit was already merged upstream via the sysfs tree, with commit
v2.6.25-7211-g1cbfb7a.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch fixes the following compile error caused by
commit 23cf11ddb5099f8c7f7cb3eb154bff0faf31cae9
(mips: types: use <asm-generic/int-*.h> for the mips architecture):
<-- snip -->
...
CC kernel/bounds.s
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/types.h:12,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/page-flags.h:8,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/bounds.c:9:
include2/asm/types.h:56:2: error: #endif without #if
make[2]: *** [kernel/bounds.s] Error 1
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
This patch fixes the following compile error on alpha caused by
commit 3726c23df8e4d95b6f2b335dfa90e3f4850a8a00
(alpha: types: use <asm-generic/int-*.h> for the alpha architecture):
<-- snip -->
...
CC arch/alpha/kernel/asm-offsets.s
In file included from include2/asm/topology.h:6,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/topology.h:34,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/mmzone.h:683,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/gfp.h:4,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/slab.h:12,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/percpu.h:5,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/rcupdate.h:39,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/pid.h:4,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/sched.h:74,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/alpha/kernel/asm-offsets.c:9:
include2/asm/machvec.h:44: error: expected declaration specifiers or '...' before 'dma_addr_t'
include2/asm/machvec.h:44: error: expected declaration specifiers or '...' before 'dma_addr_t'
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/alpha/kernel/asm-offsets.c:12:
include2/asm/io.h:94: warning: type defaults to 'int' in declaration of 'dma_addr_t'
include2/asm/io.h:94: warning: variable 'dma_addr_t' declared 'inline'
include2/asm/io.h:94: error: expected ',' or ';' before 'isa_page_to_bus'
make[2]: *** [arch/alpha/kernel/asm-offsets.s] Error 1
<-- snip -->
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
commit 8b664aa66e824a0ddf4ec56d41fa0cf7bb374de6 (x86, boot: add linked
list of struct setup_data) put a new struct in bootparam.h, but didn't
use the userspace-safe types.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Huang Ying <ying.huang@intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This make sure not to schedule in atomic during fx_init. I also
changed the name of fpu_init to fx_finit to avoid duplicating the name
with fpu_init that is already used in the kernel, this makes grep
simpler if nothing else.
Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
This reduces host CPU usage when the guest is idle. However, the guest must
set MSR[WE] in its idle loop, which Linux did not do until 2.6.26.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
[aliguory: plug leak]
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
Enable kvm_set_spte() to generate EPT entries.
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
The function get_tdp_level() provided the number of tdp level for EPT and
NPT rather than the NPT specific macro.
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
Each time a pxa type cpu went in suspend, a portion of
kmalloc memory was corrupted.
The issue was an incorrect length allocation introduced by
the commit 711be5ccfe9a02ba560aa918a008c31ea4760163 for
the save registers array (=> overflow).
Signed-off-by: Robert Jarzmik <rjarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
it removes these warnings when CONFIG_AUDITSYSCALL is unset:
net/xfrm/xfrm_user.c: In function 'xfrm_add_sa':
net/xfrm/xfrm_user.c:412: warning: unused variable 'sid'
net/xfrm/xfrm_user.c:411: warning: unused variable 'sessionid'
net/xfrm/xfrm_user.c:410: warning: unused variable 'loginuid'
net/xfrm/xfrm_user.c: In function 'xfrm_del_sa':
net/xfrm/xfrm_user.c:485: warning: unused variable 'sid'
net/xfrm/xfrm_user.c:484: warning: unused variable 'sessionid'
net/xfrm/xfrm_user.c:483: warning: unused variable 'loginuid'
net/xfrm/xfrm_user.c: In function 'xfrm_add_policy':
net/xfrm/xfrm_user.c:1132: warning: unused variable 'sid'
net/xfrm/xfrm_user.c:1131: warning: unused variable 'sessionid'
net/xfrm/xfrm_user.c:1130: warning: unused variable 'loginuid'
net/xfrm/xfrm_user.c: In function 'xfrm_get_policy':
net/xfrm/xfrm_user.c:1382: warning: unused variable 'sid'
net/xfrm/xfrm_user.c:1381: warning: unused variable 'sessionid'
net/xfrm/xfrm_user.c:1380: warning: unused variable 'loginuid'
net/xfrm/xfrm_user.c: In function 'xfrm_add_pol_expire':
net/xfrm/xfrm_user.c:1620: warning: unused variable 'sid'
net/xfrm/xfrm_user.c:1619: warning: unused variable 'sessionid'
net/xfrm/xfrm_user.c:1618: warning: unused variable 'loginuid'
net/xfrm/xfrm_user.c: In function 'xfrm_add_sa_expire':
net/xfrm/xfrm_user.c:1658: warning: unused variable 'sid'
net/xfrm/xfrm_user.c:1657: warning: unused variable 'sessionid'
net/xfrm/xfrm_user.c:1656: warning: unused variable 'loginuid'
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
clocksource: allow read access to available/current_clocksource
clocksource: Fix permissions for available_clocksource
hrtimer: remove duplicate helper function
|
|
This replaces the duplicated arch-specific versions of "sys_pipe()" with
one unified implementation. This removes almost 250 lines of duplicated
code.
It's marked __weak, so that *if* an architecture wants to override the
default implementation it can do so by simply having its own replacement
version, since many architectures use alternate calling conventions for
the 'pipe()' system call for legacy reasons (ie traditional UNIX
implementations often return the two file descriptors in registers)
I still haven't changed the cris version even though Linus says the BKL
isn't needed. The arch maintainer can easily do it if there are really
no obstacles.
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* git://git.infradead.org/battery-2.6:
PMU battery: filenames in sysfs with spaces
pda_power: add init and exit function callbacks
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-inttypes: (24 commits)
Make constants in kernel/timeconst.h fixed 64 bits
types: add C99-style constructors to <asm-generic/int-*.h>
xtensa: types: use <asm-generic/int-*.h> for the xtensa architecture
x86: types: use <asm-generic/int-*.h> for the x86 architecture
v850: types: use <asm-generic/int-*.h> for the v850 architecture
sparc64: types: use <asm-generic/int-*.h> for the sparc64 architecture
sparc: types: use <asm-generic/int-*.h> for the sparc architecture
sh: types: use <asm-generic/int-*.h> for the sh architecture
s390: types: use <asm-generic/int-*.h> for the s390 architecture
powerpc: types: use <asm-generic/int-*.h> for the powerpc architecture
parisc: types: use <asm-generic/int-*.h> for the parisc architecture
mn10300: types: use <asm-generic/int-*.h> for the mn10300 architecture
mips: types: use <asm-generic/int-*.h> for the mips architecture
m68k: types: use <asm-generic/int-*.h> for the m68k architecture
m32r: types: use <asm-generic/int-*.h> for the m32r architecture
ia64: types: use <asm-generic/int-*.h> for the ia64 architecture
h8300: types: use <asm-generic/int-*.h> for the h8300 architecture
frv: types: use <asm-generic/int-*.h> for the frv architecture
cris: types: use <asm-generic/int-*.h> for the cris architecture
blackfin: types: use <asm-generic/int-*.h> for the blackfin architecture
...
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
rose: Wrong list_lock argument in rose_node seqops
netns: Fix reassembly timer to use the right namespace
netns: Fix device renaming for sysfs
bnx2: Update version to 1.7.5.
bnx2: Update RV2P firmware for 5709.
bnx2: Zero out context memory for 5709.
bnx2: Fix register test on 5709.
bnx2: Fix remote PHY initial link state.
bnx2: Refine remote PHY locking.
bridge: forwarding table information for >256 devices
tg3: Update version to 3.92
tg3: Add link state reporting to UMP firmware
tg3: Fix ethtool loopback test for 5761 BX devices
tg3: Fix 5761 NVRAM sizes
tg3: Use constant 500KHz MI clock on adapters with a CPMU
hci_usb.h: fix hard-to-trigger race
dccp: ccid2.c, ccid3.c use clamp(), clamp_t()
net: remove NR_CPUS arrays in net/core/dev.c
net: use get/put_unaligned_* helpers
bluetooth: use get/put_unaligned_* helpers
...
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc32: Delete prom_stdin and prom_stdout.
sparc32: More memory probing consolidation.
sparc32: Kill totally unused memory information tables.
sparc64: Fix syscall restart, for real...
serial: Fix sparc driver name strings.
sparc64: Stop creating dummy root PCI host controller devices.
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] Bolt in SLB entry for kernel stack on secondary cpus
[POWERPC] PS3: Update ps3_defconfig
[POWERPC] PS3: Remove unsupported wakeup sources
[POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static
[POWERPC] PS3: Add time include to lpm
[POWERPC] Fix slb.c compile warnings
[POWERPC] Xilinx: Fix compile warnings
[POWERPC] Squash build warning for print of resource_size_t in fsl_soc.c
[RAPIDIO] fix current kernel-doc notation
[POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot
Fix a potential issue in mpc52xx uart driver
[POWERPC] mpc5200: Allow for fixed speed MII configurations
[POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board
|
