aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2008-01-23Pull dmi-2.6.24 into release branchLen Brown
2008-01-23Revert "ACPI: Fan: Drop force_power_state acpi_device option"Len Brown
This reverts commit 93ad7c07ad487b036add8760dabcc35666a550ef. http://bugzilla.kernel.org/show_bug.cgi?id=9798 Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23ACPI: make _OSI(Linux) console messages smarterLen Brown
If BIOS invokes _OSI(Linux), the kernel response depends on what the ACPI DMI list knows about the system, and that is reflectd in dmesg: 1) System unknown to DMI: ACPI: BIOS _OSI(Linux) query ignored ACPI: DMI System Vendor: LENOVO ACPI: DMI Product Name: 7661W1P ACPI: DMI Product Version: ThinkPad T61 ACPI: DMI Board Name: 7661W1P ACPI: DMI BIOS Vendor: LENOVO ACPI: DMI BIOS Date: 10/18/2007 ACPI: Please send DMI info above to linux-acpi@vger.kernel.org ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org 2) System known to DMI, but effect of OSI(Linux) unknown: ACPI: DMI detected: Lenovo ThinkPad T61 ... ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org 3) System known to DMI, which disables _OSI(Linux): ACPI: DMI detected: Lenovo ThinkPad T61 ... ACPI: BIOS _OSI(Linux) query ignored via DMI 4) System known to DMI, which enable _OSI(Linux): ACPI: DMI detected: Lenovo ThinkPad T61 ACPI: Added _OSI(Linux) ... ACPI: BIOS _OSI(Linux) query honored via DMI cmdline overrides take precidence over the built-in default and the DMI prescribed default. cmdline "acpi_osi=Linux" results in: ACPI: BIOS _OSI(Linux) query honored via cmdline Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23DMI: create dmi_get_slot()Len Brown
This simply allows other sub-systems (such as ACPI) to access and print out slots in static dmi_ident[]. Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23DMI: move dmi_available declaration to linux/dmi.hLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-22[MIPS] SMTC: Fix build error.Frank Rowand
Fix compile warning (which becomes compile error due to -Werror). Type of argument "flags" for spin_lock_irqsave() was incorrect in some functions. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-17CRIS v10: vmlinux.lds.S: ix kernel oops on boot and use common definesJesper Nilsson
- Move alignment to page size of init data outside ifdef for BLK_DEV_INITRD. The reservation up to page size of memory after init data was previously not done if BLK_DEV_INITRD was undefined. This caused a kernel oops when init memory pages were freed after startup, data placed in the same page as the last init memory would also be freed and reused, with disastrous results. - Use macros for initcalls and .text sections. - Replace hardcoded page size constant with PAGE_SIZE define. - Change include/asm-cris/page.h to use the _AC macro to instead of testing __ASSEMBLY__. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-16lockdep: fix workqueue creation API lockdep interactionJohannes Berg
Dave Young reported warnings from lockdep that the workqueue API can sometimes try to register lockdep classes with the same key but different names. This is not permitted in lockdep. Unfortunately, I was unaware of that restriction when I wrote the code to debug workqueue problems with lockdep and used the workqueue name as the lockdep class name. This can obviously lead to the problem if the workqueue name is dynamic. This patch solves the problem by always using a constant name for the workqueue's lockdep class, namely either the constant name that was passed in or a string consisting of the variable name. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2008-01-15libata: correct handling of TSS DVDAlan Cox
Devices that misreport the validity bit for word 93 look like SATA. If they are on the blacklist then we must not test for SATA but assume 40 wire in the 40 wire case (The TSSCorp reports 80 wire on SATA it seems!) Signed-off-by: Alan Cox <alan@redhat.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix RTC_AIE with CONFIG_HPET_EMULATE_RTC x86: asm-x86/msr.h: pull in linux/types.h x86: fix boot crash on HIGHMEM4G && SPARSEMEM
2008-01-15Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix boot failure on POWER6 [POWERPC] Workaround for iommu page alignment
2008-01-15x86: asm-x86/msr.h: pull in linux/types.hMike Frysinger
Since the msr.h header uses types like __u32, it should pull in linux/types.h. [ mingo@elte.hu: affects user-space that includes this header. We dont actually like user-space including raw kernel headers but it's a longstanding practice and it's easy for the kernel to be nice about this. ] Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-15[POWERPC] Fix boot failure on POWER6Paul Mackerras
Commit 473980a99316c0e788bca50996375a2815124ce1 added a call to clear the SLB shadow buffer before registering it. Unfortunately this means that we clear out the entries that slb_initialize has previously set in there. On POWER6, the hypervisor uses the SLB shadow buffer when doing partition switches, and that means that after the next partition switch, each non-boot CPU has no SLB entries to map the kernel text and data, which causes it to crash. This fixes it by reverting most of 473980a9 and instead clearing the 3rd entry explicitly in slb_initialize. This fixes the problem that 473980a9 was trying to solve, but without breaking POWER6. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-14Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Cacheops.h: Fix typo. [MIPS] Cobalt: Qube1 has no serial port so don't use it [MIPS] Cobalt: Fix ethernet interrupts for RaQ1 [MIPS] Kconfig fixes for BCM47XX platform
2008-01-14Revert "writeback: introduce writeback_control.more_io to indicate more io"Linus Torvalds
This reverts commit 2e6883bdf49abd0e7f0d9b6297fc3be7ebb2250b, as requested by Fengguang Wu. It's not quite fully baked yet, and while there are patches around to fix the problems it caused, they should get more testing. Says Fengguang: "I'll resend them both for -mm later on, in a more complete patchset". See http://bugzilla.kernel.org/show_bug.cgi?id=9738 for some of this discussion. Requested-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-15[MIPS] Cacheops.h: Fix typo.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-14Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-sibyte: Fix an error path i2c: Driver IDs are optional i2c: Spelling fixes i2c-omap: Fix NULL pointer dereferencing
2008-01-14i2c: Driver IDs are optionalJean Delvare
Document the fact that I2C driver IDs are optional. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-14CRIS: define __ARCH_WANT_SYS_RT_SIGSUSPEND in unistd.h for CRISJesper Nilsson
This allows us to use the commong sys_rt_sigsuspend instead of having our own. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-13Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] vfp: fix fuitod/fsitod instructions [ARM] pxa: silence warnings from cpu_is_xxx() macros
2008-01-13Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix CPU hotplug when using the SLB shadow buffer [POWERPC] efika: add phy-handle property for fec_mpc52xx
2008-01-13Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: pnpacpi: print resource shortage message only once PM: ACPI and APM must not be enabled at the same time ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9 ACPICA: fix acpi_serialize hang regression ACPI : Not register gsi for PCI IDE controller in legacy mode ACPI: Reintroduce run time configurable max_cstate for !CPU_IDLE case ACPI: Make sysfs interface in ACPI power optional. ACPI: EC: Enable boot EC before bus_scan increase PNP_MAX_PORT to 40 from 24
2008-01-13remove task_ppid_nr_nsRoland McGrath
task_ppid_nr_ns is called in three places. One of these should never have called it. In the other two, using it broke the existing semantics. This was presumably accidental. If the function had not been there, it would have been much more obvious to the eye that those patches were changing the behavior. We don't need this function. In task_state, the pid of the ptracer is not the ppid of the ptracer. In do_task_stat, ppid is the tgid of the real_parent, not its pid. I also moved the call outside of lock_task_sighand, since it doesn't need it. In sys_getppid, ppid is the tgid of the real_parent, not its pid. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24: sh: Force __access_ok() to obey address space limit. sh: Fix argument page dcache flushing regression.
2008-01-11Pull bugzilla-9535 into release branchLen Brown
2008-01-11Pull bugzilla-9194 into release branchLen Brown
2008-01-11PM: ACPI and APM must not be enabled at the same timeLen Brown
ACPI and APM used "pm_active" to guarantee that they would not be simultaneously active. But pm_active was recently moved under CONFIG_PM_LEGACY, so that without CONFIG_PM_LEGACY, pm_active became a NOP -- allowing ACPI and APM to both be simultaneously enabled. This caused unpredictable results, including boot hangs. Further, the code under CONFIG_PM_LEGACY is scheduled for removal. So replace pm_active with pm_flags. pm_flags depends only on CONFIG_PM, which is present for both CONFIG_APM and CONFIG_ACPI. http://bugzilla.kernel.org/show_bug.cgi?id=9194 Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2008-01-11Don't blatt first element of prv in sg_chain()Rusty Russell
I realize that sg chaining is a ploy to make the rest of the kernel devs feel the pain of the SCSI subsystem. But this was a little unsubtle. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-11[POWERPC] Fix CPU hotplug when using the SLB shadow bufferMichael Neuling
Before we register the SLB shadow buffer, we need to invalidate the entries in the buffer, otherwise we can end up stale entries from when we previously offlined the CPU. This does this invalidate as well as unregistering the buffer with PHYP before we offline the cpu. Tested and fixes crashes seen on 970MP (thanks to tonyb) and POWER5. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-11ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9Zhao Yakui
It is important that these resources be reserved to avoid conflicts with well known ACPI registers. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-11sh: Force __access_ok() to obey address space limit.Paul Mundt
When the thread_info->addr_limit changes were introduced, __access_ok() was missed in the conversion, allowing user processes to perform P1/P2 accesses under certain conditions. This has already been corrected with the nommu refactoring in later kernels. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-10[ARM] pxa: silence warnings from cpu_is_xxx() macrosRussell King
If only a single CPU type is selected, __cpu_is_xxx() doesn't use its argument. This causes the compiler to issue a warning about an unused variable in the parent function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-08[SOCK]: Adds a rcu_dereference() in sk_filterEric Dumazet
It seems commit fda9ef5d679b07c9d9097aaf6ef7f069d794a8f9 introduced a RCU protection for sk_filter(), without a rcu_dereference() Either we need a rcu_dereference(), either a comment should explain why we dont need it. I vote for the former. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[XFRM]: xfrm_algo_clone() allocates too much memoryEric Dumazet
alg_key_len is the length in bits of the key, not in bytes. Best way to fix this is to move alg_len() function from net/xfrm/xfrm_user.c to include/net/xfrm.h, and to use it in xfrm_algo_clone() alg_len() is renamed to xfrm_alg_len() because of its global exposition. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[NET]: Clone the sk_buff 'iif' field in __skb_clone()Paul Moore
Both NetLabel and SELinux (other LSMs may grow to use it as well) rely on the 'iif' field to determine the receiving network interface of inbound packets. Unfortunately, at present this field is not preserved across a skb clone operation which can lead to garbage values if the cloned skb is sent back through the network stack. This patch corrects this problem by properly copying the 'iif' field in __skb_clone() and removing the 'iif' field assignment from skb_act_clone() since it is no longer needed. Also, while we are here, put the assignments in the same order as the offsets to reduce cacheline bounces. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[NET]: Add NAPI_STATE_DISABLE.David S. Miller
Create a bit to signal that a napi_disable() is in progress. This sets up infrastructure such that net_rx_action() can generically break out of the ->poll() loop on a NAPI context that has a pending napi_disable() yet is being bombed with packets (and thus would otherwise poll endlessly and not allow the napi_disable() to finish). Now, what napi_disable() does is first set the NAPI_STATE_DISABLE bit (to indicate that a disable is pending), then it polls for the NAPI_STATE_SCHED bit, and once the NAPI_STATE_SCHED bit is acquired the NAPI_STATE_DISABLE bit is cleared. Here, the test_and_set_bit() provides the necessary memory barrier between the various bitops. napi_schedule_prep() now tests for a pending disable as it's first action and won't try to obtain the NAPI_STATE_SCHED bit if a disable is pending. As a result, we can remove the netif_running() check in netif_rx_schedule_prep() because the NAPI disable pending state serves this purpose. And, it does so in a NAPI centric manner which is what we really want. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[NET]: Do not grab device reference when scheduling a NAPI poll.David S. Miller
It is pointless, because everything that can make a device go away will do a napi_disable() first. The main impetus behind this is that now we can legally do a NAPI completion in generic code like net_rx_action() which a following changeset needs to do. net_rx_action() can only perform actions in NAPI centric ways, because there may be a one to many mapping between NAPI contexts and network devices (SKY2 is one example). We also want to get rid of this because it's an extra atomic in the NAPI paths, and also because it is one of the last instances where the NAPI interfaces care about net devices. The one remaining netdev detail the NAPI stuff cares about is the netif_running() check which will be killed off in a subsequent changeset. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08[SCTP]: Fix the name of the authentication event.Vlad Yasevich
The even should be called SCTP_AUTHENTICATION_INDICATION. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-08pl2303: Fix mode switching regressionAlan Cox
Cleaning out all the incorrect 'no change made' checks for termios settings showed up a problem with the PL2303. The hardware here seems to lose sync and bits if you tell it to make no changes. This shows up with a real world application. To fix this the driver check for meaningful hardware changes is restored but doing the tests correctly and as a tty layer function so it doesn't get duplicated wrongly everywhere if other drivers turn out to need it. Signed-off-by: Alan Cox <alan@redhat.com> Tested-by: Mirko Parthey <mirko.parthey@informatik.tu-chemnitz.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-08KEYS: fix macroSebastian Siewior
Commit 664cceb0093b755739e56572b836a99104ee8a75 changed the parameters of the function make_key_ref(). The macros that are used in case CONFIG_KEY is not defined did not change. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-07sh: Fix argument page dcache flushing regression.Carmelo Amoroso
In the do_execve() path, argument page handling used to explicitly call flush_dcache_page() for each page, this has since been reworked and uses flush_kernel_dcache_page() instead, which is presently a nop. Doing a simple modprobe/rmmod in a loop under busybox consistently manages to crash without providing a sane flush_kernel_dcache_page() implementation, so, plug in a simple implementation. Signed-off-by: Carmelo Amoroso <carmelo73@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-06CPU hotplug: fix cpu_is_offline() on !CONFIG_HOTPLUG_CPUIngo Molnar
make randconfig bootup testing found that the cpufreq code crashes on bootup, if the powernow-k8 driver is enabled and if maxcpus=1 passed on the boot line to a !CONFIG_HOTPLUG_CPU kernel. First lockdep found out that there's an inconsistent unlock sequence: ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- swapper/1 is trying to release lock (&per_cpu(cpu_policy_rwsem, cpu)) at: [<ffffffff806ffd8e>] unlock_policy_rwsem_write+0x3c/0x42 but there are no more locks to release! Call Trace: [<ffffffff806ffd8e>] unlock_policy_rwsem_write+0x3c/0x42 [<ffffffff80251c29>] print_unlock_inbalance_bug+0x104/0x12c [<ffffffff80252f3a>] mark_held_locks+0x56/0x94 [<ffffffff806ffd8e>] unlock_policy_rwsem_write+0x3c/0x42 [<ffffffff807008b6>] cpufreq_add_dev+0x2a8/0x5c4 ... then shortly afterwards the cpufreq code crashed on an assert: ------------[ cut here ]------------ kernel BUG at drivers/cpufreq/cpufreq.c:1068! invalid opcode: 0000 [1] SMP [...] Call Trace: [<ffffffff805145d6>] sysdev_driver_unregister+0x5b/0x91 [<ffffffff806ff520>] cpufreq_register_driver+0x15d/0x1a2 [<ffffffff80cc0596>] powernowk8_init+0x86/0x94 [...] ---[ end trace 1e9219be2b4431de ]--- the bug was caused by maxcpus=1 bootup, which brought up the secondary core as !cpu_online() but !cpu_is_offline() either, which on on !CONFIG_HOTPLUG_CPU is always 0 (include/linux/cpu.h): /* CPUs don't go offline once they're online w/o CONFIG_HOTPLUG_CPU */ static inline int cpu_is_offline(int cpu) { return 0; } but the cpufreq code uses cpu_online() and cpu_is_offline() in a mixed way - the low-level drivers use cpu_online(), while the cpufreq core uses cpu_is_offline(). This opened up the possibility to add the non-initialized sysdev device of the secondary core: cpufreq-core: trying to register driver powernow-k8 cpufreq-core: adding CPU 0 powernow-k8: BIOS error - no PSB or ACPI _PSS objects cpufreq-core: initialization failed cpufreq-core: adding CPU 1 cpufreq-core: initialization failed which then blew up. The fix is to make cpu_is_offline() always the negation of cpu_online(). With that fix applied the kernel boots up fine without crashing: Calling initcall 0xffffffff80cc0510: powernowk8_init+0x0/0x94() powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (1 cpu cores) (version 2.20.00) powernow-k8: BIOS error - no PSB or ACPI _PSS objects initcall 0xffffffff80cc0510: powernowk8_init+0x0/0x94() returned -19. initcall 0xffffffff80cc0510 ran for 19 msecs: powernowk8_init+0x0/0x94() Calling initcall 0xffffffff80cc328f: init_lapic_nmi_sysfs+0x0/0x39() We could fix this by making CPU enumeration aware of max_cpus, but that would be more fragile IMO, and the cpu_online(cpu) != cpu_is_offline(cpu) possibility was quite confusing and a continuous source of bugs too. Most distributions have kernels with CPU hotplug enabled, so this bug remained hidden for a long time. Bug forensics: The broken cpu_is_offline() API variant was introduced via: commit a59d2e4e6977e7b94e003c96a41f07e96cddc340 Author: Rusty Russell <rusty@rustcorp.com.au> Date: Mon Mar 8 06:06:03 2004 -0800 [PATCH] minor cleanups for hotplug CPUs ( this predates linux-2.6.git, this commit is available from Thomas's historic git tree. ) Then 1.5 years later the cpufreq code made use of it: commit c32b6b8e524d2c337767d312814484d9289550cf Author: Ashok Raj <ashok.raj@intel.com> Date: Sun Oct 30 14:59:54 2005 -0800 [PATCH] create and destroy cpufreq sysfs entries based on cpu notifiers + if (cpu_is_offline(cpu)) + return 0; which is a correct use of the subtly broken new API. v2.6.15 then shipped with this bug included. then it took two more years for random-kernel qa to hit it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""Linus Torvalds
This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d. It turns out that the bug that was triggered by that commit was apparently not actually triggered by that commit at all, and just the testing conditions had changed enough to make it appear to be due to it. The real problem seems to have been found by Peter Osterlund: "pktcdvd sets it [block device size] when opening the /dev/pktcdvd device, but when the drive is later opened as /dev/scd0, there is nothing that sets it back. (Btw, 40944 is possible if the disk is a CDRW that was formatted with "cdrwtool -m 10236".) The problem is that pktcdvd opens the cd device in non-blocking mode when pktsetup is run, and doesn't close it again until pktsetup -d is run. The effect is that if you meanwhile open the cd device, blkdev.c:do_open() doesn't call bd_set_size() because bdev->bd_openers is non-zero." In particular, to repeat the bug (regardless of whether commit 6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not): " 1. Start with an empty drive. 2. pktsetup 0 /dev/scd0 3. Insert a CD containing an isofs filesystem. 4. mount /dev/pktcdvd/0 /mnt/tmp 5. umount /mnt/tmp 6. Press the eject button. 7. Insert a DVD containing a non-writable filesystem. 8. mount /dev/scd0 /mnt/tmp 9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null 10. If the DVD contains data beyond the physical size of a CD, you get I/O errors in the terminal, and dmesg reports lots of "attempt to access beyond end of device" errors." which in turn is because the nested open after the media change won't cause the size to be set properly (because the original open still holds the block device, and we only do the bd_set_size() when we don't have other people holding the device open). The proper fix for that is probably to just do something like bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9; in fs/block_dev.c:do_open() even for the cases where we're not the original opener (but *not* call bd_set_size(), since that will also change the block size of the device). Cc: Peter Osterlund <petero2@telia.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-03[IA64] Update Altix BTE error return status patchRuss Anderson
I neglected to send Tony the most recent version of the patch ("Fix Altix BTE error return status") applied as commit: 64135fa97ce016058f95345425a9ebd04ee1bd2a This patch gets it up to date. Without this patch on shub2, if there is no error xpcBteUnmappedError is returned instead of xpcSuccess. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-01-02restrict reading from /proc/<pid>/maps to those who share ->mm or can ptrace pidAl Viro
Contents of /proc/*/maps is sensitive and may become sensitive after open() (e.g. if target originally shares our ->mm and later does exec on suid-root binary). Check at read() (actually, ->start() of iterator) time that mm_struct we'd grabbed and locked is - still the ->mm of target - equal to reader's ->mm or the target is ptracable by reader. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-02scsi: revert "[SCSI] Get rid of scsi_cmnd->done"Ingo Molnar
This reverts commit 6f5391c283d7fdcf24bf40786ea79061919d1e1d ("[SCSI] Get rid of scsi_cmnd->done") that was supposed to be a cleanup commit, but apparently it causes regressions: Bug 9370 - v2.6.24-rc2-409-g9418d5d: attempt to access beyond end of device http://bugzilla.kernel.org/show_bug.cgi?id=9370 this patch should be reintroduced in a more split-up form to make testing of it easier. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-02Unify /proc/slabinfo configurationLinus Torvalds
Both SLUB and SLAB really did almost exactly the same thing for /proc/slabinfo setup, using duplicate code and per-allocator #ifdef's. This just creates a common CONFIG_SLABINFO that is enabled by both SLUB and SLAB, and shares all the setup code. Maybe SLOB will want this some day too. Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix asm-x86/msr.h for user-space export x86: fix asm-x86/byteorder.h for userspace export
2008-01-01slub: provide /proc/slabinfoPekka J Enberg
This adds a read-only /proc/slabinfo file on SLUB, that makes slabtop work. [ mingo@elte.hu: build fix. ] Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Lameter <clameter@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-01x86: fix asm-x86/msr.h for user-space exportMike Frysinger
Use __asm__ and __volatile__ in code that is exported to userspace. Wrap kernel functions with __KERNEL__ so they get scrubbed. No code changed: text data bss dec hex filename 9681036 1698924 3407872 14787832 e1a4f8 vmlinux.before 9681036 1698924 3407872 14787832 e1a4f8 vmlinux.after Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>