aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2005-11-09Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
2005-11-10[NETLINK]: Generic netlink familyThomas Graf
The generic netlink family builds on top of netlink and provides simplifies access for the less demanding netlink users. It solves the problem of protocol numbers running out by introducing a so called controller taking care of id management and name resolving. Generic netlink modules register themself after filling out their id card (struct genl_family), after successful registration the modules are able to register callbacks to command numbers by filling out a struct genl_ops and calling genl_register_op(). The registered callbacks are invoked with attributes parsed making life of simple modules a lot easier. Although generic netlink modules can request static identifiers, it is recommended to use GENL_ID_GENERATE and to let the controller assign a unique identifier to the module. Userspace applications will then ask the controller and lookup the idenfier by the module name. Due to the current multicast implementation of netlink, the number of generic netlink modules is restricted to 1024 to avoid wasting memory for the per socket multiacst subscription bitmask. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[NETLINK]: Generic netlink receive queue processorThomas Graf
Introduces netlink_run_queue() to handle the receive queue of a netlink socket in a generic way. Processes as much as there was in the queue upon entry and invokes a callback function for each netlink message found. The callback function may refuse a message by returning a negative error code but setting the error pointer to 0 in which case netlink_run_queue() will return with a qlen != 0. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[NETLINK]: Type-safe netlink messages/attributes interfaceThomas Graf
Introduces a new type-safe interface for netlink message and attributes handling. The interface is fully binary compatible with the old interface towards userspace. Besides type safety, this interface features attribute validation capabilities, simplified message contstruction, and documentation. The resulting netlink code should be smaller, less error prone and easier to understand. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-09[NETFILTER]: Add nf_conntrack subsystem.Yasuyuki Kozakai
The existing connection tracking subsystem in netfilter can only handle ipv4. There were basically two choices present to add connection tracking support for ipv6. We could either duplicate all of the ipv4 connection tracking code into an ipv6 counterpart, or (the choice taken by these patches) we could design a generic layer that could handle both ipv4 and ipv6 and thus requiring only one sub-protocol (TCP, UDP, etc.) connection tracking helper module to be written. In fact nf_conntrack is capable of working with any layer 3 protocol. The existing ipv4 specific conntrack code could also not deal with the pecularities of doing connection tracking on ipv6, which is also cured here. For example, these issues include: 1) ICMPv6 handling, which is used for neighbour discovery in ipv6 thus some messages such as these should not participate in connection tracking since effectively they are like ARP messages 2) fragmentation must be handled differently in ipv6, because the simplistic "defrag, connection track and NAT, refrag" (which the existing ipv4 connection tracking does) approach simply isn't feasible in ipv6 3) ipv6 extension header parsing must occur at the correct spots before and after connection tracking decisions, and there were no provisions for this in the existing connection tracking design 4) ipv6 has no need for stateful NAT The ipv4 specific conntrack layer is kept around, until all of the ipv4 specific conntrack helpers are ported over to nf_conntrack and it is feature complete. Once that occurs, the old conntrack stuff will get placed into the feature-removal-schedule and we will fully kill it off 6 months later. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-10[PATCH] ide: explain the PCI bus test we do in <asm-i386/ide.h>Alan Cox
Matthew Wilcox asked that this got a comment explaining why it is done so here it is. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-09[PATCH] ide: CS5535 driverJaya Kumar
Signed-off-by: Jaya Kumar <jayakumar.ide@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-09[PATCH] ide: AMD Geode GX/LX supportJordan Crouse
From: "Jordan Crouse" <jordan.crouse@amd.com> The core IDE engine on the CS5536 is the same as the other AMD southbridges, so unlike the CS5535, we can simply add the appropriate PCI headers to the existing amd74xx code. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-09[PATCH] ide: move CONFIG_IDE_MAX_HWIFS into linux/ide.hBjorn Helgaas
CONFIG_IDE_MAX_HWIFS is a generic thing, no need to have it duplicated by every arch that uses it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-09[PATCH] ide: incorrect device link for ide-csHannes Reinecke
Devices driven by ide-cs will appear under /sys/devices instead of the appropriate PCMCIA device. To fix this I had to extend the hw_regs_t structure with a 'struct device' field, which allows us to set the parent link for the appropriate hwif. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@suse.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-09[NETFILTER] nfnetlink: nfattr_parse() can never fail, make it voidHarald Welte
nfattr_parse (and thus nfattr_parse_nested) always returns success. So we can make them 'void' and remove all the checking at the caller side. Based on original patch by Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-09Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-11-09Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-11-09Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-11-09[PATCH] md: complete conversion of md to use kthreadsNeilBrown
There are a few loose ends following the conversion of md to use kthreads: - Some fields in mdk_thread_t that aren't needed (kthreads does it's own completion and manages it's own name). - thread->run is now never NULL, so no need to check - Some tests for signal_pending that aren't needed (As we don't use signals to stop threads any more) - Some flush_signals are not needed - Some waits are interruptible and don't need to be. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] md: support BIO_RW_BARRIER for md/raid1NeilBrown
We can only accept BARRIER requests if all slaves handle barriers, and that can, of course, change with time.... So we keep track of whether the whole array seems safe for barriers, and also whether each individual rdev handles barriers. We initially assumes barriers are OK. When writing the superblock we try a barrier, and if that fails, we flag things for no-barriers. This will usually clear the flags fairly quickly. If writing the superblock finds that BIO_RW_BARRIER is -ENOTSUPP, we need to resubmit, so introduce function "md_super_wait" which waits for requests to finish, and retries ENOTSUPP requests without the barrier flag. When writing the real raid1, write requests which were BIO_RW_BARRIER but which aresn't supported need to be retried. So raid1d is enhanced to do this, and when any bio write completes (i.e. no retry needed) we remove it from the r1bio, so that devices needing retry are easy to find. We should hardly ever get -ENOTSUPP errors when writing data to the raid. It should only happen if: 1/ the device used to support BARRIER, but now doesn't. Few devices change like this, though raid1 can! or 2/ the array has no persistent superblock, so there was no opportunity to pre-test for barriers when writing the superblock. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] md: make md on-disk bitmaps not host-endianNeilBrown
Current bitmaps use set_bit et.al and so are host-endian, which means not-portable. Oops. Define a new version number (4) for which bitmaps are little-endian. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] md: convert 'faulty' and 'in_sync' fields to bits in 'flags' fieldNeilBrown
This has the advantage of removing the confusion caused by 'rdev_t' and 'mddev_t' both having 'in_sync' fields. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] md: improvements to raid5 handling of read errorsNeilBrown
Two refinements to the 'attempt-overwrite-on-read-error' mechanism. 1/ If the array is read-only, don't attempt an over-write. 2/ If there are more than max_nr_stripes read errors on a device with no success, fail the drive. This will make sure a dead drive will be eventually kicked even when we aren't trying to rewrite (which would normally kick a dead drive more quickly. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] md: change raid5 sysfs attribute to not create a new directoryNeilBrown
There isn't really a need for raid5 attributes to be an a subdirectory, so this patch moves them from /sys/block/mdX/md/raid5/attribute to /sys/block/mdX/md/attribute This suggests that all md personalities should co-operate about namespace usage, but that shouldn't be a problem. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] md: teach raid5 the difference between 'check' and 'repair'.NeilBrown
With this, raid5 can be asked to check parity without repairing it. It also keeps a count of the number of incorrect parity blocks found (mismatches) and reports them through sysfs. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] md: allow a manual resync with mdNeilBrown
You can trigger a 'check' with echo check > /sys/block/mdX/md/scan_mode or a check-and-repair errors with echo repair > /sys/block/mdX/md/scan_mode and read the current state from the same file. Note: personalities need to know the different between 'check' and 'repair', but don't yet. Until they do, 'check' will be the same as 'repair' and will just do a normal resync pass. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] md: add kobject/sysfs support to raid5NeilBrown
/sys/block/mdX/md/raid5/ contains raid5-related attributes. Currently stripe_cache_size is number of entries in stripe cache, and is settable. stripe_cache_active is number of active entries, and in only readable. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] md: extend md sysfs support to component devices.NeilBrown
Each device in an md array how has a corresponding /sys/block/mdX/md/devNN/ directory which can contain attributes. Currently there is only 'state' which summarises the state, nd 'super' which has a copy of the superblock, and 'block' which is a symlink to the block device. Also, /sys/block/mdX/md/rdNN represents slot 'NN' in the array, and is a symlink to the relevant 'devNN'. Obviously spare devices do not have a slot in the array, and so don't have such a symlink. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] md: initial sysfs support for mdNeilBrown
Start using kobjects in mddevs, and provide a couple of simple attributes (level and disks). Attributes live in /sys/block/mdX/md/attr-name Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] md: better handling of readerrors with raid5.NeilBrown
This patch changes the behaviour of raid5 when it gets a read error. Instead of just failing the device, it tried to find out what should have been there, and writes it over the bad block. For some media-errors, this has a reasonable chance of fixing the error. If the write succeeds, and a subsequent read succeeds as well, raid5 decided the address is OK and conitnues. Instead of failing a drive on read-error, we attempt to re-write the block, and then re-read. If that all works, we allow the device to remain in the array. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] fbdev: move ioctl32 code to fbmem.cArnd Bergmann
The frame buffer layer already had some code dealing with compat ioctls, this patch moves over the remaining code from fs/compat_ioctl.c Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] fbcon: Console Rotation - Add ability to control rotation via sysfsAntonino A. Daplas
Add ability to set rotation via sysfs. The attributes are located in /sys/class/graphics/fb[n] and accepts 0 - unrotated; 1 - clockwise; 2 - upside down; 3 - counterclockwise. The attributes are: con_rotate (r/w) - set rotation of the active console con_rotate_all (w) - set rotation of all consoles rotate (r/w) - set rotation of the framebuffer, if supported. Currently, none of the drivers support this. This is probably temporary, since con_rotate and con_rotate_all are console-specific and has no business being under the fb device. However, until the console layer acquires it's own sysfs class, these attributes will temporarily reside here. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] fbcon: Console Rotation - Add support to rotate the logoAntonino A. Daplas
Add support for rotating and positioning of the logo. Rotation and position depends on 'int rotate' parameter added to fb_prepare_logo() and fb_show_logo(). Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotationAntonino A. Daplas
This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] V4L: 911: added support for ntsc 4.43 video standardTyler Trafford
Added support for NTSC 4.43 video standard. Signed-off-by: Tyler Trafford <tatrafford@comcast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] V4L: 907: em28xx cleanups and fixesMauro Carvalho Chehab
- Em28xx cleanups and fixes. - Some cleanups and audio amux adjust. - em28xx will allways try, by default, the biggest size alt. - Fixes audio mux code. - Fixes some logs. - Adds support for digital output for WinTV USB2 board. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] V4L: 904: added dvb support for tda8275a philips tiger reference designHartmut Hackmann
Added dvb support for tda8275a (Philips Tiger reference design) Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 899: remove media id.hMauro Carvalho Chehab
- Removed media id.h file Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 897: saa7146 fixMauro Carvalho Chehab
- Fixing headers to compile cleanly. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 887: i2c id h updated to reflect the newer driversMauro Carvalho Chehab
- I2c-id.h Updated to reflect the newer drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 885: second round of i2c ids redefinition cleanupJean Delvare
- Second round of i2c IDs redefinition cleanup. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 876: moved some user defines to be out of kernel defineMichael Schimek
- Moved some user defines to be out of __KERNEL__ define. Signed-off-by: Michael Schimek <mschimek@gmx.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 829: fixed user mode compilingMauro Carvalho Chehab
- Fixed user mode compiling. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 826: unify whitespacesNickolay V. Shmyrev
- Unify whitespaces. Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 815: commented obsoleted stuff at videodev headersMauro Carvalho Chehab
- Commented obsoleted stuff at videodev headers. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 809: some changes to allow compiling cx88 and saa7134Mauro Carvalho Chehab
- Some changes to allow compiling cx88 and saa7134 without V4L1 support. - This patch will help obsoleting V4L1 API. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 806: add support for tda8275aHartmut Hackmann
- Add support for tda8275a Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 801: whitespaces cleanupsMauro Carvalho Chehab
- Whitespaces Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 800: whitespace cleanupsMauro Carvalho Chehab
- Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 798: this patch adds the vidioc log status to videodev2 h and addsHans Verkuil
- This patch adds the VIDIOC_LOG_STATUS to videodev2.h and adds LOG_STATUS support to tda9887.c and bttv-driver.c. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 795: new config option for tda9887 to specifically set intercarrierNickolay V. Shmyrev
- New config option for tda9887 to specifically set intercarrier Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 784: several improvement on i2c ir handling for em2820Mauro Carvalho Chehab
- Several Improvement on I2C IR handling for em2820: - moved Pinnacle IR table (ir_codes_em2820) to em2820-input.c - IR struct renamed and moved to a header file. - New file to handle em2820-specific IR. - Some cleanups. - attach now detects I2C IR and calls em2820-specific IR code - IR compat code moved to compat.h - New header with struct IR_i2c there, to allow it to be used by board-specific input handlers. - Some improvements at em28xx board detection: - Board detection message improved to show interface and class. - Now it doesn't touch audio interfaces. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 763: include newer i2c id at linux include media id hHans Verkuil
- Include newer I2C ID at ../linux/include/media/id.h: Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 712: added analog support for ati hdtv wonderKirk Lapray
- Added analog support for ATI HDTV Wonder Signed-off-by: Kirk Lapray <kirk.lapray@gmail.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>