aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2007-05-10ide: make /proc/ide/ optionalBartlomiej Zolnierkiewicz
All important information/features should be already available through sysfs and ioctl interfaces. Add CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option, disabling it makes IDE driver ~5 kB smaller (on x86-32). While at it add CONFIG_PROC_FS=n versions of proc_ide_{create,destroy}() and remove no longer needed #ifdefs. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: add ide_tune_dma() helperBartlomiej Zolnierkiewicz
After reworking the code responsible for selecting the best DMA transfer mode it is now possible to add generic ide_tune_dma() helper. Convert some IDE PCI host drivers to use it (the ones left need more work). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: rework the code for selecting the best DMA transfer mode (v3)Bartlomiej Zolnierkiewicz
Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: fix UDMA/MWDMA/SWDMA masks (v3)Bartlomiej Zolnierkiewicz
* use 0x00 instead of 0x80 to disable ->{ultra,mwdma,swdma}_mask * add udma_mask field to ide_pci_device_t and use it to initialize ->ultra_mask in aec62xx, cmd64x, pdc202xx_{new,old} and piix drivers * fix UDMA masks to match with chipset specific *_ratemask() (alim15x3, hpt366, serverworks and siimage drivers need UDMA mask filtering method - done in the next patch) v2: * piix: fix cable detection for 82801AA_1 and 82372FB_1 [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] * cmd64x: use hwif->cds->udma_mask [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] * aec62xx: fix newly introduced bug - check DMA status not command register [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * piix: use hwif->cds->udma_mask [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-08m68k: <asm/scatterlist.h> needs <linux/types.h>Geert Uytterhoeven
The recent <linux/pci.h> cleanup uncovered that include/asm-m68k/scatterlist.h needs to include <linux/types.h> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08FRV: Miscellaneous fixesDavid Howells
Miscellaneous fixes to bring FRV up to date: (1) Copy the new syscall numbers from i386 to asm-frv/unistd.h and fill out the syscall table in entry.S too. (2) Mark __frv_uart0 and __frv_uart1 __pminitdata rather than __initdata so that determine_clocks() can access them when CONFIG_PM=y. (3) Make arch/frv/mm/elf-fdpic.c include asm/mman.h so that MAP_FIXED is available (fixes commit 2fd3bebaad9da3b3b99c46a3389099424bf7ee35). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Optimize fault kprobe handling just like powerpc. [SPARC]: Wire up utimensat syscall. [SPARC64]: Fix request_irq() ignored result warnings in PCI controller code. [SPARC64]: Kill asm-sparc64/pbm.h [ATYFB]: Fix sparc includes. [QLA2XXX]: Fix build on sparc. [SPARC64]: Removal of trivial pci_controller_info uses. [SPARC64]: Move index info pci_pbm_info. [SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info. [SPARC64]: Move pci_ops into pci_pbm_info. [SPARC64] SBUS: Error interrupt registry cleanups. [SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's [SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX. [SPARC64] PCI: Use common routine to fetch PBM properties.
2007-05-08Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (58 commits) [SCSI] zfcp: clear boxed flag on unit reopen. [SCSI] zfcp: clear adapter failed flag if an fsf request times out. [SCSI] zfcp: rework request ID management. [SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI [SCSI] zfcp: Locking for req_no and req_seq_no [SCSI] zfcp: print S_ID and D_ID with 3 bytes [SCSI] ipr: Use PCI-E reset API for new ipr adapter [SCSI] qla2xxx: Update version number to 8.01.07-k7. [SCSI] qla2xxx: Add MSI support. [SCSI] qla2xxx: Correct pci_set_msi() usage semantics. [SCSI] qla2xxx: Attempt to stop firmware only if it had been previously executed. [SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings. [SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA initialization. [SCSI] zfcp: Stop system after memory corruption [SCSI] mesh: cleanup variable usage in interrupt handler [SCSI] megaraid: replace yield() with cond_resched() [SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n [SCSI] aacraid: correct SUN products to README [SCSI] aacraid: superfluous adapter reset for IBM 8 series ServeRAID controllers [SCSI] aacraid: kexec fix (reset interrupt handler) ...
2007-05-08[SPARC64]: Optimize fault kprobe handling just like powerpc.David S. Miller
And eliminate DIE_GPF while we're at it. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08[SPARC]: Wire up utimensat syscall.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08[SPARC64]: Kill asm-sparc64/pbm.hDavid S. Miller
Everything it contains can be hidden in pci_impl.h Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08[SPARC64]: Move index info pci_pbm_info.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08[SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08[SPARC64]: Move pci_ops into pci_pbm_info.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08[SPARC64] PCI: Use root list of pbm's instead of pci_controller_info'sDavid S. Miller
The idea is to move more and more things into the pbm, with the eventual goal of eliminating the pci_controller_info entirely as there really isn't any need for it. This stage of the transformations requires some reworking of the PCI error interrupt handling. It might be tricky to get rid of the pci_controller_info parenting for a few reasons: 1) When we get an uncorrectable or correctable error we want to interrogate the IOMMU and streaming cache of both PBMs for error status. These errors come from the UPA front-end which is shared between the two PBM PCI bus segments. Historically speaking this is why I choose the datastructure hierarchy of pci_controller_info-->pci_pbm_info 2) The probing does a portid/devhandle match to look for the 'other' pbm, but this is entirely an artifact and can be eliminated trivially. What we could do to solve #1 is to have a "buddy" pointer from one pbm to another. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08[SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX.David S. Miller
They are totally unused. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08[SPARC64] PCI: Use common routine to fetch PBM properties.David S. Miller
Namely bus-range and ino-bitmap. This allows us also to eliminate pci_controller_info's pci_{first,last}_busno fields as only the pbm ones are used now. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08disable socket power in adapter driver instead of media oneAlex Dubov
Socket power must be fully controlled by adapter driver. This also prevents unnecessary power-off of the socket when media driver is unloaded, yet media remains in the socket. Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-08Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (32 commits) Use menuconfig objects - hwmon hwmon/smsc47b397: Use dynamic sysfs callbacks hwmon/smsc47b397: Convert to a platform driver hwmon/w83781d: Deprecate W83627HF support hwmon/w83781d: Use dynamic sysfs callbacks hwmon/w83781d: Be less i2c_client-centric hwmon/w83781d: Clean up conversion macros hwmon/w83781d: No longer use i2c-isa hwmon/ams: Do not print error on systems without apple motion sensor hwmon/ams: Fix I2C read retry logic hwmon: New AD7416, AD7417 and AD7418 driver hwmon/coretemp: Add documentation hwmon: New coretemp driver i386: Use functions from library in msr driver i386: Add safe variants of rdmsr_on_cpu and wrmsr_on_cpu hwmon/lm75: Use dynamic sysfs callbacks hwmon/lm78: Use dynamic sysfs callbacks hwmon/lm78: Be less i2c_client-centric hwmon/lm78: No longer use i2c-isa hwmon: New max6650 driver ...
2007-05-08Merge branch 'reset-seq' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'reset-seq' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata reset-seq] build and merge fixes libata: reimplement reset sequencing libata: improve ata_std_prereset() libata: improve 0xff status handling libata: add deadline support to prereset and reset methods
2007-05-08Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits) [netdrvr] atl1: fix build pasemi_mac: Use local-mac-address instead of mac-address if available pasemi_mac: PHY support pasemi_mac: Add msglevel support and "debug" module param pasemi_mac: Logic cleanup / rx performance improvements pasemi_mac: Minor cleanup / define fixes pasemi_mac: Add SKB reuse / copy-break pasemi_mac: Timer and interrupt fixes pasemi_mac: Abstract and fix up interrupt restart routines pasemi_mac: Move the IRQ mapping from the PCI layer to the driver tc35815: Remove unnecessary skb->dev assignment drivers/net/dm9000: Convert to generic boolean AT91RM9200 Ethernet: Fix multicast addressing AT91RM9200 Ethernet: Support additional PHYs PCMCIA-NETDEV : xirc2ps_cs: bugfix of multicast code sky2: re-enable 88E8056 for most motherboards MIPS: Drop unnecessary CONFIG_ISA from RBTX49XX ne: MIPS: Use platform_driver for ne on RBTX49XX ne: Add NEEDS_PORTLIST to control ISA auto-probe ne: Misc fixes for platform driver. ... Fix conflict in drivers/net/pasemi_mac.c (get_property() got renamed to of_get_property()) manually. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: Input: move USB miscellaneous devices under drivers/input/misc Input: move USB mice under drivers/input/mouse Input: move USB gamepads under drivers/input/joystick Input: move USB touchscreens under drivers/input/touchscreen Input: move USB tablets under drivers/input/tablet Input: i8042 - fix AUX port detection with some chips Input: aaed2000_kbd - convert to use polldev library Input: drivers/usb/input - usb_buffer_free() cleanup Input: synaptics - don't complain about failed resets Input: pull input.h into uinpit.h Input: drivers/usb/input - fix sparse warnings (signedness) Input: evdev - fix some sparse warnings (signedness, shadowing) Input: drivers/joystick - fix various sparse warnings Input: force feedback - make sure effect is present before playing
2007-05-08Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits) [POWERPC] Abolish powerpc_flash_init() [POWERPC] Early serial debug support for PPC44x [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc [POWERPC] Add device tree for Ebony [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now [POWERPC] MPIC U3/U4 MSI backend [POWERPC] MPIC MSI allocator [POWERPC] Enable MSI mappings for MPIC [POWERPC] Tell Phyp we support MSI [POWERPC] RTAS MSI implementation [POWERPC] PowerPC MSI infrastructure [POWERPC] Rip out the existing powerpc msi stubs [POWERPC] Remove use of 4level-fixup.h for ppc32 [POWERPC] Add powerpc PCI-E reset API implementation [POWERPC] Holly bootwrapper [POWERPC] Holly DTS [POWERPC] Holly defconfig [POWERPC] Add support for 750CL Holly board [POWERPC] Generalize tsi108 PCI setup [POWERPC] Generalize tsi108 PHY types ... Fixed conflict in include/asm-powerpc/kdebug.h manually Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08s3fb: updatesOndrej Zajicek
Move s3fb_get_tilemax to svgalib.c as svga_get_tilemax, because it reports limitation of other code from svgalib (svga_settile, svga_tilecopy, ...) Limit font width to 8 pixels in 4 bpp mode. Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08use mutex instead of semaphore in virtual console driverMatthias Kaehlcke
The virtual console driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08atyfb: halve XCLK with Mobility and 32bit memoryVille Syrjala
Laptops with Rage Mobility and 32bit memory interface seem to require halved XCLK to operate correctly. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: fbcon: check if mode can handle new screenAntonino A. Daplas
Check if the mode can properly display the screen. This will be needed by drivers where the capability is not constant with each mode. The function fb_set_var() will query fbcon the requirement, then it will query the driver (via a new hook fb_get_caps()) its capability. If the driver's capability cannot handle fbcon's requirement, then fb_set_var() will fail. For example, if a particular driver supports 2 modes where: mode1 = can only display 8x16 bitmaps mode2 = can display any bitmap then if current mode = mode2 and current font = 12x22 fbset <mode1> /* mode1 cannot handle 12x22 */ fbset will fail Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08pm2fb: Permedia 2V memory clock settingKrzysztof Helt
Permedia 2V uses its own registers to set a memory clock. The patch adds these registers and uses them in the set_memclock() function. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: add tile operation to get the maximum length of the mapAntonino A. Daplas
Add a tile method, fb_get_tilemax(), that returns the maximum length of the tile map (or font map). This is needed by s3fb which can only handle 256 characters. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbcon: font setting should check limitation of driverAntonino A. Daplas
fbcon_set_font() will now check if the new font dimensions can be drawn by the driver (by checking pixmap.blit_x and blit_y). Similarly, add 2 new parameters to get_default_font(), font_w and font_h, to further aid in the font selection process. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: advertise limitation of drawing engineAntonino A. Daplas
A few drivers are not capable of blitting rectangles of any dimension. vga16fb can only blit 8-pixel wide rectangles, while s3fb (in tileblitting mode) can only blit 8x16 rectangles. For example, loading a 12x22 font in vga16fb will result in a corrupt display. Advertise this limitation/capability in info->pixmap.blit_x and blit_y. These fields are 32-bit arrays (font max is 32x32 only), ie, if bit 7 is set, then width/height of 7+1 is supported. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: add fb_read/fb_write functions for framebuffers in system RAMAntonino A. Daplas
The functions fb_read() and fb_write in fbmem.c assume that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb) where the framebuffer is allocated from system RAM (via vmalloc). Using __raw_read/__raw_write (fb_readl/fb_writel) for these drivers is illegal, especially in other platforms. Create file read and write methods for these types of drivers. These are named fb_sys_read() and fb_sys_write(). Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: pass struct fb_info to fb_read and fb_writeAntonino A. Daplas
It is unnecessary to pass struct file to fb_read() and fb_write() in struct fb_ops. For consistency with the other methods, pass struct fb_info instead. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: add drawing functions for framebuffers in system RAMAntonino A. Daplas
The generic drawing functions (cfbimgblt, cfbcopyarea, cfbfillrect) assume that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb) where the framebuffer is allocated from system RAM (via vmalloc). Using _raw_read/write and family for these drivers (as used in the cfb* functions) is illegal, especially in other platforms. Create 3 new drawing functions, based almost entirely from the original except that the framebuffer memory is assumed to be in system RAM. These are named as sysimgblt, syscopyarea, and sysfillrect. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vt: add color support to the "underline" and "italic" attributesJan Engelhardt
Add color support to the "underline" and "italic" attributes as in OpenBSD/NetBSD-style (vt220) and xterm. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Acked-by: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08tgafb: TURBOchannel supportMaciej W. Rozycki
This is support for the TC variations of the TGA boards (properly known as SFB+ or Smart Frame Buffer Plus boards). The 8-plane SFB+ board uses the Bt459 RAMDAC (unlike its PCI TGA counterpart, which uses the Bt485), so bits have been added to support this chip as well. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: James Simmons <jsimmons@infradead.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fb: fsync() method for deferred I/O flush.Paul Mundt
There are cases when we do not want to wait on the delay for automatically updating the "real" framebuffer, this implements a simple ->fsync() hook for explicitly flushing the deferred I/O work. The ->page_mkwrite() handler will rearm the work queue normally. (akpm: nuke unneeded ifdefs, forward-delcare struct dentry) Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: mm: Deferred IO supportJaya Kumar
This implements deferred IO support in fbdev. Deferred IO is a way to delay and repurpose IO. This implementation is done using mm's page_mkwrite and page_mkclean hooks in order to detect, delay and then rewrite IO. This functionality is used by hecubafb. [adaplas] This is useful for graphics hardware with no directly addressable/mappable framebuffer. Implementing this will allow the "framebuffer" to be accesible from user space via mmap(). Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08fbdev: display classJames Simmons
Add the new display class. This is meant to unite the various solutions to display units ie acpi output device, auxdisplay and the defunct lcd class in the backlight directory. Signed-off-by: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Char: cyclades, dynamic portsJiri Slaby
and save thus approx. 160k of .bss Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Char: cyclades, remove unused timestampsJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Char: cyclades, remove sleep_onJiri Slaby
convert to wait_* and completion Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Char: cyclades, make info->card a pointerJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Char: cyclades, remove useless fileds from cyclades_cardJiri Slaby
pde, ctl_phys and base_phys are useless -- they are never used. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Char: cyclades, unexport struct cyclades_cardJiri Slaby
Do not export internal card data to userspace. cytune doesn't use this anyway. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08x86, serial: convert legacy COM ports to platform devicesBjorn Helgaas
Make x86 COM ports into platform devices and don't probe for them if we have PNP. This prevents double discovery, where a device was found both by the legacy probe and by 8250_pnp, e.g., serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A This also means IRDA devices without a UART PNP ID will no longer be claimed by the serial driver, which might require changes in IRDA drivers and administration. In addition to this patch, you may need to configure a setserial init script, e.g., /etc/init.d/setserial, so it doesn't poke legacy UART stuff back in. On Debian, "dpkg-reconfigure setserial" with the "kernel" option does this. To force the old legacy probe behavior even when we have PNPBIOS or ACPI, load the new legacy_serial module (or build 8250 static) with the "legacy_serial.force" option. [akpm@linux-foundation.org: fix makefiles] Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Keith Owens <kaos@ocs.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthieu CASTET <castet.matthieu@free.fr> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Russell King <rmk+serial@arm.linux.org.uk> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08PNP: notice whether we have PNP devices (PNPBIOS or PNPACPI)Bjorn Helgaas
This series converts i386 and x86_64 legacy serial ports to be platform devices and prevents probing for them if we have PNP. This prevents double discovery, where a device was found both by the legacy probe and by 8250_pnp. This also prevents the serial driver from claiming IRDA devices (unless they have a UART PNP ID). The serial legacy probe sometimes assumed the wrong IRQ, so the user had to use "setserial" to fix it. Removing the need for setserial to make IRDA devices work seems good, but it does break some things. In particular, you may need to keep setserial from poking legacy UART stuff back in by doing something like "dpkg-reconfigure setserial" with the "kernel" option. Otherwise, the setserial-discovered "UART" will claim resources and prevent the IRDA driver from loading. This patch: If we can discover devices using PNP, we can skip some legacy probes. This flag ("pnp_platform_devices") indicates that PNPBIOS or PNPACPI is enabled and should tell us about builtin devices. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Keith Owens <kaos@ocs.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthieu CASTET <castet.matthieu@free.fr> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Russell King <rmk+serial@arm.linux.org.uk> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Char: cyclades, cy_readX/writeX cleanupJiri Slaby
cyclades, cy_readX/writeX cleanup - cy_readX are placeholders for readX, remove it - move cy_writeX macros into do {} while(0) to be safe Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Add IRQF_IRQPOLL flag (common code)Bernhard Walle
irqpoll is broken on some architectures that don't use the IRQ 0 for the timer interrupt like IA64. This patch adds a IRQF_IRQPOLL flag. Each architecture is handled in a separate pach. As I left the irq == 0 as condition, this should not break existing architectures that use timer_irq == 0 and that I did't address with that patch (because I don't know). This patch: This patch adds a IRQF_IRQPOLL flag that the interrupt registration code could use for the interrupt it wants to use for IRQ polling. Because this must not be the timer interrupt, an additional flag was added instead of re-using the IRQF_TIMER constant. Until all architectures will have an IRQF_IRQPOLL interrupt, irq == 0 will stay as alternative as it should not break anything. Also, note_interrupt() is called on CPU-specific interrupts to be used as interrupt source for IRQ polling. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Grant Grundler <grundler@google.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08nfs: fix congestion control: use atomic_longsPeter Zijlstra
Change the atomic_t in struct nfs_server to atomic_long_t in anticipation of machines that can handle 8+TB of (4K) pages under writeback. However I suspect other things in NFS will start going *bang* by then. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 23:52:28 +0000